After installing Mountain Lion.  Time on my computer freezes and I need to reboot to correct it.  Is there a fix for this

To correct this issue I need to reboot.  Has anyone else experienced this issue and is there a fix?

BOTH...when I try to hover over the time, the color wheel of death appears.  AND when I go into system prefs, the clock tab selections have been deselected.  When I try to select "show date and time in menu bar" again, it stalls for a bit, and then reverts to its deselected state.  I've tried rkaufmann87's fix, and it works for just a bit, then back to whacky.  Any ideas?

Similar Messages

  • Outlook (MS Office for MAC2011) appears to be using up to 67% of my CPU time even when I'm doing nothing.  Also, immediately after installing Mountain Lion, log-ins to the OS and normal operations noticeably slowed.  Suggestions?

    After installing Mountain Lion, I experienced a noticeable reduction in performance.  When I log-in, I must wait several seconds for the cursor to become effective in the log-in window.  When I come out of standby mode, I have the same issue.  Also, when looking at cpu usage, Outlook appears to be using up to 67% of cpu when not doing anything.  I'm not happy with this result.
    Does anyone have suggestions as to how to fix?

    Uninstall Office and reinstall it
    Use these instructions to do it and do not omit any of them.

  • After downloading Maverick, my photobooth images were out of chronological order. I've now downloaded Yosemite and they are still out of order. Is there a fix for this?

    After I downloaded Maverick, I noticed that my photobooth images were out of chronological order. I've since downloaded OS X Yosemite (10.10) and they are still out of order. My version of Photobooth is 7.0 (719). Is there a fix for this? Many thanks in advance.

    8-doing a factory reset, then repeating steps 1 through 6
    Do you mean a restore to factory settings?. If so did you set up as new or restore from back up afterwards?

  • Epson Stylus Pro 7700 will not work after installing Mountain Lion, I have update all drivers and firmware

    This is a large format printer used for proofs that I cannot use since upgrading to Mountion Lion, anyone else had printer issues?

    Checked RoaringApps App Compatibility Table.  These are apps not drivers but.. 
    All I see listed is:
    - Epson LFP Remote Panel 3.6.1 and with a ? under Mountain Lion
    - Epson Printer Utility 4 8.6.1 and red X indicating non-compatibility with Mountain Lion
    - Epson Scan 3.7.5 and a green check mark showing compatibility with Mountain Lion
    http://roaringapps.com/apps:table/tags/_e/index_tags/_e
    On the Epson Website.  Under Drivers and Downloads for the Stylus Pro 7700 with Mountain Lion, it looks like there is:
    Drivers:
    - Printer Driver v8.63
    Utilities:
    - Remote Panel 2 Utility v1.30
    - Uninstall Center v1.1.0
    Firmware:
    - Firmware Update version KND14BA
    Epson Stylus Pro 7700 Printer - Drivers & Downloads
    Did you download and install all of these from the Epson website?

  • After installing Mountain Lion on my Imac, volume keys and scroll function are disabled.

    I just installed Mountain Lion on my 2 year old Imac and now the keyboard volume controls don't work and the scroll function on my magic mouse has stopped as well. All these were working fine until the install. I have seen other posts of people having the same problem but haven't seen any definite solutions yet. Really annoying "benefit" to upgrading.

    For the mouse scrolling issue, check the setting in System Preferences > Accessibility > Mouse & Trackpad > Mouse options... button > check Scrolling.

  • Safari won't load after installing Mountain Lion.  If I shut down and unplug the internet connection for a minute, it starts working again.  But only for awhile.

    Help!

    Hi,
    Mac OS: Long Delay Before Web Pages Start to Load, Then Load Suddenly at Normal Speed
    *I tried entering a manual DNS*
    If you have not tried Open DNS, go here. Open DNS
    Just click the computer icon and follow the instructions.
    Empty the Cache. To empty the cache memory go to the Safari menu and click 'Empty Cache
    Reset Safari go to the Safari menu and click 'Reset Safari.. select the first 5 buttons and click Reset.
    To delete Safari's icon cache using the Finder, open your user folder, navigate to ~/Library/Safari/Icons and delete its contents.
    Carolyn
    Message was edited by: Carolyn Samit

  • My ipod shuffle needs to be formatted, and my computer doesn't recognize device, i checked into the driver details and it says that no drivers are downloaded is there a fix for this?

    i really need help with this please

    Where do you see these "driver details"?  Is this via Device Manager?
    Did this iPod previously work with this PC before or is the first time you are trying to connect it?
    B-rock

  • Can No Longer Get Camera Photos After Installing Mountain Lion

    After installing Mountain Lion, I am no longer am able to see pictures from my digital camera thru the USB port.  This camera has worked for years with my iMac, but not anymore.  Anybody else having this issue after installing the newest system?
    Dick

    Paul_31:
      I have not tried to import the photos directly into iPhoto.  However, I did remove the SD card from the camera and plug it into a USB card reader, and my iMac would NOT read the photos that way either.  I took the camera and plugged it into my Win. 7 laptop and the pictures showed up nicely, so I know the camera and the card are Ok.  My iMac has been working strangely since I installed Mountain Lion.  I'm getting lockups using iMovie too.
    Dick

  • Ive just upgraded my late 2009 macbook, and things are not working properly. First of all, when I started the computer first time after installing Mountain Lion, some message advised me that some files were impossible to install.

    Ive just upgraded my late 2009 macbook, and things are not working properly. First of all, when I started the computer first time after installing Mountain Lion, some message advised me that some files were impossible to install. Once I wrote my password, and for now on, everytime I start the session, another window advise me that "Java SE 6" is missing, due that, the computer can't run some "CS5Service Manager". If I try to install it, the download ends with an error. If finally, you skip the istallation, you arrive to the dock, but the menu bar at the top of the screen doesn't show up.
    In addition, my trackpad doesn't works either. I can move the arrow but i can't click anywhere, probably because the option of clicking by touching is disabeled and I can't performance a regular click.
    I'll be very glad if someone know what the heck is happening with my computer. Anyway, I'm going to the genius bar next Saturday. Thx!

    We're sorry.
    We can't find the article you're looking for.
    Please return to the Apple Support homepage.
    Sigh.

  • After installing Mountain Lion, my Time Machine won't back up ... says the sparsebundle is in use

    After installing Mountain Lion, my Time Machine won't back up ... says the sparsebundle is in use

    Standard problem in ML.. apple do not seem to want to recognise.
    Reboot the TC .. if that fails restart the whole network in correct order.. modem.. router/TC... clients.. with 2min gap.
    There are other suggestions like changing the password.. all they do is the same as reboot.
    Read C12.. most quoted Q in pondini website history. This is asked 10 times a day.
    http://pondini.org/TM/FAQ.html
    Here is another way to get a useful utility in ML.. rather than toyland version.
    How to load 5.6 into ML.
    1. Download 5.6 for Lion.
    http://support.apple.com/kb/DL1482
    Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
    2. Download and install unpkg.
    http://www.timdoug.com/unpkg/
    Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
    You cannot uninstall 6.1 so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.

  • Bluetooth inactive after installing mountain lion - your computer restarted because of a problem

    Good day
    I read up on forums, and I think my reboot error is due to my bluetooth that is inactive, which happened after installing Mountain Lion
    My Bluetooth worked before under Snow Leopard
    I have deleted the file under library to no avail
    I have rebooted with cmd option P R to no avail
    I have repaired permissions and this is the only message that pops up, and bluetooth still does not work after reboot.
    Repairing permissions for “Macintosh HD”
    Warning: SUID file “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent” has been modified and will not be repaired.
    This is my CONSOLE error report
    Fri Sep 14 11:27:24 2012
    panic(cpu 2 caller 0xffffff8002eb7b95): Kernel trap at 0xffffff7f83acc6c2, type 14=page fault, registers:
    CR0: 0x000000008001003b, CR2: 0x0000000000000008, CR3: 0x00000000050d2000, CR4: 0x00000000000606e0
    RAX: 0x0000000000000000, RBX: 0x0000000000000000, RCX: 0x7fffffffffffffff, RDX: 0x0000000000000200
    RSP: 0xffffff808170bd70, RBP: 0xffffff808170be20, RSI: 0x00000000000001ff, RDI: 0x0000000000000001
    R8:  0x0000000000000001, R9:  0x0000000000000000, R10: 0x0000000000000001, R11: 0x0000000000000000
    R12: 0xffffff800fe37401, R13: 0xffffff800d8b1e00, R14: 0xffffff800e1bb000, R15: 0xffffff7f83b06500
    RFL: 0x0000000000010246, RIP: 0xffffff7f83acc6c2, CS:  0x0000000000000008, SS:  0x0000000000000010
    Fault CR2: 0x0000000000000008, Error code: 0x0000000000000000, Fault CPU: 0x2
    Backtrace (CPU 2), Frame : Return Address
    0xffffff808170ba10 : 0xffffff8002e1d5f6
    0xffffff808170ba80 : 0xffffff8002eb7b95
    0xffffff808170bc50 : 0xffffff8002ece4ad
    0xffffff808170bc70 : 0xffffff7f83acc6c2
    0xffffff808170be20 : 0xffffff8003247b6a
    0xffffff808170be80 : 0xffffff7f83ace2f4
    0xffffff808170beb0 : 0xffffff800323b708
    0xffffff808170bf40 : 0xffffff8003236b65
    0xffffff808170bf60 : 0xffffff8002e3dcae
    0xffffff808170bfb0 : 0xffffff8002eb2677
          Kernel Extensions in backtrace:
             com.apple.iokit.AppleBluetoothHCIControllerUSBTransport(4.0.9f8)[AFA59211-C064- 3DA0-83BB-DA8DD75CBED5]@0xffffff7f83ac6000->0xffffff7f83aebfff
                dependency: com.apple.iokit.IOUSBFamily(5.1.6)[3D499FAA-A5C4-3ED8-BF37-3B561ED21D64]@0xffff ff7f83463000
                dependency: com.apple.iokit.IOACPIFamily(1.4)[A35915E8-C1B0-3C0F-81DF-5515BC9002FC]@0xfffff f7f83981000
                dependency: com.apple.iokit.IOPCIFamily(2.7)[8C9E06A4-13D0-33F5-A377-9E36F0ECC229]@0xffffff 7f83441000
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    12B19
    Please assist and I hope my thinking is correct that this is what is causing my restart error.

    I have been having the same problem for the past 2 days.I installed Mountain lion 5 days ago.There wasn't any problem for the first 3 days but after that my computer won't shut down,it always restarts when i ask it to shut down and i get the same message as dan1101.what is going on????

  • Time Machine won't work after installing Mountain Lion

    After installing Mountain Lion, I am unable to restore a file from time machine. I click on the time machine icon. It shows the bakups, I click on a previous backup but the screen doesn't roll back to the date. It only shows the current files. Example: I am trying to restore an email that was lost. I try to do a restore and it shows emails up to today even though I am asking for a back-up from a month ago.
    Bob

    Sorry, but I'm still not sure what you're seeing.
    Are you starting from Mail, per the blue box in Time Machine - Frequently Asked Question #15?
    Are you trying to restore emails from a mailbox in the "On My Mac" section?
    Do the older backups not appear in the TimeLine at all, or do they appear but are faded-out?
    Posting a screenshot might help.

  • My macbook pro is very slow after installing mountain lion

    my macbook pro is very slow after installing mountain lion?  Is anyone else having this issue?

    If you don't use an SSD and bump your RAM up to 8 Gb's you may experience slow speeds, but I noticed slow speeds with your general configuration in SL.
    one thing you should consider right now is, Spotlight is Reindexing your hard drive, that takes time and resources, (resources which you don't necessarily have to spare).
    If you continue feeling like your performance is slow, you have a few options with this computer (I have the same one).
    the express card slot can house a wintec SSD drive. That little door on the side of your machine is pure gold for a really quick solution for speeding up your machine. I have one in mine right now i'm using as a scratch disk for CS6 but I used to boot from it, and the speed boost was out of this world.
    You could take out the internal HDD and put in a new SSD (I have a Vertex 4 from OCZ) it is completely over kill but my experience is pretty fast and I keep up with the later MBP models colleagues have.
    There are some other options for you like taking out the optical drive (however I don't know if I'm supposed to talk about that here). Google Data Doubler.
    You need to also set it to always use the 9600 chipset, this will increase performance a lot too. to do this go to system preferences>energy saver>Better Performance. This switches the video card to the better one and makes a world of difference.
    Lastly, your RAM. after an EFI Firmware update, our computer support up to 8GBs of RAM. Do it!
    Late 08 MBP 2.53 GHZ 9600 chipset 8gb ram, Vertex 4 SSD

  • Microsoft Word Intermittently Crashing After Installing Mountain Lion

    After installing Mountain Lion (10.8), Microsoft Word 2011 (v 14.2.3, currently the latest update) is intermittently crashing.  This is not the error I have seen reported elsewhere where Word crashses on start up.  Rather, it starts fine, runs for a while, then suddently freezes and gives an error message.  Unfortunately I do not remember the full error message, but it stated something like "Microsoft Office  cannot write to the hard drive..."  I was prevously running Microsoft Office 2011 and had no problems until upgrading to Mountain Lion.
    So far I tried repaired disk permissions, both via the disk utility application and by restarting while holding down the option key to boot into disk utility directly.  This did not solve the problem.
    I also checked the activity monitor, because after crashing the computer starts running very hot.  The activity monitor shows a process called "mtmd", which is using 50-80% of the CPU.  This activity seems to persist until the computer is restarted again. 
    I also checked fonts in Font Book, but there appear to be no duplicate fonts, which I thought might cause a problem in Word. 
    Any suggestions would be greatly appreciated.

    Hi there,
    I've been getting the same error message for teh last few days. Word and Mountain Lion seemed to be playing well together until the last MS update (now running Word 2011 14.2.3). Fans go into overdrive and always a reboot required. Additionally, my DOCX is gone from where it was saved and in place only a word.tmp file remains. Sometimes I can open the temp file and recover all of the data but sometimes not. Luckily Time Machine has saved me on both occasions when the tmp file wouldn't open.
    Excel and Powerpoint are currently running very smoothly (in fact I dare say better than previously).
    I've tried running the DOCX from local drives and two external drives all with the identical results.  However, after this occurring for the nth time I noticed that it seems to occur when Time Machine kicks in. I'm presently testing it with Time Machine turned off and all seems ok. Though it does kind of defeat the purpose!

  • Mac pro won't wake up after installing Mountain Lion

    After installing Mountain Lion in my Mac Pro it won't wake up after long periods of sleep. I have tried unplugging it for 15 seconds and plugging it back in and starting it back up. No help. I've reset the Pram with no change.
    Chuck

    Two calls into tech support, but I think they may have helped me fix this.
    CHECK:
    \Library\LaunchAgents
    \Library\LaunchDaemons
    \Library\StartupItems
    remove any third party software and set aside.  (they told me I could keep some adobe, microsoft and HP items)
    THEN CHECK:
    System Preferences --> Users + Groups -->Login Items
    remove any third party stuff from in there.
    I'll know tomorrow morning if this REALLY works, but it dfefinitely allowed my computer to sleep and wakeup over a short period of time.

Maybe you are looking for

  • HOW DO YOU CHANGE THE WINDOW SIZE OF EBUSINESS SUITE ON STARTUP

    HOW DO YOU CHANGE THE WINDOW SIZE OF EBUSINESS SUITE ON STARTUP How do you change the window size for Ebusiness Suite after you log in. Currently it displays at 100% of the screen. I want to set it smaller, at some %

  • Synchronous Inbound ABAP Proxy - Manage status in SXMB_MONI

    Hi Gurus!! I have a synchronous SOAP->PI->ABAP Proxy. This ABAP Proxy sends a response to the Sender SOAP with the result of the process execution. If the execution finishes with an error (by example, the material to change is locked by another user)

  • In Store Pre Order Payment

    Can I pay off a pre order before the title is released?

  • Uninstall will not work: "uninstall not successful"

    I am attempting to uninstall Adobe Reader for Android from my htc droid incredible running Android 2.2. I receive a message "uninstall not successful". Alternately, I would be able to solve the problem if Adobe Reader would allow me to remove the def

  • Variable based on

    Hello everyone! I'm just learning JSP right now so I hope I can explain my problem correctly. If i'm not making sense please let me know. I have a table (FormFields) in my database that stores which fields should be displayed on my web form. The tabl