After installing oracle 10g on linux im getting this error

Hi,
Can any one give me any solution on i getting an error after installing oracle 10g on linux.
ERROR:-
/oraeng/app/oracle/product/10.2.0/bin/clscfg: error while loading shared libraries: libclntsh.so.10.1: cannot open shared object file: No such file or directory
Failed to initialize Oracle Cluster Registry for cluster

Hi, please ensure that both 'libclntsh.so.10.1' and 'libttsh10.so' has 755 permission and owned by Oracle.
That is the critical step.
After re-execute the root.sh file
Has been known to reset the permissions from the previous step - bug in some patch releases.
Suggest OP records permissions for those two files before running root.sh Or run root.sh before setting the permissions.

Similar Messages

After installing a iTune upgrade I'm getting this error message

iTunes could not connect to the iTune store. Make sure your network connection is active and try again.
Anyone have any ideas?

Are you running any of Symantec's (Norton) or McAfee's Internet security products or anything similar, or an antivirus/antispyware application? There have been reports that some such utilities treat an upgrade to iTunes as a new application and can block the application from connecting. So you have to go in and reset the utility to allow iTunes. The same thing can happen if you upgrade the security product (this has particularly been a problem with recent McAfee upgrades).
Check the settings for your utility. If iTunes is still listed, remove and re-enable the exception for iTunes. Consult your utility's documentation for the appropriate procedure; you can find instructions for Norton on Symantec's web page for iTunes. You may also need to check the built-in Windows firewall as well.
Hope this helps.

Oui-10207error while installing oracle 10g on linux in vmware

Hi,
I have installed vmware on windows 7(64 bit) on which i have installed Oracle Enterprise linux 5. I have set all the variables correctly. but when i try to install oracle 10g on linux, i get the error
OUI-10207:there is not enough disk space in the OUI swap area /tmp/OraInstall2011-10-17_03-44-48PM.Please make atleast 529KB of space avaivale and retry.
but i have around 95bg of space. My partitions are as follows
Device Boot Start End Blocks Id System
/dev/sda1 * 1 12551 100815876 83 linux
/dev/sda2 12552 13041 3935925 82 Linux swap/solaris
/dev/sda3 13042 13054 104422+ 83 linux
Please help me in solving the problem.
Thanks
Viraj

What is your swap size? try to increase size
execute below command on terminal, paste result here.
#swapon -s
#free
Tips : how to increase swap space
http://hackertrip.wordpress.com/2011/09/11/increase-swap-space/

After installing PDK-URL sample I am getting an error

After installing PDK-URL sample I am getting this error
Error!
javax.servlet.ServletException:
Unable to find Provider class oracle.portal.provider.v1.http.URLProvider
Hi I am getting this error after installing JPDK-URL and I when I try to run urlsample.
I have used the exact steps mentioned in the installation document.
Thanks.

Narayana,
Apache JServ will not take files from system class path. This information is to be given in jserv.properties through wrapper.classpath. It is much similar to how we install JPDK. I guess you have added urlservices.jar to the classpath using the above method.
Thanks,
Amjad.

How can i install oracle 10g on linux cluster

Dear all:
please advice How can i install oracle 10g on linux cluster service ..
thanks ,,

Without RAC, you can only have one instance manage the database. One instance = one set of processes communicating via IPC.
Unless you know of a way to have processes use memory-based IPC across nodes, you need to pick a node and install & run the database software on that node.

I want to install oracle 10g on linux.

i want to install oracle 10g on linux. my linux is red hat enterprise linux AS release 4. i downloaded 10201_database_linux_x86_64.cpio.gz. now, cksum 10201_database_linux_x86_64.cpio.gz shows 4294967295 while site says 2921604215. if i say gunzip /home/oracle/10201_database_linux_x86_64.cpio.gz gunzip: /home/oracle/10201_database_linux_x86_64.cpio.gz: unexpected end of file. now, please clear these doubts and also give me the link to steps on how to install. tnx

I tried with the following command and it works for me:
cpio -idcmv < 10*
without gzip before

My computer slows down and hangs after installing oracle 10g

My computer just slows down after installing oracle 10g. I have a pentium 4 3ghz with 512 memory (32 mb used by graphics built in card). It slows down and hanged even if I agjusted the swap memory to 800 mb. I have two swap file/page file - in drive c and drive d. I even cannot shut it down because it takes maybe 30 minutes just to see the "shut-off/log-off" screen.

Before starting up Oracle, when you go to the task manager, how much RAM does it show actually free? 512 MB is pretty small to run Oracle in the first place-- Windows and Office can use a fair chunk of RAM themselves, depending on which Office apps you are running. You may also be suprised by the amount of RAM that a web browser, email client, and the various other apps that folks generally install can use.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

Problem to install oracle 10g on linux

Hi,
I want to install Oracle 10g on Linux
(I have Linux X76CLLCFAUU 2.6.18-194.17.1.el5 #1 SMP Mon Sep 20 07:12:06 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux)
, when i run ./runInstaller, i have the following error , do you known what is the problem :
DÃ©marrage d'Oracle Universal Installer...
VÃ©rification des exigences du programme d'installation...
VÃ©rification de la version du systÃ¨me d'exploitation : il doit s'agir deredhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Echec <<<<
Fermeture d'Oracle Universal Installer ; le journal de cette session figure Ã l'emplacement /tmp/OraInstall2010-11-17_05-03-15PM/installActions2010-11-17_05-03-15PM.log

Hello,
VÃ©rification de la version du systÃ¨me d'exploitation : il doit s'agir deredhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Echec <<<<So, when the Installer checked the OS Release, it didn't find the correct one.
The message said that you should have one of this OS:
Redhat-3, SuSE-9, Redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2As previously posted, you should check from the Installation Guide that you have the right OS requirements before running the Installer.
Hope this help.
Best regards,
Jean-Valentin

I am trying to install oracle 11g xe on ubuntu aws instance when i execute sudo /etc/init.d/oracle-xe configure command iam getting this error: sudo: /etc/init.d/oracle-xe : command not found

i am trying to install oracle 11g xe on ubuntu aws instance when i execute sudo /etc/init.d/oracle-xe configure command iam getting this error: sudo: /etc/init.d/oracle-xe : command not found.

"command not found" means ... there is no such thing.
Has the .rpm been installed?
http://docs.oracle.com/cd/E17781_01/install.112/e18802/toc.htm#XEINL122

I purchased mountain lion, but after numerous attempts until my fingers all gone numb, i simply cannot install it on my imac. i get this error message: "an error occurred while installing OS X, you cannot install OS X on this disk......". please help.

I purchased mountain lion, but after numerous attempts until my fingers all gone numb, i simply cannot install it on my imac. i get this error message: "an error occurred while installing OS X, you cannot install OS X on this disk......".
please help!
imac specs:
IMAC 24 inch Mid 2007
Intel 2.4 GHz 2 duo
4GB SDRAM
OS X lion 10.7.4
200 GB Harddrive space free

Tell us more about the disk and partition onto which you are trying to install Mountain Lion:
Open Disk Utility (in Applications > Utilities). The left column should show your disk with its partition(s) indented below it:
How is the disk (top level container) formatted according to Disk Utility:
* What Partiton Map Scheme? (Should be "GUID Partition Table".)
* How many partitions? (Should be 1 unless you have a Boot Camp partition.)
How is the partition (lower level container) formatted according to Disk Utility? (Should be "Mac OS Extended (Journaled)".)
Message was edited by: markwmsn
(image inserted)

I can't install icloud on my pc i get this error:the file 'AOSKit.dll' cannot be installed because the file cannot be found in cabinet file 'iCloud.cab'

i can't install icloud on my pc i get this error:the file 'AOSKit.dll' cannot be installed because the file cannot be found in cabinet file 'iCloud.cab'.this could indicate a network error, an error reading from the CD-ROM, or a problem with this package! please help!!!!!

“the procedure entry point kCMByteStreamNotification_AvailableLengthChanged could not be located in the dynamic link library CoreMedia.dll.”
Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. Now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair".
Does iTunes launch properly now?
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post:
Re: I recently updated to vista service pack 2 and I updated to itunes

I am trying to update a number of items which the software check brings up: It runs and says it is installing but at the end I get this error message: The update could not be expanded, and may have been corrupted during downloading. The update wil

Hi,
I am trying to update a number of items which the software check brings up:
It runs and says it is installing but at the end I get this error message:
BUT then I ge tthis:
Can anyone help me to enable the software to update?
Thanks

Thanks. Something isn't right as I just tried to download the iphoto update - it said it had competed the download but then when I clicked on the download item I get this:
Think will have to take it into the store.....
thanks for replying.

Repeated ORA-12547 Messages after installing Oracle 10g

Hi,
I installed Oracle 10g on a Redhat ES 3 box, and the install went okay, but when I try and interact with the server I get the message:
ORA-12547: TNS: lost contact
For example, if I use the Database Configuration Assistant to attempt to create a database, I will see the above message when it begins the database creation process, or if I try to interact with the Oracle server using sqlplus I will see the above message after each command entered.
I had recently tried to install Oracle 8.1.7 on the same box, but abandoned that after deciding that the effort required to link Oracle 8 on RHES3 just wasn't worth it. I have been told that this previous partial installation may be the cause of the problem, and have been advised to uninstall Oracle 8, uninstall Oracle 10g, and reinstall Oracle 10g. I find it hard to believe that it would require such an action to solve this problem. Is there any configuration changes I can make to resolve it? Also, what does this message actually mean?
I am new to Oracle, so thanks for any help with this problem.
Colm.

My last message asking for a grater degree of specificity was not overly specific, hence I am posting the kernel parms that I have set with the hopes that you will spot one that I set improperly or one that I neglected to set.
[root@awyr ~]# cat /proc/sys/kernel/shmmax
2147483648
[root@awyr ~]# cat /proc/sys/kernel/shmmni
4096
[root@awyr ~]# cat /proc/sys/kernel/shmall
2097152
[root@awyr ~]# ipcs -lm |grep "min seg size"
min seg size (bytes) = 1
[root@awyr ~]# cat /proc/sys/kernel/sem | awk '{print $1}'
250
[root@awyr ~]# cat /proc/sys/kernel/sem | awk '{print $2}'
32000
[root@awyr ~]# cat /proc/sys/kernel/sem | awk '{print $3}'
100
[root@awyr ~]# cat /proc/sys/kernel/sem | awk '{print $4}'
128
[root@awyr ~]# cat /proc/sys/fs/file-max
65536
[root@awyr ~]# cat /proc/sys/net/ipv4/ip_local_port_range
1024 65000
[oracle@awyr Desktop]$ ulimit -n
63536
[oracle@awyr Desktop]$ ulimit -u
4091
[oracle@awyr Desktop]$ ulimit -a
core file size (blocks, -c) 0
data seg size (kbytes, -d) unlimited
file size (blocks, -f) unlimited
max locked memory (kbytes, -l) 32
max memory size (kbytes, -m) unlimited
open files (-n) 63536
pipe size (512 bytes, -p) 8
stack size (kbytes, -s) 8192
cpu time (seconds, -t) unlimited
max user processes (-u) 4091
virtual memory (kbytes, -v) unlimited
from sysctl -a
my fs.file-max = 65536
in my limits.conf I added:
oracle soft nofile 4096
oracle hard nofile 63536
in my (1) /etc/pam.d/system-auth (2) /etc/pam.d/sshd (3) /etc/pam.d/su (4) /etc/pam.d/login
files I added:
session required pam_limits.so
and verified that it exists
in my limits.conf I added
oracle soft nproc 2047
oracle hard nproc 16384
my /etc/oratab has:
orcl:/usr/local/oracle/app/oracle/oracle/product/10.2.0/db_1:N
I tried to change the N at the end to a Y but to no avail
my /etc/oraInst.loc has:
inventory_loc=/usr/local/oracle/app/oracle/oraInventory
inst_group=oinstall
Thanks again for your atention
Richard

Compilation Errors "skipp incompatible" installing oracle 10g on linux 64z9

Hello Friends,
I have errors while installing Oracle 10g 10.2.0 for z9 Systems on a IBM Z/OS System with a SLES 10 Linux for z9 (64bit System).
The Problem:
Some programs of oracle cause errors while compiling libraries.
The Error:
------------ With LD_LIBRARY_PATH set to $ORACLE_HOME/lib (which contains 64bit libs) -------------------
(13:54) [oracle@linux-server-LXS1] /ASLing01/opt/apps/oracle10g/app/oracle/product/10.2.0/db_1/bin
[b]> ./genclntsh
/usr/lib64/gcc/s390x-suse-linux/4.1.0/../../../../s390x-suse-linux/bin/ld: skipping incompatible /ASLing01/opt/apps/oracle10g/app/oracle/product/10.2.0/db_1/lib/stubs/libdl.so when searching for -ldl
/usr/lib64/gcc/s390x-suse-linux/4.1.0/../../../../s390x-suse-linux/bin/ld: skipping incompatible /ASLing01/opt/apps/oracle10g/app/oracle/product/10.2.0/db_1/lib/stubs/libm.so when searching for -lm
/usr/lib64/gcc/s390x-suse-linux/4.1.0/../../../../s390x-suse-linux/bin/ld: skipping incompatible /ASLing01/opt/apps/oracle10g/app/oracle/product/10.2.0/db_1/lib/stubs/libnsl.so when searching for -lnsl
/usr/lib64/gcc/s390x-suse-linux/4.1.0/../../../../s390x-suse-linux/bin/ld: skipping incompatible /ASLing01/opt/apps/oracle10g/app/oracle/product/10.2.0/db_1/lib/stubs/librt.so when searching for -lrt
/usr/lib64/gcc/s390x-suse-linux/4.1.0/../../../../s390x-suse-linux/bin/ld: /ASLing01/opt/apps/oracle10g/app/oracle/product/10.2.0/db_1/lib/libclient10.a(obindps.o): relocation R_390_PC32 against `ocibndps' can not be used when making a shared object; recompile with -fPIC
/usr/lib64/gcc/s390x-suse-linux/4.1.0/../../../../s390x-suse-linux/bin/ld: final link failed: Bad value
collect2: ld gab 1 als Ende-Status zurück
genclntsh: Failed to link libclntsh.so.10.1
------------ With LD_LIBRARY_PATH set to $ORACLE_HOME/lib32 (which contains 32bit libs) ------------------
(13:54) [oracle@linux-server-LXS1] /ASLing01/opt/apps/oracle10g/app/oracle/product/10.2.0/db_1/bin
export LD_LIBRARY_PATH=/ASLing01/opt/apps/oracle10g/app/oracle/product/10.2.0/db_1/lib32(13:54) [oracle@linux-server-LXS1] /ASLing01/opt/apps/oracle10g/app/oracle/product/10.2.0/db_1/bin
./genclntsh/usr/lib64/gcc/s390x-suse-linux/4.1.0/../../../../s390x-suse-linux/bin/ld: skipping incompatible /ASLing01/opt/apps/oracle10g/app/oracle/product/10.2.0/db_1/lib/stubs/libdl.so when searching for -ldl
/usr/lib64/gcc/s390x-suse-linux/4.1.0/../../../../s390x-suse-linux/bin/ld: skipping incompatible /ASLing01/opt/apps/oracle10g/app/oracle/product/10.2.0/db_1/lib/stubs/libm.so when searching for -lm
/usr/lib64/gcc/s390x-suse-linux/4.1.0/../../../../s390x-suse-linux/bin/ld: skipping incompatible /ASLing01/opt/apps/oracle10g/app/oracle/product/10.2.0/db_1/lib/stubs/libnsl.so when searching for -lnsl
/usr/lib64/gcc/s390x-suse-linux/4.1.0/../../../../s390x-suse-linux/bin/ld: skipping incompatible /ASLing01/opt/apps/oracle10g/app/oracle/product/10.2.0/db_1/lib/stubs/librt.so when searching for -lrt
/usr/lib64/gcc/s390x-suse-linux/4.1.0/../../../../s390x-suse-linux/bin/ld: /ASLing01/opt/apps/oracle10g/app/oracle/product/10.2.0/db_1/lib/libclient10.a(obindps.o): relocation R_390_PC32 against `ocibndps' can not be used when making a shared object; recompile with -fPIC
/usr/lib64/gcc/s390x-suse-linux/4.1.0/../../../../s390x-suse-linux/bin/ld: final link failed: Bad value
collect2: ld gab 1 als Ende-Status zurück
genclntsh: Failed to link libclntsh.so.10.1
(13:54) [oracle@linux-server-LXS1] /ASLing01/opt/apps/oracle10g/app/oracle/product/10.2.0/db_1/bin
Questions:
1) LD_LIBRARY_PATH doesn´t change any behavior of oracle - means the lib-path used stays on the 64bit directory. WHY?
2) All necessary packages are installed (checked with Oracle Admin Docu!). All other devel and lib and compile and stuff packages are installed as 64 and 32 bit version. OK Nearly every f*#(#*_ package which has something to do with compilation and make processes is installed. COULD SOMETHING BE STILL MISSING?
3) What do I have to change to get compilation with 32bit?
4) Is it reasonable to compile with 32bit ? I think it isn´t.
4) This is a S390 System so are there any special libs or patches to install for Oracle?
5) Where are the 64bit libs for oracle ??????? (See below)
What I found out:
The libraries in $ORACLE_HOME/lib and ../lib32 are both 32 bit .... ????? WHY? Not wondering its incompatible.
(13:56) [root@linux-server-LXS1] /ASLing01/opt/apps/oracle10g/app/oracle
find /ASLing01/opt/apps/oracle10g/app/oracle -name "libdl*"/ASLing01/opt/apps/oracle10g/app/oracle/product/10.2.0/db_1/lib/stubs/libdl-2.3.2-stub.so
/ASLing01/opt/apps/oracle10g/app/oracle/product/10.2.0/db_1/lib/stubs/libdl.so
/ASLing01/opt/apps/oracle10g/app/oracle/product/10.2.0/db_1/lib/stubs/libdl.so.2
/ASLing01/opt/apps/oracle10g/app/oracle/product/10.2.0/db_1/lib32/stubs/libdl-2.3.2-stub.so
/ASLing01/opt/apps/oracle10g/app/oracle/product/10.2.0/db_1/lib32/stubs/libdl.so
/ASLing01/opt/apps/oracle10g/app/oracle/product/10.2.0/db_1/lib32/stubs/libdl.so.2
(14:37) [root@linux-server-LXS1] /ASLing01/opt/apps/oracle10g/app/oracle
file /ASLing01/opt/apps/oracle10g/app/oracle/product/10.2.0/db_1/lib/stubs/libdl.so/ASLing01/opt/apps/oracle10g/app/oracle/product/10.2.0/db_1/lib/stubs/libdl.so: ELF 32-bit LSB shared object, Intel 80386, version 1 (SYSV), not stripped
(14:39) [root@linux-server-LXS1] /ASLing01/opt/apps/oracle10g/app/oracle
file /ASLing01/opt/apps/oracle10g/app/oracle/product/10.2.0/db_1/lib32/stubs/libdl.so/ASLing01/opt/apps/oracle10g/app/oracle/product/10.2.0/db_1/lib32/stubs/libdl.so: ELF 32-bit LSB shared object, Intel 80386, version 1 (SYSV), not stripped
(14:40) [root@linux-server-LXS1] /ASLing01/opt/apps/oracle10g/app/oracle
file /ASLing01/opt/apps/oracle10g/app/oracle/product/10.2.0/db_1/lib/stubs/libdl-2.3.2-stub.so/ASLing01/opt/apps/oracle10g/app/oracle/product/10.2.0/db_1/lib/stubs/libdl-2.3.2-stub.so: ELF 32-bit LSB shared object, Intel 80386, version 1 (SYSV), not stripped
(14:40) [root@linux-server-LXS1] /ASLing01/opt/apps/oracle10g/app/oracle
file /ASLing01/opt/apps/oracle10g/app/oracle/product/10.2.0/db_1/lib32/stubs/libdl.so.2/ASLing01/opt/apps/oracle10g/app/oracle/product/10.2.0/db_1/lib32/stubs/libdl.so.2: ELF 32-bit LSB shared object, Intel 80386, version 1 (SYSV), not stripped
(14:40) [root@linux-server-LXS1] /ASLing01/opt/apps/oracle10g/app/oracle[ i]
Libraries are loaded from system as follows:
[i](14:37) [root@linux-server-LXS1] /ASLing01/opt/apps/oracle10g/app/oracle
ldconfig -p|grep -i libnsllibnsl.so.1 (libc6,64bit, OS ABI: Linux 2.6.4) => /lib64/libnsl.so.1
libnsl.so.1 (libc6, OS ABI: Linux 2.6.4) => /lib/libnsl.so.1
libnsl.so (libc6,64bit, OS ABI: Linux 2.6.4) => /usr/lib64/libnsl.so
libnsl.so (libc6, OS ABI: Linux 2.6.4) => /usr/lib/libnsl.so
ldconfig -p|grep -i libdllibdl.so.2 (libc6,64bit, OS ABI: Linux 2.6.4) => /lib64/libdl.so.2
libdl.so.2 (libc6, OS ABI: Linux 2.6.4) => /lib/libdl.so.2
libdl.so (libc6,64bit, OS ABI: Linux 2.6.4) => /usr/lib64/libdl.so
libdl.so (libc6, OS ABI: Linux 2.6.4) => /usr/lib/libdl.so
Thanks for help!
Markus
Message was edited by:
user579884

Not very helpful, but SLES10 is NOT certified on this platform, only SLES9.
Werner

How to install oracle 10g on linux 9.0

am a student in nigeria and my name is tosin, studing oracle 10g on linux 9.0 with oracle partners NIIT. how do i install 9i and 10g on a linux 9.0.

Hello Tosin,
how do i install 9i and 10g on a linux 9.0. Do you mean Red Hat Linux 9 of on Linux AS? www.redhat.com
Anyways
http://www.puschitz.com/InstallingOracle9i.html
Hope this will help you
Cheers
Ravi
http://ravidba-oracle.blogspot.com/

After installing oracle 10g on linux im getting this error

Similar Messages

Maybe you are looking for