After installing Mavericks wifi won't see my network (WPA2 Personal)

Installed mavericks on my MacPro and wifi was spotty for the first day or two and wouldn't automatically select my wifi network after sleep. So I deleted my network name from the wifi list and since then it won't see it at all. Even if i type in the name manually it says no networks found. Tried repairing permissions and restarting that didn't help either.
Any suggestions?

Anything further I can do before taking the hammer to my iPad 2 3g+Wi-fi?
Plenty.
Am I correct in thinking that you can only setup 3g connection if you already have wifi connection?
Incorrect.
It would appear to me that this device is about as useful as a brick, no?
It has not been useful for the last 4 months?
Do you connect your iPad with any other wi-fi network besides your own?
If so, do you have the same problem with any other wi-fi network your iPad has access to?
If you connect your iPad with any other wi-fi network besides your own and the problem is with your wi-fi network only, this leans toward there being a problem with your wi-fi network regardless how many computers or other devices don't have any problem connecting with your network.
What troubleshooting steps have you tried with your wireless network and router if any to rule out a potential problem there?
http://support.apple.com/kb/ts1398

Similar Messages

How do I fix my gmail after installing mavericks - it won't allow me to move emails to folders it just moves them back to the inbox?

I upgraded to Mavericks. Now my gmail accounts won't work properly - I can move emails out my inbox into the various folders I use to file them. Can anyone help?

That is correct... I know the Admin password but the password for my keychain is not correct and I can't seem to remember what the last password would have been. Any ideas how to reset it? Maybe delete and recreate? I know I may lose some info. Thanks!

Mac App Store fails after installing Mavericks.

After installing Mavericks i can't see updates in Mac App Store. Also Maps App only shows a plain colour.
Any idea to fix this problem?
Sorry for my bad english!
Message was edited by: Flacote
Everithing works fine after a several system reboots.

After installing Mavericks i can't see updates in Mac App Store. Also Maps App only shows a plain colour.
Any idea to fix this problem?
Sorry for my bad english!
Message was edited by: Flacote
Everithing works fine after a several system reboots.

After installing Maverick on my Macbook it won't reboot

After installing Maverick on my Macbook it won't reboot. It fully downloaded and intalled fine and once it had finished intalling, a pop up message said that my macbook with restart in 10 seconds. i restarted my macbook but it never did anything more than have a grey screen with the apple symbol and a spinning wheel underneath that.
I have tried starting in safe mode (holding down shift), ive tried holding down command, option, R and P but that didnt work, I have tried holdig down command and R and that didnt work. Holding down option when turning on did work but when i go into disk utility and i try to verify and repair disk of my 250GB Toshiba MK2555GSXF Media i get a warning saying "Live File system repair is not supported"

Hi,
On the iOS devices remove the Apple ID.
Set the device in to Airplane Mode (this breaks with the server)
Start with the iPhone to add back the Apple ID - only after you see the iPhone Number is Verified.
The Restart the Mac Version
Accept the pops ups that state what the iPhone is using.
Do same on iPad.
8:31 pm Wednesday; April 2, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

After installing Maverick my computer, when restarted, only a gray screen appeared. My computer won't work at all...what happened?

After installing Maverick my computer shut down and when it restarted I couldn't get to the home screen. The monitor was grey with some dark grey shapes, it sounded like it was constantly running a program. My computer is sick!! HELP

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use either of the techniques in Steps 1b and 1c to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 10. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 10
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 11
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 12
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

After installing mavericks time machine no longer visible in finder. how can I get back to see it?

after installing mavericks i found my time machine disk is no longer visible in finder. Has someone else suffered same? thanks

Click on the Desktop. Select Preferences from the Finder menu. Check the General and Sidebar toolbar items. See that the appropriate boxes are checked.

MacBook Air won't restart after installing Mavericks

My MacBook Air (v Fall 2011) won't restart after installing Mavericks. I have done the instal several times, done the disk repair, I have had 2 visits to the local Apple store where they installed Mavericks with their software only to return home and have it fail again. Does anyone know of issues with the SSD or memory?
Next visit to the Apple store is Tuesday morning 12-17-13. Anywthing that can help us would be appreciated. Tks David

Ok. Nevermind. I guess I had to Force Quit/Relaunch Finder.

Has anyone else experienced WiFi issues after installing Mavericks?

I recently installed Mavericks on my 2009 iMac. After the initial install, everything worked beautifully. After my first reboot, however, the network is having trouble staying connected to the wireless network. I verified the modem/roouter were working by testing on my other wifi enable devices (iPhone, iPad, Apple TV, etc).
My question really, if whether or not anyone else has experienced this after installing Mavericks official release and is this a known issue that I cannot seem to locate information on.
It should be noted that I often use a VPN service called Private Internet Access. And thought I havent had issues with this before any reboot, I thought it would be worth mentioning.
Thank to anyone's help in advance.

I've also been having a lot of issues with my wireless after I updated to Mavericks. For me, the problem is manifest whenever I'm using my system in a conference room with a lot of other folks who are also using wireless. The connection is up and down constantly, to the point where it's really not usable. Other folks in the room (who are using Windows systems) don't have the same issues. It's gotten to the point where _they_ are making fun of my me and my Mac (the tables have turned!).
I never had these issues when I was using Mountain Lion. Since it's the same environment and the same hardware (MacBook Pro, 15", Retina), I've started to suspect that Mavericks is the culprit.

Apple Mail Not Showing Inbox Unread Count on Dock after installing Mavericks

After installing Mavericks, my Apple Mail (connected to my work's Gmail account) stopped showing the Inbox's unread count on the dock. I switched it to "all mailboxes" to see if that would make a difference, and the dock shows 7 unread emails when there are actually none. When I switch it back to "Inbox" unread counts, it shows nothing. I've waited 15 minutes after receiving an email to see if it will show an unread message in the dock, but it does not. Does anyone have a fix for this?
Thank you!

Quit your mail entirely, then in terminal do:
mv ~/Library/Mail/V2/MailData/Envelope* ~/Desktop
This moves all your "Envelope Index*" files to your desktop. An alternative is deleting the files, but this allows you to keep them as a temporary back-up (you can delete them at-will later). Also, you can move the files from Finder instead of Terminal, if you prefer.
After the files have been moved, re-open Mail
This should re-load all your email messages, updating/restoring the count
While this works, it does not explain the reason the count goes missing, nor does it ensure that the count won't go missing again in the future, but at least it's a temporary workaround.

After installing Mavericks, my computer is slow/not responding

After installing Mavericks, my computer is not responding and reacting as quickly as (I think) it should. Here are the EtreCheck results. Any help would be much appreciated. Thanks in advance!
Hardware Information:
          iMac (27-inch, Mid 2010)
          iMac - model: iMac11,3
          1 2.93 GHz Intel Core i7 CPU: 4 cores
          16 GB RAM
Video Information:
          ATI Radeon HD 5750 - VRAM: 1024 MB
System Software:
          OS X 10.9.1 (13B42) - Uptime: 0 days 9:55:48
Disk Information:
          Hitachi HDS722020ALA330 disk0 : (2 TB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    Macintosh HD (disk0s2) /: 2 TB (1.25 TB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
          HL-DT-STDVDRW GA32N
USB Information:
          Apple, Inc. Keyboard Hub
                    Apple, Inc Apple Keyboard
          Apple Inc. Built-in iSight
          Apple Computer, Inc. IR Receiver
          Apple Inc. BRCM2046 Hub
                    Apple Inc. Bluetooth USB Host Controller
          Apple Internal Memory Card Reader
FireWire Information:
          WD My Book 111D 800mbit - 800mbit max
                    disk1s1 (disk1s1) <not mounted>: 32 KB
                    My Book (disk1s3) /Volumes/My Book: 1 TB (30.96 GB free)
Thunderbolt Information:
Kernel Extensions:
          com.kaspersky.kext.klif          (3.0.2d39)
          com.kaspersky.nke          (1.0.2d43)
          com.kaspersky.kext.kimul.44          (44)
Startup Items:
          FanControlDaemon: Path: /Library/StartupItems/FanControlDaemon
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
          [loaded] com.adobe.fpsaud.plist 3rd-Party support link
          [loaded] com.adobe.SwitchBoard.plist 3rd-Party support link
          [loaded] com.kaspersky.kav.plist 3rd-Party support link
          [loaded] com.microsoft.office.licensing.helper.plist 3rd-Party support link
          [invalid] com.oracle.java.Helper-Tool.plist
Launch Agents:
          [not loaded] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
          [loaded] com.adobe.CS5ServiceManager.plist 3rd-Party support link
          [loaded] com.divx.dms.agent.plist 3rd-Party support link
          [loaded] com.divx.update.agent.plist 3rd-Party support link
          [loaded] com.kaspersky.kav.gui.plist 3rd-Party support link
          [invalid] com.oracle.java.Java-Updater.plist
User Launch Agents:
          [loaded] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
          [loaded] com.adobe.ARM.[...].plist 3rd-Party support link
          [loaded] com.adobe.ARM.[...].plist 3rd-Party support link
          [loaded] com.facebook.videochat.[redacted].plist 3rd-Party support link
          [loaded] com.google.keystone.agent.plist 3rd-Party support link
User Login Items:
          Scroll Reverser
          Scroll Reverser
          iTunesHelper
          EEventManager
          Dropbox
          AdobeResourceSynchronizer
          EEventManager
          ConnectService
Internet Plug-ins:
          Google Earth Web Plug-in: Version: 6.0 3rd-Party support link
          Default Browser: Version: 537 - SDK 10.9
          OVSHelper: Version: 1.1 3rd-Party support link
          NP_2020Player_WEB: Version: 5.0.94.0 - SDK 10.6 3rd-Party support link
          RealPlayer Plugin: Version: (null) 3rd-Party support link
          AdobePDFViewerNPAPI: Version: 11.0.02 - SDK 10.6 3rd-Party support link
          FlashPlayer-10.6: Version: 11.9.900.170 - SDK 10.6 3rd-Party support link
          Flash Player: Version: 11.9.900.170 - SDK 10.6 3rd-Party support link
          QuickTime Plugin: Version: 7.7.3
          iPhotoPhotocast: Version: 7.0 - SDK 10.8
          NP_2020Player_IKEA: Version: 5.0.94.1 - SDK 10.6 3rd-Party support link
          AdobePDFViewer: Version: 9.5.5 3rd-Party support link
          SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6 3rd-Party support link
          JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Outdated! Update
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
          AirPlay: Version: 1.9 - SDK 10.9
          AppleAVBAudio: Version: 2.0.0 - SDK 10.9
          iSightAudio: Version: 7.7.3 - SDK 10.9
User Internet Plug-ins:
          Unity Web Player: Version: UnityPlayer version 2.6.1f3 3rd-Party support link
3rd Party Preference Panes:
          Fan Control 3rd-Party support link
          Flash Player 3rd-Party support link
          Perian 3rd-Party support link
Bad Fonts:
          None
Old Applications:
          /Library/Application Support/Microsoft/MERP2.0
                    Microsoft Error Reporting:          Version: 2.2.9 - SDK 10.4 3rd-Party support link
                    Microsoft Ship Asserts:          Version: 1.1.4 - SDK 10.4 3rd-Party support link
          Solver:          Version: 1.0 - SDK 10.5 3rd-Party support link
                    /Applications/Microsoft Office 2011/Office/Add-Ins/Solver.app
          /Library/Application Support/DivX
                    DivXUpdate:          Version: 1.0 - SDK 10.5 3rd-Party support link
                    DivXMediaServer:          Version: 10.0 - SDK 10.5 3rd-Party support link
                    DivXTransferWizard:          Version: 10.0.0 (Build 10.0.1.41) - SDK 10.5 3rd-Party support link
                    DMSLaunch:          Version: 1.0 - SDK 10.5 3rd-Party support link
          SketchUp:          Version: 8.0 - SDK 10.5 3rd-Party support link
                    /Applications/Google SketchUp 8/SketchUp.app
          /Applications/Microsoft Office 2011/Office
                    Microsoft Graph:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Database Utility:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Office Reminders:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Upload Center:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    My Day:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    SyncServicesAgent:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Open XML for Excel:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Alerts Daemon:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Database Daemon:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Chart Converter:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Clip Gallery:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
          /Applications/Microsoft Office 2011
                    Microsoft PowerPoint:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Excel:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Outlook:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Word:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Document Connection:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
          Microsoft Language Register:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    /Applications/Microsoft Office 2011/Additional Tools/Microsoft Language Register/Microsoft Language Register.app
          Wondershare Helper Compact:          Version: 2.2.3.1 - SDK 10.5 3rd-Party support link
                    /Users/christophermcgreger/Library/Application Support/Helper/Wondershare Helper Compact.app
          Microsoft AutoUpdate:          Version: 2.3.6 - SDK 10.4 3rd-Party support link
                    /Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
          FacebookVideoCalling:          Version: 1.2.0.157 - SDK 10.5 3rd-Party support link
                    /Users/christophermcgreger/Library/Application Support/Facebook/video/1.2.0.158/FacebookVideoCalling.app
          Wondershare AllMyTube:          Version: 3.2.4 - SDK 10.5 3rd-Party support link
                    /Applications/Wondershare AllMyTube/Wondershare AllMyTube.app
Time Machine:
          Skip System Files: NO
          Mobile backups: OFF
          Auto backup: YES
          Volumes being backed up:
                    Macintosh HD: Disk size: 2 Disk used: 696.37 GB
          Destinations:
                    My Book [Local]
                    Total size: 931.36 GB
                    Total number of backups: 51
                    Oldest backup: 2013-07-17 12:40:03 +0000
                    Last backup: 2014-01-05 23:55:06 +0000
                    Size of backup disk: Too small
                              Backup size 931.36 GB < (Disk used 696.37 GB X 3)
                    Data [Network] (Last used)
                    Total size: 3
                    Total number of backups: 53
                    Oldest backup: 2013-07-16 22:38:22 +0000
                    Last backup: 2014-01-05 22:50:13 +0000
                    Size of backup disk: Adequate
                              Backup size 3 > (Disk used 696.37 GB X 3)
          Time Machine details may not be accurate.
          All volumes being backed up may not be listed.
Top Processes by CPU:
              11%          mds
               3%          WindowServer
               2%          diskimages-helper
               1%          EtreCheck
               1%          kav
Top Processes by Memory:
          524 MB          mds_stores
          360 MB          kav
          246 MB          com.apple.IconServicesAgent
          213 MB          com.apple.MediaLibraryService
          164 MB          Finder
Virtual Memory Information:
          10.45 GB          Free RAM
          3.44 GB          Active RAM
          851 MB          Inactive RAM
          1.27 GB          Wired RAM
          918 MB          Page-ins
          0 B          Page-outs

CrassBrauer wrote:
... With the latest software updates for OS X, I've read that anti-virus software is largely superfluous for Mac. Any opinions to the contrary/negative experiences?
Almost. Anti-virus software is completely superfluous for Mac.
I have tested most of the commonly available Mac "anti-virus" products under controlled conditions. The only differences between them are their varying degree of worthlessness. Some are malicious and will corrupt your Mac. The vast majority of Mac problems reported on this site are the direct result of using such products.
OS X already includes everything it needs to protect itself from viruses and malware. Keep it that way with software updates from Apple.
A much better question is "how should I protect my Mac":
Never install any product that claims to "speed up", "clean up", "optimize", or "accelerate" your Mac. Without exception, they will do the opposite.
Never install pirated or "cracked" software, software obtained from dubious websites, or other questionable sources. Illegally obtained software is almost certain to contain malware.
Don’t supply your password in response to a popup window requesting it, unless you know what it is and the reason your credentials are required.
Don’t open email attachments from email addresses that you do not recognize, or click links contained in an email:
Most of these are scams that direct you to fraudulent sites that attempt to convince you to disclose personal information.
Such "phishing" attempts are the 21st century equivalent of a social exploit that has existed since the dawn of civilization. Don’t fall for it.
Apple will never ask you to reveal personal information in an email. If you receive an unexpected email from Apple saying your account will be closed unless you take immediate action, just ignore it. If your iTunes or App Store account becomes disabled for valid reasons, you will know when you try to buy something or log in to this support site, and are unable to.
Don’t install browser extensions unless you understand their purpose. Go to the Safari menu > Preferences > Extensions. If you see any extensions that you do not recognize or understand, simply click the Uninstall button and they will be gone.
Don’t install Java unless you are certain that you need it:
Java, a non-Apple product, is a potential vector for malware. If you are required to use Java, be mindful of that possibility.
Disable Java in Safari > Preferences > Security.
Despite its name JavaScript is unrelated to Java. No malware can infect your Mac through JavaScript. It’s OK to leave it enabled.
Block browser popups: Safari menu > Preferences > Security > and check "Block popup windows":
Popup windows are useful and required for some websites, but popups have devolved to become a common means to deliver targeted advertising that you probably do not want.
Popups themselves cannot infect your Mac, but many contain resource-hungry code that will slow down Internet browsing.
If you ever see a popup indicating it detected registry errors, that your Mac is infected with some ick, or that you won some prize, it is 100% fraudulent. Ignore it.
Ignore hyperventilating popular media outlets that thrive by promoting fear and discord with entertainment products arrogantly presented as "news". Learn what real threats actually exist and how to arm yourself against them:
The most serious threat to your data security is phishing. To date, most of these attempts have been pathetic and are easily recognized, but that is likely to change in the future as criminals become more clever.
OS X viruses do not exist, but intentionally malicious or poorly written code, created by either nefarious or inept individuals, is nothing new.
Never install something without first knowing what it is, what it does, how it works, and how to get rid of it when you don’t want it any more.
If you elect to use "anti-virus" software, familiarize yourself with its limitations and potential to cause adverse effects, and apply the principle immediately preceding this one.
Most such utilities will only slow down and destabilize your Mac while they look for viruses that do not exist, conveying no benefit whatsoever - other than to make you "feel good" about security, when you should actually be exercising sound judgment, derived from accurate knowledge, based on verifiable facts.
Do install updates from Apple as they become available. No one knows more about Macs and how to protect them than the company that builds them.
Summary: Use common sense and caution when you use your Mac, just like you would in any social context. There is no product, utility, or magic talisman that can protect you from all the evils of mankind.

After installing Mavericks I can no longer save a new word document or pdf by typing the name of the destination folder in the Finder window. The save button greys out. Solutions anyone?

After installing Mavericks I can no longer save a new word document or pdf by typing the name of the destination folder in the Finder window. The save button greys out. Solutions anyone?

Please follow these directions to delete the Mail "sandbox" folders. In OS X 10.9 there are two sandboxes, while in 10.8 there is only one. If you're running a version older than 10.8, this comment isn't applicable.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
~/Library/Containers/com.apple.mail
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder—not just its contents—to the Desktop. Leave the Finder window open for now.
Log out and log back in. Launch Mail and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window.
This action will delete any custom Mail stationery that you have created. If you want to preserve it, ask for instructions.
If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Repeat with this line:
~/Library/Containers/com.apple.MailServiceAgent
Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

After instaling mavericks terminal, preview, app store, etc, doesn't work anymore

after instaling mavericks the terminal, preview, app store, etc, doesn't work anymore...
What have to do to solve this problem?

You ran a defective third-party "utility" such as "CleanMyMac" that purports to "clean up" "junk" files. What it really does is to corrupt the operating system.
The first thing you need to do is remove that software, if you know what it is, according to the developer's instructions. Never install it, or anything like it, again. Then see below.
If you don't already have a current backup, back up all data, then reinstall the OS. You don't need to erase the startup volume, and you won't need the backup unless something goes wrong. If the system was upgraded from an older version of OS X, you may need the Apple ID and password you used.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it. The same goes for Xcode.

After installing mavericks on mac mini network printers disappeared

After installing Mavericks on my Mac Mini, all printers on the home wifi network disappeared and cannot get them back. Tried deleting and re-installing printers and all updates. Network does not see them from the Mac Mini. Is there some workaround or solution to this? Everything worked perfectly until the Mavericks upgrade.

Was there any evidence of a new or update printer driver at the Epson site for use with Mavericks OS X? Even if so, that may not be enough as the peripherial makers can be steps behind a new & different OS.
I have two Epson printers, one is an all-in-one WF845 (bought at 50% off) and an older Photo Stylus 820, this still makes great prints; both work wireless in different ways. However I have what are essentially antiques in both hardware and software.
Not sure if there are any third party drivers that could help as a fix or a patch for the situation you face, if Epson hasn't a working alternative to being printerless. Too bad that paperless society didn't evolve to save a few trees and thousands of gallons in expensive ink.
Good luck & happy computing!

ITunes not working after installing Mavericks

I cannot open i.tunes after installing Mavericks. I cannot unistalled it either (to reinstall it) since a window appears saying it cannot be dropped or changed in any way. Thank you for your help.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to gather information about the state of your computer. That information goes nowhere unless you choose to share it on this page. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them.
Here's a summary of what you need to do: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a couple of minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in your browser, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s:\n\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -q XML\|exec && echo $f; done; }; Pc () { o=`grep -v '^ *#' "$2"`; Pm "$1"; }; Pm () { [[ "$o" ]] && o=`sed '/^ *$/d; s/^ */ /' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id | grep -qw '80(admin)'; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed '8!d;s/^ *//'; o=`SP Hardware | awk '/Mem/{print $2}'`; o=$((o<4?o:0)); Ps "Memory (GB)"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; o=`SP USB | sed -n '1d; /:$/{s/ *:$//;x;s/\n//p;}; /V.*[(]/{s/^[^(]*/ /;H;}; /Apple/{s/.//g;h;}'`; Pm "USB"; o=`pmset -g therm | sed 's/^.*CP/CP/'`; egrep -q 'No th|pms' <<< "$o" && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; grep -q '= [^GO]' <<< "$o" || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; d=(/ ""); D=(System User); for i in 0 1; do o=`cd ${d[$i]}L*/L*/Dia* && ls | awk -F_ '!/ag$/{$NF=a[split($NF,a,".")]; print}' | tail`; Pm "${D[$i]} diagnostics"; done; o=`syslog -F bsd -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|n Cause: -|NVDA\(|pagin|SATA W|ssert|timed? ?o' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); o=${s[2]}%; Ps "CPU usage by process \"$s\" with UID ${s[1]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); s[2]=${s[2]%[+-]}; o=$((s[2]>=25000?s[2]:0)); Ps "Mach ports used by process \"$s\" with UID ${s[1]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'`; Pm "Extrinsic system jobs"; o=`launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | grep -v com\.apple\.CSConfig | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/Star*; do M; done`; Pm "Startup items"; o=`find -L /S*/L*/E* {/,}L*/{A*d,Compon,Ex,In,Keyb,Mail,P*P,Qu*T,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB\ :CFBundleIdentifier "$d/Info.plist") || ID="No bundle ID"; egrep -qv "^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|\.hpio|JMicron|microsoft\.MDI|print|SoftRAID" <<< $ID && printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find -L /u*/{,*/}lib -type f | while read f; do file -b "$f" | grep -qw shared && ! codesign -v "$f" && echo $f; done`; Pm "Unsigned shared libraries"; o=`launchctl getenv DYLD_INSERT_LIBRARIES`; Pm "Inserted libraries"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; Ps "DNS"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; Pc "hosts" <(grep -v 'host *$' /etc/hosts); Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed 's/\..*$//;s/-[1-9]$//'; o=`find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l`; Ps "Restricted user files"; cd; o=`SP Fonts | egrep "Valid: N|Duplicate: Y" | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign ($) or a percent sign (%). If you get the percent sign, enter
exec sh
in the window and press return. You should then get a new line ending in a dollar sign.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know your password, or if you prefer not to enter it, just press return three times at the password prompt.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that takes administrator privileges.
The test may take up to a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line "[Process completed]" to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report your results. No harm will be done.
8. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If it happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of Apple Support Communities ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

After installing Mavericks Acrobat reader stopped working, Skype stopped working, lost a bunch of e-mails in my gmail account in Mail.

After installing Mavericks Acrobat reader stopped working, Skype stopped working, lost a bunch of e-mails in my gmail account in Mail. Anyone has a fix? I can't open PDF files anymore...

Do a backup.
Take notes of all account information or take screen shots. You may need to set the accounts up again. Quit Mail.
Copy the line below.
~/Library/Containers/com.apple.mail
Select Go/Go To Folder from the Finder menu bar. Paste the line into the window. You won’t see it.
Move the folder com.apple.mail to your desktop. You must move the entire folder, not just the contents.
Relaunch Mail and test. If the problem is solved, recreate any required Mail settings and import any emails you want to save from the folder on the desktop. If the problem remains, return the folder to where you got it replacing the one that is there.
Information learned from Linc Davis.
If you prefer to make your user library permanently visible, use the Terminal command found below.
Show User Library Directory in Mac OS X 10.7 Lion & 10.8 Mountain Lion
You might want to bookmark the command. I had to use it again after every update. I have also been informed that if you drag the user library to Finder it will remain visible.

After installing Mavericks wifi won't see my network (WPA2 Personal)

Similar Messages

Maybe you are looking for