After installing Mavericks my Time Capsule gives me this error... The backup disk image "/Volumes/*.sparsebundle" is already in use.

can't say much more than the above other than I can't access any previous backups and it won't backup the current information.  Any solution would be appreciated. Thanks

The down and dirty solution......
Make sure that no other Macs are backing up at the time
Pull the power cord from the back of the Time Capsule
Count to ten
Plug the power cord back into the back of the Time Capsule
Wait a few minutes and try another backup.
A bit more elegant solution......
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the Time Capsule icon, then click Edit
Click the Base Station menu at the uppermost top of the screen where the Help, File, Window, etc menus appear
Click Restart
Wait a few minutes and try another backup

Similar Messages

  • HT3275 My time capsule reports an error The backup disk image "/Volumes/Data-1/MacBook Pro.sparsebundle" is already in use.

    Help !
    The last few days my time capsule reports an error       The backup disk image “/Volumes/Data-1/MacBook Pro.sparsebundle” is already in use.
    To make things worse I seem to be loosing my screen so need to make a back up ASAP

    Make sure that no other Macs are backing up at the time.
    Pull the power cord from the back of the Time Capsule
    Count to ten
    Plug the power cord back into the back of the Time Capsule
    This will fix the issue about 98% of the time. If you are in the unlucky 2% category, please post back for more assistance

  • Purchased a new Macbook Pro 13". I used migration assistant to transfer. I can't backup to time capsule.  I am getting on error The backup disk image "/Volumes/Herb's Time Capsul/Herb MacBook Pro.sparsebundle" could not be created (error 17).  Help

    Purchased a new Macbook Pro 13". I used migration assistant to transfer. I can't backup to time capsule.  I am getting on error "The backup disk image “/Volumes/Herb's Time Capsul/Herb MacBook Pro.sparsebundle” could not be created (error 17).  Help!

    Launch the Keychain Access application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Keychain Access in the page that opens.
    Select the System keychain in the list of keychains in the sidebar of the window. If you don't see the list, click the down-arrow icon below the sidebar.
    Then select Passwords in the Category list at lower left. Click the Kind heading in the list of keychain items to arrange it by Kind.
    Locate the AirPort Disk Password with the name of your Time Capsule. Double-click the item and check the box marked Show Password in the inspector window that opens. You'll be prompted for the administrator login password. Make a note of the AirPort password, then close the inspector window and delete the item.
    Also delete any other AirPort DIsk Password items for that same Time Capsule, which may have had a different name in the past.
    Quit Keychain Access and try again to back up.

  • I keep getting this message: The backup disk image "/Volumes/Time Capsule/Coyner's iMac.sparsebundle" is already in use.  What should I do?  Tom Coyner

    I keep getting this message: The backup disk image “/Volumes/Time Capsule/Coyner’s iMac.sparsebundle” is already in use.  What should I do? 
    SeoulTom (Coyner)

    Make sure that no other Macs are backing up at the time
    Pull the power cord from the back of the Time Capsule
    Count to ten
    Plug the power cord back into the Time Capsule
    Wait a few minutes, then try a backup again
    Check to make sure that you are running firmware 7.6.4 on the Time Capsule

  • HT3275 TIME MACHINE ERROR: The backup disk image "/Volumes/Data/Sean McGuire's MacBook Pro.sparsebundle" could not be created (error 1).

    I can select a disk (Time Capsule) and initiate the backup.  It only "waits to back up" then "making backup disk available" and remains frozen there.  I tried to update the software a while back and was unsuccessful, I think that may be the issue.
    Any insight would be greatly appreciated.  This is the error message I receive.
    TIME MACHINE ERROR: The backup disk image “/Volumes/Data/Sean McGuire’s MacBook Pro.sparsebundle” could not be created (error 1).
    Thanks

    See #C17 in Pondini's excellent support document Time Machine - Troubleshooting
    http://pondini.org/TM/Troubleshooting.html

  • Time Machine Backup error - The backup disk image "/Volumes/Data/Extreme.sparsebundle" could not be accessed (error -1).

    I am getting a Time Machine backup error "The backup disk image “/Volumes/Data/Extreme.sparsebundle” could not be accessed (error -1)."
    Then a Finder window pops up with the backup directory in it.  When I open it I see all the backups that were completed successfully and then the one there is simply always shows the data and .inProgress.  I thought that maybe if I could delete the one that is perpetually in progress it would start a new one and run fine, but I won't let me delete it.

    Reboot the TC.. or go to the 5.6 utility.. and disconnect all users.. to force it to reconnect.
    C17 in troubleshooting.. to give more specifics to Kappy's comment.
    http://pondini.org/TM/Troubleshooting.html

  • HT3275 Time Machine Error: The backup disk image "Volumes/Data/My Macbook Pro.sparsebundle" is already in use. (How do I correct this issue?)

    Time Machine did not back up:
    Time Machine Error; ("The backup disk image "/Volumes/Data/My MacBook Pro.sparsebundle" is already in use.")
    How do I correct this issue?
    Thanks!

    You need to be careful Bob.. people might take this literally.
    Bob Timmons wrote:
    How do I correct this issue?
    Call the exterminator to get rid of the bugs in Lion and Mountain Lion.
    https://discussions.apple.com/thread/5222487?tstart=0

  • I am running 10.7.5 and getting Time Machine error The backup disk image "/Volumes/Data/Kathy P's MacBook.sparsebundle" is already in use. what do i do now?

    i am running 10.7.5 on an older MacBook and getting Time Machine error The backup disk image “/Volumes/Data/Kathy P’s MacBook.sparsebundle” is already in use. what do i do now?

    See Pondini's TM FAQs, for starters.

  • Time Capsule ERROR: The backup disk image "/Volumes/Data/Boyan's MacBookPro.sparsebundle" is already in use.

    Hello All,
    my time capsule was working fine for about 1/2 year.
    Today I got this messege on my screen: The backup disk image “/Volumes/Data/Boyan's MacBookPro.sparsebundle” is already in use.
    Can anybody help???
    Thank You in Advance.

    Very common.. wonder it has taken 6months to arrive.. it will now be weekly at least if not daily.. strange bug behaviour.
    See more like this on the right.
    C12
    http://pondini.org/TM/Troubleshooting.html
    Just reboot everything is usually enough.

  • Time Machine error: The backup disk image "/Volumes/----/----MacBook Pro.sparsebundle" is already in use and resource unavailable?

    I have a MacBook Pro 13" 2010 model running Mountain Lion. I have always been able to use Time Machine with my Time Capsule. Just today I have been receiving the same error message whenever I would back up my computer:
    I removed my name before "MacBook Pro". It takes a long time "Looking for backup disk..." first. The disk I put with the time capsule is called Huge Backup, and in Huge Backup there is my sparsebundle file called "----- MacBook Pro." When I open Finder, open my time capsule, and then open my sparse folder, it should mount a drive where I can see my computer's backups. That doesn't work. Then I get this message:
    I once again removed my name before "MacBook Pro" but I can open my sister's sparsebundle who is running Mountain Lion on the same network and her backups work fine. I have researched this topic and have tried to repair the disk in Disk Utility, remount all the drives, remove the drive and restart the backups, and even restart my computer and the Time Capsule. Nothing worked. It just was working yesterday, but now I get this in the settings along with a caution symbol in my menubar:
    Is there anything I could do to fix this? Reconnecting it in AirPort Utility (5 or 6) didn't work. Also, for some reason, the error renamed Huge Backup to Huge Backup-1 as you can see above and below in the messages. I downloaded the Time Machine Buddy widget and this is the error report I got. I replaced my names or private info with [-----]. By the way, the network is called NDR Network, and the Time Capsule is alled NDR Time Capsule. Here's the error I keep getting:
    Starting manual backup
    Attempting to mount network destination URL: afp://[-----];AUTH=SRP@NDR%20Time%20Capsule._afpovertcp._tcp.local/Huge%20Backu p
    Mounted network destination at mount point: /Volumes/Huge Backup using URL: afp://[-----];AUTH=SRP@NDR%20Time%20Capsule._afpovertcp._tcp.local/Huge%20Backu p
    Disk image already attached: /Volumes/Huge Backup/[-----]'s MacBook Pro.sparsebundle, DIHLDiskImageAttach returned: 35
    Failed to mount disk image: Error Domain=com.apple.backupd.ErrorDomain Code=31 "The operation couldn’t be completed. (com.apple.backupd.ErrorDomain error 31.)" UserInfo=0x7ff0a483e6c0 {MessageParameters=(
    Ejected Time Machine network volume.
    Waiting 60 seconds and trying again.
    Attempting to mount network destination URL: afp://[-----];AUTH=SRP@NDR%20Time%20Capsule._afpovertcp._tcp.local/Huge%20Backu p
    Mounted network destination at mount point: /Volumes/Huge Backup using URL: afp://Rohan;AUTH=SRP@NDR%20Time%20Capsule._afpovertcp._tcp.local/Huge%20Backup
    Disk image already attached: /Volumes/Huge Backup/Rohan's MacBook Pro.sparsebundle, DIHLDiskImageAttach returned: 35
    Failed to mount disk image: Error Domain=com.apple.backupd.ErrorDomain Code=31 "The operation couldn’t be completed. (com.apple.backupd.ErrorDomain error 31.)" UserInfo=0x7ff0a343d430 {MessageParameters=(
    Ejected Time Machine network volume.
    Waiting 60 seconds and trying again.
    Attempting to mount network destination URL: afp://Rohan;AUTH=SRP@NDR%20Time%20Capsule._afpovertcp._tcp.local/Huge%20Backup
    Mounted network destination at mount point: /Volumes/Huge Backup-1 using URL: afp://Rohan;AUTH=SRP@NDR%20Time%20Capsule._afpovertcp._tcp.local/Huge%20Backup
    Disk image already attached: /Volumes/Huge Backup-1/Rohan's MacBook Pro.sparsebundle, DIHLDiskImageAttach returned: 35
    Failed to mount disk image: Error Domain=com.apple.backupd.ErrorDomain Code=31 "The operation couldn’t be completed. (com.apple.backupd.ErrorDomain error 31.)" UserInfo=0x7ff0a34410c0 {MessageParameters=(
    Ejected Time Machine network volume.
    Giving up after 3 retries.
    Backup failed with error: 31
    [SnapshotUtilities mountPointForVolumeRef] FSGetVolumeInfo returned: -35
    Failed to eject volume (null) (FSVolumeRefNum: 0; status: -35; dissenting pid: -1)
    Failed to eject Time Machine disk image: /Volumes/Huge Backup-1/Rohan's MacBook Pro.sparsebundle
    Please help!

    I didn't remove all of my names, so just ignore that...

  • HT3275 Time Capsule error message: "Time machine error-The backup disk image /Volumes/Data/Zeb's MacBook Pro.sparsebundle could not be accessed (error -1)".

    Please help! Got myself a timecapsule a few months back. I just use it to back up my mac, and also have a wireless printer connected. I have a Macbook Pro (Mac OS X 10.7.3). When I first got my Time Capsule it backed up flawlessly, but in the last few months has started showing the message above. So now it wont back up at all.
    Have done probably 2 system updates during this time, and even a firmware update a few days ago for the timecapsule. This recent firmware update seem to fix it for a day, but now the problem is back!!! Even Mac support wasnt able to help last time I called.
    HELP HELP HELP!!!
    Cheers

    See #C17 in Time Machine - Troubleshooting

  • Time Machine gives error "The backup disk image '/Volumes/time capsule name/Macbook Pro.sparsebundle' could not be accessed (error -1)."

    The backup disk image ... could not be accessed (error -1).

    Thanks to the great Pondini...
    http://pondini.org/TM/C17.html

  • HT3275 I get this error Time Machine attempts a backup. The backup disk image "/Volumes/Data/Barbara's MacBook Pro.sparsebundle" is already in use."  Can anyone assist me in correcting the problem causing this?  Thanks.

    Time Machine fails with this error: "The backup disk image “/Volumes/Data/Barbara’s MacBook Pro.sparsebundle” is already in use." 
    Can anyone assist me in correcting the problem causing this?  Thanks.

    Reboot the TC.. Sometimes you need to reboot the whole network.
    This is what comes of Lion and then made worse in Mountain Lion of Apple not spending enough time to fix the bugs.
    Read C12 in pondini.
    http://pondini.org/TM/Troubleshooting.html
    C17 can be related I think.

  • HT3275 The backup disk image "/Volumes/terry bostock's Time Capsul/terry bostock's iMac.sparsebundle" is already in use.

    I,m getting this message, The backup disk image “/Volumes/terry bostock's Time Capsul/terry bostock’s iMac.sparsebundle” is already in use. What does this mean. I've upgraded to Mountain Lion, but it was ok till recently.

    A constant bug in Mountain Lion.
    Usually, simply powering off the Time Capsule, waiting a few minutes, and starting it back up will reset the network connection.
    Give that a try first.

  • Time Capsule Help: The backup disk image "XYZ.sparsebundle" could not be accessed (error -1).

    My time capsule hasn't been working for months now. Finally got around to looking into the problem. Have tried looking on forums -- most solutions point to Pondini.org. I've tried #17, which is related to my specific error with no avail (including using Airport Utility 5.6 to disconnect all users).
    I have also tried moving (instead of deleting) my old sparsebundle into a temporary folder on the Time Capsule to "hide it" to attempt to create a new sparsebundle: while I have managed to get Time Machine to create a new one (albeit after many, many attempts), once it creates a new one, it doesn't seem to say that anything has been backed-up AND it cannot seem to access the "new" sparsebundle, giving me the error: "The backup disk image “XYZ.sparsebundle” could not be accessed (error -1)."
    Thoughts?

    Try Here  >  http://pondini.org/TM/C12.html
    More Info here  >  http://pondini.org/TM/Time_Capsule.html

Maybe you are looking for

  • Flattened PDF Form and Barcode not displaying

    I see there are a lot of discussions that are not answered in this forum, so I am guessing this will go unanswered as well.  But I am looking for a solution for the issue in the subject. I have a simple PDF form built in LiveCycle that I am populatin

  • Need help with images in browser!

    Hey all, So I'm building my very first website, and I've reached my first roadblock. I'm trying to set up a grid of images, and most (7 out of 9) of the images appear in my browser when I preview in Safari and Firefox (haven't tested any others). The

  • How to discard non alphanumeric key in a string ?

    Dear all, To start an application  that i have developped, i would like that the user write its password in the first panel but i want that each time that user enter a character in the string control Hide_Password (see attached picture), this one is

  • My mousepad suddenly quit working

    My mouse pad quit working suddenly. It appears to be mechanically, as in the pad doesn;t seem to be going down to select. Any way to repair or free it up?

  • Itunes will not show individual songs

    When I go on itunes, the individual songs will not display to be purchased. Suggestions?