After installing Lion my keyboard will not work at all and it will not recognize my wi-fi connection at times. Any ideas for a solution to this problem?
It will not let me type anything now and the wi-fi connection is not recognized at times! Please help!! This only happened after I downloaded Lion.
Now that you have restored it to Apple software, we can help - no kidding.
If WiFi is grayed out (tap Settings first) then you will not be able to select WiFi. See this article: http://support.apple.com/kb/TS1559
If you can select WiFi, your touch will then detect WiFi networks that are within range. Networks that are protected by encryption will display with a closed lock. Open networks will have an open lock. Networks are displayed by strongest signal to weakest signal.
Closed/locked networks require a password or WEP key to join. Open networks often require that you agree to terms and conditions for that network. This usually occurs with a Safari-like screen that appears 15-30 seconds after you tap on the network. Until you go through that screen, it might look like you are connected but you are not.
Spend some time going through the basic WiFi troubleshooting guide: httpL//support.apple.com/kb/TS1398
Similar Messages
-
I have an iphone 4 nearly 2 yrs old. It has worked perfectly for that time. On Friday last (whilst away on holiday) I took the phone out of my pocket & it was lifeless. I tried switching it on, no joy, I tried the power/home button reset no joy. I plugged it into a mains charger & it came on but had a banner across the screen saying "verification required". I removed the charger & decided I would try again when I got home so I could connect to my PC & iTunes.
At home I went through the whole above process again but when I plugged it into the mains again it just had the Apple logo going on/off repeatedly. I plugged the phone into my PC & the apple logo appeared followed by the "connect to iTunes". In iTunes I get the banner "iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes". So I click on "OK" the "Restore" then a banner asking if I'm sure I want to restopre the iPhone appears, press "Restore & Update". iTunes starts to remove the software, veryfies it with Apple & then another flag "The iPhone could not be restored. An unknown error occurred (21) which appears to be a security issue.
I thought the above problem was something to do with O2 because I picked up my new iPhone 4S last Tuesday but was unable to set it up until I got back from my holiday, O2 say it isn't anything they've done.
My question is has it happened to anyone & can anybody offer a solution, is it a hardware or software issue?Please see the two articles below:
http://support.apple.com/kb/TS3694
http://support.apple.com/kb/TS3125 -
I finally got so tired of Firefox freezing my computer that I tried to uninstall and reinstall. Upon reinstall, it will not work at all and I am unable to delete my old user profile. Is there any way to get rid of this profile so I can give one last attempt to get Firefox to work before switching permanently to Google Chrome? I really liked Firefox for years until they screwed it up with the recent changes.
Try running Firefox in [[Safe Mode]]. If it functions properly in that configuration, then one of your add-ons is the culprit.
-
I want to sync tasks in Outlook with my iPhone. I have tried Toodledo (not good) and Todo. Todo works, but it cuts off most of the text. I only get the beginning of my (long) lists. Any ideas how I can solve this problem? I starting to regret that I switched to iPhone...
Usually if you have some kind of hardware failure there is some beeping during POST or most motherboards now have LED indicators to produce and error message based on the type of failure
So if its bad memory, not place properly, mismatched, processor not inserted properly, mismatched voltage or voltage connector not present etc it beeps or generates the error id.
Power supplies can be tested for failure. There are some walk throughs for testing just them with a switch, paperclip or a jumper (I'd suggest not doing this if you are not familiar with the dangers of electricity).
Memory can be tested with memory diagnostics programs like Memtest+
Processors can overheat if the proper precautions have not been taken usually you will get a POST beep or error code for that.
If the motherboard has no response then do the basics first:
Check power connectors and power supply. Once you determine that is not the case move on to other items like graphics cards in all the way or memory. -
tried to run ios5 upgrade, get unkown error 0xE8000065 and now ipad does not work at all and is frozen can not even switch off
Try a hard reset and go from there. You might try a manual install (using DFU Mode), as outlined in the link below.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
In Memory of Steve Jobs -
The personal hotspot is not working with me and I did not fine the icon for iphone 4 version 5.1.1
Check with your carrier or telephone service provider. Not all carriers provide this service.
-
Hi all,
Can any one find a solution to this problem [ID CC 2014 has stopped working] for this file{Dropbox - Questions CH-5 .indd}
Note: I could open it, but suddenly I have faced this issue with just this file no any other of my files.
Thanks for your help.try the blind export to .idml script at Adobe Community: InDesign 6 is crashing when attempting to open a particular document. All others are opening OK.
-
I have iWorks for a Mac Mini, I want to install that software on my MackBook Air, but it keeps telling me to update the software, I have updated it several times. Still no go, any ideas how to get past this problem? Thanks!
Movies are not bought via Netflix, then are rented or borrowed.
For iTunes account issues, contact iTunes Customer Support. -
My iphone (ios 7.1) is not showing the apple tv icon from my pull up control center? They are both running on the same wifi network... Any ideas on how to fix this problem?
Was it working before? Is your Apple TV enabled for airplay?
See
http://support.apple.com/kb/TS4215?viewlocale=en_US&locale=en_US -
When I insert a disk, a disk icon does not appear on my desktop, nothing happens and there is no option to eject. I have to restart in order to eject the disk. Any ideas on how to fix this problem?
-
The headphone jack on my macbook air isn't working. I have plugged in two headphones and both won't work although they do work on other devices. Any ideas on how to resolve this problem?
update to latest OSX 10.9.3
reset SMC , you likely put your Air into sleep mode with phones attached.
update the OSX to fix the issue. -
I have tried several times to load version 11.4 and keep getting an error code2324, now I cannot sync any of my apple products. I set my machine to a previous recover date, now iTunes will not work at all. I get a message stating I do not have the administrator rights to download. Any thoughts on this issue?
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
Cannot open itunes after installing Lion. Says trying to restore windows and then quits
same
Message was edited by: Ben123212321 -
My touch scree will not work at all. It just stopped one day and has not worked since. I've tried numerous times to restart it but with no success at all. The only tning I haven't tried is resetting it back to it's original setting when I bought it 2 years ago> Any suggestions??
When resetting the iPod to factory defaults/new iPod fails to resolve a problem, the problem is likely due to a a hardware problem. An appointment at the Genius Bar of an Apple store is then in order.
-
After taking days to upload elements 13 I am now having trouble even trying to import my images and videos into the program for editing. Each time I IMPORT files an error message comes up that says " ....has stopped working, we are looking for a solution to the problem and will notify you if a solution is found" I have not been able to edit ANYTHING or even drag files/images to the time line.... is it me? is my computer too slow? surely if it was, then Adobe elements 13 would not have installed in the first place? please someone help me sort this out as I have a deadline to make for a docco! thanks in advance Lyddy
From the Premiere Elements Information FAQ http://forums.adobe.com/thread/1042180
•You MUST use an account with Administrator Privileges to run Premiere Elements
•(Doing Run as Administrator http://forums.adobe.com/thread/969395 [says Encore and also for "All" versions of Premiere] will sometimes fix "odd" errors)
•What version of Premiere Elements? Include the minor version number (e.g., Premiere Elements 12 with the 12.1 update)
•What operating system? This should include specific minor version numbers, like "Mac OSX v10.9.4"---not just "Mac"
•Has this ever worked before? If so, do you recall any changes you made to Premiere Elements, such as adding Plug-ins, brushes, etc.? Did you make any changes to your system, such as updating hardware, printers or drivers; or installing/uninstalling any programs?
•Have you installed any recent program or OS updates? (If not, you should. They fix a lot of problems.)
•What kind(s) of image file(s)? When talking about camera raw files, include the model of camera.
•If you are getting error message(s), what is the full text of the error message(s)?
•What were you doing when the problem occurred?
•What other software are you running?
•Tell us about your computer hardware. How much RAM is installed? How much free space is on your system (C:) drive?
•How many and what speed are your hard drive(s)... ie 5400rpm or 7200rpm or?
And some other questions...
•What are you editing, and does your video have an orange line over it BEFORE you do any work?
•Which version of Quicktime do you have installed?
•What is your exact brand/model graphics adapter (ATI or nVidia or ???)
•What is your exact graphics adapter driver version?
•Have you gone to the vendor web site to check for a newer driver?
•For Windows, do NOT rely on Windows Update to have current driver information
•-you need to go direct to the vendor web site and check updates for yourself
•nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us
•ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
Maybe you are looking for
-
Problem Connecting my iPAD3 to WiFi - LAN
Untill today using ADSL broadband and ZyXel WiFi Router. With this I was able to connect iPad3 to internet. iPad --> ZyXel WiFi Router --> Internet. I changes my internet service provider to Hathway. So I connected WiFi Router <--> Cisco Cable Modem
-
Hi Gurus , Pls tell me concept of sales set and bom . I Wanna to know the complete process about it . Thanks and Regards , Raj Bajoria ( Raja)
-
Hi there, I am looking for the configuration notes on setting up IDE from a ISU point of view. Also the notes on what is new on IDE. If there is anything on this I will appreciate emensly from anyone. thanks
-
Hi, i am working on MSS Travel Management Work Flow. The problem is when i wants to approve the Requests from MSS ( Portal ) it is giving me an error Saying 'Approve Failed ' & also all the activites i click it is giving ' XXX Failed ' . But the work
-
Hey guys, I've noticed that when I press the F1 or F2 key on my Macbook, the little brightness windoid thing pops up and the meter moves accordingly, but yet the screen does not dim nor brighten. I've made sure that the function keys work as function