After installing Maverick on my Macbook it won't reboot
After installing Maverick on my Macbook it won't reboot. It fully downloaded and intalled fine and once it had finished intalling, a pop up message said that my macbook with restart in 10 seconds. i restarted my macbook but it never did anything more than have a grey screen with the apple symbol and a spinning wheel underneath that.
I have tried starting in safe mode (holding down shift), ive tried holding down command, option, R and P but that didnt work, I have tried holdig down command and R and that didnt work. Holding down option when turning on did work but when i go into disk utility and i try to verify and repair disk of my 250GB Toshiba MK2555GSXF Media i get a warning saying "Live File system repair is not supported"
Hi,
On the iOS devices remove the Apple ID.
Set the device in to Airplane Mode (this breaks with the server)
Start with the iPhone to add back the Apple ID - only after you see the iPhone Number is Verified.
The Restart the Mac Version
Accept the pops ups that state what the iPhone is using.
Do same on iPad.
8:31 pm Wednesday; April 2, 2014
iMac 2.5Ghz i5 2011 (Mavericks 10.9)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad
Similar Messages
-
After installing Maverick on my macbook pro, imessage on my ipad and Iphone stopped working properly.
What I get is a RED exclamation and "Not Delivered". It happens even if i resend it over and over.
I have made sure that the 3 devices all have the same settins in iMessage.
I have made sure to try doing it from the same network and from the cell provider network.
I have tried rebooting all three devices.
The only way to get it to work on my iphone and iPad is to dissable it in Mavericks on my MacBook Pro.
Is this a "feature" of the new OS?Hi,
On the iOS devices remove the Apple ID.
Set the device in to Airplane Mode (this breaks with the server)
Start with the iPhone to add back the Apple ID - only after you see the iPhone Number is Verified.
The Restart the Mac Version
Accept the pops ups that state what the iPhone is using.
Do same on iPad.
8:31 pm Wednesday; April 2, 2014
iMac 2.5Ghz i5 2011 (Mavericks 10.9)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad -
After installing mavericks on my macbook pro my laptop keeps rebooting
How can I find out what might be happening to cause this behaviour?
Is anyone else seeing this odd behaviour?
I didn't have a booting issue before installing Mavericks, since installing I have had at least 4 random reboots. After logging in, I get a message that the system booted unexpectedly and I uploaded the info to Apple. One time it showed the reboot occured during the wakup from sleep.
As a side question, how can I tell the system to NOT relaunch all applications that where running before.
Mike P.Hi Clinton (and original poster/responders)
I have been having the same problem, with random reboots after installing Mavericks. Sometimes, it goes into a loop of restarting for a while before successfully launching (even rebooting when I click on my user id to log in to OS) . Thanks, and,
Here are the results from using EtreCheck: (P.S.: I use an external usb harddrive for TimeMachine, and it hasn't been connected during these restarts)
Hardware Information:
MacBook Pro (15-inch, Mid 2010)
MacBook Pro - model: MacBookPro6,2
1 2.53 GHz Intel Core i5 CPU: 2 cores
8 GB RAM
Video Information:
Intel HD Graphics - VRAM: 288 MB
NVIDIA GeForce GT 330M - VRAM: 256 MB
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0
AirPlay: Version: 1.9
AppleAVBAudio: Version: 2.0.0
iSightAudio: Version: 7.7.3
Startup Items:
IcebergControlTower - Path: /Library/StartupItems/IcebergControlTower
System Software:
OS X 10.9 (13A603) - Uptime: 0 days 0:18:9
Disk Information:
Hitachi HTS545050B9SA02 disk0 : (500.11 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) /: 499.25 GB (316.19 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R UJ-898
USB Information:
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Internal Memory Card Reader
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Built-in iSight
Apple Computer, Inc. IR Receiver
FireWire Information:
Thunderbolt Information:
Kernel Extensions:
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
[loaded] com.adobe.fpsaud.plist
[loaded] com.google.keystone.daemon.plist
[loaded] com.p5sys.jumpdesktop.service.plist
Launch Agents:
[loaded] com.google.keystone.agent.plist
[loaded] com.lexmark.bmlaunchd.plist
[loaded] com.lexmark.lexnetlaunchd.plist
[loaded] com.p5sys.jumpdesktop.agent.plist
User Launch Agents:
[loaded] com.adobe.ARM.[...].plist
[loaded] com.divx.agent.postinstall.plist
User Login Items:
Jing
iTunesHelper
AdobeResourceSynchronizer
EvernoteHelper
Google Drive
LexmarkNetworkServices
3500-4500 Series Button Monitor
3rd Party Preference Panes:
BrowserPlus
DivX
Flash Player
Flip4Mac WMV
Perian
Internet Plug-ins:
AdobePDFViewer.plugin
AdobePDFViewerNPAPI.plugin
Default Browser.plugin
DivXBrowserPlugin.plugin
ebrary Reader.plugin
Flash Player.plugin
FlashPlayer-10.6.plugin
Flip4Mac WMV Plugin.plugin
Google Earth Web Plug-in.plugin
googletalkbrowserplugin.plugin
iPhotoPhotocast.plugin
JavaAppletPlugin.plugin
npgtpo3dautoplugin.plugin
o1dbrowserplugin.plugin
OfficeLiveBrowserPlugin.plugin
OVSHelper.plugin
QuickTime Plugin.plugin
Silverlight.plugin
Unity Web Player.plugin
User Internet Plug-ins:
BrowserPlus_2.9.8.plugin
Picasa.plugin
Bad Fonts:
None
Time Machine:
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 499.25 GB Disk used: 183.06 GB
Destinations:
Time Machine Backups [Local] (Last used)
Total size: 499.76 GB
Total number of backups: 8
Oldest backup: 2011-01-13 22:19:50 +0000
Last backup: 2013-10-23 18:27:47 +0000
Size of backup disk: Too small
Backup size 499.76 GB < (Disk used 183.06 GB X 3)
Top Processes by CPU:
2% WindowServer
1% EtreCheck
0% fontd
0% Google Drive
0% aosnotifyd
Top Processes by Memory:
115 MB Safari
98 MB com.apple.WebKit.WebContent
90 MB WindowServer
90 MB com.apple.IconServicesAgent
74 MB mds_stores
74 MB Google Drive
49 MB Dock
41 MB Jing
41 MB mds
25 MB com.apple.WebKit.Networking
Virtual Memory Statistics:
5.60 GB Free RAM
1.23 GB Active RAM
228 MB Inactive RAM
969 MB Wired RAM
376 MB Page-ins
0 B Page-outs -
Hi there
after installing Mavericks on my macbookpro 2009 (Japanese keyboards) the layout doesn't work anymore. I mean, if I press the "@" button the "è" symbol comes out. I did already change the layout in the Preferences but it didn't work.
Could anyone help me please?Apple has changed the way Kotoeri keyboard layouts work. You should be able to get normal behavior if you activate the US layout and switch to that just before using Kotoeri. Here is also an Apple note on the topic with another suggestion:
http://support.apple.com/kb/TS5284
Be sure to tell Apple you want this changed back to the way if was in 10.8 and earlier via
http://www.apple.com/feedback
If you know Japanese well, you might ask on the Japanese discussions whether someone has found a better fix for this:
https://discussionsjapan.apple.com -
After installing Mavericks OS, My MacBook Pro is Slow and weak?
Recently I upgraded to Mavericks OS system from Mountain Lion. I use MacBook Pro 17" of 2011 with 2.2 GHz Intel Core i7.
Mavericks supposed to be faster and saves more battery life. But it was not in my case. I do most of my work with Ms. Office 2011.
1) I find the Finder is extremely slow to respond. It takes more than One minute to open the folder files.
2) I find the Ms.Office is very slow. Powerpoint slides are NOT showing the content on the column view. The system battery goes down very quickly with Powerpoint.
3) The battery does NOT last more than 5 hours, comparatively it was usually be NINE HOURS.
I have reinstalled the Mavericks as advised by the Apple Expert from Apple Inc.
Still the Problem exist. What do I do?Fixing a Mavericks Installation Problem
How to manage a failed OS X Mavericks installation | MacFixIt - CNET Reviews.
Try these in order:
1. a. Resetting your Mac's PRAM and NVRAM
b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and
after the chime press and hold down the OPTION key until the boot manager screen appears.
Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless. -
Dock not working after installing maverick
After installing Maverick on my Macbook Pro, my dock which is positioned at the bottom now freezes. Prior to update, just placing my cursor at bottom of screen would bring up the dock. Now, it either doesn't come up or I have to place my cursor down there several times before it finally pops up. Anyone else experiencing this issue?
Revealing the Dock while in a full-screen app requires not only moving the cursor to the bottom of the screen, but keeping your finger on it or moving the cursor along the bottom edge (or other "tricks") to reveal the Dock.
SUPER ANNOYING TO ME
Many users may like that way of operation, perhaps a great majority. But hundreds of thousands may find it annoying to have this cognitive pause imposed and would rather have the dock appear accidently once in a while when moving the cursor close to the bottom area of the display.
This worked before Mavericks:
Setting the Dock autohide delay to zero (in Terminal, with write defaults...) removed this annoyance. As soon as your cursor's at the bottom of the screen, the Dock's there.
In Mavericks: Nothing to do! (so far)
APPLE: "You" make WRONG design decisions, "you" make professional users spend dozens of hours investigating how to tweak basic features behind the scenes. And THEN, "you" quietly invalidate those changes. Please, the best design decision that "you" could make is to give the user more choice. Please, give us a section in Preferences where these things may be changed. The religious dumbing down of the interface in favour of supposedly clean esthetics is plain WRONG.
It is also quite unacceptable that APPLE does read these pages but never responds. -
Printing does not work after installing Mavericks
I am unable to access printers after installing Mavericks on my macbook pro retina. Any suggestions?
This thread should help:
https://discussions.apple.com/message/19407500#19407500?ac_cid=tw123456#19407500 -
Hey everyone, I have some troubles making LAN servers on Call of Duty 4 and people can't join them after installing Mavericks on my Macbook Air. I need help!
Thx!Hi,
You don’t install VS2010 on the client PC, then where did the Form Invoice not work? When you run it from another version of VS? Or when you run the application with application.exe?
Based on your description, one form works well, another form does not. I assume that two forms are in two different projects, then please check the .Net Framework used by the two projects. If they are different, you can use the
one used by the Form contact for Form Invoice.
Because this issue is a project issue, I recommend you to consult it on some application forum such as Windows Forms General forum for better support.
VS General Question forum mainly discusses
the usage of Visual Studio IDE such as
WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help
System and Visual Studio Editor.
Thanks,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
MacBook Air won't restart after installing Mavericks
My MacBook Air (v Fall 2011) won't restart after installing Mavericks. I have done the instal several times, done the disk repair, I have had 2 visits to the local Apple store where they installed Mavericks with their software only to return home and have it fail again. Does anyone know of issues with the SSD or memory?
Next visit to the Apple store is Tuesday morning 12-17-13. Anywthing that can help us would be appreciated. Tks DavidOk. Nevermind. I guess I had to Force Quit/Relaunch Finder.
-
After instaling Mavericks, my Mac has slowed down so much, when I turn on my Mac it takes forever to load, and after it loaded, takes longer (then what it did before) to load any program.
Any help please?
My specs: MacBook PRO 13" late 2011, 4Gb RAM, Intel i7 2.8Ghz System most of the times shows 90-97% on idle (yet slow).Check activity monitor, if a keener activity is taking a lot of CPU resources then Try this link http://www.rdoxenham.com/?p=259
You will have to keep an eye on your temperature, but that's it. -
Has anyone noticed MacBook Air slowing down after installing Maverick
Has anyone noticed MacBook Air slowing down after installing Maverick?
Activity Monitor - Mavericks
Activity Monitor in Mavericks has significant changes
Performance Guide
Why is my computer slow
Why your Mac runs slower than it should
Slow Mac After Mavericks
Things you can do to resolve slowdowns see post by Kappy -
Are there Game Apps for MacBook Pro after installing Maverick
Are there any Game Apps for MacBook Pro after installing Maverick IOS? Any suggestions? Thank you.
The Game Center: http://support.apple.com/kb/HT4314
-
My macbook pro crashed after installing maverick. I lost all my photos however the iPhone iPhoto app still has these photos so how can i access the package contents to recover these photos?
We'll need to know more to beable to help. Do you want to try to restore your photos from your iPhone to your Mac, or try to recover the photos from the old iPhoto Library on your Mac?
What is the situation of your Mac now? In hat way did it crash? A hardware problem with the drive? Does the system not start properly? Does iPhoto not launch? Do you still have the iPhoto Library on your mac or a backup, so we could try to rescue the photos there?
What versions of iPhoto are on your iPhone and your Mac?
however the iPhone iPhoto app still has these photos so how can i access the package contents to recover these photos?
On the iPhone you cannot access the "package contents" - IOS hides the file system from the users. To restore photos from your phone share all iPhoto photos to your Camera Roll, that are not already in the Camera Roll, and then connect the iPhone via USB and import the Camera Roll to iPhoto or Image Capture. Or use any of the other sharing methods described on thos manual page: see: Ways to share photos http://help.apple.com/iphoto/iphone/2.0/?handbuch#blnk7d8f763e
To retrieve photos from a corruptrd iPhoto Library on your Mac we need to know the version number and more about the "crash" you experienced, the state of your mac, the system, the data. Please post back with more details.
-- Léonie -
Macbook pro running slowly after installing Maverick. Solutions?
macbook pro running slowly after installing Maverick. Solutions?
Hello art02,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
If your Mac runs slowly
http://support.apple.com/kb/PH10798
If you find your Mac is running slowly, there are a number of potential causes that you can check.
If none of these suggestions work, you may need to repair your computer’s disk in Disk Utility.Repair a disk
Best of luck,
Mario -
After installing Mavericks my MacBook Pro and my MacMini can't shut down, only a grey screen and finish. Must be killed by the power button. Why?
Nach der Installation von Mavericks kann ich weder das MacBook Pro (2 x 2.4 GHz) noch den MacMini (2 x 2.66 GHz) herunterfahren. Es bleibt ein dauerhafter grauer Bildschirm. Nach 20 min habe ich einen erzwungenen Neustart durchgeführt.
Ausserdem startet die Macs wesentlich langsamer als mit OS X 10.6.8.same here... sometimes it works, most of the time it doesn't!!
Maybe you are looking for
-
Using a shared library compiled in Linux (.so) on a windows platform
Hi, Can I interface a shared library compiled in Linux (.so) in LabView on a windows platform? Gabriel Y
-
File upload using http-post in OSB
Hi All, I am trying to upload a file using http-post method in OSB. I have created a business service pointing to the service url, with http method post. and calling this business service from a proxy service. I am unable to send the form data to the
-
Can't click out of a message box...help!
Hi. I'm on an iMac G4 intel duo, was working on an AW document when "the application unexpectedly quit". Upon relaunching, I got a little window that reads: Recovering file 'retail' (retail's the name of the file...) This file was not closed properly
-
I have a movie on my camcorder and i can get it to download into imovie. it shows up in DVD player. support had me download Mactheripper, i guess it ripper the video and automaticlly puts it in imovie. i can't figure out macthe ripper. i need help!!!
-
HT201209 What if I redeemed a certificate and don't see the amount in my account
What do I do if when I try to redeem a certificate it states that it's already redeemed but I can't find it in my account?