After installing Lion, the Software Update "can't check for updates because of a network problem.But I've no network problem. My internet is working properly. could you help me?
After installing Lion the Software Update "can't check for updates because of a network problem". But I've no network problem. My internet is working properly. Could yoy help me?
Hi All
Same problem this morning but now resoloved.
Update require using the following url support.apple.com/kb/DL1437 update for lion 10.7.1
updates now work with this update
Hope this helps
Thanks
Similar Messages
-
Software Update can't check for updates (Lion)
Just downloaded and installed OSX 10.7. Tried to run Software Update and get the following alert:
'Software Update can't check for updates because of a network problem. The file “index-lion-snowleopard-leopard.merged-1.sucatalog” couldn’t be found on the server “swscan.apple.com”.'
Repaired permissions, created new user account... Issue persists. I'm connected to the internet. Software Update System Preference has no entries in the "Software Installed' tab.No I haven't tried to get the individually. I will just wait because I am not the only one in our household who's iTunes won't download app updates.
The Software Update error has also now changed to:
Software Update can't check for updates because of a network problem.
A network error has occurred. Check your Internet connection, and then try again.
as opposed to earlier when it read:
Software Update can't check for updates because of a network problem.
The file “index-lion-snowleopard-leopard.merged-1.sucatalog” couldn’t be found on the server “matsus2.matilda.net.au”.
So something has changed in the last few hours. Maybe it's not my computer and just something to do with the apple servers. The matsus2.matilda.net.au is the interesting thing as it has no relevance to our internet or home network. -
I just bought a MBP w/Lion (10.7.4) and ran software update. The first two items I updated were firmware for SMC (ver 1.5) and EFI (ver 2.7) and now my MBP says: "Software Update can't check for updates because of a network problem." However, I can connect to the Internet to surf the web just fine. This is the only update I've made. Can firmware be uninstalled? If I reverted to the image on my external drive that I did with CCC prior to the update, would that fix it?
Hi! i hope i'm able to explain what i worked out and what worked for me. I had the same message coming up "no internet connection, run network/internet diagnosis" etc etc. Internet connection was fine. What i finally did:
Open airport, check internet, internet options ; with me, IPv6 was set as this (the letters are in german order and not in a english order, sorry...):
In system prefs, network/TCP/IP IPv6 was set to "automatic":
I did change the settings in Airport back to "Link Local" and Software Update worked immediately normal whithout restarting the computer.
No idea what changed the settings; however i did run permission repairs beforehand with no connection to any problems, just as a normal kind of 'maintenance routine'.
Hope this helps others, it worked for me.
Cheers
Csico -
Software Update can't check for updates because of a network problem.
The software update app fails with following error msgs. But all network functions fine.
+A networking error has occurred: timed out (-1001). Make sure you can connect to the Internet, then try again.+
+Software Update can't check for updates because of a network problem.+
Deleted the software update plist files in $HOME/Library/Preferences, $HOME/Library/Preferences/ByHost, and HD/Library/Preferences, as per some posts. no effect. Problem persists.
Any Ideas?
ThanksSame here
The last update I managed to do without problems was +Java for Mac OS X 10.5 Update 5+ - since yesterday the update process has become much, much slower and when I try to install +Security Update 2009 005+ and +iTunes 9+, it fails, usually with the aforementioned error, but also sometimes with Error 400 or Error 600, IIRC. -
Software update can't check for updates because of a network problem mac
hi i am facing below probelm on my mac ... i have done all the ip setting on my mac Error is software update can't check for updates because of a network problem mac.Can any one please assit me...
Can Some solve my problem.....
-
"Software update can't check for updates because of a network problem" - help!
Recently, when I perform a software update check on the pulldown Apple menu, I get this error:
"Software update can't check for updates because of a network problem."
The only problem is that my network works just fine. I use the internet and get emails without any problem. But I can't figure how I can fix Software Update.
The only relevant updates have been for Glims and 1Password. Oh, and note the same problem trying to access the App Store; I just get a "Can't connect to the App Store" error.
Any hints?I have to solve all my own problems.
The problem was due to Little Snitch. Once I upgraded from 2.4.0 to 2.4.2, my system works swimmingly again.
FIXED! -
After installing Lion the microsoft office programs (word, excel,...) do not run! What can I do as I need them for external communication?
There are also free alternatives such as Neo Office.
You can also install the Office 2011 30 day trial if it's urgent. -
I use a two button mouse with my Mac Book Pro. It works fine, but after installing Lion, the mouse wheel goes in reverse of what it did (rolling the wheel towards your palm goes up not down the page). Anyone know how to fix this?
First sentence in OPs question:
I use a two button mouse with my Mac Book Pro
I guess the track pad settings would look similar to my screen shot?
Regards,
Colin R. -
I did an updated yesterday to the new IOS 7.0.4 on my 4s. Now my facebook app is really small when I open it. I tried to re install it a few times I also checked for updates to the app. Can't figure it out.
Close all open apps by double-tapping the home button, then swiping up and off the screen with the app window (not the smaller icon).
Reset your device: hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss) -
i wan't update using itunes, i want to make update using my phone, but when check for an update using software update in setting message appear " can't check for update....."?
Reboot the device and see if the error happens again. Updating through iTunes is usually optimal, but the file size differs via Software Update on the device and iTunes (50MB vs ~800MB)
-
When i try to open week cal it loads and then closes after a few seconds...I have checked for updates, turned the phone off then on, closed out of the app and then opened it again...nothing works! I have thought about deleting the app from my phone and then reloading it again but I worry that it will delete all my calendar info??? Any suggestions?
To reset, press and hold the Home and power buttons until the silver apple appears.
I would delete the app, reset the phone and then download the app again. Your calendar information should be stored on the phone as Week Cal uses the Calendar app information.
Best of luck. -
On the iTunes device menu, I check for updates for my iPod Touch Gen 2 and it says it's up to date at 4.2.1. How can I update it to a newer version?
If you have a 2nd generation iPod, it up to date.
1st Gen up to iOS 3.1.3
2nd Gen up to IOS 4.2.1
3rd Gen up to IOS 5.1.1
4th Gen up to IOS 6 -
(solved)-Windows update cannot currently check for updates, because the service is not running. You may need to restart your computer
Hetti Arachchige V Aravinda | Network Administrator (B.Sc, MCP, MCTS, MCSA, MCSE, MCITP, CCNA, CEH, MBCS)| http://www.windowstechinfo.com |Hi,
Glad to see your problem resolved, Hope your experience is helpful with others.
Roger Lu
TechNet Community Support -
Windows Update failed to check for updates with error 0x800B0001
Hi all,
I have a WSUS installed on a Windows Server 2008 R2 box, I have a new Windows Server 2012 box (joined to domain) that cannot get updates from the WSUS, whenever I try to search for new updates I receive the following error in event viewer:
Windows Update failed to check for updates with error 0x800B0001
Note: I cannot see the Win2K12 server in the WSUS console under computers node.I couldn't get it to run even after installing the mentioned KB fixes. So I investigated the error myself, and found a "hack" that seems to fix the issue. Wrote up a small piece on it here:
http://tplive.azurewebsites.net/2013/12/windows-update-error/
You and about a thousand other people have reported "I had already installed [the update], but installing it AGAIN fixed the problem.", which is almost assuredly a simple indication that the original installation of the update failed, and you simply did
not recognize that the installation of the update was not successful.
The fact that the /selfupdate folder was corrupted (read: missing files) pretty much says it all. There's no bug. Your installation of the update simply failed. (Or, the server wasn't healthy to begin with and you got what you got.)
Bottom line: The only known cause for a client-side 0x800B0001 error code is that the WSUS server has not been
properly and completely patched.
Lawrence Garvin, M.S., MCITP:EA, MCDBA, MCSA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2013)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence R Garvin
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds. -
Windows update cannot currently check for updates
dears
when I Try to update my windows 7 by clicking on windows update ( control panel or windows update) I get some notification saying
"windows update cannot currently check for updates because of the service is not running you may need to restart the computer"
I have tried with 2 solution in internet found but not successeded as below :
1) stop windows update service and rename " SoftwareDistribution" folder in order to be created later after restart aformentioned service" and some solution as for stop "Background Intelligent Transfer Service" before windows
update service even though didnt pass.
2) run windows update troubleshooter to idnetify the problems and fix the issue , it tells me its fixed but nothing there.
I need your support please if somebody encounter that to let me run my windows Update for more information its colored with red.
Ali HadaweHi ,
First of all ,I would you suggest to check the status of the "Windows update "services " and "Background Intelligent Transfer service".Run "Services.msc" to open the services manager.
Someone has tried the following methods to resolve the similar issue,please have a try :
1.go into Windows Update and change the settings to "Never check for updates (not recommended)", click OK, and then change it back to "Install updates automatically".
2.Turn on the Windows Defender and update it .
Here is a link for reference :
windows update cannot currently check for updates because the service is not running window 7 HELP(pay attention to Brook and Gab_Power`s answers)
https://social.technet.microsoft.com/Forums/en-US/ee85d867-ce2f-412f-8c03-f43ab92132cc/windows-update-cannot-currently-check-for-updates-because-the-service-is-not-running-window-7-help?forum=w7itproinstall
If the issue persists, please run the fix it tool in the following link to reset the windows update components to have a check .
How do I reset Windows Update components?
http://support.microsoft.com/kb/971058
Best regards
Maybe you are looking for
-
when I launch firefox get the following message "firefox is already running, but is not resonding. to open a new window, you must first close the existing firefox process, or restart your system" firefox not running and a restart doesn't solve the pr
-
Safari 6.0.1 keeps randomly crashing
Safari 6.0.1 keeps randomly crashing. I'm not exactly sure what triggers it. Sometimes it's when I navigate to a new page. Sometimes I'm not even touching my laptap, I'll walk away for a moment and I'll come back and safari has quit on me. Sometimes
-
IPod Classic having strange issues
My 80 Gig iPod Classic is having the following issues: 1.) It appears empty when I search for songs using the wheel. 2.) It shows on my desktop as "Unknown" and is ejectable when I drag it to the trash. 3.) When I put it into disk mode, clicking the
-
Too much time taken to go to sleep
hey there, i've got problem here which my macbook takes nearly one minute to go to sleep. it really wasted my time to for it to go to sleep. your reply is really appreciate. thank you, Arif [new to mac world]
-
Can someone please tell me what's wrong with the following two queries: I'm using Oracle 11.1g select row_number() over (partition by 'test' test order by 'test2' test2 rows between 3 preceding and cu