After installing "Maverick" update m Epson V300 scanner software does to work anymore. Epson does not seem to have a compatible driver
After installing "Maverick" update my Epson V300 scanner software does not work anymore. Epson does not seem to have a compatible driver (yet?).
It's not just scanners, my WACOM graphic tablet no longer works, am told by WACOM support that Maverick will not recognise it as it is too old!!! Worked perfectly with X 10.8 but not any longer - am well cheesed off as its going to cost me a few bob for a new WACOM!!! Thanks Apple
Similar Messages
-
After instaling the update for OS yesterday (saturday 7.10.2012) my macbook pro will not start. The instaling proses start but stopp after 2-3 minutes. I have started mayby 10 tims know but it stops every time. Help, its just a monts ago my iMac hard fail
Actually it sometimes gets a little further, the display will dim and the pointer will appear and then whoop it will turn off. if i do a verbose start up, it will finish all the steps, the white screen will appear and dim and then it will turn off.
-
I am now using v3.6.8 and tried updating to v7.01 but it does not seem to work. Went to control panel to remove all the old versions but Firefox was not listed there although Thunderbird is there. Please advise asap, thanks
I recommend backing up your Firefox settings in case something goes wrong during the uninstall/reinstall process. See [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
In the Control Panel, Add/Remove programs, look for '''Mozilla Firefox'''. Make sure to save (do not delete) your personal settings when uninstalling.
If it isn't there, just try installing 3.6.23, which is the latest in the 3.6 family. You can download 3.6.23 here: http://www.mozilla.com/firefox/all-older
With respect to version 7.0.1, are you saying that the installation failed, or it seemed to work but it's nowhere to be found? -
Won't restart after installing Mavericks update
i have a Mac Mini that's about 1.5 years old. I ran time machine and downloaded Maverick and installed it. It went to restart and never came back on. Any ideas?
Fixing a Mavericks Installation Problem
How to manage a failed OS X Mavericks installation | MacFixIt - CNET Reviews.
Try these in order:
1. a. Resetting your Mac's PRAM and NVRAM
b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and
after the chime press and hold down the OPTION key until the boot manager screen appears.
Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless. -
I re-installed itunes and by this i mean part by part itunes, quicktime and so on. Once I re-installed it looked like all was going well. I went to the store and upload like it use to before the upadtes. Than I pluged my Ipad2 no problem but I went to store once more the problem started agian the up-load was very slow it didn't up load completly. the nav bar on the store page is missing no apps, music, books,tabs are all gone. I think it has to do with the new itunes upates in the last few days. I also did the firewall and anti virus off step no fix and i'm running Norton 2011. Has itunes put any message on this ? Is it only window 7 64bit with the problem ? Oh one more thing I was getting a 3259 error but that looks like is good now, but it did take me a few days to download one book and one app the download is very slow.
Hi,
I am using a Nvidia 4200M adapter in my Laptop, Driver 266.96, Direct X 11
In my desktop I am using an ATI XFX 6950, latest revision drivers (I am not at home right now so I cant get that info).
The issue I did describe above, but it was a long explanation.
In some flash games the game files load initially and get as far as the "click to start" button. Then the flash area usually goes either all white or all black (usually depending on the falsh game default background color) and then it stays that color. Cant see anything after hitting start (usually most games have an intro video or animation before the game starts, but I cant see any of it.
For the very few games that do start, the flash game or application does not seem to work correctly in that when the rare game starts, it wont save any game files or save files to the pc and so if I exit the game (navigate away to another page or close browser) and then later come back, even though I click the option to save games (and ensure that the flash application slider shows it can save files and lots of space) it does not save and I have to start from the beginning all the time.
More explanation I gave above. -
After installing iOS5 on my iPhone 4 I am having a problem syncing Calendar, Contacts etc. If I say add something in Calendar on my iPhone it will not sync to my PC, even though is says it is. However if I add something to my Calendar on my PC (using Outlook) it will sync to my iPhone. Anyone having the same issues and/or solution?
Ok. I disabled hardware acceleration. The only extension is the McAfee Scriptscan for Firefox 15.1.0, which was already disabled. I then disabled all plugins (Acrobat, Google Update, Intel Identity Protection (2x), Java Deployment Toolkit, Java Platform, MS Office 2013, Quicktime, Shockwave, Silverlight), which were all up to date.
Normal or safe mode still has same result. No startup, no option button and no customize.
Thanks for your help. Got any other suggestions? -
Hp scanner software does not open after installing 10.4.8
Your help, please...since installing OS 10.4.8 my HP scanner software (5370c) does not open. It appears to begin opening and the icon appears briefly on the Dock, but does not stay there.
Also, the keyboard does not light up in low-light conditions as it did previously. Yes, I have the box checked in the keyboard section of system preferences. (It is a brand new keyboard, recently replaced, but the lighting worked under OS 10.3.9.
Any ideas?
Thanks for your help,
Deanyes, it seems to almost complete the installation and then tells me that I do not have the right permissions.
-
I am writing this using an external monitor in the office from my MacBookPro 8,1 (April 2011). After installing the upgrade the monitor worked fine. After shutting down the system and restarting it the next day the apple sign was shown for some seconds, then - I assume this was the time when the operating system was was finished loading, the screen went black and stayed that way.I the attached screen shot one can see that only one external monitor is identified (sorry for the german language). Anyone has any idea what to do except downgrading using time-machine? this is what I am about to do. thanks for any help or ideas!
The auto-conversion to core storage is not a bug anymore than the automatic drive encryption during the Setup Assistant unless you pay close attention. Apple is giving you the push into the future of OS X.
Furthermore, Apple does not really support Linux, ESP, or rEFInd. Windows is only supported via Boot Camp on a drive that has only one extant partition - OS X. The consequence of this is that Apple will not test this other configurations for any compatibility with OS X. We may not like that but it is what it is.
I am quite familiar with configuring multi-boot volumes like yours, so please don't call me a fanboy because I don't see things all your way. -
I am the Windows admin for a university department and install PCs with Firefox all the time. This problem does not happen with every PC I maintain, only a select few (different model laptops with Windows 8.1 and update 1.) Until today, it only happened with new user accounts (with admin rights) that I setup on the laptops for our staff. Today this happened with The Administrator account while setting up a new laptop. In all cases so far, I install Windows from a saved image that was created using sysprep.
I have tried the many suggestions of resetting Firefox, deleting the users Firefox profile, deleting the users Windows profile, uninstalling/reinstalling Firefox, uninstalling/reinstalling Firefox and the latest Java, but nothing helps. After uninstalling, I run an app to delete temp files and caches and will even manually remove registry keys HKLM\SOFTWARE\Mozilla and HKCU\SOFTWARE\Mozilla. Plus I reboot and make sure the install folder is deleted after uninstall.
Results are the same: after installing Firefox 31, the initial setup window for migrating IE and/or Chrome pops up and after clicking the Finish button, Firefox starts, but does not show the initial new user page, only a blank page. Clicking on the Options button (3 bars) does nothing. Right-clicking in the proper area, the popup menu appears so I can choose to Customize, but that only opens another tab with about:customize in the URL and the page is blank. From the right-click popup menu, I can enable the Menu Bar and get to Options from that.
My latest attempt has helped a little. I uninstalled Firefox 31, cleaned up, deleted user Firefox profile, rebooted and then installed Firefox 30. Inital startup runs, and tells me I'm not up to date, and the Options button works. But I still cannot customize.
I then upgraded to Firefox 31, but then it's back to no startup page, no options button and no customize. I can downgrade to 30 and get all but customize working again.
Only Addon is one for McAfee Scriptscan for Firefox 15.1.0, which just after installing is disabled.
Any help would be appreciated. Thank you.Ok. I disabled hardware acceleration. The only extension is the McAfee Scriptscan for Firefox 15.1.0, which was already disabled. I then disabled all plugins (Acrobat, Google Update, Intel Identity Protection (2x), Java Deployment Toolkit, Java Platform, MS Office 2013, Quicktime, Shockwave, Silverlight), which were all up to date.
Normal or safe mode still has same result. No startup, no option button and no customize.
Thanks for your help. Got any other suggestions? -
64-bit Win 7 SCANNER software does not install successfully for wired-networked HP Officejet L7750
My client has an Officejet L7750 on his network (in the same 192.168.111.nn subnet), and it functions OK as a printer. I downloaded and installed each of the three sets of L7750 software designated as working with 64-bit Windows:
HP Officejet Pro Basic Print and Scan Driver
HP Officejet Pro Full Feature Software and Driver
HP Officejet Basic Driver - IT Professional Use Only
The end-result is the same with each. The software runs for a time, finds the printer, continues the install, then runs for about 10 minutes "configuring the printer". After a time, it displays a dialog box saying that the installation failed. Sure enough, there is no software to run the scanner, but the printer still works. (I also ran the install a couple of times and the printer could not be found. When I continued installation anyway, the software left an icon on the desktop with some pretty unhelpful info for troubleshooting.)
After each failed install, I followed HP's documented procedure to remove the incomplete software.
My client needs to use the printer's scanning function, and occasionally send faxes, but cannot do so without a working L7750. Of course, Windows 7 cannot even recognize a networked scanner. Suggestions? Do I have to move the printer to the USB port on one of the computers to have a working scanning function? To do so would be mighty inconvenient, and essentially negate the networked capability of the printer. Can the L7750 operate simultaneously as both a netwkred device and a USB device on a computer?
Thank you. This one has me really stumped... BenHey @RobAhl,
Welcome to the HP Support Forums!
I understand that you're not able to scan properly with Windows 7 64 bit. As you already know, while the Windows scan and Fax program is handy for basic scans, it is not practical if you need to scan PDF Files. I would be more than happy to assist you with your issue; however, I'm going to need a bit more information first.
What colour Laserjet is this in regards to?
How is the Laserjet connected to your computer?
In the meantime, on the HP Support Website there are Full Feature Software and Driver downloads available. Should your Laserjet have Windows 7 64 bit support than you should be able to go to the HP website and download the appropriate drivers as they are required in order to have full scan functionality.
Drivers & Downloads
Please let me know what you find out. Best of luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping! -
Unable to remove malware on safari after installing maverick update
Apple Community:
Software Installation Steps:
1. Product: Java Standard Edition v.7.67 (Update Installed 08/16/14)
2. Product: Safari v.7.0.6 (Update Installed 08.16.14)
3. Product: CalmXav v.2.6.4 (Software Installed 08/17/14)
4. Product: OS X Maverick v. 10.9.4. (Update Installed 08.20.14)
On 08/16/14 I installed the Java Standard Edition to replace the Java Oracle Software. I requested software update for Safari and discovered the Safari Update and installed accordingly. Then, I recognized pop-up windows constantly opening with the advertisement to install MacKeeper. Apparently, my trial period had ended, thus requiring payment to execute a complete clean-up of macbook hard drive. Since then, I have downloaded CalmXav to remove any and all corrupted files, software, etc. Yet, I continually have multiple pop-up windows open when using Safari. I have gone to the Safari Preferences and changed privacy setting to block all cookies and other website data "from third parties" in addition to removing all websites and cleared the cache. However, upon restarting macbook, I find the settings in Safari Privacy reverted back to "never" block cookies and other website data. Can you please advise how to resolve this issue of what I believe to be "malware pop-up windows from occurring?"The Safari update was bogus. You may have installed the "DownLite" trojan, perhaps under a different name. Remove it as follows.
Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.vsearch.agent.plist
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "VSearch" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
/Library/LaunchDaemons/Jack.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/VSearch
/Library/PrivilegedHelperTools/Jack
/System/Library/Frameworks/VSearch.framework
~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot" or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
This trojan is distributed on illegal websites that traffic in pirated movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect much worse to happen in the future.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the DownLite developer has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight is inexcusable and has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return. -
I updated to Windows 8.1 from Windows 8. Now when I try to play high definition movies, iTunes says they can not play back on my display which is low def. My display has high resolution and display settings are correct. Other websites play back in high def. Just not iTunes.
Hi,
Try this command to fix your problem:
Windows App Store doesn't load after 8.1 Upgrade
http://blogs.technet.com/b/ouc1too/archive/2013/10/19/windows-app-store-doesn-t-load-after-8-1-upgrade.aspx
or, you can use WSreset.exe tool, or manually trying to clear the cache from the Windows\SoftwareDistribution\Download folder.
Alex Zhao
TechNet Community Support -
After installing Photoshop CS (version 8.0.1) activation does not work
Hi,
after installation i try to activate the product.
Following several phone numbers regarding activation at last i get redirected to this site.
Only activation also doesn't work, with a message containing information that the online activation server can not be reached (no error number)
i didn't use the product for quite a while.
It might be, that it was installed and activated on a machine that doesn't exist anymore.
Best regards,
SvenThe activation servers for all versions from CS2 and earlier have been decommissioned. They will not be back, ever. Your CS is of no use any longer.
However, Adobe has provided CS2 versions that you can download and do not require activation, just a special, generic registration code you can use for installing.
http://www.adobe.com/downloads/cs2_downloads/
Adobe has disabled the activation server for CS2 products, including Acrobat 7, because of a technical issue. These products were released more than seven years ago, do not run on many modern operating systems, and are no longer supported.
Adobe strongly advises against running unsupported and outdated software. The serial numbers below should only be used by customers who legitimately purchased CS2 [or earlier] or Acrobat 7 and need to maintain their current use of these products. -
Just installed Lion OS on my 2nd mac (on the 1st without an issue) but as I had a partition with windows 7 (installed with Snow Leopard bootcamp).
It seems that Lion OS renamed the Bootcamp partition but I am not able to rename it through OS.
Is there a solution for this or do I need to re-install?
Many thanks for your help
RuiHi Jack.........ok ive managed to create a link to that video on how to install bootcamp.....this is the tutorial i used and i managed to gain 100% completion on bootcamp 1st time no messing......like i said in my previous reply did you save the windows support files from apple....(Critical).....ok no point in messing about i suggest you start again from scratch........these are the things i used and YOU will need to complete bootcamp
mem stick or cd-r / dvd-r......original copy disc of win 7 ...i never used an iso i used original disc....allow a minimum of 30gb of space for your win 7 partition.....if you want bootcamp so you can use big programs like windows based games i.e.....Crysis/Call of duty etc etc ..then you will need to consider that you will need to allow a bigger partition to allow your HD to store the files.....this is the reason i installed bootcamp and so i made my partition i have a 750GB HD so i made a partition of 300gb for windows 7 and left the other 450gb for Mac....so you need to partition enough for what you want bootcamp for remember once you get bootcamp working you will need to install ALL Important Windows updates Including Win 7 SP1......once everything is installed you will have bootcamp up and running lovely.....u can then boot up with either win7 or mac......click this link and watch carefully and do exactly as shown ok and you should be fine...if you have any probs contact me again ok.....let me know how you get on ok..:)...http://www.youtube.com/watch?feature=fvwp&v=QFIWtXTl4d0&NR=1 -
I have an ipad and have just downloaded the lastest update, now I have a very very important spreadsheet that will not open!!!! other spreadsheets open fine but for some just this one will not open. I have rebooted the ipad and tried re-syncing but to no avail, can anyone HELP?????
I had the same problem. I created an iCloud account and backed up my iPad to iCloud. I then went to www.iCloud.com, signed-in and then I was able to download my spread sheet data. At least I have my data.
Maybe you are looking for
-
Airport is very sssssslllllllllloooooowwwwwwwww!!!!!
I have a 1ghz/512 eMac that I have an airport extreme card in, and it seems like sometimes my internet connection is extremely slow or un-responsive! It will sometimes work at normal speed, and sometimes it will completely freeze for a few minutes be
-
How to refresh materialized view by trigger
hi, im having a problem in refreshing materialized view through a trigger. CREATE OR REPLACE TRIGGER L_TRG_MARC_TEST BEFORE DELETE OR INSERT OR UPDATE ON MARC_BOOK_B_ENG BEGIN DBMS_MVIEW.REFRESH('TITLE_ENG_MV','C','',TRUE,FALSE,0,0,0,TRUE); END; Trig
-
Help with Script to change IP Address
Hello, So I am trying to generate three scripts for three different locations. These scripts need to just change the IP address for an application config file when clicked. How would I do this? Thanks,
-
Over the past few months I've been making the transition from Flash AS2 to Flex and am comfortable with combining AS3 and mxml, but the vast majority of my code is stored in functions within a <mx:Script> tag. Now comes the bigger question: When does
-
Hi there, I have a couple of questions regarding Reset-I and Reset-O messages on the Cisco ASA. I read a document that Reset-I will appear on the ASA if the inside host resets the connection, but what denotes an 'Inside' host? Is the inside host d