After installing itunes 11.1 on windows 8 the programm crashes
after installing the update 11.1 the programm crashes every time I try to open it.
It's a windows 8 64 bit version.
I think mine is doing the same thing. My library loads fine, but when I try to switch to the store it comes up with an error message. The error report forces itunes to close. I tied deleting and re-downloading itunes again but had no success. Some help would be much appreciated.
Similar Messages
-
How do I have itunes use/detect my external hard drive and place music on the external drive from the itunes store? There are no music files on my pc yet. I will like to do this after installing itunes 11 on my pc for the first time. I am using windows 7. HP computer intel Dual Core. Thanks for any help!
Hey idw3,
Welcome to Apple Support Communities, and thanks for the question. Follow the instructions on this article to move your iTunes Media folder to an external hard drive:
iTunes for Windows: Moving your iTunes Media folder
http://support.apple.com/kb/HT1364
Regards,
David -
ITunes Error 7 (Windows error 127) after installing iTunes 64-bit for Windows
After installing iTunes 64-bit for Windows (latest build), I get an error pop-up saying:
iTunes was not installed correctly. Please reinstall iTunes
Error 7 (Windows error 127)
I've gone thru the uninstall, reboot and reinstall process three or four times now. Still nothing.
Furthermore, after clicking okay to the error, it continues to pop up on it's own every 45 seconds or so.
There was one other error I came across after trying to launch iTunes after installation.
See both error messages here:
http://screencast.com/t/DSg4PpKF5BeXBrilliant. Thanks a lot. I've wasted a couple of hours on this nasty bug, & trying all the other suggestions across various threads again and again.
I now find I had the same registry entry hanging on, despite uninstalling & wiping everything again and again. Having now deleted this key, (I don't even have an iPod), & iTunes 11.1.14 now opens at long last.
But WHY is this bug not fixed? Enough people are suffering with this across the forum. WHERE is Apple support on this?
It should have been added to their page at
http://support.apple.com/kb/HT1923
by now, why hasn't it???
It's not good enough!
Re:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\SharedDlls]
"C:\\Program Files\\iPod\\bin\\iPodService.exe"=dword:80000000
AHA! This entry for iPodService.exe still exhisted. So I had no folders on the PC, no installs on the PC and no services running.... BUT this was still in the Registry.
Step 5 - Delete only the Registry entry above. NO REBOOT
Step 6 - Reinstall iTunes64.exe -
Macbook with osx 10.6.8 crashes in the album mode(middle one) after installing itunes 10.6? It still crashes if I open itunes in the sfe mode.
iTUNES 10.6.1.7
How do I restore the original iTUNES that recognizes our music libraries and our iPODS?
Thanks for your consideration.
Message was edited by: mrtruffles -
I have an iPod Classic and work on Windows 7.
i recently installed iTunes 10.5 update and since then i cannot play any of the songs in the Library - i get the following message
"The song could not be used because the original file could not be found. Would you like to locate it?"
what happened to all my songs (almost 2000) How can i get them back into my music library?
Please help - i do not want to spend another week downloading all my cd's onto my computer !!!!!Try my script FindTracks. Select a few of the missing files to start with then run the script. Choose No at the first prompt so that you can check how it works track by track, then confirm or edit the location of the media folder where your files are. Once you are happy with how it behaves let it process larger numbers of tracks automatically.
tt2 -
When installing itunes of my PC with Windows Vista, the itunes program "took over" all of my desktop icons. How can I install it so it doesn't do that? Thanks!
You can force Vista to rebuild the desktop icons by changing your monitor's color depth momentarily. In the display properties, change to 16-bit color. Then change back to 32-bit.
-
After installing 8.2 on my iPad (2nd gen) all the apps crash during use. It appears that the iPad saves a version of what I was using because after the app crashes I double press the home button an there is a screen of an older version of the page I was using. I swipe it away and start over, only to have the same thing happen again. I have reinstalled all the apps, rebooted, synced and re-synced with iTunes. This is VERY irritating!
That's one of the weird things.. it recognizes it maybe 10% of the time. And usually, only after I do the two-button reset. Problem is.. since it won't charge above 2%, anytime I try to do a restore or anything like that using iTunes, my device shuts off and I lose whatever progress I'd made.
So, an update... after reading through a bunch of similar complaints (there are literally 1000's of them so there's NO WAY this isn't somehow ios7 related, thanks a lot APPLE ) I decided to try a restore in recovery mode. After 3 hours and several disconnections... I ended up having to just set it up as a new iPad, as the restore did nothing. Weirdly though... as I was doing the restore in recovery mode.. I noticed I'd gotten up to a 10% charge.. higher than it's been since September, so after setting it up as a new device, I turned it off and plugged it in using the wall charger. 2 hours later and I was up to 38%. Still not great, as my iPad, before ios7 could've fully charged twice in the amount of time it took for me to now get 28% more of a charge. And that's with a fully cleaned out device.. so that really ***** and I'm now more confused than ever.
But I'm gonna leave it overnight charging and see what I come up with tomorrow. Sadly, when I paid $600 for it in February, I never expected to have to play "wait and see" with it... -
I just received a new laptop running windows 7 home premium and wanted to install Firefox on it. I tried to install the most recent version. When i installed 6.0.2, the icon did not appear on my desktop (it was a hidden file in my desktop folder) and the program group does not appear in the start menu's All Programs list. The program *does* run though, at least it did a few times. This happened whether i installed as administrator or not. Installing firefox 3.6.22, though, DID create the program group and desktop icon, and upgrading from there removed them again. installing other programs (e.g. vlc, trillian, etc.) did not cause this behavior. I also tried this both with and without McAfee's realtime protection running.
Some people have found that an app (usually iBooks for some reason) hasn't appeared on a homescreen until after the iPad has been reset and has restarted : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
Also depending on what the app is have you got an age rating set in Settings > General > Restrictions that is hiding it ? -
After installing iTunes 10, external drive error
The library which the previous iTunes 9 was connected to is on my external WD 2TB drive. After installing iTunes 10, I played around with the interface for a few minutes, and then I shut my computer off.
This morning, I turned on my computer and my external drive loaded up. But when it opened iTunes and started reading, the external started to be read, and it ejected automatically... and error window popped up warning me that it wasn't ejected properly.
From then on, this kept on occurring. The drive loads up but after a few minutes it gets ejected again. I don't know what happened.
I checked with Disk Utilities, and there was zero problems.
Could someone help me with this problem? I have changed to different firewire cables from very short, to long etc but still the same issues. I don't want to keep doing this as it might corrupt all my data...many years of of collected photos, music, movies etc...as well as a major part of my work files.
This is so sad, and I just wished I bought a second drive to clone the one I have. Lesson learnt.Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe, and select "Extract to iTunesSetup". WinRAR will expand the contents of the file into a folder called "iTunesSetup".
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, does iTunes launch properly now?
If instead you get an error message during the install, let us know what it says. (Precise text, please.) -
Whilst I'm installing ITunes v.11 in Windows 7...
Whilst I'm installing ITunes v.11 in Windows 7, the process almost completes fully, but for 1 error message which pops up right at the end...it doesn't seem to affect use of the program to much, but I've found out that it needs a program called bojour, which enables communication between my pc and the ITunes Store...It does also suggest that I check "my privaleges" which I find confusing...
This is the actual wording that's displayed when it pops up.
Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privilages to start system services.
Does anyone know where and how I can find in windows 7, how I can view and change my privileges to have a successful installation.
I installed the v.9 first, took that off,done a complete system "spring clean-up", got rid of ell the gunk or unwanted files that clog up my registry, then I de-fgragged my entire registry, scanned my hard drives for viruses with Norton Internet Security 2012, and basically, made sure that what shouldn't have been there, WASN'T there and was gone...
But then, I re-installed ITunes v.11 again, but to no avail, this error message still kept popping up.
If anyone can help...THEN PLEASE DO...
You can contact me through...
TWITTER
@cjspiritmedium
GOOGLE BLOGGER
http://www.cjspiritmedium.blogspot.com
Thank YouFurther on from this first question I've just asked...I am now getting a 2nd error message pop up at me, but this time, I have an error number to give out...
The number is: 42404, which tells me of a missing oart that's not been installed in my copy of ITunes...It doesn't state exactly what this part is or what function it's part plays with this program, and what it's connection to it is...and yet again, it doesn't seem to de-stabalise or corrupt the program in any way...
So if anyone knows what this error message refers to.....and what it means, then please reply back ASAP...
Thank You... -
Windows 8.1 Pro will not boot after installing iTunes 11.1.5.5
It's a little hard for me to accept that this is true, but the symptoms seem to be pointing the direction of the title of this thread. I have an all-in-one touch-screen Gateway computer that came with windows 7 (yeah, a win7 machine that came with touch, yeesh) and I put windows 8.1 pro 64-bit on it with a clean install (actually windows 8 was the clean install and then I did the free microsoft store upgrade to 8.1). It has 4GB of RAM and has a Pentium Dual Core cpu @ 2.2 Ghz. It was running fine with the previous version of iTunes, but as soon as I updated to iTunes 11.1.5.5 (and there may have been other apple things that updated too (ie quicktime of course), the computer prompted me for a reboot and froze during the reboot process (before it even shut down). Then it had trouble booting into windows. I ran startup repair to no avail and decided to do a sytem restore. My most recent restore point was from a few weeks back, before iTunes was even installed at all on the machine. I went back to that point and the machine worked fine again. Then I installed iTunes 11.1.5.5 and the same exact problem occurred - it froze while shutting down after the iTunes install and then would not boot into windows 8. I did another system restore and have not put iTunes back on. The system is working fine. I'm going to try to find out if there's a way to download older versions of iTunes, so that I can install it, but the bigger issue here is: Is this a legitimate bug/incompatibility with some hardware or software or driver that I have on this computer? I run a computer support business so I know my way around but I don't have time to troubleshoot this from scratch. Anyone else seeing this? Apple employees...a little help here? Any input?
let it sit for about 30 min and still got nothing
I then did a "hard shutdown(just pressed power button till it turned off the computer)"
That may not have been long enough. But a "hard shutdown" would definitely have been construed as a problem due to the update.
Asus apparently is a known problem case...
http://blogs.msdn.com/b/usbcoreblog/archive/2013/10/19/help-after-installing-windows-8-1-the-superspeed-ports-of-my-asus-system-don-t-work.aspx
Link courtesy Darrell Gorter [MSFT] found here
"Windows 8 Keyboard and mouse not working"
http://social.technet.microsoft.com/Forums/en-US/w8itprohardware/thread/06e9b341-0619-4085-acbf-e2f0133ca428?outputAs=rss
(RSS given to avoid overhead of opening long thread for IE users)
Note that there may be useful tips for you in both of those threads' comments.
Robert Aldwinckle -
After installing itunes 10 installation was successful but then tells me error 2 (windows error 2).
Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe, and select "Extract to iTunesSetup". WinRAR will expand the contents of the file into a folder called "iTunesSetup".
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, does iTunes launch properly now?
If instead you get an error message during the install, let us know what it says. (Precise text, please.) -
After installing itunes Windows 7 doesnt boot and stalls while loading atipcie.sys driver
After installing itunes my computer stalls when loading atipcie.sys driver. Computer will not boot up in safe mode or Last known good. Only resolution was to perform System Restore to a time before itunes was installed, thus deleting the itunes installation
Anyone know of a fix or workaround for this issue ?Windows 7 64 bit core i7
BSOD while updating to iTunes 10 with suspended installation of Apple Mobile Device Support. Network drivers no longer working as a result. Attempted fix by downloading from a different machine and competing install via files transferred over on flash drive. No dice. Attempted removal of iTunes, QuickTime, Apple Mobile Device Support, Apple Application Support, Apple Software Update to see if this would fix. Followed this up with a restart. This seems to have improved matters as system is starting up faster. No dice. Try reinstall network drivers from Sony ViaoCare disk. Installed and restarted. No dice. Next, try Widows 7 Network and Sharing diagnostics. No dice. Next try manual removal & reinstall of network driver using Device Manager, restart. Can't seem to re-install Network Controller. Still trying to solve this. -
Windows error after installing itunes 8.0.2.20.
I' ve a problem after installing Itunes 8.0.2.20.
When i try to use Itunes i get the message windows with a log and use of itunes is broken.Might have been a bad cable. I reinstalled. Got a crash again. Tried a different cable. It worked.
-
Windows 7 BSOD randomly occuring after installing iTunes 10.6 with iPhone 4 in dock
After installing iTunes 10.6 and IOS 5.1 on my iPhone 4, Windows 7 computer was randomly blue screening with the iPhone 4 in the attached dock. After removing the phone from the dock, system works fine.
Re-installed iTunes as you suggested and it worked. However, started experiencing random BSOD's. Disk check found a number of file errors on the boot drive - which it fixed. It then took a number of re-boots before computer became stable.
Then, upgraded iTunes on a HP workstation (no iPhone attached). On reboot windows had to attempt a boot repair 3 times before it would reboot. Couldn't even do a disk check without first reverting to the last restore point. It also corrupted Norton. The end result was 2.5 hours of wasted time.
Being an expert pc user, I can safely say that I believe Apple has some serious issues with 10.6.
Maybe you are looking for
-
Hi, My printer was working earlier this morning but now none of the office computers are able to print any jobs. I ran a Wireless Network Test report and everything is fine. I also ran a configuration report and nothing shows up as an issue.
-
I would like to add text to a sales order in such a manner that the customer service people can read them , but i do not want those text items to print on shipment or invoice. Can anyone point me in the right direction. Please note we are on version
-
Why isin't 'Call of duty modern warfare 3' compatible for mac honestly do you know how much money you would get on Mac Apple Store then people won't want a windows anymore since most of the people or young people use windows for games honestly Mac ca
-
HI Guys, I am new bie to photoshop and trying to automate our photoshop work flows using c#. I am successfully written automated work flow but I its taking 2 min to edit one graphic content and export into PDF file. Please advice me how can I scale a
-
OracleXML SQL utility out of memory
when selecting from a latge table. What can I do to fix this: java.lang.OutOfMemoryError I would appreciate any input.