After installing leopard my RAM went from 2 gig to 1 gig

after installing leopard my RAM went from 2 gig to 1 gig... any clues. I had 2 gigs and now my computer only sees 1 gig. Uhh so far leopard is worthless.

I understand there is a problem with some RAM and Leopard. Are both sticks the same brand? You may want to check with the manufacturer.

Similar Messages

  • My external drive went dead after installing Leopard

    Hey guys
    I'm very bummed out, my external HD went dead after installing Leopard on my Dual 2.3 GHz PowerPC G5. It was working perfectly fine before, had not a single problem with it but now, I've just lost all my work. I tried Disk Utility from the disc with no luck, it gave tons of errors and it say it couldn't be repaired. Now, it doesn't show up at all. Every single time I connect it I get a message saying the disk I inserted is not readable by the computer. This is a 200GB Maxtor external drive. Is there anything I can do to fix it? Any hardcore Software to retrieve my files? I'd appreciate if anyone can help me with this.
    Thank you in advance

    Movies are currently a one time download. Because of this, it is your responsibility to back them up so when something like this happens, you can simply copy them over the new drive.
    You can't download them again with purchasing once again.

  • After installing Leopard went 2 install life 08 computer will not accept DV

    I, actually, have two issues occurring since my install but I will list them separately. After installing Leopard on my G4 Powerbook, which was running tiger fine, I went to install iLife 08 which I purchased at the same time and when I put the DVD in the drive it asks me to choose an option to open CD/DVD...usually install disks just pop up and you start the process...any way I chose "finder" and it pulled the iLife install disk up as a blank CD/DVD with options to burn if I wanted. Any idea what setting may have been altered by the Leopard install and how I might be able to fix it? I appreciate any advice any of you may have...oh, I, also, just had a new memory module added at the genius bar yesterday to upgrade my system, so I could install this software.

    Starting in safe mode fixed this issue if anyone is having the same issue or related issues. It appears starting is safe mode clears many things up pertaining to Leopard.

  • After installing Leopard, my G4 will no longer boot in OS 9.22. (Classic still works, but I need it to boot in OS 9.)  Any clues about what the Leopard installer might have done to my machine that rendered OS 9 boot unusable? What can I do to fix it?

    After installing Leopard, my G4 will no longer boot in OS 9.22.
    (Classic still works, but I need it to boot in OS 9.)
    Any clues about what the Leopard installer might have done to my machine that rendered OS 9 boot unusable? (And what can I do to fix it?)
    Details:
    G4 Gigabit Ethernet
    Boot ROM version: 4.2.8fl
    Accelerator card added: 1.6 MHz
    1.5 Gig Ram
    I have erased the partition that had Leopard installed on it.
    I zapped the pram.
    In Open Firmware, I "reset-nvram", and then "reset-all"
    I tried to reinstall G4 FW Update 4.2.8, but that must be done when booted from OS 9, and of course, that's the problem: it won't boot into 9.
    I tried restarting from 9.2.1 DVD.
    I tried restarting from an external firewire drive containing OS 9.2.2.
    I tried moving a fresh OS 9.2.2 system folder into an empty partition on an internal hard drive. (Partition was created WITH OS 9 drivers installed.)
    All attempts to boot into OS 9 give me the same results - grey screen - no spinning beach ball, no icons or logos - just a blank grey screen.
    This machine still works fine in OS 10.3 and 10.4, and it worked fine for many years booting into OS 9, until I installed Leopard, and I haven't been able to boot into OS 9 since then, although I have done considerable research online and tried many things.
    I have since learned that this machine does not support Leopard - 10.5. Fine, but how did it break 9.2.2?
    Any help greatly appreciated.

    Thanks for checking in, BDAQua.
    Problem solved.
    In the docs that came with my Powerlogix accelerator card, I found this sentence buried:
    "If you reset the PRAM, the NVRAM code for OS9 compatibility is cleared, so you will have to boot from the Firmawre Update CD and perform this process again in order to boot in OS9."
    The "process" it's referring to is the process of setting up the NVRAM for booting into OS9 from the CD.
    Fortunately, I was able to find the disk, and it worked as expected. I can now, once again boot into OS9.
    Conclusion: My (unadvised) attempt to load Leopard on this old machine apparently reset the PRAM on the accelerator card and cleared the NVRAM code for OS9 boot. Although I did attempt to reset the NVRAM via Open Firmware, it did not reset it on the accelerator card.
    So, thank you BDAQua, for your "Ah yes" . . . that's all I needed to steer me in the right direction.
    Gratefully,
    tupester

  • After installing Leopard I cant

    After installing Leopard I cant upload pictures through myspace I have even tryed firefox and it doesnt work I also you safari . I called apple and they said something about a plug in issue. Has anyone else had this problem.
    Just wondering?

    I had installed Snow Leopard on my iMac 24" 2.4GHZ Intel machine. Previously everything had been working fine prior to my install. Coincidence being what it is, after I installed SL from DVD my menu bar items in the top right were not showing up and then my CD/DVD drive was not working. Would say that it can't read the inserted disc and my options were to choose ignore and eject.
    I chose Ignore and went to Disk Utility and it could see the blank DVD I had inserted. But I could not burn the disc.
    *Due to me having two issues at the same time, this complicates my ability to pinpoint what the solution was, but here's what I did and now everything is fine*
    Before everything granular, I tried installing from SL disc again, in case that had been an issue...when that didn't work then...
    First I removed a series of suggested .plist files that pertain to the menu bar, finder, clock, etc... That was for my menu bar issue (which didn't fix it by the way)
    I then used disk utility from the SL DVD using that as start up disc, yes it loads fine. Verified and Repaired Disc permissions and drive. No issues.
    I ran software update and installed 10.6.1 (still no fix to either problem)
    I ran firmware update using the hold power button process during startup
    (still no fix to either problem)
    I reset the PRAM using boot up key sequence...still appeared to be no fix.
    Then one more complete shut down and reboot...VOILA! *EVERYTHING REPAIRED*!!!
    So I have no idea WHAT did it, or WHY. However, that process now has me burning DVDs successfully and I have all my menu items back.
    I know it's not the most helpful response, but I can tell you everything works fine now.

  • Error Messages After Installing Leopard 2

    After installing Leopard from the Install DVD, I used Software Update to update to 10.5.1, and updated QuickTime, etc. I also ran Cocktail, the Leopard edition. The Hard Drive checked out OK. When I ran Repair Permissions in Disk Utility, I got a number of error messages. One set starts like this: "Warning SUID file "System/Library/Private Frameworks/DiskManagement.framework/Versions/A/Resources/DiskManagementTool" has been modified and will not be repaired."
    There are a number of messages like this. What shall I do?

    Download and install this update, even though you've already updated.
    (26492)

  • Why Mac Help doesn't work after installing Leopard?

    After installing Leopard Mac Help shows a untitled window and after few seconds it disappear.

    Actually no. I'm working on the same environment before installing Leopard. No firewall...but I'm working from China where a massive Great Firewall is controlled by the government. That case I shouldn't be the only one.
    Fernando

  • Finder not working after installing Leopard!!!

    Hi everyone.
    I'm getting a strange Finder behavior on my Intel iMac (not the newest version) after installing Leopard. The thing is, after instalation, when I start the computer, the top bar on the screen starts blinking, and there's no way to open a Finder window. And it stays like that forever! I tried to open Finder from the Dock, but the blue dot of the active programs blinks 3 or 4 times and then disapears. Plus, the only way to access the Apple logo on the corner to switch the computer off or restart it, is by opening one other program from the dock (in this case I have Safari running), because this way the top bar stops blinking.
    So, I thought I should try to update Leopard to 10.5.1, and this could solve the problem. But no. It searches for new software updates, tells me that there are new updates, but I cannot see them nor install them!
    This is really weird and annoying!
    Anyone had this problem? Please, help me.
    P.S.: Yes, I've tryed a second install of Leopard. Same thing!

    anamorphis wrote:
    Hi everyone.
    I'm getting a strange Finder behavior on my Intel iMac (not the newest version) after installing Leopard. The thing is, after instalation, when I start the computer, the top bar on the screen starts blinking, and there's no way to open a Finder window. And it stays like that forever! I tried to open Finder from the Dock, but the blue dot of the active programs blinks 3 or 4 times and then disapears. Plus, the only way to access the Apple logo on the corner to switch the computer off or restart it, is by opening one other program from the dock (in this case I have Safari running), because this way the top bar stops blinking.
    So, I thought I should try to update Leopard to 10.5.1, and this could solve the problem. But no. It searches for new software updates, tells me that there are new updates, but I cannot see them nor install them!
    This is really weird and annoying!
    Anyone had this problem? Please, help me.
    P.S.: Yes, I've tryed a second install of Leopard. Same thing!
    Do NOT install any updates until you resolve the problem, which is unrelated to any updates. Updating a computer that is not working correctly will only make the problems worse, never better.
    If this is the second install, was it on an erased HD or did you import your previous programs, etc?
    It sounds like you might have some errant 3rd party software running.
    Did you run a disk check and file permission verify/repair before installing?
    Check your startup program window and remove everything there. Write them down so you can put them back later.

  • Can't get past setup assistant after installing leopard...

    i am having trouble getting past the setup assistant after installing leopard on my other computer which is a 1.25 ghz G4 desktop. Everything seems to be going fine then the setup assistant comes up and i go through the exercise of filling it out and at the end it says click on done and then you can use the computer. unfortunately it goes right back into the setup assistant like i had never gone there before. it is in some kind of loop. would it be wise to reinstall leopard? if so, does it know that it was installed already and rewrite over the first install? or is there something else i may try. i tried resetting the PRAM and some other things recommended but nothing seems to work. any help will be appreciated.
    thanks in advance...

    mr_magicman,
    I can imagine how frustrating this must be for you. It sounds like you went for the (default) Upgrade option.
    Okay, how about trying this:
    1. With the *OS X 10.5 Install Disk 1* still in the bay, Restart your computer. Without access to menus, you'll have to use the power switch to turn it off. +[Alternatively, if you do have access to menus, select the Restart command (in the Apple menu) — always the preferred method.]+
    2. If you're using the power switch method, here, wait about 10 - 15 seconds then depress the power switch again for about 5 full seconds (or until you hear the computer come back to life). +[Alternatively, if you had selected the Restart command in Step 1, the computer will start up again on its own.]+ *Either way, as the computer starts up, press and keep pressing, the Mouse until the disk ejects.* By the way, if you're using a Mighty Mouse with a left and right option, press down on the left side only. Hopefully this will get you out of the loop caused by your Install DVD remaining in the drive.
    Finally, to be fair to you, I must tell you that there's a more suitable Forum for your particular kind of problem, viz., *Installation and Setup* (http://discussions.apple.com/forum.jspa?forumID=1219) I recommend you check out the questions/answers in that Forum in case your question has already been asked and answered.
    PS. If you do re-post your question in that Forum, don't forget to mention whether or not you internal hard disk has been backed up.
    GOOD LUCK!
    Bill

  • Mac mini G4 won't mount music CD after installing Leopard

    My Mac mini G4 has some issues mounting music CDs after installing Leopard. I did an "archive and install", everything seems to be working fine, except the CD issue. I have also applied all the relevant updates. I didn't have any issue with CDs in Tiger on this system.
    Just after booting, the CD does mount. However, I can't eject it by dragging it to the trash can. I can unmount it only by hitting the eject button on the keyboard.
    If I insert the CD again it won't appear on the desktop anymore. It doesn't appear in iTunes either, no matter how often I try.
    I noticed someone else in these forums had the exact same problem. The problem was marked as solved, but in fact it wasn't. No information is available in the forum on how to solve it.

    This EXACT scenario happens to me. It started the day I upgraded from 10.4.x to Leopard. My workaround is to go into Disk Utility, find the CD (which shows up as unmounted). Click on the CD. Then click the "Mount" button at the top. It works, but I'd like a real solution.

  • PowerBook G4 will not shut down after installing Leopard

    Hi - has anyone found shut down problems (or restart for that matter) after installing Leopard. I've got 30Gb of hard drive free on a Powerbook G4 (3 years old).

    No I don't.
    Looking around for answers to this one it seems it is a fairly common problem with new Leopard users. One solution (apparently from Apple) was to delete the cache folders in both the user's home folder and in the top-level system folder. I have tried that but no luck yet.

  • Problem with chess after installing Leopard

    The other week I did an Archive and Install of Leopard on my MacBookPro running Tiger. Several applications failed to work following the install and this has been solved by downloading new versions. Although chess seems to be more problematic. Every time I launch chess I just get a message saying that chess has unexpectedly quit. However this behaviour is starting to become expectable. I have read other posts reporting similar problems after installing Leopard however they are able to play a couple of moves before it quits. For me chess does not even launch.
    I have tried trashing the preference file, creating and using a new user account, and copying chess from another computer. The copied application just states that I can not use chess with this version of OSX.
    Does anyone have any ideas as I really do not want to have to reinstall Leopard just for a application I only use when very bored (which is surprisingly often).
    Thanks for any help you can give.
    Chuck

    Thanks for pointing out that app. Very useful indeed.
    I have deleted my copy of chess and reinstalled a new copy from the OSX Leopard install disk and it still fails to launch.
    Any other ideas?

  • Problems hotsynching addresses after installing Leopard

    I've had no problem synching my Tungsten E2 before, but after installing Leopard on my MacBook, the addresses are no longer synching either from my Mac to my handheld or vice versa. The calendar seems to be synching just fine. There's nothing wrong with my conduit setting and the messages tell me the synch "has worked" but obviously it hasn't--there's no changes in either address book. I have addresses both on the computer and the handheld now which don't exist on the other, so I don't want to do a complete override.
    I called Palm Tech support and plunked down my $14.95 and the woman there could only tell me to check my conduit settings, something I had already done. No help there. 
    Also, there are some addresses that are more up to date and correct on one device or on the computer and I can't figure out how to compare the two so I can choose the most recent changes to be the "master."
    I'd love any help you can give me. the first problem, obviously is more pressing!
    Thanks, Laura 
    Post relates to: Tungsten E2

    Same here with a Centro/ palm phone from Verizon.  It's picking up the phone numbers, but leaving nothing for the addresses.  It was working fine with synching both addresses and numbers, but it seems like after the latest update, it dropped the addresses.  Will be searching other forums for an answer.  Using a MacBook Pro with 10.5.5. (Although registering for this forum I could only chose 10.4 as my operating system.  Come on Palm... you do know Apple has released a new OS, don't you?)
    Post relates to: Centro (Verizon)

  • UNABLE TO OPEN FCP 6.02 PROJECT FILES AFTER INSTALLING LEOPARD!

    **Unable to open FCP 6.02 project files after installing Leopard**. Tested and found that the files can be opened on another computer with OS 10.4.10, but not OS 10.5. Spoke to apple support many times, and have tried reinstalling FCP, but it didn't work.
    Apple is now saying to erase my HD and reinstall from scratch. This presents a problem since i have software installed but no disc due to a move, (they are deep in offsite storage).
    Anyone have this problem? Anyone know a fix?

    Lynne,
    There is a section in the manual on the migration tool... I don't have my machine fired up right now so can't direct you to the exact page. I think a search for migration or migrate should do it.
    Two other things to try:
    1. There have been numerous reports that Quicktime 7.3 is what is killing older projects. According to one of the third party program makers Apple re-wrote Quicktime changing the null value to Zero from minus-one. I'm not a code junkie so can't vouch for this but the upshot would be, go back to Quicktime 7.1 or 7.2 not 7.3
    2. There is a Quicktime plugin called "Perian". For lots of people it has caused numerous problems.
    Look for Perian on your machine and if you find it, drag the app to the trash... re boot and try again.
    Of course the ultimate solution would be to reinstall Tiger, Final Cut Studio 2 and Quicktime 7.2. So far the most stable combined setup for me and lots of others on G5 machines.
    36 degrees and thunderstorms with sleet here this afternoon. The door on my storage unit is staying closed.
    Message was edited by: John Criswell

  • After installing Leopard I cannot connect onto company server

    After installing Leopard I am unable to connect to our company server. I was able to see the server when I was on tiger. I tried to connect the server manually but it seems I can't even do that. What to do next ? Server connects both PCs and Mac in the office.
    I went into finder preference and click connect to server. I don't see any of our three servers that I saw on tiger. Not sure what to do next.
    I get the message
    The server does not exist or it is not operational at this time. Check the server name or IP address and your network connection and try again.

    I wish I was writing with an answer, but all I can really offer is that "I feel your pain". In my case, after upgrading to Leopard, I can see many, but nowhere near all, computers on our network, and there's no obvious explanation for who appears and who doesn't. Worse, I can see the one I most need to see (my administrative assistant) but there is no option to file share through drop boxes or any other mechanism we've found (despite enabling those options in preferences) and the only option listed is to "share screen" -- which is interesting since my assistant's computer is running Tiger, and selecting it on my end fails every time!
    What gives!?! It's tough being the local mac evangelical when s**t like this goes down!

Maybe you are looking for