After installing itunes windows services get turned off

I have a fresh install of Vista Ultimate Sp2 that has been running wiithout any probolems. I have waited a couple of weeks before installing iTunes. Now after 2 days the computer will not boot to windows. I boot too safe mode and I get a message that System Event Notification Service is turned off. In safe mode the services can't be accessed. So I do a system restore to the time I installed iTunes and all services are turned on and windows boots properly. I waited one week the downloaded iTunes again and reinstalled it. After a couple of days the computer will not boot except into safe mode. So I do a system restore and windows botts up ok. I then wait another week and I go thtough the same routine. I haven't installed anyother software yet, I want to get past this windows services getting turned off issue. I am not using selective startup so all services should start when the computer is turned on. Does anyone know what the issue may be?

A complete uninstall/reinstall of iTunes and related software components is worth a try (7s can indicate trouble with other software components like Apple Application Support). See the following documents for instructions:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
... But if no joy there, let's check to see if there's a .NET issue underlying this:
iTunes for Windows: "Error 7" message when opening iTunes

Similar Messages

  • After installing itunes Windows 7 doesnt boot and stalls while loading atipcie.sys driver

    After installing itunes my computer stalls when loading atipcie.sys driver. Computer will not boot up in safe mode or Last known good. Only resolution was to perform System Restore to a time before itunes was installed, thus deleting the itunes installation
    Anyone know of a fix or workaround for this issue ?

    Windows 7 64 bit core i7
    BSOD while updating to iTunes 10 with suspended installation of Apple Mobile Device Support. Network drivers no longer working as a result. Attempted fix by downloading from a different machine and competing install via files transferred over on flash drive. No dice. Attempted removal of iTunes, QuickTime, Apple Mobile Device Support, Apple Application Support, Apple Software Update to see if this would fix. Followed this up with a restart. This seems to have improved matters as system is starting up faster. No dice. Try reinstall network drivers from Sony ViaoCare disk. Installed and restarted. No dice. Next, try Widows 7 Network and Sharing diagnostics. No dice. Next try manual removal & reinstall of network driver using Device Manager, restart. Can't seem to re-install Network Controller. Still trying to solve this.

  • SINCE INSTALLING ITUNES 10.7 COMPUTER TURNS OFF FREQUENTLY

    Since I installed ITunes 10.7, my laptop, Windows 7 64bit keeps turning off every hour approximately without any error showing when it comes back.,  I need to finish an urgent project so today I rebooted and did not start ITunes and it has not turned off at all. Anyone else experiencing something similar? Thanks

    Did you try to copy the photos taken with the phone to your computer, delete them on the phone after that, delete the photo cache on the computer as well and try again to sync?
    More info here: iTunes: "Backup could not be saved on the computer" alert message
    Photo Sync creates iPod photo Cache

  • After install Mavericks I can't turn off my MacBook Pro from the power button.

    Dear all, prior to install Mavericks in my MacBook Pro, when I pushed the power button it appeared a dialog box which gave me the option to turn off the copmuter choosing the right option.
    After the installation of Mavericks,and obviuosly having the system running, when I push the power button it does just nothing.
    Does anyone have the same issue? Have someone solved it?
    Thank you very much in advance for your answers, for your attention and for your help.
    Kind regards.

    You can turn off this new sleep feature and restore the shutdown/sleep dialog box  to pop up when you press the power button.
    In Terminal copy & paste in the following command and then press enter:
    defaults write com.apple.loginwindow PowerButtonSleepsSystem -bool no

  • Ipod touch for Christmas, but cannot get started: after installing itunes, when connecting to my laptop I get no instruactions, just the error message "This iPod cannot be used because the Aplle Mobile Device service is not started". Any suggestions???

    ipod touch for Christmas, but cannot get started: after installing itunes, when connecting to my laptop I get no instruactions, just the error message "This iPod cannot be used because the Aplle Mobile Device service is not started". Any suggestions???

    Jennifer...
    Follow the instructions here >  iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

  • HT1923 how do you get the dvd drive back after installing itunes to windows 7

    How do you get the dvd drive back after installing itunes to windows 7??

    Safari/Preferences/General and set a new default.

  • I am using windows 7 starter,just downloaded itunes 10.5.2,while install getting prompt,cannot read ipodservice.exe,and after install itunes is not read iphone or ipod while plugging in through usb cable. Any ideas ,whats going wrong?

    I am using windows 7 starter,just downloaded itunes 10.5.2,while install getting prompt,cannot read ipodservice.exe,and after install itunes is not reading iphone or ipod while plugging in through usb cable. Any ideas ,whats going wrong?

    problem solved.
    I phone 4s screen froozen

  • ITunes Error 7 (Windows error 127) after installing iTunes 64-bit for Windows

    After installing iTunes 64-bit for Windows (latest build), I get an error pop-up saying:
    iTunes was not installed correctly. Please reinstall iTunes
    Error 7 (Windows error 127)
    I've gone thru the uninstall, reboot and reinstall process three or four times now. Still nothing.
    Furthermore, after clicking okay to the error, it continues to pop up on it's own every 45 seconds or so.
    There was one other error I came across after trying to launch iTunes after installation.
    See both error messages here:
    http://screencast.com/t/DSg4PpKF5BeX

    Brilliant. Thanks a lot. I've wasted a couple of hours on this nasty bug, & trying all the other suggestions across various threads again and again.
    I now find I had the same registry entry hanging on, despite uninstalling & wiping everything again and again. Having now deleted this key, (I don't even have an iPod), & iTunes 11.1.14 now opens at long last.
    But WHY is this bug not fixed? Enough people are suffering with this across the forum. WHERE is Apple support on this?
    It should have been added to their page at 
    http://support.apple.com/kb/HT1923
    by now, why hasn't it???
    It's not good enough!
    Re:
    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\SharedDlls]
    "C:\\Program Files\\iPod\\bin\\iPodService.exe"=dword:80000000
    AHA! This entry for iPodService.exe still exhisted.  So I had no folders on the PC, no installs on the PC and no services running.... BUT this was still in the Registry.
    Step 5 - Delete only the Registry entry above.  NO REBOOT
    Step 6 - Reinstall iTunes64.exe

  • I cannot install iTunes.  I get a Windows Error 126 and missing msvcr80.dll.  I've tried uninstalling and re-installing based on all the suggestions, but still have an issue

    I cannot install iTunes.  I get a Windows Error 126 and missing msvcr80.dll.  I've tried uninstalling and re-installing based on all the suggestions, but still have an issue.  I've removed all the services, tried moving the dll files as suggested, but I still have no success.  Spent all day on this issue.  I am running windows 7.

    Sorry to hear this isn't going smoothly for you. Try  Troubleshooting issues with iTunes for Windows updates. You may have seen some of the suggestions here before but is has taken some users more than one attempt.
    tt2

  • HT1926 When trying to install iTunes, I'm getting the following error "Apple Mobile Device failed to start.  Verify that you have sufficient privileges to start system services".  How do I fix this?

    When trying to install iTunes, I'm getting the following error "Apple Mobile Device failed to start.  Verify that you have sufficient privileges to start system services".  How do I fix this?

    SAME EXACT PROBLEM! SO FRUSTRATED AND ****** OFF!

  • After installing itunes 11.1.5, i get a message that says no apple support why?

    AFTER INSTALLING ITUNES 11.1.5, I THEN GET A MESSAGE THAT SAYS
    NO APPLE APPILACATION SUPPORT WHY ??????????????

    With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR suitable for your PC (there's a 32-bit Windows version and a 64-bit Windows version):
    http://www.rarlab.com/download.htm
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you? If so, see if iTunes will launch without the error now.
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • I am trying to install itunes.  I get a message Service Apple mobile device failed to start

    I am trying to install itunes.  I get a message Service Apple mobile device failed to start. I am unable to finish the installation.

    Hello M Roddy,
    The following article provides steps that can help get iTunes updated and working.
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Cheers,
    Allen

  • After installing Itunes 10.6.3 When ever I start the computer I get a pop up the says  "Applesyncnotifier.exe- unable to locate component, this application has failed to start because Corefoundation.dll was not found"  How can I get rid of the pop up?

    After installing Itunes 10.6.3 When ever I start the computer I get a pop up the says  "Applesyncnotifier.exe- unable to locate component, this application has failed to start because Corefoundation.dll was not found"  How can I get rid of the pop up?

    I hope it doesn't effect how I down load my itunes to my ipod and iphone.
    No you should be fine. (The MobileMe service is being shut down, anyway, so there should be no impact at all.)

  • After installing itunes 10 installation was successful but then tells me error 2 (windows error 2), After installing itunes 10 installation was successful but then tells me error 2 (windows error 2)

    After installing itunes 10 installation was successful but then tells me error 2 (windows error 2).

    Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe, and select "Extract to iTunesSetup". WinRAR will expand the contents of the file into a folder called "iTunesSetup".
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you? If so, does iTunes launch properly now?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • Windows error after installing  itunes 8.0.2.20.

    I' ve a problem after installing Itunes 8.0.2.20.
    When i try to use Itunes i get the message windows with a log and use of itunes is broken.

    Might have been a bad cable. I reinstalled. Got a crash again. Tried a different cable. It worked.

Maybe you are looking for

  • Size of combobox in JTable with custom cell editor

    Hi All - I have a JTable that displays a combobox in certain cells. I have a custom table model, renderer, and editor. All of that works fine. I render the combobox with the renderer, and then return the combobox as an editor in the editor so that it

  • P&L - Result of period shown in equity

    Hello By default SAP transfer the result of the period in Balance sheet+P/L account statement in 'next' period. In other words to check the balance of debet/credit you have to summarize assets, liabilities and p/l. Is it in any way possible to see th

  • Can't get CP7 to refresh SumTotal LMS on exit or update status

    Does anyone have the same experience in CP7 not being able to refresh SumTotal LMS on exit or update the course status? Any help would be greatly appreciated. Thanks in advance

  • 'error 2001' What does that mean?

    I get the message 'error 2001' when updating Acrobat. Using MacBook Pro with IOS Mavericks. What does that mean? / Sawant P

  • ILife install failed

    I tried doing a standard install of iLife 09, but the Installer app crashed in the middle of the install. Now when I try to run the install again, I get the following message: Install Failed - The following install step failed: run preflight script f