After installing Mountain Lion my MS Word created this message: PowerPC applications are no longer supported. Are all my documents lost?
After installing Mountain Lion my MS Word created this message: PowerPC applications are no longer supported. Are all my documents lost?
pastis51 wrote:
will it convert my documents from iCloud?
What do you mean by this exactly?
Similar Messages
-
Printer won't work after installing mountain lion?
printer won't work after installing mountain lion?
Assuming you've first checked Software Update to see if there are any updated drivers and it's still not working, you could try resetting the printing system.
System Preferences>Print & Scan, Control+Click or Right Click on a printer on the left and select 'reset printing system'. All printers will be deleted and need to be added again. -
Microsoft Word Intermittently Crashing After Installing Mountain Lion
After installing Mountain Lion (10.8), Microsoft Word 2011 (v 14.2.3, currently the latest update) is intermittently crashing. This is not the error I have seen reported elsewhere where Word crashses on start up. Rather, it starts fine, runs for a while, then suddently freezes and gives an error message. Unfortunately I do not remember the full error message, but it stated something like "Microsoft Office cannot write to the hard drive..." I was prevously running Microsoft Office 2011 and had no problems until upgrading to Mountain Lion.
So far I tried repaired disk permissions, both via the disk utility application and by restarting while holding down the option key to boot into disk utility directly. This did not solve the problem.
I also checked the activity monitor, because after crashing the computer starts running very hot. The activity monitor shows a process called "mtmd", which is using 50-80% of the CPU. This activity seems to persist until the computer is restarted again.
I also checked fonts in Font Book, but there appear to be no duplicate fonts, which I thought might cause a problem in Word.
Any suggestions would be greatly appreciated.Hi there,
I've been getting the same error message for teh last few days. Word and Mountain Lion seemed to be playing well together until the last MS update (now running Word 2011 14.2.3). Fans go into overdrive and always a reboot required. Additionally, my DOCX is gone from where it was saved and in place only a word.tmp file remains. Sometimes I can open the temp file and recover all of the data but sometimes not. Luckily Time Machine has saved me on both occasions when the tmp file wouldn't open.
Excel and Powerpoint are currently running very smoothly (in fact I dare say better than previously).
I've tried running the DOCX from local drives and two external drives all with the identical results. However, after this occurring for the nth time I noticed that it seems to occur when Time Machine kicks in. I'm presently testing it with Time Machine turned off and all seems ok. Though it does kind of defeat the purpose! -
After installing mountain lion the local mail boxes disappeared
after installing mountain lion the local mail boxes disappeared.
This is my problem too:
All of my local mailboxes (On my Mac) disappeared from the sidebar. However, I do not have the 'triangle' on the Inbox that I can turn to reveal the list of mailboxes -- that disappeared too (and nothing happens when I hover over "Inbox"). I do know that the mailboxes are still there, somewhere, because when I go to create a New Mailbox, I can navigate to "On My Mac" and the entire mailbox list shows up there in the dropdown. How do I get them back onto my sidebar if the option to do that is no longer on the "Inbox" icon? -
After installing Mountain Lion, my Time Machine won't back up ... says the sparsebundle is in use
After installing Mountain Lion, my Time Machine won't back up ... says the sparsebundle is in use
Standard problem in ML.. apple do not seem to want to recognise.
Reboot the TC .. if that fails restart the whole network in correct order.. modem.. router/TC... clients.. with 2min gap.
There are other suggestions like changing the password.. all they do is the same as reboot.
Read C12.. most quoted Q in pondini website history. This is asked 10 times a day.
http://pondini.org/TM/FAQ.html
Here is another way to get a useful utility in ML.. rather than toyland version.
How to load 5.6 into ML.
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall 6.1 so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool. -
Can't activate FaceTime after installing Mountain Lion
After installing Mountain Lion, I opened Facetime and attempted to activate it using my Apple ID, this was what I got:
"The server encountered an error processing registration. Please try again later."
I created a new Apple ID and tried again; same thing. I contacted Apple Support for help. After hours of instructions, reboots of my MacBook, reinstalling Mountain Lion, and a lot of patience later., the outcome was the same. It just couldn't be activated.
Today, I tried to activate Game Center, know what? Similar problem. This was the error message I've got:
"The requested operation couldn't be completed due to an error communicating with the server."
Any idea?Facetime for Mac community
-
HT1338 Why is my MacBook Pro running so slow after installing Mountain Lion 10.8.
Why is my MacBook Pro running so slow after installing Mountain Lion 10.8. I have restarted, created more free space on my hard drive and run disk utilities. Simple operations result 20 seconds or more of the spinning wheel. Some are so slow that the operation does not happen at all. Itunes music cuts out during operations.
Check out this article by Thomas Reed for help http://www.reedcorner.net/understanding-upgrade-nightmares/. Also, make sure all apps are compatible with Mountain Lion using www.roaringapps.com. Do you have any antivirus installed? Make sure all apps are updated as well.
-
After installing Mountain Lion, I tried to scan from my Canon MX870 and received the message: "MP Navigator EX quit unexpectedly. Click Reopen to open the application again. A report will be sent to Apple," This problem happened right after I installed Mountain Lion. I then downloaded Canon's upgraded software and drivers for the MX 870 and the problem was resolved. Now one month later, the problem has returned.
rjliii wrote:
Solved problem with original Canon software. When I downloaded Canon software upgraded for OS X 10.8, I got all by Navigator Ex. Noticed that on Canon's site, the upgraded version is 3.1; my app was 2.1. Upgraded to 3.1 for Nav. Ex, and it works.
You should still use Image Capture IMHO. If it was my gear, that's what I would do. No need to worry about software upgrades. -
after installing mountain lion I lost pictures in iphoto, lost my musisc in itunes, my icluod is not working, internet its very slow and some other issues. There is a way how to fix these issues
Open System Preferences > iCloud
Deselect the box next to Photo Stream then reselect it.
Now for your music. Launch iTunes. From the iTunes menu bar top of your screen click iTunes > Preferences then select the Store tab.
Select: Music. (and Apps and Books) if you want.
Click OK.
iCloud syncs via your Wi-Fi network so give it a minute or two to reset your photos and music.
Slow internet ... try turning off the modem for a few minutes, then turn it back on. -
After installing Mountain Lion, iMessages and Facetime does not work. When I try to sign-in I get a message that says: The server encountered an error processing registration. Please try again later. After 4 calls to apple and 8 and a half hours on the phone. The apple people does not how to solve the problem. The last thing they told me is that they will send the problem to their engineers and I will hear from them. unfortunately they have not contact me.
During the phone calls I tried putting the date and time in automatic, changing the username and password, I even tried using somebody elses username and password. Please help, facetime is my tool to telecomute, and it is hurting my job.I had the same problem and found the solution here:
https://discussions.apple.com/thread/3189272 -
Numbers does not open with the main user after installing mountain lion. It works flawlessly when I use the second account on my mac. What got corrupted in the admin-account, something in the user-library? How can I fix it? I´m kinda desperate... (the same happens with the other iWork-Apps!)
Looking forward to hearing from somebody with a littlemore expertise than me, Chrisyou can remove preferences files by navigating to the Preferences folder for your user as follows:
0) Quit ALL iWork apps (Keynote, Pages and Numbers)
1) from the Finder select the menu item "Go > Go To Folder…". This will bring up a dialog:
2) enter the path "~/Library/Preferences" (no double quotes)
3) find the files:
com.apple.iWork.Keynote.plist
com.apple.iWork.Numbers.plist
com.apple.iWork.Pages.plist
and move these to the trash. I would NOT empty until later.
4) restart Numbers -
Ive just upgraded my late 2009 macbook, and things are not working properly. First of all, when I started the computer first time after installing Mountain Lion, some message advised me that some files were impossible to install. Once I wrote my password, and for now on, everytime I start the session, another window advise me that "Java SE 6" is missing, due that, the computer can't run some "CS5Service Manager". If I try to install it, the download ends with an error. If finally, you skip the istallation, you arrive to the dock, but the menu bar at the top of the screen doesn't show up.
In addition, my trackpad doesn't works either. I can move the arrow but i can't click anywhere, probably because the option of clicking by touching is disabeled and I can't performance a regular click.
I'll be very glad if someone know what the heck is happening with my computer. Anyway, I'm going to the genius bar next Saturday. Thx!We're sorry.
We can't find the article you're looking for.
Please return to the Apple Support homepage.
Sigh. -
Can No Longer Get Camera Photos After Installing Mountain Lion
After installing Mountain Lion, I am no longer am able to see pictures from my digital camera thru the USB port. This camera has worked for years with my iMac, but not anymore. Anybody else having this issue after installing the newest system?
DickPaul_31:
I have not tried to import the photos directly into iPhoto. However, I did remove the SD card from the camera and plug it into a USB card reader, and my iMac would NOT read the photos that way either. I took the camera and plugged it into my Win. 7 laptop and the pictures showed up nicely, so I know the camera and the card are Ok. My iMac has been working strangely since I installed Mountain Lion. I'm getting lockups using iMovie too.
Dick -
After installing Mountain Lion on my Mac Book Pro, I can no longer access two shared drives. Diagostics cannot solve the problem. I am using Parallels to run Qucikbooks ERP on these shared drives. How do I get my Mac to see these drives and access them?
Don't know what to tell you, but I also have an AEBS-Gen5 with a MBP Retina and Mac Mini using WiFi. Both are running Mountain Lion and I don't have any WiFi connection issues. Two iPhones in the household use WiFi with no issues along with a printer and 2 Windows 7 laptops.
First thing I would try is to shutdown all computers connected to the AEBS. Then power off the AEBS and finally the cable/DSL modem. Then reverse the order and power on the cable modem, wait for all the lights to be solid, power on the AEBS, wait for the light to show solid green; then power up a computer that uses WiFi.
If the above doesn't work, you might try repairing permissions via Disk Utility. If that doesn't help maybe a PRAM reset would work. -
After installing Mountain Lion on my 17" MBP G-RAID mini connected via Tempo SATA Edge ExpressCard34 is no longer recognized. I restored icon and access by removing 34 card and substituting FW800 for eSATA. Any fix for the higher speed connection? TIA
Looks like the Silicon Image drivers were moved to the incompatible software folder during install/upgrade.
Downloaded latest drivers, errored out of install claiming that the drivers were from an unknown author!!!
Emailed their tech support this evening describing problem.
Maybe you are looking for
-
Displaying the total no of records in ALV ouput.
Hi everybody, I am displaying the output in ALV. I want display the total number of records at the top of page.( before the columns). Can any one throw light on this plz. Karunakar reddy
-
Hi, I want to know the standard script form for putaway in transaction LT31 .Is there any standard smart form for putaway in WM .And one thing you suggest that is it feasible to develop the smart form in WM? Kindly reply to all my queries . Re
-
Okay, every time I try to call +3534333200, I keep getting a Kwiksave in Queensbury Park, wherever that is. I tried the Ireland number as well, and got through to kwiksave AGAIN. Have Creative done a bunk? Getting rather frustrated now. If I dial 003
-
hi all, We have a requirement in our project where we need to convert the following source xml into the target xml. source: <Request xmlns="http://xmlns.oracle.com/testApp_jws/Extract/Extract"> <Reg> <RefNum>RefNum1</RefNum> <Name>Name2</Name> <Statu
-
Hey guys, is there a way to examine the "X" digit within an element of an array? Example: nums[0] = 234 nums[1] = 96 nums[2] = 436 nums[3] = 150 If I wanted to find the "one's" digit in nums[0], how would I do it? We can obviously see that the digit