After installing Leopard my available hard disk went down big time

What should I do?? I had 20gb on my macbook, installed leopard and now I have 6gb. a funny thing is when I go to finder it shows to hard disks?

Starting in safe mode fixed this issue if anyone is having the same issue or related issues. It appears starting is safe mode clears many things up pertaining to Leopard.

Similar Messages

My external drive went dead after installing Leopard

Hey guys
I'm very bummed out, my external HD went dead after installing Leopard on my Dual 2.3 GHz PowerPC G5. It was working perfectly fine before, had not a single problem with it but now, I've just lost all my work. I tried Disk Utility from the disc with no luck, it gave tons of errors and it say it couldn't be repaired. Now, it doesn't show up at all. Every single time I connect it I get a message saying the disk I inserted is not readable by the computer. This is a 200GB Maxtor external drive. Is there anything I can do to fix it? Any hardcore Software to retrieve my files? I'd appreciate if anyone can help me with this.
Thank you in advance

Movies are currently a one time download. Because of this, it is your responsibility to back them up so when something like this happens, you can simply copy them over the new drive.
You can't download them again with purchasing once again.

After installing Leopard went 2 install life 08 computer will not accept DV

I, actually, have two issues occurring since my install but I will list them separately. After installing Leopard on my G4 Powerbook, which was running tiger fine, I went to install iLife 08 which I purchased at the same time and when I put the DVD in the drive it asks me to choose an option to open CD/DVD...usually install disks just pop up and you start the process...any way I chose "finder" and it pulled the iLife install disk up as a blank CD/DVD with options to burn if I wanted. Any idea what setting may have been altered by the Leopard install and how I might be able to fix it? I appreciate any advice any of you may have...oh, I, also, just had a new memory module added at the genius bar yesterday to upgrade my system, so I could install this software.

Starting in safe mode fixed this issue if anyone is having the same issue or related issues. It appears starting is safe mode clears many things up pertaining to Leopard.

I can't install Snow leopard on my hard disk which has 10.4.11 on and lots of space.

I can't install Snow leopard on my hard disk which has 10.4.11 on it and lots of space, I run the snow Leopard install disk and it says it cant be installed on my hard disk, which has 160 GB of space.

Which iMac? If it's a G5, the highest OS you can run is Leopard. Are you using the full retail copy of Snow, or a grey, machine specific disc from another computer? If it's the latter, that's the reason.
Message was edited by: WZZZ

Why would hard disc crash after installing Leopard?

Shortly after installing Leopard on my Macbook, my hard drive crashed. I replaced the hard drive but the installation would not then complete because of an input/ output error (according to the log). The DVD installation disc is OK according to First Aid and there are no marks on the surface of the disc. The DVD drive appears to read other discs OK according toe First Aid.
Why would the hard drive crash and why will Leopard not install?

You could also check the connections to the new HD. Even if the connectors appear to be fully inserted, check for physical problems such as impacted pins, (ones that are bent or pushed back into the connector body) which won't make full contact. Check also for signs of sharp bending in the connector ribbon which may indicate a damaged or broken core.

After installing leopard my RAM went from 2 gig to 1 gig

after installing leopard my RAM went from 2 gig to 1 gig... any clues. I had 2 gigs and now my computer only sees 1 gig. Uhh so far leopard is worthless.

I understand there is a problem with some RAM and Leopard. Are both sticks the same brand? You may want to check with the manufacturer.

"Import Mailbox" not available after installing Leopard - no email

The first time I opened Mail after installing Leopard. It found my accounts and folders but nothing was in them. Everything I've read says to "Import Mailboxes" from the Library, however that option isn't available to me. (it is in shadow). Should I re-install Leopard? Is there a way to re-install just the "mail" rather than the whole operating system?

Restarting the MBPr a second time after the update resolved the issue for me. I was updating from 10.10.2.
Prior to resolving this, the symptoms I experienced were a loss of the Bluetooth icon in System Preferences, and no option to search for Bluetooth devices in both the Mouse and Keyboard menus. The Bluetooth icon in the top menu bar also had a squiggly line going through it, and when clicked reported Bluetooth not available.

I have upgraded my snow leopard to mavericks. Now I want to install the snow leopard in a hard disk partition. But the mac refuses to start the installation app on the snow leopard dvd. What to do?

I have upgraded my snow leopard to mavericks. Now I want to install the snow leopard in a hard disk partition. But the mac refuses to start the installation app on the snow leopard dvd. What to do?

Restart the computer with the disk in the drive and the C key held down.
(107242)

Disk permissions problem after installing Leopard

Hi!
I performed a Repair Permissions after installing Leopard. Firstly, I noticed that this procedure took a lot longer than before the upgrade. I also received the following error messages -
Repairing permissions for “Macintosh HD”
Warning: SUID file "usr/libexec/load_hdi" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DiskManagement.framework/Versions/A/Resources /DiskManagementTool" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Reso urces/Locum" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Install.framework/Versions/A/Resources/runner " has been modified and will not be repaired.
Permissions differ on "private/var/log/secure.log", should be -rw------- , they are -rw-r----- .
Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/readconf ig" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/writecon fig" has been modified and will not be repaired.
Warning: SUID file "usr/libexec/authopen" has been modified and will not be repaired.
Warning: SUID file "System/Library/CoreServices/Finder.app/Contents/Resources/OwnerGroupTool" has been modified and will not be repaired.
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.
ACL found but not expected on "Applications".
ACL found but not expected on "Library".
Permissions repair complete
What does all this mean? How can I fix it?
Thanks.

You suggest I reinstall all of Leopard and then update to 10.5.1?
No. Download and install the standalone 10.51 updater without reinstalling the entire OS.
I found 2 Remote Desktop updates (Client and Admin) - version 3.2. Are these for Leopard?
Use the client version.
How will this help my problem?
Those are status messages. You don't have a problem.
(26178)

Can't get past setup assistant after installing leopard...

i am having trouble getting past the setup assistant after installing leopard on my other computer which is a 1.25 ghz G4 desktop. Everything seems to be going fine then the setup assistant comes up and i go through the exercise of filling it out and at the end it says click on done and then you can use the computer. unfortunately it goes right back into the setup assistant like i had never gone there before. it is in some kind of loop. would it be wise to reinstall leopard? if so, does it know that it was installed already and rewrite over the first install? or is there something else i may try. i tried resetting the PRAM and some other things recommended but nothing seems to work. any help will be appreciated.
thanks in advance...

mr_magicman,
I can imagine how frustrating this must be for you. It sounds like you went for the (default) Upgrade option.
Okay, how about trying this:
1. With the *OS X 10.5 Install Disk 1* still in the bay, Restart your computer. Without access to menus, you'll have to use the power switch to turn it off. +[Alternatively, if you do have access to menus, select the Restart command (in the Apple menu) — always the preferred method.]+
2. If you're using the power switch method, here, wait about 10 - 15 seconds then depress the power switch again for about 5 full seconds (or until you hear the computer come back to life). +[Alternatively, if you had selected the Restart command in Step 1, the computer will start up again on its own.]+ *Either way, as the computer starts up, press and keep pressing, the Mouse until the disk ejects.* By the way, if you're using a Mighty Mouse with a left and right option, press down on the left side only. Hopefully this will get you out of the loop caused by your Install DVD remaining in the drive.
Finally, to be fair to you, I must tell you that there's a more suitable Forum for your particular kind of problem, viz., *Installation and Setup* (http://discussions.apple.com/forum.jspa?forumID=1219) I recommend you check out the questions/answers in that Forum in case your question has already been asked and answered.
PS. If you do re-post your question in that Forum, don't forget to mention whether or not you internal hard disk has been backed up.
GOOD LUCK!
Bill

After installing Leopard, my G4 will no longer boot in OS 9.22. (Classic still works, but I need it to boot in OS 9.) Any clues about what the Leopard installer might have done to my machine that rendered OS 9 boot unusable? What can I do to fix it?

After installing Leopard, my G4 will no longer boot in OS 9.22.
(Classic still works, but I need it to boot in OS 9.)
Any clues about what the Leopard installer might have done to my machine that rendered OS 9 boot unusable? (And what can I do to fix it?)
Details:
G4 Gigabit Ethernet
Boot ROM version: 4.2.8fl
Accelerator card added: 1.6 MHz
1.5 Gig Ram
I have erased the partition that had Leopard installed on it.
I zapped the pram.
In Open Firmware, I "reset-nvram", and then "reset-all"
I tried to reinstall G4 FW Update 4.2.8, but that must be done when booted from OS 9, and of course, that's the problem: it won't boot into 9.
I tried restarting from 9.2.1 DVD.
I tried restarting from an external firewire drive containing OS 9.2.2.
I tried moving a fresh OS 9.2.2 system folder into an empty partition on an internal hard drive. (Partition was created WITH OS 9 drivers installed.)
All attempts to boot into OS 9 give me the same results - grey screen - no spinning beach ball, no icons or logos - just a blank grey screen.
This machine still works fine in OS 10.3 and 10.4, and it worked fine for many years booting into OS 9, until I installed Leopard, and I haven't been able to boot into OS 9 since then, although I have done considerable research online and tried many things.
I have since learned that this machine does not support Leopard - 10.5. Fine, but how did it break 9.2.2?
Any help greatly appreciated.

Thanks for checking in, BDAQua.
Problem solved.
In the docs that came with my Powerlogix accelerator card, I found this sentence buried:
"If you reset the PRAM, the NVRAM code for OS9 compatibility is cleared, so you will have to boot from the Firmawre Update CD and perform this process again in order to boot in OS9."
The "process" it's referring to is the process of setting up the NVRAM for booting into OS9 from the CD.
Fortunately, I was able to find the disk, and it worked as expected. I can now, once again boot into OS9.
Conclusion: My (unadvised) attempt to load Leopard on this old machine apparently reset the PRAM on the accelerator card and cleared the NVRAM code for OS9 boot. Although I did attempt to reset the NVRAM via Open Firmware, it did not reset it on the accelerator card.
So, thank you BDAQua, for your "Ah yes" . . . that's all I needed to steer me in the right direction.
Gratefully,
tupester

Error Messages After Installing Leopard 2

After installing Leopard from the Install DVD, I used Software Update to update to 10.5.1, and updated QuickTime, etc. I also ran Cocktail, the Leopard edition. The Hard Drive checked out OK. When I ran Repair Permissions in Disk Utility, I got a number of error messages. One set starts like this: "Warning SUID file "System/Library/Private Frameworks/DiskManagement.framework/Versions/A/Resources/DiskManagementTool" has been modified and will not be repaired."
There are a number of messages like this. What shall I do?

Download and install this update, even though you've already updated.
(26492)

Error when trying to install Mountain Lion - says hard disk is damaged :(

I downloaded and installed Mountain Lion on my iMac today - without any problems. But when I downloaded it to my Macbook pro (bought 2010) I get an error message telling me the installation cannot continue due to hard disk error My harddisk was fine before the installation, to my knowledge ...
Of course I tried disk utility (during the installation) and it tells me the disk needs to be repaired but I can´t choose "Repair disk" since it is grey (no write permissions it says). What can I do? I really need help!!!

I rarely post, however, because of a major screw up with Mountain Lion, I will. I have been using mac computers since 1987, have obviously installed and upgraded multiple OS new and upgrades and never, I mean never had a problem with any of them, until now. The install stalled with the message that the hard disk needed repair. I thought all of my data was lost, except for time machine backup, which was not as current as it should have been. Losing that data would have been a royal pain.
Went through the restore OS from Time Machine, then tried to repair the disk with apple disk repair utility. Not repairable. Why? I still don't have a clue. After reading multiple threads, decided to go ahead and buy DiskWarrior. This was a weird experienc. Loaded it onto external hard drive, hooked my MacBook Pro as Target disk. Loaded in DiskWarrior as hardware probelm. ???? Immediately went online to see what advice about this message. Looked like a massive coincidence had hit my laptop. Worked perfectly until loading Mountain Lion, the decided to have hard disk melt down. Suddenly, DiskWarrior indicated it was ready to rebuild my directory. The hardware warning was gone. A few minutes later, directory repaired. Rebooted, same problem. Can't load OS X, need to repair hard disk. Apple disk repair still unable to repair disk. Used DiskWarrior, repaired it no problem.
Deleted original OS 10.8 dmg. Rebooted and downloaded fresh copy of OS 10.8. This time install went flawlessly. Mountain Lion transferred all info flawlessly. Mid 2009 MacBook Pro running flawlessly and actually more smoothly now than in Lion.
1. I think original download was somehow corrupted and that is what screwed up the disk directory.
2. I do not know why apple Disk Utility would not repair the disk and Disk Warrior would. Expensive fix, but ultimately worthwhile. Did it mysefl and did not have to mess with "Genius" bar.
3. I will never go so long without backup again. That was a big mistake.
My advice:
1. Be sure you have smooth download of entire Mountain Lion file, if not, start over. My download was paused a couple of times.
2. If the install is messed up and you need Disk Repair, buy DiskWarrior and repair directory, it works flawlessly. If it initially says your disk has hardware problem, wait a few minutes while it finishes entire evaluation. It may well disappear like mine did, then actually repair the directories without a problem.
3. Be sure you have deleted old OS 10.8 Install file and load fresh one.
4. Install OS 10.8 and you should be OK.
5. Good luck.
Mountain Lion seems to have some problems, but many of them may be due to server overload at apple, delayed download with incorporated unrecognized code problems. If there is any delay, start over and get a smooth download.
Disk Utility is too light weight. Apple needs to beef it up. This is my biggest complaint. Apple utility should be able to fix disks. We should not have to spend $100 to fix a disk, but there you are.
Once fixed however, back to usual beautiful, flawless apple experience.

Mac mini G4 won't mount music CD after installing Leopard

My Mac mini G4 has some issues mounting music CDs after installing Leopard. I did an "archive and install", everything seems to be working fine, except the CD issue. I have also applied all the relevant updates. I didn't have any issue with CDs in Tiger on this system.
Just after booting, the CD does mount. However, I can't eject it by dragging it to the trash can. I can unmount it only by hitting the eject button on the keyboard.
If I insert the CD again it won't appear on the desktop anymore. It doesn't appear in iTunes either, no matter how often I try.
I noticed someone else in these forums had the exact same problem. The problem was marked as solved, but in fact it wasn't. No information is available in the forum on how to solve it.

This EXACT scenario happens to me. It started the day I upgraded from 10.4.x to Leopard. My workaround is to go into Disk Utility, find the CD (which shows up as unmounted). Click on the CD. Then click the "Mount" button at the top. It works, but I'd like a real solution.

After installing Leopard I cant

After installing Leopard I cant upload pictures through myspace I have even tryed firefox and it doesnt work I also you safari . I called apple and they said something about a plug in issue. Has anyone else had this problem.
Just wondering?

I had installed Snow Leopard on my iMac 24" 2.4GHZ Intel machine. Previously everything had been working fine prior to my install. Coincidence being what it is, after I installed SL from DVD my menu bar items in the top right were not showing up and then my CD/DVD drive was not working. Would say that it can't read the inserted disc and my options were to choose ignore and eject.
I chose Ignore and went to Disk Utility and it could see the blank DVD I had inserted. But I could not burn the disc.
*Due to me having two issues at the same time, this complicates my ability to pinpoint what the solution was, but here's what I did and now everything is fine*
Before everything granular, I tried installing from SL disc again, in case that had been an issue...when that didn't work then...
First I removed a series of suggested .plist files that pertain to the menu bar, finder, clock, etc... That was for my menu bar issue (which didn't fix it by the way)
I then used disk utility from the SL DVD using that as start up disc, yes it loads fine. Verified and Repaired Disc permissions and drive. No issues.
I ran software update and installed 10.6.1 (still no fix to either problem)
I ran firmware update using the hold power button process during startup
(still no fix to either problem)
I reset the PRAM using boot up key sequence...still appeared to be no fix.
Then one more complete shut down and reboot...VOILA! *EVERYTHING REPAIRED*!!!
So I have no idea WHAT did it, or WHY. However, that process now has me burning DVDs successfully and I have all my menu items back.
I know it's not the most helpful response, but I can tell you everything works fine now.

After installing Leopard my available hard disk went down big time

Similar Messages

Maybe you are looking for