After Installing Oracle Virtual Box and changing the network adapter to bridged mode cant access my server
Hi ,
I have installed Oracle Virtual box on windows server 2008 r2 hosted on 1und1.de.
Till installtion and setting up untun on virtualbox it was fine, but once i changed the adapater to bridged mode. I immediatly lost connectivity with my server and now cant access.
It is now 2 days i cant access my server and neither ping it, also the website hosted on it is also down.
The 1und1 has following 2 options
1) using putty i can connect to server command prompt using administrator but cant run any gui application
2) Server Rescue mode: where i get special environment to start, stop services, access registry and command prompt.
Till now i have tried lot of setting to enable network connectivity but not able to success
This is the result of Ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : s15453760
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
Ethernet adapter VirtualBox Host-Only Network:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : VirtualBox Host-Only Ethernet Adapter
Physical Address. . . . . . . . . : 08-00-27-00-04-FD
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::5d5c:5bbc:c61:e9b1%16(Preferred)
Autoconfiguration IPv4 Address. . : 169.254.233.177(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.0.0
Default Gateway . . . . . . . . . :
DHCPv6 IAID . . . . . . . . . . . : 352845863
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-15-B9-51-EA-00-19-99-A5-E7-BE
DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1
fec0:0:0:ffff::2%1
fec0:0:0:ffff::3%1
NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter isatap.{BBF9AA14-45EA-460C-8F23-E106D890D878}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter 6TO4 Adapter:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft 6to4 Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 12:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
How can i restore my connection.
Thanks
Hi,
According to the result of "ipconfig /all", the physical adapter dosen't appear.
Please check if the physical network adapter works properly. We can verify this in Device Manager.
To open Device Manager by using the Windows interface
Click Start, and then click Control Panel.
Click Hardware and Sound.
Click Device Manager.
If the network adapter is working properly, please make sure that the Internet Protocol Version 4(TCP/IPv4) has been checked in the properties of the physical network adapter.
If issue persists, please try to uninstall the Oracle Virtual box.
Best Regards.
Steven Lee
TechNet Community Support
Similar Messages
-
Is anybody having trouble with your ringer after installing OS 6.0 and using the new GPS system?
The good (?) news is many people are have OS 6.0.1 wifi problems.
I could not connect to my home network. What eventually worked for me (twice now), though it makes no sense, is to go to the particular connection you want to use, hit the little blue arrow on the right to get the details screen. Scroll down to the bottom and change "HTTP Proxy" from "None" to "Auto". Then leave the "URL" field that pops up blank.
This should not work. However, it has for me where many other suggestions have not.
*shrug*
Best of luck. -
Our cable company installed a new wireless router and changed the name of the router. Now my HP C4500 printer won't print from my laptop.
I can't find any ot the Set Up stuff I used initially.
Is there any way to get my printer to work again...wirelessly?Get the latest software for your printer from the "Support & Drivers" link at the top of this page. When you start the installation it will ask what kind of installation you would like. Choose "Wireless" or "Network" then click "Next".
Eventually it will ask you to plug in a USB cable to the printer temporarily to communicate the new router's info to the printer. Make sure to not plug in the USB until it asks.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP -
A guest at our house was using his ipad and changed the apple netwrok name to another and put a password on it. How do I eliminate this netwrok and get back to the Apple Network?
Please check out the following AirPort User Tip for details on resetting the password. Once that is done, you can access the base station to change its Wireless Name (or SSID) back to what you prefer. To discourage other "guests" from changing the AirPort settings, you should also change the default base station Administrator password.
-
Cant restore after installing updates how do I change the home user/account
I installed 3 updates, opps, this morning, and when I restarted the computer it had reverted back to old setting from 2004. I purchased the computer from a friend, and had worked hard to remove his stuff, now my settings mail etc are gone and the old stuff is back. How do I restore the computer to what it was before the updates took it all off? also how do I change the home from his back to ours? sorry, I am new at this and very very frustrated with the mac so far.
Changing the home folder name caused the problems, not the updates. The problems won't show up until you restart, which, in your case, was just
after the updates. See:
<http://docs.info.apple.com/article.html?artnum=107854>
<http://docs.info.apple.com/article.html?artnum=106824>
When you get a used computer, it is safest to erase the disk (with zeroing option), then reinstall OSX, update it, and get the latest versions of all the software you need. You should also run Extended Tests from the Apple Hardware Test disc to be sure there are no hardware problems. -
Enable and Disabling the Network Adapter with domain user (Standard User)
Hi Guys.
We setup a active directory in our organization. Added client systems(Windows 7 and Windows 8) to the Domain. Domain users are accessing the system with standard users permission. I don't want to give Administrator permissions. But user should able
to Disable and Enable network Adapter without giving the administrator permissions. Please suggest .
Thanks in advance for the help :)Hi,
According to your description, my understanding is that you want the standard user has the permission to disable/enable network adapter.
I recommend you to implement this function by group policy:
User configuration - Administrative Templates – Network - Network connections
Enable this policy:
Ability to enable/disable a LAN Connection
Besides, you may consider of joining users to Network Configuration Operators Group, detailed information you may reference:
A Description of the Network Configuration Operators Group
http://support.microsoft.com/en-us/kb/297938
Best Regards,
Eve Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Windows 7 Enterprise is not genuine after installing new hard-drive and cloning the old one
I retired from my job as a university professor two years ago, and they let me keep my laptop computer, which is a Dell Latitude E4300 with Windows 7 Enterprise installed. I do not have any of the original disks for Windows. Recently, the hard-drive began
to fail, so I replaced it with a new one, cloning the old hard-drive onto the new one. Soon after that, a popup window began appearing saying that this computer is not running genuine windows. One important consequence of this is that I can no longer use Windows
Update, so I have concerns about security. If I go to the control panel under “System”, it says windows is activated and gives me the Product ID. I have talked to tech support at Microsoft, and they tell me something along the lines of the following: that
the problem is the new hard-drive is not recognized as being licensed to use this copy of Windows, and that I should post a question on one of the forums asking this: How can I reinstall Windows 7 Enterprise on the new hard-drive? Any assistance will be much
appreciated.
PS I have no idea which forum this should go under, so pretty much just picked one randomly.Thank you for the reply. Below is the diagnostic report:
Diagnostic Report (1.9.0027.0):
Windows Validation Data-->
Validation Code: 0x8004FE21
Cached Online Validation Code: 0x0
Windows Product Key: *****-*****-*****-*****-XVH7B
Windows Product Key Hash: juq6zzHf9lIH1XRY1VK2YrQYWO0=
Windows Product ID: 55041-011-1350732-86681
Windows Product ID Type: 6
Windows License Type: Volume MAK
Windows OS version: 6.1.7601.2.00010100.1.0.004
ID: {04DEBE17-699E-4D0A-A59D-3C196C2C84FE}(3)
Is Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/A, hr = 0x80070002
Signed By: N/A, hr = 0x80070002
Product Name: Windows 7 Enterprise
Architecture: 0x00000009
Build lab: 7601.win7sp1_gdr.130828-1532
TTS Error:
Validation Diagnostic:
Resolution Status: N/A
Vista WgaER Data-->
ThreatID(s): N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
Windows XP Notifications Data-->
Cached Result: N/A, hr = 0x80070002
File Exists: No
Version: N/A, hr = 0x80070002
WgaTray.exe Signed By: N/A, hr = 0x80070002
WgaLogon.dll Signed By: N/A, hr = 0x80070002
OGA Notifications Data-->
Cached Result: N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
OGAExec.exe Signed By: N/A, hr = 0x80070002
OGAAddin.dll Signed By: N/A, hr = 0x80070002
OGA Data-->
Office Status: 100 Genuine
Microsoft Office Enterprise 2007 - 100 Genuine
OGA Version: N/A, 0x80070002
Signed By: N/A, hr = 0x80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005_E2AD56EA-765-b01a_E2AD56EA-766-0_E2AD56EA-148-80004005_16E0B333-89-80004005_B4D0AA8B-1029-80004005
Browser Data-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default Browser: C:\Program Files (x86)\Mozilla Firefox\firefox.exe
Download signed ActiveX controls: Prompt
Download unsigned ActiveX controls: Disabled
Run ActiveX controls and plug-ins: Allowed
Initialize and script ActiveX controls not marked as safe: Disabled
Allow scripting of Internet Explorer Webbrowser control: Disabled
Active scripting: Allowed
Script ActiveX controls marked as safe for scripting: Allowed
File Scan Data-->
File Mismatch: C:\Windows\system32\wat\watadminsvc.exe[7.1.7600.16395], Hr = 0x80092003
File Mismatch: C:\Windows\system32\wat\watux.exe[7.1.7600.16395], Hr = 0x80092003
File Mismatch: C:\Windows\system32\sppobjs.dll[6.1.7601.17514], Hr = 0x80092003
File Mismatch: C:\Windows\system32\sppc.dll[6.1.7601.17514], Hr = 0x800b0100
File Mismatch: C:\Windows\system32\sppcext.dll[6.1.7600.16385], Hr = 0x800b0100
File Mismatch: C:\Windows\system32\sppwinob.dll[6.1.7601.17514], Hr = 0x80092003
File Mismatch: C:\Windows\system32\slc.dll[6.1.7600.16385], Hr = 0x800b0100
File Mismatch: C:\Windows\system32\slcext.dll[6.1.7600.16385], Hr = 0x800b0100
File Mismatch: C:\Windows\system32\sppuinotify.dll[6.1.7600.16385], Hr = 0x80092003
File Mismatch: C:\Windows\system32\slui.exe[6.1.7601.17514], Hr = 0x80092003
File Mismatch: C:\Windows\system32\sppcomapi.dll[6.1.7601.17514], Hr = 0x800b0100
File Mismatch: C:\Windows\system32\sppcommdlg.dll[6.1.7600.16385], Hr = 0x800b0100
File Mismatch: C:\Windows\system32\sppsvc.exe[6.1.7601.17514], Hr = 0x80092003
File Mismatch: C:\Windows\system32\drivers\spsys.sys[6.1.7127.0], Hr = 0x80092003
File Mismatch: C:\Windows\system32\drivers\spldr.sys[6.1.7127.0], Hr = 0x80092003
File Mismatch: C:\Windows\system32\systemcpl.dll[6.1.7601.17514], Hr = 0x800b0100
File Mismatch: C:\Windows\system32\user32.dll[6.1.7601.17514], Hr = 0x800b0100
Other data-->
Office Details: <GenuineResults><MachineData><UGUID>{04DEBE17-699E-4D0A-A59D-3C196C2C84FE}</UGUID><Version>1.9.0027.0</Version><OS>6.1.7601.2.00010100.1.0.004</OS><Architecture>x64</Architecture><PKey>*****-*****-*****-*****-BBBBB</PKey><PID>55041-011-1350732-86681</PID><PIDType>6</PIDType><SID>S-1-5-21-240060965-2561850352-3419627931</SID><SYSTEM><Manufacturer>Dell
Inc.</Manufacturer><Model>Latitude E4300 </Model></SYSTEM><BIOS><Manufacturer>Dell Inc.</Manufacturer><Version>A21</Version><SMBIOSVersion
major="2" minor="4"/><Date>20110111000000.000000+000</Date></BIOS><HWID>68B63A07018400F8</HWID><UserLCID>0409</UserLCID><SystemLCID>0409</SystemLCID><TimeZone>Pacific Standard Time(GMT-08:00)</TimeZone><iJoin>1</iJoin><SBID><stat>3</stat><msppid></msppid><name></name><model></model></SBID><OEM><OEMID>DELL
</OEMID><OEMTableID>M09 </OEMTableID></OEM><GANotification/></MachineData><Software><Office><Result>100</Result><Products><Product GUID="{90120000-0030-0000-0000-0000000FF1CE}"><LegitResult>100</LegitResult><Name>Microsoft
Office Enterprise 2007</Name><Ver>12</Ver><Val>1DB36DFCEA6586</Val><Hash>uf4pjarnSPRhy0+iMrKzL8KTLeY=</Hash><Pid>89388-707-1262377-65112</Pid><PidType>14</PidType></Product></Products><Applications><App
Id="15" Version="12" Result="100"/><App Id="16" Version="12" Result="100"/><App Id="18" Version="12" Result="100"/><App Id="19" Version="12" Result="100"/><App Id="1A" Version="12" Result="100"/><App Id="1B" Version="12" Result="100"/><App
Id="44" Version="12" Result="100"/><App Id="A1" Version="12" Result="100"/><App Id="BA" Version="12" Result="100"/></Applications></Office></Software></GenuineResults>
Spsys.log Content: 0x80070002
Licensing Data-->
Software licensing service version: 6.1.7601.17514
Name: Windows(R) 7, Enterprise edition
Description: Windows Operating System - Windows(R) 7, VOLUME_MAK channel
Activation ID: 9abf5984-9c16-46f2-ad1e-7fe15931a8dd
Application ID: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 55041-00172-011-135073-03-1033-7600.0000-0402011
Installation ID: 017002020180881956515246274583104396790522223804443953
Processor Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
Machine Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use License URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product Key Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial Product Key: XVH7B
License Status: Licensed
Remaining Windows rearm count: 3
Trusted time: 6/6/2014 2:38:03 PM
Windows Activation Technologies-->
HrOffline: 0x8004FE21
HrOnline: N/A
HealthStatus: 0x000000000001EFF0
Event Time Stamp: 5:30:2014 15:10
ActiveX: Registered, Version: 7.1.7600.16395
Admin Service: Registered, Version: 7.1.7600.16395
HealthStatus Bitmask Output:
Tampered File: %systemroot%\system32\sppobjs.dll
Tampered File: %systemroot%\system32\sppc.dll|sppc.dll.mui
Tampered File: %systemroot%\system32\sppcext.dll|sppcext.dll.mui
Tampered File: %systemroot%\system32\sppwinob.dll
Tampered File: %systemroot%\system32\slc.dll|slc.dll.mui
Tampered File: %systemroot%\system32\slcext.dll|slcext.dll.mui
Tampered File: %systemroot%\system32\sppuinotify.dll|sppuinotify.dll.mui
Tampered File: %systemroot%\system32\slui.exe|slui.exe.mui|COM Registration
Tampered File: %systemroot%\system32\sppcomapi.dll|sppcomapi.dll.mui
Tampered File: %systemroot%\system32\sppcommdlg.dll|sppcommdlg.dll.mui
Tampered File: %systemroot%\system32\sppsvc.exe|sppsvc.exe.mui
Tampered File: %systemroot%\system32\drivers\spsys.sys
HWID Data-->
HWID Hash Current: MgAAAAEAAQABAAIAAQABAAAAAwABAAEAeqgiDXhybAimeiQ1hEDag8ysrmAi+8rbRso=
OEM Activation 1.0 Data-->
N/A
OEM Activation 2.0 Data-->
BIOS valid for OA 2.0: yes
Windows marker version: 0x20001
OEMID and OEMTableID Consistent: yes
BIOS Information:
ACPI Table Name OEMID Value OEMTableID Value
APIC DELL M09
FACP DELL M09
HPET DELL M09
BOOT DELL M09
MCFG DELL M09
____ DELL M09
ASF! DELL M09
TCPA
SLIC DELL M09
SSDT PmRef CpuPm
scott cohen -
Oracle virtual box and OEL 64 bit installation
Hi,
Wonder if anyone can help.
I have a centos5 x86-64bit installation and have downloaded virtualbox and have started to install OEL 64bit.
All appear well until I get a message saying that
yelp-2.16.0-13.el5.x86_64 cannot be opened.
I can either retry (the result is the same message) or I can reboot which seems to defeat the object of the exercise.
does anyone have any experience on how to resolve this issue?
regards
AlanHi Alan,
to be honest, I always took the "DVD iso" to install... not the CD images. I never tried the CD images...
Furthermore yelp-2.0.16-13 is OEL 5.0... which is pretty old, I would suggest you at least taking the CDs of OEL 5.4....
I could imagine that the VM support was not that good in OEL 5.0...
Regards
Sebastian -
How do I print an image on part of a sheet of paper without it being centered?
C'mon! Anyone???? I'm desperate!
-
Problem starting ASM instance after installing Oracle Grid standalone
Hi!
After installing Oracle Grid 11gr2 and rebooting my machine:
Linux localhost.localdomain 2.6.32-300.10.1.el5uek #1 SMP Wed Feb 22 17:37:40 EST 2012 x86_64 x86_64 x86_64 GNU/Linux
I run asmca command and it failed to startup ASM instance, I tried to paste the log but it's too long!
Could someone help me please! thank you very much!
José
I paste just the last piece:
+[main] [ 2012-03-15 15:01:56.853 CET ] [SQLEngine.initialize:354] m_bReaderStarted: false+
+[main] [ 2012-03-15 15:01:56.857 CET ] [SQLEngine.initialize:358] Starting Reader Thread...+
+[main] [ 2012-03-15 15:01:56.919 CET ] [UsmcaLogger.logExit:122] Exiting oracle.sysman.assistants.usmca.backend.USMInstance Method : createSQLEngine+
+[main] [ 2012-03-15 15:01:56.919 CET ] [OracleHome.getVersion:877] OracleHome.getVersion called. Current Version: null+
+[main] [ 2012-03-15 15:01:56.927 CET ] [InventoryUtil.getOUIInvSession:347] setting OUI READ level to ACCESSLEVEL_READ_LOCKLESS+
+[main] [ 2012-03-15 15:01:56.927 CET ] [OracleHome.getVersion:896] Homeinfo /u01/app/grid/product/11.2.0/grid,1+
+[main] [ 2012-03-15 15:01:56.928 CET ] [Version.isPre:274] version to be checked 11.2.0.1.0 major version to check against10+
+[main] [ 2012-03-15 15:01:56.928 CET ] [Version.isPre:285] isPre.java: Returning FALSE+
+[main] [ 2012-03-15 15:01:56.929 CET ] [OCR.loadLibrary:308]+
Inside constructor of OCR
+[main] [ 2012-03-15 15:01:56.929 CET ] [OCR.isCluster:939] Calling OCRNative for isCluster()+
+[main] [ 2012-03-15 15:01:56.930 CET ] [OCR.isCluster:943] OCR Result status = true+
+[main] [ 2012-03-15 15:01:56.930 CET ] [OCR.isCluster:955] Bolean result = false+
+[main] [ 2012-03-15 15:01:56.930 CET ] [Version.isPre:274] version to be checked 11.2.0.1.0 major version to check against10+
+[main] [ 2012-03-15 15:01:56.930 CET ] [Version.isPre:285] isPre.java: Returning FALSE+
+[main] [ 2012-03-15 15:01:56.931 CET ] [MessageBundle.getMessageFields:338] MessageBundle.getMessage() failed to load the string PRKC-PRKC-1036 : CRS_HOME name passed to the method was null Exception: java.util.MissingResourceException: Can't find resource for bundle oracle.ops.mgmt.resources.PrkcMsg, key PRKC-1036 : CRS_HOME name passed to the method was null+
+[main] [ 2012-03-15 15:01:56.931 CET ] [ClusterUtils.getCRSActiveVersion:1797] Error getting CRS active version: PRKC-PRKC-1036 : CRS_HOME name passed to the method was null : <null>+
+[main] [ 2012-03-15 15:01:56.931 CET ] [OracleHome.getVersion:903] OracleHome.CRSActiveVersion: null+
+[main] [ 2012-03-15 15:01:57.084 CET ] [OracleHome.getVersion:922] OracleHome.server.getVersion Version: 11.2.0.1.0+
+[main] [ 2012-03-15 15:01:57.084 CET ] [OracleHome.getVersion:943] Current Version From Inventory: 11.2.0.1.0+
+[main] [ 2012-03-15 15:01:57.084 CET ] [OracleHome.getVersion:948] using sqlplus: /u01/app/grid/product/11.2.0/grid/bin/sqlplus+
+[main] [ 2012-03-15 15:01:57.084 CET ] [UsmcaLogger.logInfo:141] Role SYSASM+
+[main] [ 2012-03-15 15:01:57.085 CET ] [UsmcaLogger.logInfo:141] OS Auth true+
+[main] [ 2012-03-15 15:01:57.182 CET ] [SQLEngine.done:2148] Done called+
+[main] [ 2012-03-15 15:01:57.183 CET ] [UsmcaLogger.logException:171] SEVERE:method oracle.sysman.assistants.usmca.backend.USMInstance:checkAndStartupInstance+
+[main] [ 2012-03-15 15:01:57.183 CET ] [UsmcaLogger.logException:172] ORA-01034: ORACLE not available+
+[main] [ 2012-03-15 15:01:57.183 CET ] [UsmcaLogger.logException:173] oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-01034: ORACLE not available+
oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeImpl(SQLEngine.java:1650)
oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeQuery(SQLEngine.java:823)
oracle.sysman.assistants.usmca.backend.USMInstance.checkAndStartupInstance(USMInstance.java:573)
oracle.sysman.assistants.usmca.backend.USMInstance.discoverASMInstance(USMInstance.java:340)
oracle.sysman.assistants.usmca.service.UsmcaService.discoverASMInstance(UsmcaService.java:146)
oracle.sysman.assistants.usmca.Usmca.execute(Usmca.java:230)
oracle.sysman.assistants.usmca.Usmca.main(Usmca.java:333)
+[main] [ 2012-03-15 15:01:57.184 CET ] [UsmcaLogger.logExit:122] Exiting oracle.sysman.assistants.usmca.backend.USMInstance Method : checkAndStartupInstance+
+[main] [ 2012-03-15 15:01:57.184 CET ] [UsmcaLogger.logInfo:141] ASM failed to start. Check /u01/app/grid/cfgtoollogs/asmca/asmca-1203153PM0138.log for details.+Hi,
i've got similar problem but my asm is not just down. After installing grid home with infrastructure I've restarted os and there is no crs services and the only result from this command:
# ps -ef | grep grid
grid 2075 1 0 13:58 ? 00:00:00 /u01/app/grid/product/11.2.0/grid/bin/ohasd.bin reboot
root 2463 2439 0 14:06 pts/0 00:00:00 grep gridgive me opposite to this one before restart:
$ ps -ef | grep grid
grid 2076 1 0 13:01 ? 00:00:00 /u01/app/grid/product/11.2.0/grid/bin/ohasd.bin reboot
grid 3646 1 0 13:44 ? 00:00:04 /u01/app/grid/product/11.2.0/grid/bin/ohasd.bin reboot
grid 3806 1 0 13:45 ? 00:00:02 /u01/app/grid/product/11.2.0/grid/bin/oraagent.bin
grid 3820 1 0 13:45 ? 00:00:00 /u01/app/grid/product/11.2.0/grid/bin/evmd.bin
grid 3853 3820 0 13:45 ? 00:00:00 /u01/app/grid/product/11.2.0/grid/bin/evmlogger.bin -o /u01/app/grid/product/11.2.0/grid/evm/log/evmlogger.info -l /u01/app/grid/product/11.2.0/grid/evm/log/evmlogger.log
root 3879 2307 0 13:46 pts/0 00:00:00 su - grid
grid 3881 3879 0 13:46 pts/0 00:00:00 -bash
grid 4172 1 0 13:48 ? 00:00:00 /u01/app/grid/product/11.2.0/grid/bin/cssdagent
grid 4197 1 0 13:48 ? 00:00:00 /u01/app/grid/product/11.2.0/grid/bin/ocssd.bin
grid 4550 1 0 13:49 ? 00:00:00 asm_pmon_+ASM
grid 4552 1 0 13:49 ? 00:00:00 asm_psp0_+ASM
grid 4554 1 0 13:49 ? 00:00:02 asm_vktm_+ASM
grid 4558 1 0 13:49 ? 00:00:00 asm_gen0_+ASM
grid 4560 1 0 13:49 ? 00:00:00 asm_diag_+ASM
grid 4562 1 0 13:49 ? 00:00:00 asm_dia0_+ASM
grid 4564 1 0 13:49 ? 00:00:00 asm_mman_+ASM
grid 4566 1 0 13:49 ? 00:00:00 asm_dbw0_+ASM
grid 4568 1 0 13:49 ? 00:00:00 asm_lgwr_+ASM
grid 4570 1 0 13:49 ? 00:00:00 asm_ckpt_+ASM
grid 4572 1 0 13:49 ? 00:00:00 asm_smon_+ASM
grid 4574 1 0 13:49 ? 00:00:00 asm_rbal_+ASM
grid 4576 1 0 13:49 ? 00:00:00 asm_gmon_+ASM
grid 4578 1 0 13:49 ? 00:00:00 asm_mmon_+ASM
grid 4580 1 0 13:49 ? 00:00:00 asm_mmnl_+ASM
grid 4582 1 0 13:49 ? 00:00:00 oracle+ASM (DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))
grid 6128 1 0 13:52 ? 00:00:00 /u01/app/grid/product/11.2.0/grid/bin/tnslsnr LISTENER -inherit
grid 6142 3881 0 13:53 pts/0 00:00:00 ps -ef
grid 6143 3881 0 13:53 pts/0 00:00:00 grep grid
$ srvctl status listener
Listener LISTENER is enabled
Listener LISTENER is running on node(s): pc
$ srvctl status asm
ASM is running on pcI'm using 2x 1TB hdisk as 2 pv in one vg. I thought that lvolume permissions are incorrect but now I had:
# ls -l /dev | grep dm
crw-rw---- 1 root root 10, 61 May 16 13:57 cpu_dma_latency
brw-rw---- 1 root disk 253, 0 May 16 13:57 dm-0
brw-rw---- 1 root disk 253, 1 May 16 13:57 dm-1
brw-rw---- 1 grid asmadmin 253, 10 May 16 13:57 dm-10
brw-rw---- 1 grid asmadmin 253, 11 May 16 13:57 dm-11
brw-rw---- 1 grid asmadmin 253, 12 May 16 13:57 dm-12
brw-rw---- 1 grid asmadmin 253, 13 May 16 13:57 dm-13
brw-rw---- 1 grid asmadmin 253, 2 May 16 13:57 dm-2
brw-rw---- 1 grid asmadmin 253, 3 May 16 13:57 dm-3
brw-rw---- 1 grid asmadmin 253, 4 May 16 13:57 dm-4
brw-rw---- 1 grid asmadmin 253, 5 May 16 13:57 dm-5
brw-rw---- 1 grid asmadmin 253, 6 May 16 13:57 dm-6
brw-rw---- 1 grid asmadmin 253, 7 May 16 13:57 dm-7
brw-rw---- 1 grid asmadmin 253, 8 May 16 13:57 dm-8
brw-rw---- 1 grid asmadmin 253, 9 May 16 13:57 dm-9and:
# ls -l /dev/vg_main/
total 0
lrwxrwxrwx 1 root root 7 May 16 13:57 asmlvol1 -> ../dm-2
lrwxrwxrwx 1 root root 8 May 16 13:57 asmlvol10 -> ../dm-11
lrwxrwxrwx 1 root root 8 May 16 13:57 asmlvol11 -> ../dm-12
lrwxrwxrwx 1 root root 8 May 16 13:57 asmlvol12 -> ../dm-13
lrwxrwxrwx 1 root root 7 May 16 13:57 asmlvol2 -> ../dm-3
lrwxrwxrwx 1 root root 7 May 16 13:57 asmlvol3 -> ../dm-4
lrwxrwxrwx 1 root root 7 May 16 13:57 asmlvol4 -> ../dm-5
lrwxrwxrwx 1 root root 7 May 16 13:57 asmlvol5 -> ../dm-6
lrwxrwxrwx 1 root root 7 May 16 13:57 asmlvol6 -> ../dm-7
lrwxrwxrwx 1 root root 7 May 16 13:57 asmlvol7 -> ../dm-8
lrwxrwxrwx 1 root root 7 May 16 13:57 asmlvol8 -> ../dm-9
lrwxrwxrwx 1 root root 8 May 16 13:57 asmlvol9 -> ../dm-10
lrwxrwxrwx 1 root root 7 May 16 13:57 lv01_swap -> ../dm-1
lrwxrwxrwx 1 root root 7 May 16 13:57 lv02_root -> ../dm-0I've used search path for ams disks as /dev/dm* and /dev/vg_main/asm* and seen all of them in both configurations.
I've tried to reconfigure HAS through (as root):
$GRID_HOME/crs/install/roothas.pl -deconfig -force -verbose
$GRID_HOME/root.shthis gave me working asm instance but after restart I'm in base position with no crs services.
And... I've tried to startup crs after restart with no luck but before restart I can shutdown everything and startup ASM instance too (so everything is fine till the reboot). I'm on CentOS 6:
$ uname -a
Linux pc 2.6.32-220.13.1.el6.x86_64 #1 SMP Tue Apr 17 23:56:34 BST 2012 x86_64 x86_64 x86_64 GNU/Linux
# cat /etc/issue
CentOS release 6.2 (Final)
Kernel \r on an \mAny hints about how to resolve this problem would be most welcome.
Regards. -
-lo exception the network adapter could not establish the connection
Hi,
I am getting following error when connecing to Oracle database
error: -lo exception the network adapter could not establish the connection
I am able to connect through sqlplus
pls help
thanksMicrosoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\2101571>sqlplus
SQL*Plus: Release 11.1.0.6.0 - Production on Mon Aug 29 22:56:02 2011
Copyright (c) 1982, 2007, Oracle. All rights reserved.
Enter user-name: sys as sysdba
Enter password:
Connected to:
Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> kocdw as sysdba
SP2-0734: unknown command beginning "kocdw as s..." - rest of line ignored.
SQL> conn kocdw
Enter password:
Connected.
SQL> startup
ORA-01031: insufficient privileges
SQL> conn sys as sysdba
Enter password:
Connected.
SQL> startup
ORA-01081: cannot start already-running ORACLE - shut it down first
SQL> select instance_name from V$instance;
INSTANCE_NAME
orcl01
SQL> SELECT * from v$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
PL/SQL Release 11.1.0.6.0 - Production
CORE 11.1.0.6.0 Production
TNS for 32-bit Windows: Version 11.1.0.6.0 - Production
NLSRTL Version 11.1.0.6.0 - Production
SQL> -
I just purchased Adobe Lightroom 5 and can't activate it after installing it on my computer because the product box doesn't contain a 24 digit S/N serial number but an 8 digit PNB number. I contacted the vendor and they told me to seek help via the Adobe help lines. Does anyone have a solution?
Unfortunately, the "find your serial number quickly" link does not work because I don't have any number on my Lightroom cdrom box with 24 digits... All I have is an 8 digit PN number... :-/
-
Installing Server 2008 using Oracle Virtual Box
Hey there does anyone know how to install server 2008 as a virtual machine using Oracle Virtual Box?
Hi,
Due to Virtual Box is not related to Microsoft product, I suggest you try to look Virtual Box for
help.
By the way, I find some articles
how to install windows server2008 on Virtual Box
http://www.brighthub.com/computing/windows-platform/articles/31355.aspx
http://www.youtube.com/watch?v=r0tKw1k2rFs
Important
Note: This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control these sites and has not tested any software or information found on these sites; therefore,
Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. There are inherent dangers in the use of any software found on the Internet, and Microsoft cautions you to make sure that you
completely understand the risk before retrieving any software from the Internet.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
After installing Mountain Lion, iMessages and Facetime does not work. When I try to sign-in I get a message that says: The server encountered an error processing registration. Please try again later. After 4 calls to apple and 8 and a half hours on the phone. The apple people does not how to solve the problem. The last thing they told me is that they will send the problem to their engineers and I will hear from them. unfortunately they have not contact me.
During the phone calls I tried putting the date and time in automatic, changing the username and password, I even tried using somebody elses username and password. Please help, facetime is my tool to telecomute, and it is hurting my job.I had the same problem and found the solution here:
https://discussions.apple.com/thread/3189272 -
My computer slows down and hangs after installing oracle 10g
My computer just slows down after installing oracle 10g. I have a pentium 4 3ghz with 512 memory (32 mb used by graphics built in card). It slows down and hanged even if I agjusted the swap memory to 800 mb. I have two swap file/page file - in drive c and drive d. I even cannot shut it down because it takes maybe 30 minutes just to see the "shut-off/log-off" screen.
Before starting up Oracle, when you go to the task manager, how much RAM does it show actually free? 512 MB is pretty small to run Oracle in the first place-- Windows and Office can use a fair chunk of RAM themselves, depending on which Office apps you are running. You may also be suprised by the amount of RAM that a web browser, email client, and the various other apps that folks generally install can use.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC
Maybe you are looking for
-
Preview monitor playback 'sticks' with certain types of footage.
Hi there, I wonder if anyone could help me with this problem. I am going through a Apple certified FCP training book with a DVD of footage for video editing. I a have copied the footage onto my hard drive as recomended. However, some clips will not p
-
HT1335 my hard drive crashed can i get the music from my ipod (windows)
does anyone know how to get the music off my old ipod to my new computer?
-
Where is this actionscript code?
Dear All, I am getting the message below which does make sense but I cannot find any actionscript on Scene 1, layer=Layer 1, frame=1:Line 2. I get the ststement on three different frames. None of them have actionscript. I believe the fla file was pre
-
How to maintain table ASHMETHODS?
Hello Experts, I'd like to enter a record into table ASHMETHODS. However, SM30 cannot be used as the table has no table maintenance generated. Also I don't think I should generate the table maintenance screen as I can see, now, there are many records
-
Portal Exception - Deployment masthead
Hello Portal Experts, Enterprise Portal 6.40 I have uploaded a the original masterhead PAR file to PCD (com.sap.portal.navigation.masthead.par) When I now run the iView I got the following Log file. When I like to create a new iView of the masthead p