After Installing Itunes 64 bit  11 on my  windows8 computer no thing

I installed I Tunes 11.3 on my 64 bit Windows 8 computer. The Program fails to launch after 3 downloads and 10 attempts I am frustrated. Is there any way I can over come this problem. Thanks for any help.
Fran Ciurczak
[email protected]

I just posted a similar thread here https://discussions.apple.com/thread/5091886, since we are both on 64 bit Windows, I think we might have the same problem.

Similar Messages

  • After Installing iTunes, every other program on computer becomes iTunes?!?!

    I have a brand new Acer Aspire laptop. I installed the newest iTunes 9.2 and it worked fine for about a week. I turned on my laptop, and every program's icon was the iTues icon and when I tried to open any of the programs, iTunes would open.

    I just posted a similar thread here https://discussions.apple.com/thread/5091886, since we are both on 64 bit Windows, I think we might have the same problem.

  • After installing itunes and restarting computer, blue error screen comes up

    After I installed itunes 9 and restarting my computer a blue error screen came up. I had to restart my computer in safe mode and restore. Now itunes will not work. I have tried uninstalling and reinstalling various itunes, ipod, apple...etc programs and i get the blue error message again. HELP!

    What version of iTunes is installed in the Apple default location ..... /Applications/iTunes ???
    Drag the iTunes icon in the Dock to the Desktop and release; it will be deleted with a poof! Don't worry it's only an alias.
    In your Home Page ~/Library/Preferences/ ......... drag to the Trash and delete:
    com.apple.iTunes.plist and com.apple.iTunesHelper.plist
    (don't worry ... new ones will be created upon relaunch of iTunes .... +see below+)
    Using: /Applications/Utilities/Disk Utility/Repair Permissions
    RESTART the computer
    Within the Applicatons folder: double-click the iTunes icon ... if the launch is successful, drag a copy of the iTunes icon to the Dock ... release ... you will now have a current alias in the Dock.
    P.S. *Do Not* have the iPod connected to the computer during this process!
    DIXIE

  • Please could you advise? ... After installing Itunes 11.3.1.2 on my Laptop and when reconnecting my iPad2 via USB, it is no longer visible under 'My Computer'. Any advice on resolving this issue would be most welcome. Thanks

    Please could you advise? ... After installing Itunes 11.3.1.2 on my Laptop and when reconnecting my iPad2 via USB, it is no longer visible under 'My Computer'. Any advice on resolving this issue would be most welcome. Thanks

    Any one or a combo may help
    Give your iPad a reset. Hold down the sleep and home  keys for about 20 seconds. When you see the silver apple, let go and let it reboot and try again.
    Try a different USB cord
    Try a different USB port
    Try rebooting your computer
    Try closing/opening iTunes.
    If you go through that and it doesn't work, try going into the control panel, add/remove programs. Uninstall iTunes, Apple Mobile Device Service, Apple Application Support. Then redownload and reinstall iTunes and try again

  • IPhone is no more visibile in My Computer after installing iTunes 8

    Hi all, after installing iTunes 8, iPhone isn't visible anymore in my Computer section in Windows. Previously, when I connected it, it was recognized as a photocamera and, from my Computer, i could access to it to see the photos that are stored on the iPhone.
    Now, instead, iPhone isn't displayed anymore: except for this, it works correctly; iTunes 8 recognizes it and synchronizes it.
    Notice: after the iTunes upgrade, when I've connected the iPhone for the first time, Windows says that he has found a new hardware and installed a new driver for an Apple Mobile Device USB.
    Has someone else experienced my problem? Thanks in advance!

    im having the exact opposite problem....my 3g is recognized inmy computer as a camera..but isnt recognized in itunes?
    i have no pics downloaded from emails (as i researched this before)
    the other night had same problem, had to restore phone, and re-install itunes..then no problem...but tonite trying to add new music and same thing again.
    disabled iphone under imaging devices, and its only listed under usb controllers...computer recognizes it every time
    there has to be a better way than restoring/reinstalling everytime?..has to be some little catch?
    HELP!
    FYI, i phone not being used as phone, being used as ipod, and only using wifi..has no sim installed.

  • After installing Itunes 10.6.3 When ever I start the computer I get a pop up the says  "Applesyncnotifier.exe- unable to locate component, this application has failed to start because Corefoundation.dll was not found"  How can I get rid of the pop up?

    After installing Itunes 10.6.3 When ever I start the computer I get a pop up the says  "Applesyncnotifier.exe- unable to locate component, this application has failed to start because Corefoundation.dll was not found"  How can I get rid of the pop up?

    I hope it doesn't effect how I down load my itunes to my ipod and iphone.
    No you should be fine. (The MobileMe service is being shut down, anyway, so there should be no impact at all.)

  • ITunes Error 7 (Windows error 127) after installing iTunes 64-bit for Windows

    After installing iTunes 64-bit for Windows (latest build), I get an error pop-up saying:
    iTunes was not installed correctly. Please reinstall iTunes
    Error 7 (Windows error 127)
    I've gone thru the uninstall, reboot and reinstall process three or four times now. Still nothing.
    Furthermore, after clicking okay to the error, it continues to pop up on it's own every 45 seconds or so.
    There was one other error I came across after trying to launch iTunes after installation.
    See both error messages here:
    http://screencast.com/t/DSg4PpKF5BeX

    Brilliant. Thanks a lot. I've wasted a couple of hours on this nasty bug, & trying all the other suggestions across various threads again and again.
    I now find I had the same registry entry hanging on, despite uninstalling & wiping everything again and again. Having now deleted this key, (I don't even have an iPod), & iTunes 11.1.14 now opens at long last.
    But WHY is this bug not fixed? Enough people are suffering with this across the forum. WHERE is Apple support on this?
    It should have been added to their page at 
    http://support.apple.com/kb/HT1923
    by now, why hasn't it???
    It's not good enough!
    Re:
    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\SharedDlls]
    "C:\\Program Files\\iPod\\bin\\iPodService.exe"=dword:80000000
    AHA! This entry for iPodService.exe still exhisted.  So I had no folders on the PC, no installs on the PC and no services running.... BUT this was still in the Registry.
    Step 5 - Delete only the Registry entry above.  NO REBOOT
    Step 6 - Reinstall iTunes64.exe

  • HT1923 my iphone4s is not connected to my computer after installing itunes...

    my iphone4s is not connected to my computer after installing itunes... if i uninstall itunes and connect my phone then computer is detecting my phone.... how to solve this plz help me....

    itunes is creating the problem... if i connect my iphone to itunes it is not detected.... after uninstalling itunes, iphone connects with computer.... u get me?

  • TS1277 after installing itunes, my computer won't recognize my cdrom/burner any longer.  Worked  ok before and I have uninstalled itunes and it works again and when I reinstall itunes it won't work again.  I have also went into registry files and deleted

    After installing itunes, my desktop computer doesn't recognize my internal cd rom/burner.  I removed itunes and it works ok and when I reinstall itunes it won't work again.  I went into the windows registry files and deleted the lower filter which is one correction for this and it worked ok until the next itunes upgrade and now it won't work again.  If anyone knows what to do please let me know.  My device manager shows a code "10"

    My device manager shows a code "10"
    That suggests an AFS.sys issue. But we'd better doublecheck.
    Could you post your diagnostics for us please?
    In iTunes, go "Help > Run Diagnostics". (If you're running iTunes 11.0.x you'll need to bring up your menu bar first to see the Help menu.) Uncheck the boxes other than DVD/CD tests, as per the following screenshot:
    ... and click "Next".
    When you get through to the final screen:
    ... click the "Copy to Clipboard" button and paste the diagnostics into a reply here. (Use your Ctrl-V keyboard shortcut to paste.)

  • Computer can't find DVD/CD-ROM drives after installing iTunes

    After installing iTunes, my computer no longer can detect my DVD-ROM and CD-RW drives. They've disappeared from the "My Computer" window.
    I ran "System Restore" and the disc drives showed up, but now they're undetected once again after I re-installed iTunes. I've restarted, I've uninstalled and then reinstalled iTunes, I've run the built-in diagnostic self-checks on the drives, I downloaded updated drivers, I uninstalled and reinstalled drivers, spent 1 hour on the phone with Apple support, and finally spent 2 hours on the phone with Dell Support. Nothing. Please help--I want to be able to use my iPod with Windows.
    Dell Dimension E510   Windows XP   Windos XP Media Center Edition 2005
    Dell Dimension E510   Windows XP  
    Dell Dimension E510   Windows XP  

    Hey there. May I interject? Anyone mind?
    For the most part, what's occurring is one of two things. Either...
    A) an application (such as Roxio, Nero, iTunes, etc.) is installing a driver file (as a .SYS) or replacing a working driver file that is referenced within your registry. For some folks, the replaced driver is still referenced by either an UpperFilterCheck or a LowerFilterCheck, and the device manager is actually seeking out that file that, well... no longer exists. Or, when you try and uninstall the application (iTunes is the frequent transgressor) everything is removed, including the related driver files, but the registry isn't altered... so the device manager continues to try and locate that driver file... which no longer exists.
    or
    B) a virus (or trojan) burrows its way into your file structure, and creates an element of itself disguised as a .SYS file. We've seen this happen before with viral elements disguising themselves as audio or video card driver files, in the efforts of masking themselves from lower-class anti-virus programs (or un-updated ones). In this case, they take on the name of a driver file that the optical drives are "familiar" with, and so, with the intention of being "fast, friendly, and efficient", the optical drives are tapped to utilize this new "driver" file... and it gets referenced in the registry as such.
    However, when your anti-virus actually snaps to it, and removes the virus / trojan, and you go off on a virus-killing mission, galavanting through the registry and cleaning the little buggers out in Safe Mode and everything... you might remove the viral elements... but... the reference to them might still remain. The device manager is still looking for that "driver file", and will cause the optical drives to lock up in a Code 39 or Code 41 because of it.
    Either way, the thing to do to reclaim your optical drives is located in your registry here:
    HKEYLOCALMACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE1 0318}
    You'll want to have that open, and a mini-window of the following:
    START -> CONTROL PANEL -> SYSTEM -> Hardware (tab) -> DEVICE MANAGER -> Offending Drive (with yellow tag by it) Right-Mouse-Click and PROPERTIES -> Driver (tab) -> DRIVER DETAILS
    Notice that list. It references all the drivers that that particular drive is utilizing. There should be a single .DLL (dynamic link library) file and multiple .SYS files. It's the .SYS files we're focusing on, and they should be located in your C:\WINDOWS\System32\drivers\ folder stem. If you want to open a new window explorer, and go verify that each of those driver files still exists in that folder stem, you may.
    At this point, compare the Driver File Detail list with the Registry Tree Location you're sitting in, and look at the UpperFilterCheck and LowerFilterCheck key values. Your offending key value will NOT be on your Driver File Detail list!!! It might be as small as "PFC" or something else, but that value is referencing to a driver file that no longer exists. Delete that offending key value. Close the registry.
    Close the Driver File Details and Drive Properties windows. At this point, to finish this up, you need to Soft Uninstall (Right-mouse-click on the drive, and hit "Uninstall" ) the drive(s), let the Device Manager refresh... then hit ACTION -> Scan For Hardware Changes ...
    This should start a new Found New Hardware cycle, and.... poof!... your drives should be back to normal
    I don't know if this will help, I think it should.
    Good Luck. Post back if you have a problem.
    Rachyl

  • 8.1 can't shut down after installing itunes

    I recently reformatted and did a clean install of window's 8.1
    I have done all updates, both windows and drivers and the machine is very smooth and stable.
    After installing iTunes the computer will no longer shut down, it displays the logging off / shutting down screen but then just reboots.
    I have attempted numerous resolutions to no avail, i.e. disabled NIC as bootable device, disabled the hybrid boot feature & flashed and tweaked some BIOS settings.
    The computer will not even shut down when I give the command "shutdown /s /t 0"
    I only had Windows Office and iTunes installed on the computer and suspecting that iTunes may be the culprit, I uninstalled it and now the computer shuts down without any issue.
    I have since read several threads about iTunes and shutdown/restart issues with 64 bit versions of Windows although I have not found anyone else with my exact issue.
    Is anyone aware of a resolution for this?
    For now I will need to install iTunes so I can sync my phone and then uninstall so I can shut down!

    Fingers crossed there will be an update for this, I was lucky that my install so was new that there weren't very many things that could have caused it because I don't think it would have ever occurred to me that iTunes was the issue.
    I literally tried every other possibility before waking up in the middle of the night and realizing that the problem started right after I installed iTunes.
    I have had issues with Apple software in the past where I attempt to disable it from launching automatically when I boot the computer and it will simply create another entry for itself in the startup list.
    If I disable that one it makes another, and another and another.... It's like the freaking Apple hydra.
    The want me to know how much I need them! lol

  • After installing itunes Windows 7 doesnt boot and stalls while loading atipcie.sys driver

    After installing itunes my computer stalls when loading atipcie.sys driver. Computer will not boot up in safe mode or Last known good. Only resolution was to perform System Restore to a time before itunes was installed, thus deleting the itunes installation
    Anyone know of a fix or workaround for this issue ?

    Windows 7 64 bit core i7
    BSOD while updating to iTunes 10 with suspended installation of Apple Mobile Device Support. Network drivers no longer working as a result. Attempted fix by downloading from a different machine and competing install via files transferred over on flash drive. No dice. Attempted removal of iTunes, QuickTime, Apple Mobile Device Support, Apple Application Support, Apple Software Update to see if this would fix. Followed this up with a restart. This seems to have improved matters as system is starting up faster. No dice. Try reinstall network drivers from Sony ViaoCare disk. Installed and restarted. No dice. Next, try Widows 7 Network and Sharing diagnostics. No dice. Next try manual removal & reinstall of network driver using Device Manager, restart. Can't seem to re-install Network Controller. Still trying to solve this.

  • How do I have itunes use/detect my external hard drive and place music on the external drive from the itunes store? There are no music files on my pc yet.  I will like to do this after installing itunes 11 on my pc for the first time. I am using windows 7

    How do I have itunes use/detect my external hard drive and place music on the external drive from the itunes store? There are no music files on my pc yet.  I will like to do this after installing itunes 11 on my pc for the first time. I am using windows 7.  HP computer intel Dual Core.  Thanks for any help!

    Hey idw3,
    Welcome to Apple Support Communities, and thanks for the question. Follow the instructions on this article to move your iTunes Media folder to an external hard drive:
    iTunes for Windows: Moving your iTunes Media folder
    http://support.apple.com/kb/HT1364
    Regards,
    David

  • HT2292 After installing iTunes 11.1.5, my external hard drive holding my iTunes music cannot be acccessed

    After installing iTunes 11.1.5, my external hard drive holding my iTunes music cannot be acccessed.  Attempting to open the iTunes folder location locks up the computer and requires a cold reboot to restore.

    Hello, LoudenFam. 
    Thank you for the question.  Try the steps in the article below as they may help you resolve the issue that you are experiencing with iTunes becoming unresponsive.
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/TS1717
    Cheers,
    Jason H.

  • After installing itunes 11.1.5, i get a message that says no apple support why?

    AFTER INSTALLING ITUNES 11.1.5, I THEN GET A MESSAGE THAT SAYS
    NO APPLE APPILACATION SUPPORT WHY ??????????????

    With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR suitable for your PC (there's a 32-bit Windows version and a 64-bit Windows version):
    http://www.rarlab.com/download.htm
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you? If so, see if iTunes will launch without the error now.
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • After installing itunes I get an error that says that I have to unistall and reinstall itunes because I'm missing something but it does not tell me what it is.

    After installing itunes on my pc i get an error that says that i have to uninstall and reinstall itunes.  I finally got it to down load and now it says that I need an upgrade.  It's getting very frustrating as I've never had this kind of trouble.

    What is the precise wording of the message that is appearing?
    What OS is on the computer?

Maybe you are looking for

  • How can I send a music gift to my friend again ?

    How can I regift my gift to my friend, unforunately He deleted my gift e-mail as a spam?

  • Why are my audiobooks not going through home sharing?

    why are my audiobooks not going through for home sharing.

  • Broken itunes card

    I have two itunes cards that I can't redeem because the barcodes came off when I ripped the stickers off. I am not sure what I do about this? Any help would be great.

  • CcBpm Loop Help

    Hi, Can someone help me with this? I did some searches on sdn but I can't seem to find some sort of step by step for how a loop works? I have multiple account numbers which I sent to a 1:1 web service which returns 1 account. I neet to loop through a

  • Setting MimeType for Unknown Attachment

    Hi, I have a file called FileDataSource (implements DataSource) which does the job of setting / Checking Mime Type (Sending / received) and also getting Input Stream / Output Stream for the same. Sending: When I call this class from out side I pass t