After installing mountain lion the local mail boxes disappeared
after installing mountain lion the local mail boxes disappeared.
This is my problem too:
All of my local mailboxes (On my Mac) disappeared from the sidebar. However, I do not have the 'triangle' on the Inbox that I can turn to reveal the list of mailboxes -- that disappeared too (and nothing happens when I hover over "Inbox"). I do know that the mailboxes are still there, somewhere, because when I go to create a New Mailbox, I can navigate to "On My Mac" and the entire mailbox list shows up there in the dropdown. How do I get them back onto my sidebar if the option to do that is no longer on the "Inbox" icon?
Similar Messages
-
Hi,
I have been using MacBook Pro mid 2010 and recently I upgraded my OS from Snow Leopard to Mountain Lion. Since then whenever I charge my computer it stops charging at 99% but when I was using Snow Leopard it use to fully charge to 100%. Does installing the new OS preventing it to charge to 100% or something is wrong with the hardware.
Thank you
RegardsThanks for the reference. Still one thing I am not able to understand is that in Snow Leopard after the full charge it use to show 100% so why not in Mountain Lion. Snow Leopard is also a advance OS and if that is the case then the feature of not charging to the full capacity should exist.
-
After installing mountain lion the airplay icon does not appear
Do I need to perform additional installations or set preferences to have it shown in the top menu bar?
Your model iMac doesn't support Airplay mirroring. Airplay in iTunes should be available.
-
Hi
I give up. I just cannot see my exchange inbox in Mail after installing Mountain Lion. My mail is not being deleted. Its still in my inbox I just can't see it. I've tried everything suggested on the forums and nothing is working for me.
My productivity has completely stalled and I really need to move to an email client that is going to work seamlessly with Mountain Lion.
Any recommendations?endobrendo wrote:
I have the same problem. Upgraded to ML, and my Mac Mail suddenly can't communicate with Gmail's SMTP server.
I have been having the SAME problem with ALL my Gmail accounts with Mail.app - It is very annoying, especially when you have clients and other important email to respond to. So you're definitely NOT alone in this department.
Might have to go back to Thunderbird or something until this gets fixed, which is going to really suck because I have 5000+ emails along with all my Email Folders in Mail not too mention the Rules I have had setup for years!
AND with the RSS Feeds NOT working in BOTH Mail and Safari! That was a HUGE MISTAKE and defintely a STEP BACKWARDS on whoever's idea that was for sure! -
After installing Mountain Lion, I tried to scan from my Canon MX870 and received the message: "MP Navigator EX quit unexpectedly. Click Reopen to open the application again. A report will be sent to Apple," This problem happened right after I installed Mountain Lion. I then downloaded Canon's upgraded software and drivers for the MX 870 and the problem was resolved. Now one month later, the problem has returned.
rjliii wrote:
Solved problem with original Canon software. When I downloaded Canon software upgraded for OS X 10.8, I got all by Navigator Ex. Noticed that on Canon's site, the upgraded version is 3.1; my app was 2.1. Upgraded to 3.1 for Nav. Ex, and it works.
You should still use Image Capture IMHO. If it was my gear, that's what I would do. No need to worry about software upgrades. -
After installing Mountain Lion, iMessages and Facetime does not work. When I try to sign-in I get a message that says: The server encountered an error processing registration. Please try again later. After 4 calls to apple and 8 and a half hours on the phone. The apple people does not how to solve the problem. The last thing they told me is that they will send the problem to their engineers and I will hear from them. unfortunately they have not contact me.
During the phone calls I tried putting the date and time in automatic, changing the username and password, I even tried using somebody elses username and password. Please help, facetime is my tool to telecomute, and it is hurting my job.I had the same problem and found the solution here:
https://discussions.apple.com/thread/3189272 -
Numbers does not open with the main user after installing mountain lion. It works flawlessly when I use the second account on my mac. What got corrupted in the admin-account, something in the user-library? How can I fix it? I´m kinda desperate... (the same happens with the other iWork-Apps!)
Looking forward to hearing from somebody with a littlemore expertise than me, Chrisyou can remove preferences files by navigating to the Preferences folder for your user as follows:
0) Quit ALL iWork apps (Keynote, Pages and Numbers)
1) from the Finder select the menu item "Go > Go To Folder…". This will bring up a dialog:
2) enter the path "~/Library/Preferences" (no double quotes)
3) find the files:
com.apple.iWork.Keynote.plist
com.apple.iWork.Numbers.plist
com.apple.iWork.Pages.plist
and move these to the trash. I would NOT empty until later.
4) restart Numbers -
Ive just upgraded my late 2009 macbook, and things are not working properly. First of all, when I started the computer first time after installing Mountain Lion, some message advised me that some files were impossible to install. Once I wrote my password, and for now on, everytime I start the session, another window advise me that "Java SE 6" is missing, due that, the computer can't run some "CS5Service Manager". If I try to install it, the download ends with an error. If finally, you skip the istallation, you arrive to the dock, but the menu bar at the top of the screen doesn't show up.
In addition, my trackpad doesn't works either. I can move the arrow but i can't click anywhere, probably because the option of clicking by touching is disabeled and I can't performance a regular click.
I'll be very glad if someone know what the heck is happening with my computer. Anyway, I'm going to the genius bar next Saturday. Thx!We're sorry.
We can't find the article you're looking for.
Please return to the Apple Support homepage.
Sigh. -
After installing Mountain Lion on my Mac Book Pro, I can no longer access two shared drives. Diagostics cannot solve the problem. I am using Parallels to run Qucikbooks ERP on these shared drives. How do I get my Mac to see these drives and access them?
Don't know what to tell you, but I also have an AEBS-Gen5 with a MBP Retina and Mac Mini using WiFi. Both are running Mountain Lion and I don't have any WiFi connection issues. Two iPhones in the household use WiFi with no issues along with a printer and 2 Windows 7 laptops.
First thing I would try is to shutdown all computers connected to the AEBS. Then power off the AEBS and finally the cable/DSL modem. Then reverse the order and power on the cable modem, wait for all the lights to be solid, power on the AEBS, wait for the light to show solid green; then power up a computer that uses WiFi.
If the above doesn't work, you might try repairing permissions via Disk Utility. If that doesn't help maybe a PRAM reset would work. -
After installing Mountain Lion on my 17" MBP G-RAID mini connected via Tempo SATA Edge ExpressCard34 is no longer recognized. I restored icon and access by removing 34 card and substituting FW800 for eSATA. Any fix for the higher speed connection? TIA
Looks like the Silicon Image drivers were moved to the incompatible software folder during install/upgrade.
Downloaded latest drivers, errored out of install claiming that the drivers were from an unknown author!!!
Emailed their tech support this evening describing problem. -
After installing Mountain Lion. No sound. Under sound, where it says select an output device, it says no output devices found, and there is no sound. How do I fix this? I have reinstalled the os twice and still the same. I have also repaired permissions.
Try resetting the PRAM and SMC...
PRAM Reset:
http://support.apple.com/kb/HT1379
SMC Reset:
http://support.apple.com/kb/HT3964
Hope this helps! -
After installing Mountain Lion, my Time Machine won't back up ... says the sparsebundle is in use
After installing Mountain Lion, my Time Machine won't back up ... says the sparsebundle is in use
Standard problem in ML.. apple do not seem to want to recognise.
Reboot the TC .. if that fails restart the whole network in correct order.. modem.. router/TC... clients.. with 2min gap.
There are other suggestions like changing the password.. all they do is the same as reboot.
Read C12.. most quoted Q in pondini website history. This is asked 10 times a day.
http://pondini.org/TM/FAQ.html
Here is another way to get a useful utility in ML.. rather than toyland version.
How to load 5.6 into ML.
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall 6.1 so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool. -
Final Cut Pro X after installing Mountain Lion I have lost some of the "additional content" which was available by clicking on "Download Additional Content" in the roll down from "Final cut Pro". Now this feature takes you to Apple store update? which produces nothing! How can I download these free sound and music files, what has happened? Please help as there is nothing on the apple site to cover this??
Final Cut Pro X after installing Mountain Lion I have lost some of the "additional content" which was available by clicking on "Download Additional Content" in the roll down from "Final cut Pro". Now this feature takes you to Apple store update? which produces nothing! How can I download these free sound and music files, what has happened? Please help as there is nothing on the apple site to cover this??
-
After installing Mountain Lion, I experienced a noticeable reduction in performance. When I log-in, I must wait several seconds for the cursor to become effective in the log-in window. When I come out of standby mode, I have the same issue. Also, when looking at cpu usage, Outlook appears to be using up to 67% of cpu when not doing anything. I'm not happy with this result.
Does anyone have suggestions as to how to fix?Uninstall Office and reinstall it
Use these instructions to do it and do not omit any of them. -
I have Calendar alerts on every device [Mac/iPad/iPhone] after installing Mountain Lion. How do I stop this? Tech support acted like I was the first person this happened to. Anyone have the solution?
Well, whichever device you uncheck = exclude from calendars (and reminders) via iCloud will be excluded as both, receiver and sender. It's an "all or nothing", I guess. Otherwise it'd get more complicated, and the support calls could easily fill an extra forum...
@lmp68: don't think iTunes is it, in the days of iCloud that would sure take quite an extra effort, if possible at all.
Maybe you are looking for
-
Automatic delivery schedule for Scheduling Agreement
Hi all........... I like to create automatic delivery schedule both JIT & FRC schedules for Schedule agreement, means system has to suggest the schedule lines. I created SA and creation profile, when Im trying to generate JIT schedule system showing
-
I've gone through the EAD spec. and I've come up with a detailed list of comments that I'd like to post here and also will post over at TheServerSide.com and send directly to the JSR group. This area will give the community a chance to discuss this m
-
How can I compare two periods in a report based on parameters
Hi all, I'm wondering how can I create a matrix report which compares the sales of two periods. These periods are variable and coming from the parameter section that the user is using. For example, I have got the following table "Sales". Columns are:
-
Issues with subject in idm 8.1
Below are details about issue we are facing. I am using IDM 8.1 version We have used Checkout View in the provisoning workflows. The arguments of the Checkout view are - <Argument name='op' value='checkoutView'/> <Argument name='type' value='User'/>
-
Cost of Inventory Opening Balance
Dear all, I understand from the accounting terms that COS = opening stock+purchases-closing stock. I need to input the cost of inventory (COS)as opening balance. What account should I debit/credit. I have inventory account, Inventory opening balance