After installing iWeb 08 (vers 2.0.1) - Blog comments missing

Originally my web site was created and maintained by iWeb '06 and resides on my .Mac web space. It contained several blog entries and associated comments (as it's a site I set up to commemorate the death of my partner's son). I've just updated to iWeb 08 and when using it for the first time it asked that the site is updated to work with the new version - which I did. I then published the site (though I'd made no changes). Unfortunately, though the blog entries are still there, all the comments we had received from the site visitors have gone missing.
I don't want to try an re-publish the site until I know whether I've lost forever all the comments. Unfortunately, I've not made a back up for the site for many months (my stupid mistake). Is there anyway of getting these comments back.
Any help will be very gratefully received.
Paul

Just updated with iWeb 08 and have the exact same problem. It's a shame when you spend so much time putting together a site and you lose something as valuable as blog comments. I now have dual websites. One updated and the other with comments I want to keep but can't update. Now I have to make everyone know there was also a change in the web address. Bummer. Major disappointment.

Similar Messages

  • Audio sounds horrible after installing iTunes vers 10.5. How do I restore the audio quality?

    How do I restore audio quality after installing iTunes version 10.5? The audio is high-pitched and metallic.

    I wish i knew, no feedback or help forthcoming from apple yet

  • IE8 Freezes on Startup after installing SMP Ver 4.51

    Dell Vista Home Premium: had to uninstall SWP to restore IE8 functionality.
    Works fine on HP Vista Home Premium. 
    Any ideas how to get it to work on Dell machine.  (I suspect it is not Dell related.)
    This question was solved.
    View Solution.

    Solved!   Run IE8 as Administrator and SWP runs without hanging up IE8.   You can do this routinely by right clicking IE8 shortcut->select Short Cut Tab->Select Advance button->select "Rin as administrator."
    Don't understand why this is necessary, but it works.

  • After installing Elements 11 the Quick Start tab is missing?

    i installed and paid for elements 11 but now i cannot access the program. the quick start tab is missing. I cant start the program but i still have the files?

    mrspecialk
    I think that the answer will end up being a complete uninstall reinstall of Premiere Elements 11 to default computer location if you have installation files or installation disc. But, please read the following first.
    Thanks for the additional information. The following is going to be based on the information supplied, that is,
    Premiere Elements 11 is definitely installed on your computer as evidenced by its presence in Control Panel/Installed Programs List
    Windows 7 32 bit computer
    You say that you cannot find a desktop icon for Premiere Elements 11 after installation.
    I will ask again just so that I do not take anything for granted...if you click on Start, All Programs, do you see "Adobe Premiere Elements 11" listed anywhere?
    You say that you cannot find the following two files on your computer. It appears that you are using the search function of the computer to look for
    Adobe Premiere Elements 11.exe
    and
    Adobe Premiere Elements.exe
    Instead of the Search for find those files, can you take the longer route and follow the path to them folder to folder. I have Premiere Elements 11 on Windows 7 64 bit, not 32 bit, but I believe this will be the path to follow folder by folder clicking
    Computer
    Local Disk (C:)
    Program Files Folder
    Adobe Folder
    Premiere Elements 11 Folder
    and, inside the Premiere Elements 11 Folder should be the two .exe files that you seek. Scroll down line list of folders and files there to find it.
    Do you find the two .exe files there?
    If not, then I would suggest that you go to the Control Panel and uninstall Premiere Elements 11.
    Then reinstall Premiere Elements 11, making sure that you let it install to the default location of the program.
    Then look for the desktop icon and those two .exe files again to confirm that the program has installed correctly.
    Please let us know the results.
    Thank you.
    ATR

  • No option to simulate cRIO device after installing Labview and RT/FPGA Modules from downloads (missing driver support?)

    Hi guys--
    Basically, I need to simulate a cRIO device without yet having the hardware on hand, like this:
    How to Simulate FPGA Hardware Targets Using the Project Explorer with LabVIEW
    Instead, I only get the options shown in the attachment "Add Target Options.jpg".  I assume this is because of missing drivers, which I assume is due some mistake I made during a recent fresh install of LV.  The install went like this:  I downloaded (not disks) and installed the following (in this order, latest versions all around):
    (1) LabView Development System
    (2) Real-Time Module
    (3) FPGA Module
    (4) NI-RIO (install prompted by previous install)
    (5) DAQmx
    At the end of (1) and (2), I got the screen shown in the second attachment ("Drivers Install Message.jpg"), but could not get it to recognize the "NI Device Drivers" folder (which I also downloaded), or any of its sub-folders.
    I feel I'm missing some obvious option for loading up the necessary drivers after the install, but can't seem to find reference to it in the forums.  Could anyone give me a little push in the right direction?
    Thanks a bunch, and have a great day.
    Solved!
    Go to Solution.
    Attachments:
    Add Target Options.jpg ‏57 KB
    Drivers Install Message.jpg ‏47 KB

    Michael--
    Thanks for your reply.  In answer to your questions, the DAQmx install seemed to go smoothly, and I believe this is evidenced by available my MAX Simulated Device options (shown in the attachment to this post).  My best guess (could be wrong here) is that I cannot simulate a cRIO device because I was unable to install the drivers after the Real-Time Module installation (as described in my first post).
    The source path selection screen for drivers ("Drivers Install Message" attachment in first post) told me "...you can install NI device drivers later.", and since it would not recognize anything in the NI Device Drivers folder I downloaded, I clicked on "Later".
    I could narrow the issue down a bit if I could now install those drivers, but this is my first time installing without disks, and I can't figure out how to properly install the drivers from the folder I have sitting on my hard drive.  Have I overlooked instructions somewhere on this procedure?
    Thanks a bunch for your help.
    Attachments:
    MAX Device Simulation Options.jpg ‏52 KB

  • After instaling ver 3.6 I can't load facebook games. And I can't un-install

    After installing new ver of firefox 6.1 I think, firefox will not load facebook games. It says that the adobe flash crashed. I looked for an update to no avail. How can I either fix this or revert back to the previous ver?
    == URL of affected sites ==
    http://www.facebook.com

    Hello Alsohim.
    You may be having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
    Whenever you have a problem with Firefox, whatever it is, you should make sure it's not coming from one of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] and select ''Disable all add-ons''. If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme. You can troubleshoot plugins the same way.
    If you want support for one of your add-ons, you'll need to contact its author.

  • How setup LDAP Sync After Install in OIM 11g  ver, 11.1.1.5.0

    Hi guys, I'm trying to find how to setup LDAP Sync After Install in OIM 11g (ver, 11.1.1.5)....
    I found on Metalink an interesting article "*How to Setup LDAP Sync After Install in OIM 11g [ID 1272682.1]*", but inside there is a Note that says:
    Note: This article is applicable to OIM version 11.1.1.3 only. Steps for 11.1.1.5 are not the same, and product manual has documented steps to setup LDAP sync after install.
    So, that the steps for 11.1.1.5 are not the same, it's clear.....
    and I tried to look for these steps in the manual:
    Oracle® Fusion Middleware Quick Installation Guide for Oracle Identity Management
    11g Release 1 (11.1.1)
    Part Number E10033-06
    but I didn't still find nothing for the specific 11.1.1.5.0 version....only for the 11.1.1.3.0 version
    Can anyone help me to find where these steps are ? I need this information as soon as possible ti start the development
    Thanks in advance for the help
    Alex

    If you are creating Before and After Create Opeation script, you would be able to access all the variables in the process form. Now obvious question, what are the names of these variables? The answer is: the name of the variable is same as that mentioned in the "decode" column of the provisioning attribute map lookup or in other words, the variable name is same as the AD attribute name. In the example mentioned in the documentation, the variable "%givenName% was used in the script. On the similar lines you can use other variables like "sn", "samAccountName", etc.
    Hope the information helps.

  • IWeb not showing iPhoto library after installing Lion

    Hi, can anyone help with this issue ?
    Since I have installed Lion, the iPhoto library that showed up on the right hand side of iWeb is not showing up.
    Has anyone else also faced this issue after installing Lion ? Is there a solution ?

    Thanks for your reply, but the Media is turned ON, I can see the iTunes content but no pictures from iPhoto.
    It keeps on showing, "Loading photos".

  • Photoshop upgrade, do i need to unistall ver 9 or should i, after installing ver 12.

    photoshop upgrade, do i need to uninstall ver 9 or should i? after installing ver 12.

    No, if asked for qualifying product use PSE 9 s/n

  • Epson 4880 stopped printing after installing ver. 9.17

    Epson 4880 stopped working after installing ver. 9.17 driver.

    I can't help thinking you may need to reinstall Mavericks. Most people (>99%) aren't having these issues! If you count the number of problem posts, then divide by millions, you'll see what I mean.
    I'm fairly certain the Gutenprint drivers support your 560 (can't know for sure because you didn't give the whole model name).
    http://gimp-print.sourceforge.net/MacOSX.php
    (feature support in Gutenprint drivers is "different." Some people really like it - others not so much)
    For the Epson, (which I have 3 of) it is not possible to pinpoint what the issue is (printer or Mac), until you get it printing.
    Part of what Resetting the Printing System does is restart the CUPS daemon, which re-creates the index of where to find each driver. So try Resetting the Printing System:
    OS X Mavericks: Reset the printing system

  • Calendar problem can't open appointment  after installing ver 5

    After installing ver 5 the calendar opens without the ability to open new appointments .
    What can I do?
    Adi

    somebody?
    Help?
    adi

  • Lost desktop info after installing Ver 6.2, sych would not update PC

    The Win7 64 drivers are a good thing,  syncs fine!  THX!
    After installing Desktop 6.2 all my desktop data gets gone except the media files.  I had no way of importing backup files so I had to revert back to using Ver 4.2.  Is there some trick to using the latest SW?  The TX is using HotSync Ver 5.4.8P.  Appreciate any help.  Thanks
    Post relates to: Palm TX

    This data loss issue has been reported to the developer of PD 6.2. Palm/HP, is/are not the owners of the software. The known causes are leaving Palm Desktop open when a Windows update occurs or leaving PD open when shutting down the PC.
    There is no way to prevent the loss other than exporting your data on a per data change basis. The best option is to revert back to a previous version of PD as you have done.
    The best way to preserve your data is to export the data in each category in Palm Desktop to a separate folder on your PC.
    Create a new folder on your PC somewhere that is convenient. Name it something like Palm Desktop Data. Click on the link below and follow the instructions on that page for the export procedure.
    http://kb.hpwebos.com/wps/portal/kb2/common/article/28734_en.html
    Make sure you select all for the range in the export window.
    With the data saved in the folder you created, make a copy of that folder and save to a flash drive, cd-rw or external hard drive.
    Anytime you make a change in Palm Desktop, export the data that was changed to that folder and save again to the external media.
    With this process you can always import the data back into Palm Desktop anytime you have a problem with the data in Palm Desktop or if your computer/hard drive/device crashes.
    For reference purposes, click on the following link for the support page for your device on the kb.hpwebos.com webpage.
    http://kb.hpwebos.com/wps/portal/kb/na/tungsten/tx/unlocked/home/page_en.html
    There are links on the page to the user guide, troubleshooting, how to's, downloads, etc.

  • Can't use parallels desktop ver.7 after installed OS X Mountain Lion

    Dear All
    Everyone has solution to fix this issue ? I can't use the parallets desktop ver.7 after installed os x mountain lion.
    Please advice.
    Thanks & regards

    Hi,
    Make sure you have the most current build of Parallels 7 - it works well fro me, and the other poster, so unless you have some lind of issue internally, it should work for you.
    Try doing a repair permissions from Disk Utility. I needed to do that to get Quicken Essentials to work.
    Cheers,
    M.

  • IWeb doesn't sit in the dock after installing Mountain Lion? Why is that?

    iWeb doesn't sit in the dock after installing Mountain Lion? Why is that?

    Assuming you updated the OS on a Mac that has iWeb installed you will find iWeb in the applications folder. See this page for how to open your website when using Mountain Lion...
    http://www.iwebformusicians.com/iWeb/mountain-lion.html

  • After install iLife '11, iWeb does not show the picture

    After install iLife '11 , I need to edit some pages of an existing website (stored on my HD)
    When I open the page I would edit (it's a page that contains some photo gallery) I see that the picture gallery is empty and if I try to publish the page when I browse it I see the page appear but there's no picture gallery on it.
    there's any solution ?
    gabriele

    Try the following:
    1 - Go to your user account home folder, and open the library folder within it.
    Look for the folder named "Calendars" and inside you might find a bunch of different folders with weird names. If they are there that means your calendars might not be lost.
    2 - Look for the file "Calendar Cache". That file might be corrupted. Trash it. You may want to save a copy of it elsewhere. Once trashed, re-open ical. This should force it to rebuild its library based on those folders with weird names you saw. Your calendars should be back. Good luck

Maybe you are looking for