After installing Leopard went 2 install life 08 computer will not accept DV

I, actually, have two issues occurring since my install but I will list them separately. After installing Leopard on my G4 Powerbook, which was running tiger fine, I went to install iLife 08 which I purchased at the same time and when I put the DVD in the drive it asks me to choose an option to open CD/DVD...usually install disks just pop up and you start the process...any way I chose "finder" and it pulled the iLife install disk up as a blank CD/DVD with options to burn if I wanted. Any idea what setting may have been altered by the Leopard install and how I might be able to fix it? I appreciate any advice any of you may have...oh, I, also, just had a new memory module added at the genius bar yesterday to upgrade my system, so I could install this software.

Starting in safe mode fixed this issue if anyone is having the same issue or related issues. It appears starting is safe mode clears many things up pertaining to Leopard.

Similar Messages

I am trying to re-install CS3 after having to replace my Hard drive, but it will not accept my serial

I am trying to re-install CS3 after having to replace my Hard drive, but it will not accept my serial #. How can I get it to allow me to continue using my software?

If you had registered your CS3, you can get the serial number from your Adobe account when you log in through the Adobe corporate web site. Just go to My Products to find it in your account.
Adobe applications show you a truncated s/n to discourage software piracy. Legitimate Adobe s/ns have 24 digits.

After installing Mountain Lion, contacts will not sync

After installing Mountain Lion, contacts will not sync to iphone 3G

I have the same problem... but when i connect my MacBook Pro late 2009 on my cousin internet the facebook page works normaly. but when i reconnect in my wifi it stops to work again... and it only hapens with macbook pro, On my iPad, iPhone and PC the facebook page works properly. And another thing, when my counsins bring their Macbooks to my network, it stops to enter on facebook too... I already reset my router config everything and facebook dont work with anything with mountain lion... My router is a linksys wag200n and the problem started when i install mountain lion. Thanks for help and sorry for bad english xD.

HT4623 after installing ios7 my Iphone4 will not work

after installing ios7 my Iphone4 will not work

Try a reset: hold down the home button along with the power button until you see the Apple, then let go.

After install when starting photoshop will not load so I can enter serial number

after installing photoshop cs3 on windows 7 when I start photoshop it will not load so I can enter serial number. why?

iOS devices cannnot be tracked or located with just the serial number. Unless you shared your Apple ID and password with anyone, then your account cannot be accessed at the iTunes Store.
Reporting a lost or stolen Apple product
To be on the safe side, change your Apple ID password ASAP > Support - Apple ID
Read here > Apple ID: Tips for protecting the security of your account

Curve 9300 , after installing upgrade 6.0 will not reboot

Hello, after installing an update the curve 9300 will not reboot, i removed the battery many times and same thing. what should i do now? i tried installing the new 6.0 bundle update using my laptop.

I had bad malfunction after installing update to 9300. I had to take it back to O2 who were great and replaced it with a brand new 9300 as the first one could not be repaired. It was the upgrade that caused problem, it was fine B4 that.
MalQum

After installing Firefox6 many sites will not finish loading. I click on "stop loading this page" and then click on "reload this page" and the page loads. Also if I disable javascript the page will load.

After installing Firefox 6 MANY web site will not finish loading. I disabled all add-ons and still have the problem. If I disable javascript, the pages will load. When the page is trying to load, if I hit "stop loading this page" and then hit "reload this page", the page will load; but sometimes I have to do this 2-3 times for the page to finish loading. No problem with these pages using IE8.

I see that you ave changed some network.http prefs. 
Doing that can cause all kinds of problems because not all servers like such changes, so you can try to reset those prefs on the about:config page. 
network.http.max-connections 48 
network.http.max-connections-per-server 16 
network.http.max-persistent-connections-per-proxy 16 
network.http.max-persistent-connections-per-server 8 
network.http.pipelining true 
network.http.pipelining.firstrequest true 
network.http.pipelining.maxrequests 8 
network.http.proxy.pipelining true 
network.http.request.max-start-delay 0 
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

Problem after installing 6.03 iTunes- Will not start up...please help!!!!!

I recently gave into the decision of installing the new iTunes update to 6.03 Everything was working fine, but I thought I should upgrade. Now I cannot start iTunes. When I click on the icon it shows an hourglass for about 2 seconds and then goes away. Ive tried reinstalling, but to no avail. If anybody knows what to do it'd be GREATLY appreciated. Thanks for all of your support! J

I am also having a problem opening iTunes after installing the latest version, 6.03. Every now and then, it will open after I do some troubleshooting, but the problem persists the next time I try to open it. Once I opened iTunes in safe mode and then restarted in the normal mode and iTunes started properly. Another time, I took off the iTunes Help application from my start up items under my account and I was able to open iTunes. Another time, I opened iTunes from the actual data file and I was able to open iTunes. But as soon as I close iTunes and try to open it up again the next time around, it does not respond. What is going on? How can I get rid of 6.03 and go back to the previous version without losing my music?

After installing Lion my keyboard will not work at all and it will not recognize my wi-fi connection at times. Any ideas for a solution to this problem?

It will not let me type anything now and the wi-fi connection is not recognized at times! Please help!! This only happened after I downloaded Lion.

Now that you have restored it to Apple software, we can help - no kidding.
If WiFi is grayed out (tap Settings first) then you will not be able to select WiFi. See this article: http://support.apple.com/kb/TS1559
If you can select WiFi, your touch will then detect WiFi networks that are within range. Networks that are protected by encryption will display with a closed lock. Open networks will have an open lock. Networks are displayed by strongest signal to weakest signal.
Closed/locked networks require a password or WEP key to join. Open networks often require that you agree to terms and conditions for that network. This usually occurs with a Safari-like screen that appears 15-30 seconds after you tap on the network. Until you go through that screen, it might look like you are connected but you are not.
Spend some time going through the basic WiFi troubleshooting guide: httpL//support.apple.com/kb/TS1398

After installing mavericks, the iMac will not wake from sleep properly (at all)

I've upgraded to 10.9 (late 2012 21" iMac), and I notice in the morning when the iMac has been sleeping overnight, it will not wake up,
During the day, if it sleeps for a few hours, it seems fine, and wakes normally, prompting me to type my password,
In the morning however, I hit a key (on my wireless keyboard), and the display wakes up, I get a dark grey screen, and see the loading circle (not the beachball) in the middle, and see the cursor for a few seconds, before it then disappears, and reappears.
This cycle repeats itself,
The 'fix' is to do a forced shutdown by holding the powwer button until it shuts down, and then restart.
Anyone else find this problem/find a solution?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

After installing mountain lion facebook will not load on iMac

Any helpers Please !!

I have the same problem... but when i connect my MacBook Pro late 2009 on my cousin internet the facebook page works normaly. but when i reconnect in my wifi it stops to work again... and it only hapens with macbook pro, On my iPad, iPhone and PC the facebook page works properly. And another thing, when my counsins bring their Macbooks to my network, it stops to enter on facebook too... I already reset my router config everything and facebook dont work with anything with mountain lion... My router is a linksys wag200n and the problem started when i install mountain lion. Thanks for help and sorry for bad english xD.

After installing 10.6.8 will not boot even from 10.6 disk HELP

Will only start in safe mode, Safari crashes so no help there to get back to 10.6.7 and will not boot from my 10.6 SL disk. HELP! Can't find the orignal disks so I am in a bad way...

Call AppleCare and request replacement discs. You can also Zap the PRAM and Reset the SMC and see if those will fix things up. You updated to 10.6.8 w/o having a bootable backup/clone or Time Machine backup? Bad move, that.

After installing 4.0 firefox will not load from short cut or program

ckicking ico or program will not load. reinstall 4.0 works but when closed it will not reopen.

Do you get any error messages?
Make sure that Firefox closes properly and that there isn't a hanging Firefox or plugin-container process left in the task manager.
*http://kb.mozillazine.org/Kill_application
Use "Firefox/File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit") to close Firefox if you are currently doing that by clicking the close X on the title bar.
See also:
*"Hang at exit": http://kb.mozillazine.org/Firefox_hangs
*"Firefox hangs when you quit it": https://support.mozilla.org/kb/Firefox+hangs
You can use one of these to start Firefox in Safe mode:
*On Windows, hold down the Shift key while starting Firefox with a double-click on the Firefox desktop shortcut
*On Mac, hold down the Options key while starting Firefox
*Help > Restart with Add-ons Disabled
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
-----

I have a macbook latest update & am trying to install flash player 7 will not accept password & I have triesd both administrator password & adobe password & "ok" keeps jumping w/o any message other than hint: black & white" I'm confused & frustrated.

I am a macbook user latest update & cannot get beyond the password - have used Adobe password & administrator password but the "ok" keeps jumping - hint: says "black & white" Very frustrating.

This password prompt is presented by your operating system, and is intended to keep you from accidentally installing software.
If this is your personal machine and you don't need a password to log into the computer when it first starts up, you can probably leave the password blank and click OK to get past this prompt. If this is your personal machine and your normal password isn't working, check to make sure that CAPS LOCK is off, and type the password carefully.
If this is your work machine and it's asking for an Administrator password, well, you'll need to have a conversation with your friendly IT person.
If you're still stumped, you may need to reset the password on your Mac:
http://support.apple.com/kb/PH18653
http://support.apple.com/kb/PH14325
http://support.apple.com/en-us/HT201240

When I try to install a download it will not accept my mac password

When I try to install a download item and when I try to uninstall a program it says I don't have the correct password. I changed my password but it still won't accept it. Really frustrating.

Hello, is this how you did it?
Reset Password 10.7, 10.8...
http://reviews.cnet.com/8301-13727_7-20087723-263/how-to-run-the-password-reset- utility-in-os-x-10.7-lion/
Then Reset your Keychain...
http://support.apple.com/kb/TS1544

After installing Leopard went 2 install life 08 computer will not accept DV

Similar Messages

Maybe you are looking for