After installing os-5 camera doesnt zoom

I installed the new iOS-5 software and found that the zoom feature on my I-phone 4 was missing. Should I reintall the software (probably will) but wonder if I need to toggle a setting or somthing simple. I hate losing my access to vmail every time I reinstall the software..need to reset password. And its a pia to go to my local apple store and visit the genious bar. any suggestions? thanx

Yes, they seem to have changed the 'tap to zoom' to more of a 'pinch to zoom.' Despite what some other people on the forums say, the zoon feature has NOT disappeared, it's simply changed a bit.
Cheers.

Similar Messages

TS3274 After installing iOS 7 camera stopped working normally. I can't take pictures with the back camera only the front camera. All was good before the update. Please fix this bug.

After installing iOS 7 camera stopped working normally. I can't take pictures with the back camera only the front camera. All was good before the update. Please fix this bug.

Hi Midnightbrat,
Welcome to the Support Communities!
The troubleshooting steps for the camera on the iPad are similar to the iPhone: I've highlighted the pertinent steps below:
Hardware troubleshooting
http://support.apple.com/kb/ts2802
Camera
If the screen shows a closed lens or black image, force quit the Camera app.
If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tapping Settings > General > Restrictions.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Third-party cases can interfere with the autofocus/exposure feature and the flash; try removing the case if you have image-quality issues with photos.
Try turning the iPad off and then back on.
Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
Try switching between the front and the back cameras to verify if the issue persists on both.
I hope this information helps ....
Have a great day!
- Judy

Can't burn blank CD after installing CD that came with ipod nano

Can't burn blank CD after installing ipod software - I have the system prefs set to launch Toast 6 when inserting a blank disk, and the drive just churns and then ejects the CD. It mounts and runs burned music and data disks with no problem.
My job requires me to burn data disks from pictures I take at work. Should I re-install Toast? The OS? I ran Disk Utility to check/fix permissions, and no change.

The CD that came with the nano won't have anything on it that you won't get with a full iTunes install. In fact, it may have been an OLDER version of the iTunes software than what you had installed before.
I'd reccomend downloading the latest version of iTunes from Apple and installing that to rule out software reversion issues.
If the problem still exists, try booting into toast before inserting the blank disk and see if Toast can still burn to the CD. If it can, then odds are you have to re-instruct your computer to boot toast when a blank CD is inserted. If it can't see the blank CD, or the Finder spits it out again, then I think you'd have to re-install Toast.
Doc

After installing itunes Windows 7 doesnt boot and stalls while loading atipcie.sys driver

After installing itunes my computer stalls when loading atipcie.sys driver. Computer will not boot up in safe mode or Last known good. Only resolution was to perform System Restore to a time before itunes was installed, thus deleting the itunes installation
Anyone know of a fix or workaround for this issue ?

Windows 7 64 bit core i7
BSOD while updating to iTunes 10 with suspended installation of Apple Mobile Device Support. Network drivers no longer working as a result. Attempted fix by downloading from a different machine and competing install via files transferred over on flash drive. No dice. Attempted removal of iTunes, QuickTime, Apple Mobile Device Support, Apple Application Support, Apple Software Update to see if this would fix. Followed this up with a restart. This seems to have improved matters as system is starting up faster. No dice. Try reinstall network drivers from Sony ViaoCare disk. Installed and restarted. No dice. Next, try Widows 7 Network and Sharing diagnostics. No dice. Next try manual removal & reinstall of network driver using Device Manager, restart. Can't seem to re-install Network Controller. Still trying to solve this.

After installing iLife'11, iPhoto doesnt open!

I installed iLife'11 onmy Macbook and now when I try to open my iPhoto, it says that it is either damaged or incomplete. I had updated iPhoto prior to installing iLife'11 and everything was ok. There are currently no updates available on my comp.

And, what will happen if i uninstall iLife all together. That is what I would really like to do....

HT4623 After installed ios7, my imessage doesnt work :(

I just dowloaded ios 7.0.2 and after that my imessage didnt work. When i tried to use apple id to connect imesg, it says"Couldnt sign in.Pkease check your network connection and try again."
Actually there is no problem about my network connection.

I have the exact same problem.....you are not alone, there seems to be lots of other people with the problem too....
I cannot get facetime, imessage or find iphone to work...
Tried everything, like you said .... DNS settings, restore, etc....
Phoned apple and they told me to take it to the genius bar and they will swap it for a new one...???

Powermac g4 shuts down during start up after installing Leopard and upgrade

I have a powermac g4 (agp), 1ghz, 120gig hd
I successfully installed Leopard. After install the updater came up so I updated the files. I think they were OSX update, quicktime, itunes, and a couple of others I can't recall. I was prompted to restart for updates and when I did it will get to the white screen with the grey apple and spinning wheel then it just shuts off. I have tried to start it up several times and it does the same thing each time. I can't start with the leopard disk since I can't get the dvd drive to open without it running. I've looked at other similar posts on this subject but don't see any that are similar to mine. Any help would be appreciated.

Hi, Claire -
I can't start with the leopard disk since I can't get the dvd drive to open without it running.
Couple of ways to work around that -
• Restart or boot the machine, immediately press the mouse button, keep it held down. This is a hardware command to the Mac to eject all removable media, which should open the drive tray. Insert the disk and close the tray, restart and press the C key.
• Try restarting or booting the machine, then immediately press the Option key (ideally before or simultaneous with the startup chime), keep it held down. This should bring up Startup Manager (a vivid blue screen with a few large icons showing). Once Startup Manager has fully loaded, press Command-. (Command-PeriodKey). This should open the optical drive tray. Insert the Leopard disk and close the tray; wait a bit for the drive to spin up; then click the circular arrow icon on the left. This will cause the machine to rescan the available buses and find the Leopard disk. Once that has displayed, click it to select it and then click the straight arrow icon on the right. It should now boot to that disk.
Article #HT1310 - Startup Manager: How to Select a Startup Volume
powermac G4 (agp/sawtooth), 1ghz....
The fastest G4 (AGP), aka "Sawtooth", machine shipped was 500MHz. If your machine is 1GHz, then it has either had a processor upgrade, or it is a later model. It helps us to know which it actually is. These articles can help you identify it -
Article #58418 - Power Mac G4: How to Differentiate Between Models
Article #42739 - Power Mac G4: How to Differentiate Between Models (part 2)
The fact that it may have an AGP graphics card does not make it a G4 (AGP), or Sawtooth, model - all G4's after the G4 (PCI) model shipped with AGP graphics cards, including the Quicksilver and MDD models.

Great Problemes after installing Yosemite (10.10.2 ) with Photoshop CS6....The program crashes --last time 10 times during my work session..wacomtable doesnt work..it is slow...and get error messages about the graphic card....It s a Terror to work with my

great Problemes after installing Yosemite (10.10.2 ) with Photoshop CS6....The program crashes --last time 10 times during my work session..wacomtable doesnt work..it is slow...and get error messages about the graphic card....It s a Terror to work with my beloved Photoshop!

The Yosemite upgrade very often damages existing Photoshop installations. Thank Apple for that.
You need to uninstall and re-install Photoshop, then apply all the Photoshop upgrades from scratch.
But first, give us details about your setup:
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
A screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Touch Pad and Web Cam are not working after installing drivers also

Hiii
Synaptic Touch pad drivers are not working like not detecting the hardware so please help me on this
and
Webcam is not working like its not detecting even after installing cyberlink software given in the hp web site
please help me regarding this problems

1.Download hp support assistant.
2.Run it and go to the tab updates and tune-ups.
3.Click in the button check for updates. It will find you the updates.
4.Click in the button Download and Install.
5.When it finish restart your computer.
[link:http://www8.hp.com/us/en/campaigns/hpsupportassistant/hpsupport.html?jumpid=va_r602_us/en/any/psg/pl...
Also if it doesnt' work , you can also try :
1.Right click to the computer.
2.Click to the manage option.
3.Then select the device manager.
4.After that go to imagine devices and select your camera, then right click on it and select the option update the driver software do the same in the touchpad.
If and this doesn' t work unistall the drivers and install them again.

I've just installed CS6 creative suite mainly for photoshop CS6. It comes with camera raw 7.0.something, but need something newer to use my canon 6d. When I download camera raw 8.5 and install the raw converter doesnt work anymore, wont even open or isnt

I've just installed CS6 creative suite mainly for photoshop CS6. It comes with camera raw 7.0.something, but need something newer to use my canon 6d. When I download camera raw 8.5 and install the raw converter doesnt work anymore, wont even open or isnt available anymore in the plugin list. Tried to reinstall everything for a few times, but nothing helps.

When I search for updates the raw converter doesnt get update automaticly. Frustrating, is costing me the whole morning.

After upgrading to ios 8.1.1 my ipad 4 camera doesnt work i just got blank screen, but i still can use it for facetime, i supposed after upgrading to ios 8.1.2 it will fix but it doesnt work. i cannot restore to ios 7. hopefully, any suggestion to co

after upgrading to ios 8.1.1 my ipad 4 camera doesnt work i just got blank screen, but i still can use it for facetime, i supposed after upgrading to ios 8.1.2 it will fix but it doesnt work. i cannot restore to ios 7. hopefully, any suggestion to correct it? thank you

Hello pichastos,
Thanks for using Apple Support Communities.
To troubleshoot this issue where your camera is displaying a black screen, please follow the information outlined below.
You see a closed lens or black screen
If you see a closed lens or black screen when you open the Camera app, try these steps:
Make sure that there’s nothing blocking the camera lens. If you’re using a case, try removing it.
Force the app to close, then open the Camera app again.
Restart your device, then open the Camera app again.
If your device has a front and rear camera, try both cameras by tapping (camera swap icon). If you see the closed lens or black screen on only one camera, take your device to an Apple Retail Store or Authorized Service Provider for more help.
Get help with the camera on your iPhone, iPad, or iPod touch - Apple Support
Take care,
Alex H.

Can No Longer Get Camera Photos After Installing Mountain Lion

After installing Mountain Lion, I am no longer am able to see pictures from my digital camera thru the USB port. This camera has worked for years with my iMac, but not anymore. Anybody else having this issue after installing the newest system?
Dick

Paul_31:
I have not tried to import the photos directly into iPhoto. However, I did remove the SD card from the camera and plug it into a USB card reader, and my iMac would NOT read the photos that way either. I took the camera and plugged it into my Win. 7 laptop and the pictures showed up nicely, so I know the camera and the card are Ok. My iMac has been working strangely since I installed Mountain Lion. I'm getting lockups using iMovie too.
Dick

After installing ios7 on my iPhone 5s i can no longer share my photos and save photos to my camera roll. Even if i go to Settings and privacy then photos there is no access for me to do this. This includes FB, Viber and pic collage. How can I reinstall ?

After installing ios7 on my iphone 5s I can no loger share my photos fro my library and save my photos to my camera roll even if I go to Settings and tap Privacy, Photos, there is no provision to set Instagram On. This is also true with my FB, Viber, Pic collage. Please let me know how to rectify this? Should I reinstall ios7? How should I do it? Thank you.

After installing ios7 on my iphone 5s I can no loger share my photos fro my library and save my photos to my camera roll even if I go to Settings and tap Privacy, Photos, there is no provision to set Instagram On. This is also true with my FB, Viber, Pic collage. Please let me know how to rectify this? Should I reinstall ios7? How should I do it? Thank you.

Camera roll app gone after installing iPhoto

My Camera Roll app is no longer to be found on my Gen 3 iPad after installing iPhoto. I've reset my iPad, though i haven't erased all content and settings, and I cannot get it back. Am I relegated to the "scorched earth" solution of backing up and erasing all my data?

"If you are using the Camera app and take a shot, you can see your Camera Roll (bottom right) and when you tap on it, it will bring out the Camera Roll. Those shots are also in Photos app > Photos.
Note: There's no Camera Roll app."
Sorry, correction in the statement above : should be (bottom left).

Camera app doesn't work after installing a new screen

I have been fixing broken iPhone screens for quite some time now but have never come across something like this. After installing a new screen the camera app won't show the camera and the shutter never opens. I thought I didn't put one of the cables in right so I double checked and sure enough they were in good. I restored the phone and tried it again with no luck. I then switched out to another screen I found and the camera worked perfectly. This is so bizzarre to me but can anyone explain to me what is wrong? Or what has happened? I have never seen anything like this.

I keep getting an error message of (0xE80000001)!
Read here. iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting

After installing os-5 camera doesnt zoom

Similar Messages

Maybe you are looking for