After installing Nvidia Driver, console broken... help

i am a newbie in arch linux, before i install nvidia driver, i can login to gnome and exit it with no problem, but after i use nvidia as the driver, whenever i change to console, or other tty, the screen look like broken, is there any solution for it.???

http://bbs.archlinux.org/viewtopic.php?id=30617
or try to use another version of driver

Similar Messages

[solved]display problems after installing nvidia driver

hi
i have nvidia geforce 8400 gs card, after i uninstalled all other drivers, installed nvidia,nvidia-utils, then nvidia-config,then installed vpdau-video,then restart
i noticed that hardware and deamon checks screen after boot became huge letters as if no driver installed yet, and when i run lxterminal i noticed black window on the top left of the screen exactly the same size as the terminal window, and when i browse using chromium and the page contains flash video, the video window image stays on the screen.
Last edited by shalaby (2011-05-02 15:33:41)

I think current nvidia driver is broken - I have these black windows at some rare situations also (under KDE without effects; no under OpenBox). IIRC, nvidia developers mentioned somewhere in Arch bugs system they are aware of the problem.

BSOD after installing NVIDIA driver (nvlddmkm.sys error)

Hi, I hope I'm posting this in the right place.
A few days ago I purchased an MSI GS60 044 (970m) laptop with Windows 8 preinstalled on it. I have an intense hatred for Windows 8 so I decided to do a clean install of Windows 7 using a disk I own. Everything was going well until I installed the NVIDIA graphics driver. The computer would run sluggishly and then Blue Screen with an error regarding "nvlddmkm.sys."
I got the drivers from MSI's website and followed the installation order on that page. I even tried downloading the latest driver from NVIDIA's website, but I got the same results.
Is anyone familiar with this issue? Is there anything I can do?
Thanks!
- Daniel

I really appreciate the help! I ended up reinstalling windows again and this time before installing the NVIDIA driver I installed the BIOS update that's provided under the "BIOS" tab on the GS60's support page. It's been installed for about 2 hours now with no crashes, so I hope that means it's fixed. I could just be getting lucky though, I'll post again tomorrow with results.
Unfortunately, now my LAN and WLAN drivers have stopped working. When I troubleshoot, windows says that there aren't any drivers detected. I have tried uninstalling and reinstalling both the bigfoot and intel drivers but neither are working. I just can't catch a break with this thing. >_<
In the event that I do have to send it to MSI, wouldn't the computer not be covered in their service anymore since I installed a different OS/formatted the original drives? I'm really hoping there isn't a hardware issue since I ordered the laptop brand new off of ebay.
Thanks again for all of the help!

[SOLVED]black screen after installing nvidia driver from official repo

Hi!
I have just made a clean install this afternoon and I really can not get the drivers from nvidia in the official rep to work. After booting it just gives me blackscreen.
What I have tried:
1. Blacklisted nouveau.
2. Doublechecked mkinitcpio.conf for nouveao under "MODULES" section.
3. Rebuilt initramfs by doing
mkinitcpio -p linux
4. i tried with a "nomodeset" by entering it in grub.
5. Last I tried to remove nouveau by doing
pacman -Ss nouevau
pacman -R mesa
pacman -Rc mesa (here I double checked the packages and nothing really vital for a full boot of a non-graphical interface (TTY1) is gone)
After Pressing enter from grub I can not see anythin, except from some text that flashes by, Something about checking /dev/sda6 for any errors... Except from that, nothing. Just a black screen.
I am writing this from my phone right now, please understand if I am doing any spelling errors (too lazy to chroot ehen in my bed and PC turned off for the night )
Last edited by f4rm0r (2015-03-06 22:30:15)

jasonwryan wrote:
So you have one of those dual GPU machines? Then you need to read the Bumblebee or Optimus pages on the wiki.
And mentioning that in your intial post would have helped: See How To Ask Questions The Smart Way.
I never really tried the intel gpu, nor did I knew that my mb had that compability to actually run with that, since I can not even change to only use the display connection from my cpu :0
Besides, I never really will use the built-in gpu on my proc unless my graphics card crashes, and if that happens, I can just create a chroot and read-on about bumblebee and such
I am right now writing this from my Desktop
I have some minor issues with my KDE environment, the text being so small I can barely read it inside of applications.... except from that I have used "Settings" to change it inside the KDE environment :b
So I can live with it, unless it happens inside games aswell
Anyway, I just did not knew about it, otherwise I would have read 'bout it and tried to fix it before i came here
I know how it is when ya dont get enough info about a problem like "This program won't work, why?" (I am the PC wizard amongst my friends, so I know ya should try everything, use google, and most of all, do not panic, it can and will be fixed :3
But ty anyway for the suggestion Jason, appreciate it!
will mark this thread as solved now

[SOLVED] No sound after installing NVIDIA driver

I have just got a new graphics card (NVIDIA GT 610) and I have installed the proprietary driver for it. My PC has in-built Intel GPU. I had a problem with that that was fairly straight forward to fix. I blacklisted the i915, intel_agp modules as suggested here https://wiki.archlinux.org/index.php/NV … grated_GPU. But I now have no sound. I am almost certain that this is because there is an in-built sound card that I have now blacklisted because before I blacklisted those modules sound seemed to be working fine.
I'm not sure of any great diagnostics tools for sound but speaker-test outputs:
speaker-test 1.0.27.2
Playback device is default
Stream parameters are 48000Hz, S16_LE, 1 channels
Using 16 octaves of pink noise
ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave
Playback open error: -2,No such file or directory
And aplay -l outputs:
**** List of PLAYBACK Hardware Devices ****
card 0: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: NVidia [HDA NVidia], device 7: HDMI 1 [HDMI 1]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: ICH5 [Intel ICH5], device 0: Intel ICH [Intel ICH5]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: ICH5 [Intel ICH5], device 4: Intel ICH - IEC958 [Intel ICH5 - IEC958]
Subdevices: 1/1
Subdevice #0: subdevice #0
If anyone has any ideas on how I could go about fixing this or what I can try playing with I would very thankful.
--nontlikeuname
Last edited by nontlikeuname (2014-12-30 19:45:40)

That hasn't work but I'm not sure whether I did it properly.
I did cat /proc/asound/modules:
0 snd_hda_intel
1 snd_intel8x0
and set /etc/modprobe.d/alsa-base.conf to
options snd slots=snd_hda_intel,snd_intel8x0
options snd_hda_intel=0
options snd_intel8x0=1
I'm not sure if its of any use but lsmod | grep '^snd' | column -t ouput:
snd_hda_codec_hdmi 32723 1
snd_hda_intel 31703 1
snd_intel8x0 23593 1
snd_ac97_codec 89368 1 snd_intel8x0
snd_hda_codec 129306 2 snd_hda_codec_hdmi,snd_hda_intel
snd_hwdep 4746 1 snd_hda_codec
snd_pcm 64085 5 snd_ac97_codec,snd_intel8x0,snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
snd_page_alloc 6102 3 snd_intel8x0,snd_pcm,snd_hda_intel
snd_timer 14974 1 snd_pcm
snd 44446 12 snd_ac97_codec,snd_intel8x0,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_hda_codec,snd_hda_intel
Last edited by nontlikeuname (2014-03-24 20:17:05)

Can not start x after installing nvidia 173.14.x drivers [SOLVED]

After installing nvidia-beta (version 173.14.05-5) I am unable to start x. I receive the errors:
(EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device PCI:1:0:0.
(EE) NVIDIA(0): Please see the COMMON PROBLEMS section in the README for
(EE) NVIDIA(0): additional information.
(EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device!
I have tried the installer directly from nVidia itself and I receive the same results. Any help is appreciated. Thanks.
Last edited by vytalelementz (2008-08-26 16:11:11)

nvidia-utils-beta was installed, also my GPU is listed as supported on nvidia's site.
Here's the whole xorg log file just in case:
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.4.0.90
Release Date: 5 September 2007
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.25-ARCH i686
Current Operating System: Linux ve1.vytalworld.org 2.6.25-ARCH #1 SMP PREEMPT Fri May 16 14:52:43 CEST 2008 i686
Build Date: 22 May 2008 06:09:07PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Jun 2 13:29:09 2008
(==) Using config file: "/etc/X11/XF86Config"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Device0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Mouse0"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(**) RgbPath set to "/usr/lib/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x81e0900
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 2.0
X.Org XInput driver : 2.0
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(--) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 10de,005e card 147b,1c12 rev a3 class 05,80,00 hdr 00
(II) PCI: 00:01:0: chip 10de,0050 card 147b,1c12 rev a3 class 06,01,00 hdr 80
(II) PCI: 00:01:1: chip 10de,0052 card 147b,1c12 rev a2 class 0c,05,00 hdr 80
(II) PCI: 00:02:0: chip 10de,005a card 147b,1c12 rev a2 class 0c,03,10 hdr 80
(II) PCI: 00:02:1: chip 10de,005b card 147b,1c12 rev a3 class 0c,03,20 hdr 80
(II) PCI: 00:04:0: chip 10de,0059 card 147b,1c12 rev a2 class 04,01,00 hdr 00
(II) PCI: 00:06:0: chip 10de,0053 card f47b,1c12 rev a2 class 01,01,8a hdr 00
(II) PCI: 00:07:0: chip 10de,0054 card 147b,1c12 rev a3 class 01,01,85 hdr 00
(II) PCI: 00:08:0: chip 10de,0055 card 147b,1c12 rev a3 class 01,01,85 hdr 00
(II) PCI: 00:09:0: chip 10de,005c card 0000,0000 rev a2 class 06,04,01 hdr 01
(II) PCI: 00:0a:0: chip 10de,0057 card 147b,1c12 rev a3 class 06,80,00 hdr 00
(II) PCI: 00:0b:0: chip 10de,005d card 0000,0000 rev a3 class 06,04,00 hdr 01
(II) PCI: 00:0c:0: chip 10de,005d card 0000,0000 rev a3 class 06,04,00 hdr 01
(II) PCI: 00:0d:0: chip 10de,005d card 0000,0000 rev a3 class 06,04,00 hdr 01
(II) PCI: 00:0e:0: chip 10de,005d card 0000,0000 rev a3 class 06,04,00 hdr 01
(II) PCI: 00:18:0: chip 1022,1100 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:1: chip 1022,1101 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:2: chip 1022,1102 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:3: chip 1022,1103 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 01:00:0: chip 10de,0291 card 3842,c564 rev a1 class 03,00,00 hdr 00
(II) PCI: 05:07:0: chip 104c,8023 card 147b,1c12 rev 00 class 0c,00,10 hdr 00
(II) PCI: End of PCI scan
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:1:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 5: bridge is at (0:9:0), (0,5,5), BCTRL: 0x0204 (VGA_EN is cleared)
(II) Bus 5 I/O range:
[0] -1 0 0x00009000 - 0x000090ff (0x100) IX[b]
[1] -1 0 0x00009400 - 0x000094ff (0x100) IX[b]
[2] -1 0 0x00009800 - 0x000098ff (0x100) IX[b]
[3] -1 0 0x00009c00 - 0x00009cff (0x100) IX[b]
(II) Bus 5 non-prefetchable memory range:
[0] -1 0 0xfea00000 - 0xfeafffff (0x100000) MX[b]
(II) Bus 5 prefetchable memory range:
[0] -1 0 0xfe900000 - 0xfe9fffff (0x100000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 4: bridge is at (0:11:0), (0,4,4), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 4 I/O range:
[0] -1 0 0x00006000 - 0x000060ff (0x100) IX[b]
[1] -1 0 0x00006400 - 0x000064ff (0x100) IX[b]
[2] -1 0 0x00006800 - 0x000068ff (0x100) IX[b]
[3] -1 0 0x00006c00 - 0x00006cff (0x100) IX[b]
(II) Bus 4 non-prefetchable memory range:
[0] -1 0 0xfe500000 - 0xfe5fffff (0x100000) MX[b]
(II) Bus 4 prefetchable memory range:
[0] -1 0 0xfe400000 - 0xfe4fffff (0x100000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 3: bridge is at (0:12:0), (0,3,3), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 3 I/O range:
[0] -1 0 0x00007000 - 0x000070ff (0x100) IX[b]
[1] -1 0 0x00007400 - 0x000074ff (0x100) IX[b]
[2] -1 0 0x00007800 - 0x000078ff (0x100) IX[b]
[3] -1 0 0x00007c00 - 0x00007cff (0x100) IX[b]
(II) Bus 3 non-prefetchable memory range:
[0] -1 0 0xfe700000 - 0xfe7fffff (0x100000) MX[b]
(II) Bus 3 prefetchable memory range:
[0] -1 0 0xfe600000 - 0xfe6fffff (0x100000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:13:0), (0,2,2), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x00008000 - 0x000080ff (0x100) IX[b]
[1] -1 0 0x00008400 - 0x000084ff (0x100) IX[b]
[2] -1 0 0x00008800 - 0x000088ff (0x100) IX[b]
[3] -1 0 0x00008c00 - 0x00008cff (0x100) IX[b]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xfe300000 - 0xfe3fffff (0x100000) MX[b]
(II) Bus 2 prefetchable memory range:
[0] -1 0 0xfe800000 - 0xfe8fffff (0x100000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:14:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[b]
[1] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX[b]
[2] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[b]
[3] -1 0 0x0000ac00 - 0x0000acff (0x100) IX[b]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xfc000000 - 0xfdffffff (0x2000000) MX[b]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xb0000000 - 0xcfffffff (0x20000000) MX[b]
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:24:0), (0,0,5), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(--) PCI:*(1:0:0) nVidia Corporation G71 [GeForce 7900 GT/GTO] rev 161, Mem @ 0xfc000000/24, 0xb0000000/28, 0xfd000000/24, I/O @ 0xac00/7
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) Active PCI resource ranges:
[0] -1 0 0xfeaf8000 - 0xfeafbfff (0x4000) MX[b]
[1] -1 0 0xfeaff000 - 0xfeaff7ff (0x800) MX[b]
[2] -1 0 0xfebff000 - 0xfebfffff (0x1000) MX[b]
[3] -1 0 0xfebfe000 - 0xfebfefff (0x1000) MX[b]
[4] -1 0 0xfebfd000 - 0xfebfdfff (0x1000) MX[b]
[5] -1 0 0xfebfc000 - 0xfebfcfff (0x1000) MX[b]
[6] -1 0 0xfebf9000 - 0xfebf90ff (0x100) MX[b]
[7] -1 0 0xfebfa000 - 0xfebfafff (0x1000) MX[b]
[8] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[b](B)
[9] -1 0 0xb0000000 - 0xbfffffff (0x10000000) MX[b](B)
[10] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[b](B)
[11] -1 0 0x0000fc00 - 0x0000fc07 (0x8) IX[b]
[12] -1 0 0x0000e800 - 0x0000e80f (0x10) IX[b]
[13] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
[14] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
[15] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
[16] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
[17] -1 0 0x0000d400 - 0x0000d40f (0x10) IX[b]
[18] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
[19] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
[20] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
[21] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
[22] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[b]
[23] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[b]
[24] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[b]
[25] -1 0 0x00001c40 - 0x00001c7f (0x40) IX[b]
[26] -1 0 0x00001c00 - 0x00001c3f (0x40) IX[b]
[27] -1 0 0x0000bc00 - 0x0000bc1f (0x20) IX[b]
[28] -1 0 0x0000ac00 - 0x0000ac7f (0x80) IX[b](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xfeaf8000 - 0xfeafbfff (0x4000) MX[b]
[1] -1 0 0xfeaff000 - 0xfeaff7ff (0x800) MX[b]
[2] -1 0 0xfebff000 - 0xfebfffff (0x1000) MX[b]
[3] -1 0 0xfebfe000 - 0xfebfefff (0x1000) MX[b]
[4] -1 0 0xfebfd000 - 0xfebfdfff (0x1000) MX[b]
[5] -1 0 0xfebfc000 - 0xfebfcfff (0x1000) MX[b]
[6] -1 0 0xfebf9000 - 0xfebf90ff (0x100) MX[b]
[7] -1 0 0xfebfa000 - 0xfebfafff (0x1000) MX[b]
[8] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[b](B)
[9] -1 0 0xb0000000 - 0xbfffffff (0x10000000) MX[b](B)
[10] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[b](B)
[11] -1 0 0x0000fc00 - 0x0000fc07 (0x8) IX[b]
[12] -1 0 0x0000e800 - 0x0000e80f (0x10) IX[b]
[13] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
[14] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
[15] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
[16] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
[17] -1 0 0x0000d400 - 0x0000d40f (0x10) IX[b]
[18] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
[19] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
[20] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
[21] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
[22] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[b]
[23] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[b]
[24] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[b]
[25] -1 0 0x00001c40 - 0x00001c7f (0x40) IX[b]
[26] -1 0 0x00001c00 - 0x00001c3f (0x40) IX[b]
[27] -1 0 0x0000bc00 - 0x0000bc1f (0x20) IX[b]
[28] -1 0 0x0000ac00 - 0x0000ac7f (0x80) IX[b](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xfeaf8000 - 0xfeafbfff (0x4000) MX[b]
[5] -1 0 0xfeaff000 - 0xfeaff7ff (0x800) MX[b]
[6] -1 0 0xfebff000 - 0xfebfffff (0x1000) MX[b]
[7] -1 0 0xfebfe000 - 0xfebfefff (0x1000) MX[b]
[8] -1 0 0xfebfd000 - 0xfebfdfff (0x1000) MX[b]
[9] -1 0 0xfebfc000 - 0xfebfcfff (0x1000) MX[b]
[10] -1 0 0xfebf9000 - 0xfebf90ff (0x100) MX[b]
[11] -1 0 0xfebfa000 - 0xfebfafff (0x1000) MX[b]
[12] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[b](B)
[13] -1 0 0xb0000000 - 0xbfffffff (0x10000000) MX[b](B)
[14] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[b](B)
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[17] -1 0 0x0000fc00 - 0x0000fc07 (0x8) IX[b]
[18] -1 0 0x0000e800 - 0x0000e80f (0x10) IX[b]
[19] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
[20] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
[21] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
[22] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
[23] -1 0 0x0000d400 - 0x0000d40f (0x10) IX[b]
[24] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
[25] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
[26] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
[27] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
[28] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[b]
[29] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[b]
[30] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[b]
[31] -1 0 0x00001c40 - 0x00001c7f (0x40) IX[b]
[32] -1 0 0x00001c00 - 0x00001c3f (0x40) IX[b]
[33] -1 0 0x0000bc00 - 0x0000bc1f (0x20) IX[b]
[34] -1 0 0x0000ac00 - 0x0000ac7f (0x80) IX[b](B)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.4.0.90, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 173.14.05 Mon May 19 00:30:52 PDT 2008
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.3
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) NVIDIA dlloader X Driver 173.14.05 Mon May 19 00:10:20 PDT 2008
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset NVIDIA GPU found
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules//libwfb.so
(II) Module wfb: vendor="NVIDIA Corporation"
compiled for 7.1.99.2, module version = 1.0.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xfeaf8000 - 0xfeafbfff (0x4000) MX[b]
[5] -1 0 0xfeaff000 - 0xfeaff7ff (0x800) MX[b]
[6] -1 0 0xfebff000 - 0xfebfffff (0x1000) MX[b]
[7] -1 0 0xfebfe000 - 0xfebfefff (0x1000) MX[b]
[8] -1 0 0xfebfd000 - 0xfebfdfff (0x1000) MX[b]
[9] -1 0 0xfebfc000 - 0xfebfcfff (0x1000) MX[b]
[10] -1 0 0xfebf9000 - 0xfebf90ff (0x100) MX[b]
[11] -1 0 0xfebfa000 - 0xfebfafff (0x1000) MX[b]
[12] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[b](B)
[13] -1 0 0xb0000000 - 0xbfffffff (0x10000000) MX[b](B)
[14] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[b](B)
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[17] -1 0 0x0000fc00 - 0x0000fc07 (0x8) IX[b]
[18] -1 0 0x0000e800 - 0x0000e80f (0x10) IX[b]
[19] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
[20] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
[21] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
[22] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
[23] -1 0 0x0000d400 - 0x0000d40f (0x10) IX[b]
[24] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
[25] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
[26] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
[27] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
[28] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[b]
[29] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[b]
[30] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[b]
[31] -1 0 0x00001c40 - 0x00001c7f (0x40) IX[b]
[32] -1 0 0x00001c00 - 0x00001c3f (0x40) IX[b]
[33] -1 0 0x0000bc00 - 0x0000bc1f (0x20) IX[b]
[34] -1 0 0x0000ac00 - 0x0000ac7f (0x80) IX[b](B)
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xfeaf8000 - 0xfeafbfff (0x4000) MX[b]
[5] -1 0 0xfeaff000 - 0xfeaff7ff (0x800) MX[b]
[6] -1 0 0xfebff000 - 0xfebfffff (0x1000) MX[b]
[7] -1 0 0xfebfe000 - 0xfebfefff (0x1000) MX[b]
[8] -1 0 0xfebfd000 - 0xfebfdfff (0x1000) MX[b]
[9] -1 0 0xfebfc000 - 0xfebfcfff (0x1000) MX[b]
[10] -1 0 0xfebf9000 - 0xfebf90ff (0x100) MX[b]
[11] -1 0 0xfebfa000 - 0xfebfafff (0x1000) MX[b]
[12] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[b](B)
[13] -1 0 0xb0000000 - 0xbfffffff (0x10000000) MX[b](B)
[14] -1 0 0xfc000000 - 0xfcffffff (0x1000000) MX[b](B)
[15] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[16] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[17] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[19] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[20] -1 0 0x0000fc00 - 0x0000fc07 (0x8) IX[b]
[21] -1 0 0x0000e800 - 0x0000e80f (0x10) IX[b]
[22] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
[23] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
[24] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
[25] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
[26] -1 0 0x0000d400 - 0x0000d40f (0x10) IX[b]
[27] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
[28] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
[29] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
[30] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
[31] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[b]
[32] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[b]
[33] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[b]
[34] -1 0 0x00001c40 - 0x00001c7f (0x40) IX[b]
[35] -1 0 0x00001c00 - 0x00001c3f (0x40) IX[b]
[36] -1 0 0x0000bc00 - 0x0000bc1f (0x20) IX[b]
[37] -1 0 0x0000ac00 - 0x0000ac7f (0x80) IX[b](B)
[38] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[39] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0): enabled.
(EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device PCI:1:0:0.
(EE) NVIDIA(0): Please see the COMMON PROBLEMS section in the README for
(EE) NVIDIA(0): additional information.
(EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device!
(II) UnloadModule: "nvidia"
(II) UnloadModule: "wfb"
(II) UnloadModule: "fb"
(EE) Screen(s) found, but none have a usable configuration.
Fatal server error:
no screens found

Lenovo G510 BSOD on Windows 7 after installing RST Driver

Hello,
I was hoping to figure this out without having to post but unfortunately I cannot seem to get around the problem. I purchased my laptop (Lenovo G510) last month and immediately upgraded to a SSD and then downgraded to Windows 7. There have been no problems until I was installing the Intel Rapid Storage Technology Driver (Link to Driver).
After installing the driver and rebooting I get the BSOD at the main Windows login screen in any of the boot modes (Regular, Safe, Safe with Network, and Safe with Command). The error dump shows that the issue is linked to itaStorF.sys. Normally I would not need this driver installed and I would just use the Windows generic driver but I have decided to replace the ODD with a HDD Caddy with the 1TB HDD that came with the laptop.
I have seen others say that they have used a HDD Caddy with no issues but I get the BSOD error with this driver even before I installed the Caddy. I can install a more up to date driver from Intel but they eject the HDD Caddy when it is detected and they are meant for Windows 8.
I can provide more information if needed as well as error logs. I would greatly appreciate the help from the community! Thanks!
Quick Computer Info:
OS: Windows 7 Professional
SSD: Crucial M550
HDD: Western Digital WD10JPCX
HDDCaddy: Link to Caddy page
Edit:
For some additional information, I have done each of the lenovo diagnostic tests, check disks, and memory tests which all came back as healthy.

The issue seem unrelated to the Instant Client. (Looks like you installed from the "full" Database Client product.)
Anyway, is that Windows 7 64-bit? Then, possibly, the software you installed was 32-bit and the driver shows up in the 32-bit MS ODBC admin tool (in wow64 subsystem, for 32-bit apps).

Can't install nvidia driver on V580

Hello!
I try install nvidia driver on my V580a (Intel driver is already installed and all work fine) but after I install optimus drivers in device manager (win 7 x64) i see that (standard vga device). Then I try install nvidia drivers for my gt 645 but from nvidia site but he fails.
So how can I installl right driver so my discrete video card woud be recognized in device manager?
And must I install driver for GT 645M or I must install only optimus driver?
Thanks

Hi Alex,
please see this NVIDIA driver install thread...
https://forums.lenovo.com/t5/IdeaPad-Y-U-V-Z-and-P-series/NVIDIA-GT-630M-2GB-driver-installation-pro...
Zehn

Error HTTP Status 500 after installing DS Management Console and IPS Services on BI Enterprise Server

The following error
HTTP Status 500 - while trying to invoke the method java.util.Properties.entrySet() of an object loaded from local variable 'globalProperties'
occurred after installing DS Management Console and IPS Services on BI Enterprise Server
BI Enterprise Edition 4.1 SP1 and BODS 4.1 SP1

Hi,
If you can't see the login screen of the CMC then it's a problem of webapps and not EIM services.
Try cleaning the Tomcat cache for the BOE webapps and let Tomcat re cache it. Often it does the job.
- Stop Tomcat
- Rename the BOE folder to BOE-OLD in C:\Program Files (x86)\SAP BusinessObjects\tomcat\work\Catalina\localhost\
- Start Tomcat
When the Tomcat process in task manager is done working (it can take 10-20 min+) then try again.
When you're done, you can delete the BOE-OLD folder.
Let me know!

HT6114 My Macbook is running very slowly after installating mavericks. Could anyone help?

My Macbook is running very slowly after installating mavericks. Could anyone help?

OS X Mavericks: If your Mac runs slowly?
Spotlight indexing make computer run slowly after a fresh installation of OS X.
http://support.apple.com/kb/PH13895
Startup in Safe Mode
http://support.apple.com/kb/PH14204
Repair Disk
Steps 1 through 7
http://support.apple.com/kb/PH5836
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Increase disk space.
http://support.apple.com/kb/PH13806
Run EtreCheck and remove MacKeeper, CleanMyMac Norton Security, other third party aps,etc
if you have installed those applications.
https://discussions.apple.com/docs/DOC-6173

"dependency cycle detected" warnings when installing nvidia driver

I'm getting two "dependency cycle detected" warnings when installing nvidia driver on a fresh arch system:
xorg-server will be installed before its nvidia-libgl dependency
harfbuzz will be installed before its freetype2 dependency
Is that normal?

It's not 'normal' but if everything is working fine, no need to worry. They're just warnings, not errors.

Nvidia is not working after upgrading nvidia driver and kernel

I upgraded nvidia driver and kernel. After rebooting graphic mode is not working. Here xorg.o.log
[ 281.180]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 281.181]
X.Org X Server 1.10.0.902 (1.10.1 RC 2)
Release Date: 2011-04-08
[ 281.181] X Protocol Version 11, Revision 0
[ 281.181] Build Operating System: Linux 2.6.38-ARCH i686
[ 281.181] Current Operating System: Linux localhost 2.6.38-ARCH #1 SMP PREEMPT Wed Mar 30 07:14:27 UTC 2011 i686
[ 281.181] Kernel command line: BOOT_IMAGE=/boot/vmlinuz26 root=/dev/disk/by-uuid/b766e332-2aad-4047-8562-567180150189 ro quiet
[ 281.182] Build Date: 11 April 2011 10:49:12AM
[ 281.182]
[ 281.182] Current version of pixman: 0.20.2
[ 281.182] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 281.182] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 281.183] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Apr 14 17:11:37 2011
[ 281.183] (==) Using config file: "/etc/X11/xorg.conf"
[ 281.183] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 281.183] (==) ServerLayout "Layout0"
[ 281.183] (**) |-->Screen "Screen0" (0)
[ 281.183] (**) | |-->Monitor "Monitor0"
[ 281.184] (**) | |-->Device "Videocard0"
[ 281.184] (**) |-->Input Device "Keyboard0"
[ 281.184] (**) |-->Input Device "Mouse0"
[ 281.184] (**) Option "Xinerama" "0"
[ 281.184] (==) Automatically adding devices
[ 281.184] (==) Automatically enabling devices
[ 281.184] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 281.184] Entry deleted from font path.
[ 281.184] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 281.184] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 281.184] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 281.184] (WW) Disabling Keyboard0
[ 281.184] (WW) Disabling Mouse0
[ 281.184] (II) Loader magic: 0x822e120
[ 281.184] (II) Module ABI versions:
[ 281.184] X.Org ANSI C Emulation: 0.4
[ 281.184] X.Org Video Driver: 10.0
[ 281.184] X.Org XInput driver : 12.2
[ 281.184] X.Org Server Extension : 5.0
[ 281.185] (--) PCI:*(0:1:0:0) 10de:0322:0000:0000 rev 161, Mem @ 0xfd000000/16777216, 0xe8000000/134217728, BIOS @ 0x????????/131072
[ 281.185] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 281.185] (II) LoadModule: "extmod"
[ 281.185] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 281.185] (II) Module extmod: vendor="X.Org Foundation"
[ 281.185] compiled for 1.10.0.902, module version = 1.0.0
[ 281.185] Module class: X.Org Server Extension
[ 281.185] ABI class: X.Org Server Extension, version 5.0
[ 281.185] (II) Loading extension MIT-SCREEN-SAVER
[ 281.185] (II) Loading extension XFree86-VidModeExtension
[ 281.185] (II) Loading extension XFree86-DGA
[ 281.185] (II) Loading extension DPMS
[ 281.185] (II) Loading extension XVideo
[ 281.185] (II) Loading extension XVideo-MotionCompensation
[ 281.185] (II) Loading extension X-Resource
[ 281.185] (II) LoadModule: "dbe"
[ 281.185] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 281.185] (II) Module dbe: vendor="X.Org Foundation"
[ 281.185] compiled for 1.10.0.902, module version = 1.0.0
[ 281.185] Module class: X.Org Server Extension
[ 281.185] ABI class: X.Org Server Extension, version 5.0
[ 281.185] (II) Loading extension DOUBLE-BUFFER
[ 281.185] (II) LoadModule: "glx"
[ 281.186] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 281.216] (II) Module glx: vendor="NVIDIA Corporation"
[ 281.217] compiled for 4.0.2, module version = 1.0.0
[ 281.217] Module class: X.Org Server Extension
[ 281.217] (II) NVIDIA GLX Module 173.14.28 Wed Sep 29 10:17:05 PDT 2010
[ 281.217] (II) Loading extension GLX
[ 281.217] (II) LoadModule: "record"
[ 281.217] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 281.217] (II) Module record: vendor="X.Org Foundation"
[ 281.217] compiled for 1.10.0.902, module version = 1.13.0
[ 281.217] Module class: X.Org Server Extension
[ 281.217] ABI class: X.Org Server Extension, version 5.0
[ 281.217] (II) Loading extension RECORD
[ 281.217] (II) LoadModule: "dri"
[ 281.217] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 281.217] (II) Module dri: vendor="X.Org Foundation"
[ 281.217] compiled for 1.10.0.902, module version = 1.0.0
[ 281.217] ABI class: X.Org Server Extension, version 5.0
[ 281.217] (II) Loading extension XFree86-DRI
[ 281.217] (II) LoadModule: "dri2"
[ 281.217] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 281.218] (II) Module dri2: vendor="X.Org Foundation"
[ 281.218] compiled for 1.10.0.902, module version = 1.2.0
[ 281.218] ABI class: X.Org Server Extension, version 5.0
[ 281.218] (II) Loading extension DRI2
[ 281.218] (II) LoadModule: "nvidia"
[ 281.218] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 281.218] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 281.218] compiled for 4.0.2, module version = 1.0.0
[ 281.218] Module class: X.Org Video Driver
[ 281.218] ================ WARNING WARNING WARNING WARNING ================
[ 281.219] This server has a video driver ABI version of 10.0 that is not
supported by this NVIDIA driver. Please check
http://www.nvidia.com/ for driver updates or downgrade to an X
server with a supported driver ABI.
[ 281.219] =================================================================
[ 281.219] (II) NVIDIA dlloader X Driver 173.14.28 Wed Sep 29 09:55:18 PDT 2010
[ 281.219] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 281.219] (--) using VT number 7
[ 281.222] (II) Loading sub module "fb"
[ 281.222] (II) LoadModule: "fb"
[ 281.222] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 281.222] (II) Module fb: vendor="X.Org Foundation"
[ 281.222] compiled for 1.10.0.902, module version = 1.0.0
[ 281.222] ABI class: X.Org ANSI C Emulation, version 0.4
[ 281.222] (II) Loading sub module "wfb"
[ 281.222] (II) LoadModule: "wfb"
[ 281.222] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 281.223] (II) Module wfb: vendor="X.Org Foundation"
[ 281.223] compiled for 1.10.0.902, module version = 1.0.0
[ 281.223] ABI class: X.Org ANSI C Emulation, version 0.4
[ 281.223] (II) Loading sub module "ramdac"
[ 281.223] (II) LoadModule: "ramdac"
[ 281.223] (II) Module "ramdac" already built-in
[ 281.223] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 281.226] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 281.226] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 281.226] (II) UnloadModule: "nvidia"
[ 281.226] (II) Unloading nvidia
[ 281.226] (II) UnloadModule: "wfb"
[ 281.226] (II) Unloading wfb
[ 281.226] (II) UnloadModule: "fb"
[ 281.226] (II) Unloading fb
[ 281.226] (EE) Screen(s) found, but none have a usable configuration.
[ 281.226]
Fatal server error:
[ 281.226] no screens found
[ 281.226]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 281.226] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 281.226]

bilgee0629 wrote:
Arjann wrote:
I think the new xorg-server is the problem as it isn't supported by this nvidia driver yet.
You could try to install the nouveau driver until nvidia comes with a new version of the 173 branch that supports xorg-server 1.10, see: https://wiki.archlinux.org/index.php/Nouveau for information. As lower-grade options, you might also consider xf86-video-nv and xf86-video-vesa.
Should i uninstall nvidia driver, then install it?
I think thats the easy way yes, else you have to blacklist the nvidia kernel module.. check the wiki link of nouveau for details.

No sound after installing nvidia graphics card

Hello Archlinux Forum this is my first time Posting!
After i upgraded my GPU from my amd apu to the Asus strix geforce gtx 960 and installed the nvidia driver I am not getting sound output not on pulseaudio or alsa directly.
output of aplay -l :
**** List of PLAYBACK Hardware Devices ****
card 0: Generic [HD-Audio Generic], device 0: ALC887-VD Analog [ALC887-VD Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 7: HDMI 1 [HDMI 1]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 8: HDMI 2 [HDMI 2]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 9: HDMI 3 [HDMI 3]
Subdevices: 1/1
Subdevice #0: subdevice #0
Thank you for your help in advance.
~~~Markuski
Last edited by markuski (2015-02-18 20:25:36)

I guess your audio is just muted? For alsa you may unmute the channels with alsamixer or
amixer set Master,0 75% unmute
amixer set PCM,0 75% unmute
and in case of pulseaudio you can install and use something like pavucontrol.
Furthermore, rtfwiki .

[Solved] Can't install Nvidia driver: Mesa-libgl conflict

I just finished installing my first GUI, KDE to be exact, on Arch Linux. Right now, I'm using the nouveau driver but I want to unlock the full power of my GTX 780 with proprietary nvidia drivers. On my last attempt at installing KDE, I went directly to installing the nvidia driver 304.24. After rebooting and seeing some text flash on screen, however, I was meant with only a black screen. I could still type, login and reboot but not much more since I couldn't see. I tried booting into the Arch Linux fallback GRUB provided for me with no prevail so I decided to just reinstall the OS. For that reason, I want to install this nvidia driver in hopes of being able to avoid another blank screen. So far, I have this:
[root@arch /]# pacman -S nvidia
resolving dependencies...
looking for inter-conflicts...
:: nvidia-libgl and mesa-libgl are in conflict (libgl). Remove mesa-libgl? [y/N] y
error: failed to prepare transaction (could not satisfy dependencies)
:: nouveau-dri: requires mesa-libgl
I've tried looking across the forums for similar problems and even tried to uninstall mesa-libgl and all its dependencies but it just yields this:
[root@arch /]# pacman -Rns mesa-libgl
checking dependencies...
error: failed to prepare transaction (could not satisfy dependencies)
:: cairo: requires libgl
:: glu: requires libgl
:: libva: requires libgl
:: mplayer: requires libgl
:: nouveau-dri: requires mesa-libgl
:: qt4: requires libgl
:: qt5-base: requires libgl
I feel like I might need to uninstall the nouveau driver so as to be able to uninstall mesa-libgl. If I installed the nvidia driver at that point, I fear I might see the blank screen again. Thanks for your help in advance.
Last edited by Firephyz (2014-07-19 20:04:11)

Firephyz wrote:
I just finished installing my first GUI, KDE to be exact, on Arch Linux. Right now, I'm using the nouveau driver but I want to unlock the full power of my GTX 780 with proprietary nvidia drivers. On my last attempt at installing KDE, I went directly to installing the nvidia driver 304.24. After rebooting and seeing some text flash on screen, however, I was meant with only a black screen. I could still type, login and reboot but not much more since I couldn't see. I tried booting into the Arch Linux fallback GRUB provided for me with no prevail so I decided to just reinstall the OS. For that reason, I want to install this nvidia driver in hopes of being able to avoid another blank screen. So far, I have this:
[root@arch /]# pacman -S nvidia
resolving dependencies...
looking for inter-conflicts...
:: nvidia-libgl and mesa-libgl are in conflict (libgl). Remove mesa-libgl? [y/N] y
error: failed to prepare transaction (could not satisfy dependencies)
:: nouveau-dri: requires mesa-libgl
I've tried looking across the forums for similar problems and even tried to uninstall mesa-libgl and all its dependencies but it just yields this:
[root@arch /]# pacman -Rns mesa-libgl
checking dependencies...
error: failed to prepare transaction (could not satisfy dependencies)
:: cairo: requires libgl
:: glu: requires libgl
:: libva: requires libgl
:: mplayer: requires libgl
:: nouveau-dri: requires mesa-libgl
:: qt4: requires libgl
:: qt5-base: requires libgl
I feel like I might need to uninstall the nouveau driver so as to be able to uninstall mesa-libgl. If I installed the nvidia driver at that point, I fear I might see the blank screen again. Thanks for your help in advance.
You do it wrong.
sudo pacman -Rdd mesa-libgl && sudo pacman -S nvidia
After it, you can decide if you want to reinstall mesa-libgl and remove nvidia-libgl or leave nvidia-libgl and do not install mesa-libgl. I do it all the time during update.
Last edited by firekage (2014-07-19 19:48:30)

Expansion Slot Fan running at high speed after installing NVIDIA Quadro 4000

I've noticed that after installing the new NVIDIA Quadro 4000 for Mac on my Mac Pro with Mac OS X 10.6.7 with the newly released NVIDIA drivers (03/22/2011) the Expansion Slot Fan is running at a VERY HIGH speed (between 1,200rpm and 2,100rpm), if I go back the the NVIDIA GT120 everything will be normal with the Fan speed (around 800rpm), does enybody have experienced the same issue ?, thanks

Sorry, that I can’t really offer much help...
Did you install the latest “standalone” driver update...?
Should be currently: GPU “256.01.00f03v7”... CUDA “4.0.14".
The driver has to be present before the card is installed...
Check your latest Mac Pro EFI Firmware update... should be version 1.4.
Run a general maintenance utility like, OnyX, Cocktail, TechTool Pro, Disk Warrior etc.
Restart your system...

After installing Nvidia Driver, console broken... help

Similar Messages

Maybe you are looking for