After installing latest update Macbook won't start up.
After installing the latest update my macbook won't start up. Instead of the login screen I get a flashing map icon with a question mark. My uncle says that means it can't find the startup disk and I had to startup from the install disk holding C but it didn't work. I'm quite desperate because I need my macbook for school (writing & producing music). I type this on a friend's computer... How can I fix this? Or do I really have to go to a mac store and part from my macbook for an unknown time...? :'(
I don't exactly know what version I have (can't check it now either) but it's at least 10.6.something and I always install the updates...
Hi
Anything unusual happen during the 10.5.3 update installation phase?
What type of iMac are you using? Your tag says G5 but also Intel core processors - it can't be both.
Try this:
-First unplug your computer and wait 10 minutes
-Next, simultaneously reinsert the power cord while pressing the power button for 5 seconds then release
-Press the power button again to start the computer - this resets the computer's system management unit (SMU) which controls your machines power functions.
-Next, press/hold down the P/R/option/command keys for 3 Apple chimes. This clears the machine's PRAM. After the 3rd chime release those keys and immediately hold down the Shift key to put the machine into Safe User Mode
-If you get to a log-in screen (may take several minutes as repair functions are occurring on the boot), log-in. When the login is complete, restart the computer as usual.
If no go, I suggest taking the machine to a certified Apple tech, or if you live near an Apple store to the Genius Bar.
Post back
Message was edited by: Hawaiian_Starman
Similar Messages
-
After installing latest update, iMac won't complete startup
It gets to the gray screen with the apple logo and spinning disk, and stays there. It won't let me boot from the install disk, so I can't try a reinstall. I thought I might be able to load Disk Utility via Unix (which I can get to) and repair the permissions, but that doesn't seem to work either (though I don't know Unix well so that could be my fault).
Hi
Anything unusual happen during the 10.5.3 update installation phase?
What type of iMac are you using? Your tag says G5 but also Intel core processors - it can't be both.
Try this:
-First unplug your computer and wait 10 minutes
-Next, simultaneously reinsert the power cord while pressing the power button for 5 seconds then release
-Press the power button again to start the computer - this resets the computer's system management unit (SMU) which controls your machines power functions.
-Next, press/hold down the P/R/option/command keys for 3 Apple chimes. This clears the machine's PRAM. After the 3rd chime release those keys and immediately hold down the Shift key to put the machine into Safe User Mode
-If you get to a log-in screen (may take several minutes as repair functions are occurring on the boot), log-in. When the login is complete, restart the computer as usual.
If no go, I suggest taking the machine to a certified Apple tech, or if you live near an Apple store to the Genius Bar.
Post back
Message was edited by: Hawaiian_Starman -
After installing latest update the contact photos don't show on incoming call
After installing latest update the contact photos don't show on incoming call
Possible iTunes issue:
Try the following after adding photos.
Go to file
Then Home Sharing
Select photos to share
Click on All Photos already selected Do anyway
When Apply turns black click on Apply
Now go to Apple TV to see if photos there
Or restart iTunes.
Works for me every time photos do not appear on my Apple TV 3
Hopefully will work for you. -
HT201412 None of my apps works after installing latest update.
After installing latest update on my iPad 2, none of my apps work. I click on the app, it flicks and goes back to home screen. Powering iPad off and restarting it did not work. Please help.
Did you update the apps? Check app store. Most of them had updates to support the iOS 5.1.1. It's been out a while
-
Error message after installing latest update
Since installing latest update 11.0.2.26, I am receiving error message: An unknown error occurred (-42110)
Itunes does work, however, when I close this message down.
Can anything be done? What does it mean? Am I better off just holding out until the next update and hope it fixes itself?Removing the SC Info folder as per the "Error 3001," "-42110," or "5103" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document seems to help most folks reporting the iTunes launch 42110s:
iTunes: Advanced iTunes Store troubleshooting -
Saving Issues after installing latest update
Today, after installing an update to my Acrobat XI Standard, I am getting an error message when trying to save .pdfs from an email to my server. The error message is: The document could not be saved. There was a problem reading this document (21). Any way to fix this?
Hi JasBell,
Which server are you trying to save to?
What happens if you copy the document to the local computer first and then copy to the server?
Regards,
Rave -
Cannot connect to iCloud server on iPad after installing latest update
I cannot access iCloud through iPad since installing latest update. Keep getting Accept the new terms etc" but can't do so through the setting s page
When I go to the settings page to access iCloud and click on terms and conditions it gives the message
-
G4 will not boot up after installing latest update
Just installed latest OS 10 update (10.4.8 or 9?) Mac will not boot up. The ring sounds on start up and the apple shows on video but it never gets to the rotating circle. It has been over an hour. I have restarted twice to no avail. I have also disconnect all peripheral. Do you have any suggestions as to what to do next?
Hi-
Welcome to Discussions!
Try a boot in safe mode (startup holding"shift" key after chime). This will help determine if you have conflicting drivers, fonts,etc. present, and helps bypass damaged software components:
http://docs.info.apple.com/article.html?artnum=107393
If successful, run Disk Utility. If not, try a single user boot, and run fsck:
http://docs.info.apple.com/article.html?artnum=106214
Alternatively, boot from your OS install disk, and run Disk Utility.
Post back with your results, please!
G4 AGP(450)Sawtooth Mac OS X (10.4.8) 2ghzPPC,1.62gbSDRAM, ATI9800, DVR-109,(IntHD)120&160,LaCie160,23"Cinema Display -
T60 WLAN COMPLETELY GONE after installing latest Update Intel Wireless WiFi Link for Windows XP
I just reinstalled a T60 from scratch TWICE to the point of updating - Intel Wireless Wifi Link for Windows XP -
Just after that very latest Update (3.1.1.1 or so?) there is no WLAN possible and I had to find out, that a system restore is impossible either! (Simply does not work and asks me to get another point and try again)
I have a full backup done by acronis 2010 so that does not bother me so very much.
The point is that I like to WARN everybody to install that Update to their T60 e.g. 2008YWJ !!!
(contains 3945AGB WLAN Module!)
After Updating U HAVE NO CHANCE TO REPAIR IT! U get always the problem signature
szAppName: AcSvc.exe szAppVer: 5.6.1.33 szModName: PfMgrApi.dll
szModVer : 13.0.0.2 offset: 000d4912
and the System wants to report that stuff to MicroSoft...again and again...every time u
start AccessConnections.
U can DEinstall AccessConnections and Intel Wireless Wifi Link for XP completely, reboot
and REinstall it....just 2 get the same messages and NO WLAN anymore.
I could not get out of this Driver Installation Hell until I did a complete Recovery Install and
I got back to Hell when System Update REinstalled Intel Wireless WiFi Link for XP
automagically...;-(((
And again NO CHANCE to roll back, No chance to get rid of that annoying bug. This time I have an ACRONIS-Image so I can spare some time....
Somebody shoud really CHECK this, because it should not be possible to break down an completely NICE RUNNING Thinkpad THIS WAY just by updating it! As it took me abaout 12 Hours of Administration by now I
really would apreciate to help whomever to find out what the hell is responsible 4 this !!!
Why is XP System Restore not working on an T60 to roll back to Point b4 installation of this Update???
(I could not use that Thinkvantage-System Recovery because it did not even get all its updates by the
time the system went in limbo during install! What i defintely can say is that it breaks at exactely
same point when Intel Wifi Updates is installed...
I do my Acronis Restore now and try 2 avoid this Update....;-(
if anybody KNOWS how to get that system 2 an earlier point of an install orgy i whould be thankful to get that information...
I am keeping alive 12 Thinkpads here R40 R50 T42 T43 T60 T61p T400 T500 and NEVER
experienced problems like this in many years!
cheers
GAL9000gal9000, welcome to the forum,
have you tried running windows system restore from safe mode? It usually works then because some anti-virus softwares will prevent it from running successfully from "normal" windows.
Hope this helps.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog -
After installing the latest update to Firefox onto Vista operating system the record part of real player no longer works, I think Mozila and Real are using a library file with the same name and the Mozila update is overwriting a Realplayer library file.
I was giong to say, "Help me, Adobe Joe Kenobi", but it looks like you're growing a beard waiting for an answer, too.
The same thing happened to me today. I trusted the "update" message since it was from Adobe, and apprently did so at my own peril. Now I get the "failed to load Core dll" message with a secondary reference to a memory address.
Just an observation, but what good are these forums when there are no answers? I see this problem as "Caused by Adobe Update", and would expect them to troublshoot and offer up a remedy. Since you've been waiting over two months with no response, I suppose it's time to trek off wasting more of my precious time to fix their problem. If I find the solution, I'll post it back to you.
May the Force be with you.
Mark -
After installing latest update cannot access "messenger options" under the options tab
After installing Firefox latest update I cannot access "messenger options" under the options tab. The other tabs, themes and mail options work when clicked but nothing happens when I click "messenger options" It works fine in IE.
When I go to the settings page to access iCloud and click on terms and conditions it gives the message
-
HP Power Advisor has stopped working after installing latest updates
I have been using HP Power Advisor successfully on my Lenovo X230 running Windows 7. After installing the latest Power Advisor updates it no longer works. I can select a voltage from the dropdown on the Input Voltage screen but nothing happens when I click on the Go button, as if it is disabled. I've tried re-installing the download package which works fine but it stops working again as soon as I install the latest updates. Any ideas how to solve this?
Well on the website for HP power Advisor, it specifically says,
"Accurately estimate power consumption of your HP server and storage products"
There could be many different things interrupting your use of the program, but I'm going to say that maybe your largest problem with using the HP software designed for HP machines is your Lenovo.
Sorry,
Good Luck!
Did I help you? Please give me a Thumbs up to help let others know! -
Why did my iPad go into recovery mode after installing latest update?
I installed the latest update for the operating system and when my ipad 3 restarted, I get a unresponsive screen with a iTunes logo in the middle and a picture of the charging cord on the screen. It does not let me do anything with it. Any ideas?
Why it happened nobody can know for sure. Did the download stall? Do you run antivirus software that can interfere with the download? Did your internet connection cut out?
There could be any number of reasons why it happened. Were you able to restore the iPad and get it up and running again? -
Why will iTunes not start after installing latest updates on a windows computer?
I got the usual notification that an update for iTunes on a windows 7 computer was available and told it to install
It went through the motions and seemed to install,. but when I tried to open iTunes on completion I got the message below.
I subsequently removed iTunes and reinstalled after manually removing various iTunes folders, then reinstalled iTunes with the same result of the error message so I removed iTunes again and installed an older version of iTunes which worked fine until yesterday I was notified of an update for the iCloud, which I installed and am back at square one with the same error message.
I have tried to send an e-mail to Apple but they make it virtually impossible, so I would appreciate any advice anyone can give. I cannot be bothered with all this mucking avbout every time there is an upgrade
Thanks, MactoshbHi, I carried out the advice and after reloading, Itunes is starting OK but I could not delete most of the files and folders mentione,d constantly getting the message that they were open in some unspecified program and to close it to continue, problem was I had no idea what the program was that they were open in.
However I have Ashampoo uninstaller installed and it identified various programs associated with Apple and after uninstalling them I reinstalled iTunes and it is working fine now.
Question, am I going to get this cobblers every time Apple offer an upgrade?????
Anyway thanks for your help and hopefully this posting will help others, as I doubt I am unique and others will have the same problem, Time perhaps Apple sorted it out
Boyd -
After installing software updates, PB won't boot up completlely HELP!
I posted earlier about my problem but on the wrong forum. I'm new to this forum and I'm a new mac owner in desperate need of your help!!
Yesterday a few software updates needed to be installed so I did, they were minor- iTunes, iTunes Phone Driver, Microsoft Office, and a security update. I installed all the software with no problems until it wanted to restart. I let it do its thing, but after 10 or 15 minutes it would not boot up so I held down the power button and shut it off. It wasn't making any peculiar sounds except that after 10 minutes the crunching noise that the hard drive makes became sort of sporadic and lost consistency.
Since then I have rest the PRAM, ran disk utility off my OS X installation disk and repaired the disk and permissions all with no progress. The repairs came back "appears to be ok." I also ran the hardware test and the results, once again, came back "ok."
I've been reading through forums for the past day or so and haven't found anything quite like my situation. If someone could talk me through some other options to fix this, I would really appreciate it. I'm stumped and in a bit of a pickle. I really need my PB for school and am over 4 hours away from the nearest mac store.
Whoever reads this will cringe when I say I haven't backed anything up... I'm not worried about losing music or pictures or other documents but I am concerned about losing my apps- I'm an art major and I really need all my photoshop, illustrator, flash, etc... I don't have the original disks for those programs since the computer belonged to my mom who is a graphic designer and got those programs through her work.
PLEASE PLEASE PLEASE help me. You're a saint if you can offer any helpful advice.
Thanks so much,
Scurvie :0)Hi s,
Was the PB working without any issues before this?
Exactly what happens when you try to boot normally?
I'm wondering if you did a hard shutdown (last resort) in the middle of your PB installing/arranging tens of thousands of files, so now there is software and potentially firmware corruption (something like a brain surgeon sewing your head up only halfway through the operation).
Have you tried booting into Safe Mode?
If you get the PB booted again, repair permissions (not from the install disc).
Run Software Update, but never let it install more than one update at a time, and repair permissions before and after each update. If you want to be safer yet, go to Apple Downloads and download the update from there, then install it. Enough people have reported issues using SU that I never install from there. Also, if you're really running 10.4.1, that should be your first order of business; you should update to 10.4.11.
If you have another Mac available to you, see if yours will boot into FireWire Target Disk Mode.
Now that you've learned about backing up, I'm sure you'll go out and buy a FireWire external HD, and if you get the PB working properly again, clone the PB's internal HD to the external. If you ever have software issues again, you can simply clone the latest backup back onto the PB's HD and be ready to go from that point.
Maybe you are looking for
-
hi, I have installed apex 2.2.1. Now it says: The structure of the link to the Application Express administration services is as follows: http://host:port/pls/apex/apex_admin from where i can get this port number? kindly help.. Regards, Saad.
-
Does PSE 11 offer Canadian customers any online storage/backup? Like some sort of "cloud"?
-
I have a hard time believing this cannot be done...but out of the box, I cannot seem to "force" horizontal or vertical navigation to reference only the children of the page. Typically, with other navigation systems in similar types of software, navi
-
[Solved] error: C compiler cannot create executables; see 'config.log'
Trying to build avant-window-navigator from the aur using yaourt results in this error message. I recently upgraded my system and suspect this may be the cause, but I'm not sure how to proceed from here. My config.log follows. This file contains an
-
Hi There. When I try to create an invoice, sometimes i receive this error message: <b>[OINV.GroupNum]. 'The connected value '77014798704179' was not found in table Customer/Vendor Cat. No.'</b> Could somebody help me with this situation? Thanks