After installing itunes Windows 7 doesnt boot and stalls while loading atipcie.sys driver

After installing itunes my computer stalls when loading atipcie.sys driver. Computer will not boot up in safe mode or Last known good. Only resolution was to perform System Restore to a time before itunes was installed, thus deleting the itunes installation
Anyone know of a fix or workaround for this issue ?

Windows 7 64 bit core i7
BSOD while updating to iTunes 10 with suspended installation of Apple Mobile Device Support. Network drivers no longer working as a result. Attempted fix by downloading from a different machine and competing install via files transferred over on flash drive. No dice. Attempted removal of iTunes, QuickTime, Apple Mobile Device Support, Apple Application Support, Apple Software Update to see if this would fix. Followed this up with a restart. This seems to have improved matters as system is starting up faster. No dice. Try reinstall network drivers from Sony ViaoCare disk. Installed and restarted. No dice. Next, try Widows 7 Network and Sharing diagnostics. No dice. Next try manual removal & reinstall of network driver using Device Manager, restart. Can't seem to re-install Network Controller. Still trying to solve this.

Similar Messages

After installing lion, windows 7 boot option disappeared.

I had a macbook with snow leopard and windows 7 together. Yesterday I installed macosx lion. After installing it, windows 7 selection disappeared in boot menu. I tried to select boot options by pressing "alt key". I saw a new partition which is Recovery HD. There was no bac up files. So what happened to my windows 7 part? How can I restore system?
I tried to use disk utility in lion. I realized that the name of the windows 7 part was changed, now it is disk1s4 but before it was disk0s3 etc..
I removed my macbook HDD and attach with as external HDD to a desktop computer. But I could not find any solution.
In a forum, Someone suggest to create RAW diskimage by using a program named "active and undelete"
Firstly delete windows 7 partition on HDD and create new partition. And then set up it with windows 7 DVD and use RAW diskimage and restore your old settings.
is this logical?
Or is there any simple way to rescue my system? For example If I reinstall Snow Leopard, come my windows 7 partition back?

I could not remember this selection but if I choose one, I choose complete install..

After installing itunes windows services get turned off

I have a fresh install of Vista Ultimate Sp2 that has been running wiithout any probolems. I have waited a couple of weeks before installing iTunes. Now after 2 days the computer will not boot to windows. I boot too safe mode and I get a message that System Event Notification Service is turned off. In safe mode the services can't be accessed. So I do a system restore to the time I installed iTunes and all services are turned on and windows boots properly. I waited one week the downloaded iTunes again and reinstalled it. After a couple of days the computer will not boot except into safe mode. So I do a system restore and windows botts up ok. I then wait another week and I go thtough the same routine. I haven't installed anyother software yet, I want to get past this windows services getting turned off issue. I am not using selective startup so all services should start when the computer is turned on. Does anyone know what the issue may be?

A complete uninstall/reinstall of iTunes and related software components is worth a try (7s can indicate trouble with other software components like Apple Application Support). See the following documents for instructions:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
... But if no joy there, let's check to see if there's a .NET issue underlying this:
iTunes for Windows: "Error 7" message when opening iTunes

After installing iTunes on my PC and laptop, all my songs (including paid for) have disappeared from my previous music library. How do I get them back?

What happens to the old library? Do I have to install all my songs again?

For general library squiffiness following an upgrade the easiest thing is to restore your last backup, but I guess if it were that simple you wouldn't be here.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2

Laptop only runs in safe mode after installing itunes 10.5.2 and no solutions work in safe mode. I'm close to restoring computer to factory settings!!

I'm so frustrated!! None of the solutions work, I've uninstalled itunes, won't let me uninstall bonjour because "i dont have permission" and my laptop will only run in safe mode.
I'm thinking about restoring my laptop to factory setting even if it means losing everything!!

The Apple launch issues article suggests pulling 3rd-party plug-ins if the problem doesn't happen in Safe Mode.
Here's the article that will walk you through the process -> iTunes: Troubleshooting issues with third-party iTunes plug-ins

After an iTunes update failed to install iTunes won't open and I get lthe folloowing error messages. Program can't start because MSVCR80.dll is missing, and iTunes not installed correctly. please reinstall iTunes. Error 7( windows errpr 126)

After an iTunes update failed to install, iTunes won't open and I get the following two windows. Program can't start because MSVCR80.dll is missing from your computer, and iTunes not installed correctly. Please reinstall iTunes. Error 7 (windows error 126) When I reinstall I get the same messages and ITunes won't open.

Click here and follow the instructions.
(98815)

How do I have itunes use/detect my external hard drive and place music on the external drive from the itunes store? There are no music files on my pc yet. I will like to do this after installing itunes 11 on my pc for the first time. I am using windows 7

How do I have itunes use/detect my external hard drive and place music on the external drive from the itunes store? There are no music files on my pc yet. I will like to do this after installing itunes 11 on my pc for the first time. I am using windows 7. HP computer intel Dual Core. Thanks for any help!

Hey idw3,
Welcome to Apple Support Communities, and thanks for the question. Follow the instructions on this article to move your iTunes Media folder to an external hard drive:
iTunes for Windows: Moving your iTunes Media folder
http://support.apple.com/kb/HT1364
Regards,
David

After I install Itunes 10.5.2 and open itunes a window opens stating another program is not allowing itunes to burn cd's. Next, I get an error window stating itunes 42404 is missing. I've uninstalled itunes 3 times and re-installed. No luck.

After I install iTunes 10.5.2 and open iTunes a window opens stating "The registry settings used by the iTunes drivers for importing and CD's and DVD's are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes." This happens everytime.
After that on one occasion a window stated "Itunes msi) was missing. Upon uninstalling and reinstalling that disapeared. Now I get a window stating, (A required Itunes component is not installed. Please repair or reinstall Itunes.(_42404)"

To fix registry, refer to this article:
iTunes for Windows: "Registry settings" warning when opening iTunes
http://support.apple.com/kb/TS3299

After installing iTunes 12.1.2.27 on my Mac Pro 6-cores, my Mac freeze and boot again. Why?

After installing iTunes 12.1.2.27 on my Mac Pro 6-cores, my Mac freeze and boot again, and I cannot use iTunes. Can anybody help?
How can install an older version? (I use OS X 10.10.3)

I have the same problem. any help from any one please? thank you

I am using windows 7 starter,just downloaded itunes 10.5.2,while install getting prompt,cannot read ipodservice.exe,and after install itunes is not read iphone or ipod while plugging in through usb cable. Any ideas ,whats going wrong?

I am using windows 7 starter,just downloaded itunes 10.5.2,while install getting prompt,cannot read ipodservice.exe,and after install itunes is not reading iphone or ipod while plugging in through usb cable. Any ideas ,whats going wrong?

problem solved.
I phone 4s screen froozen

Windows 7 BSOD randomly occuring after installing iTunes 10.6 with iPhone 4 in dock

After installing iTunes 10.6 and IOS 5.1 on my iPhone 4, Windows 7 computer was randomly blue screening with the iPhone 4 in the attached dock. After removing the phone from the dock, system works fine.

Re-installed iTunes as you suggested and it worked. However, started experiencing random BSOD's. Disk check found a number of file errors on the boot drive - which it fixed. It then took a number of re-boots before computer became stable.
Then, upgraded iTunes on a HP workstation (no iPhone attached). On reboot windows had to attempt a boot repair 3 times before it would reboot. Couldn't even do a disk check without first reverting to the last restore point. It also corrupted Norton. The end result was 2.5 hours of wasted time.
Being an expert pc user, I can safely say that I believe Apple has some serious issues with 10.6.

Just installed iTunes 10.4.1 and it wouldn't work. Did a system restore. ITunes will not boot. Computer tells me I must reinstall iTunes. How do I do that?

Just installed iTunes 10.4.1 and it wouldn't work. Did a system restore. ITunes will not boot. Computer tells me I must reinstall iTunes. How do I do that?

Thanks, but since iTunes will not boot, I cannot run that iTunes diagnostic. Just need to know how to reinstall iTunes (Windows XP). Do I need to remove the existing non working version of iTunes, or can I just install iTunes from Apple like I was a new user?

ITunes Error 7 (Windows error 127) after installing iTunes 64-bit for Windows

After installing iTunes 64-bit for Windows (latest build), I get an error pop-up saying:
iTunes was not installed correctly. Please reinstall iTunes
Error 7 (Windows error 127)
I've gone thru the uninstall, reboot and reinstall process three or four times now. Still nothing.
Furthermore, after clicking okay to the error, it continues to pop up on it's own every 45 seconds or so.
There was one other error I came across after trying to launch iTunes after installation.
See both error messages here:
http://screencast.com/t/DSg4PpKF5BeX

Brilliant. Thanks a lot. I've wasted a couple of hours on this nasty bug, & trying all the other suggestions across various threads again and again.
I now find I had the same registry entry hanging on, despite uninstalling & wiping everything again and again. Having now deleted this key, (I don't even have an iPod), & iTunes 11.1.14 now opens at long last.
But WHY is this bug not fixed? Enough people are suffering with this across the forum. WHERE is Apple support on this?
It should have been added to their page at
http://support.apple.com/kb/HT1923
by now, why hasn't it???
It's not good enough!
Re:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\SharedDlls]
"C:\\Program Files\\iPod\\bin\\iPodService.exe"=dword:80000000
AHA! This entry for iPodService.exe still exhisted. So I had no folders on the PC, no installs on the PC and no services running.... BUT this was still in the Registry.
Step 5 - Delete only the Registry entry above. NO REBOOT
Step 6 - Reinstall iTunes64.exe

After installing itunes 10 installation was successful but then tells me error 2 (windows error 2), After installing itunes 10 installation was successful but then tells me error 2 (windows error 2)

After installing itunes 10 installation was successful but then tells me error 2 (windows error 2).

Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe, and select "Extract to iTunesSetup". WinRAR will expand the contents of the file into a folder called "iTunesSetup".
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, does iTunes launch properly now?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

After installing the windows 7 on the Macbook pro, i accidentally disabled the Macintosh hd and Recovery Hd and now now cant see them on start up

After installing the windows 7 on the Macbook pro, i accidentally disabled the Macintosh hd and Recovery Hd and now now cant see them on start up
I need to boot to macintosh but i cant see the drive nor to restore to the fastory settings through recovery HD, What can i do

hold down the option key during boot it give you the option of what parition you wish to boot into

After installing itunes Windows 7 doesnt boot and stalls while loading atipcie.sys driver

Similar Messages

Maybe you are looking for