After installing Snow Leopard several apps don't work anymore

Be aware: after installing SL you will find that Flip4Mac doesn't work (a beta upgrade must be downloaded). I have Speed Download as download manager, but I had to reconfigure it because downloads were not automatically redirected to Speed Download. MPEG Streamclip complained that the MPEG2-decoder wasn't installed; I had to redownload it from the Apple Store.
Wish Apple did a better testing before distributing

And further mentions:
If you already upgraded to Snow Leopard
You have to reinstall or restore your MPEG-2 Playback Component.
If you have a Time Machine backup of your System folder, then open the /System/Library/QuickTime folder, enter Time Machine and go back in time until you see the QuickTimeMPEG2.component file; select that file and then click Restore.
If you purchased the MPEG-2 Playback Component from the Apple Online Store, then you probably still have the DMG file that contains the installer. Use Spotlight to search for "QuickTimeMPEG2.dmg": if you find a file with that name, double-click it and then in the disk image, double-click the installer package for Intel Macs.
If you purchased the MPEG-2 Playback Component from the Apple Online Store but you can't find the QuickTimeMPEG2.dmg file, you can download the file again from the Apple Online Store if you remember the Apple ID used when you originally purchased it (if you forgot your Apple ID then go to Apple iforgot). Visit the Apple Online Store, click on "Account" in the store menu, then click "Downloadable Software Purchases," enter your Apple ID and password, and click the link to the QuickTime MPEG-2 Playback Component to download it again.
If you obtained the MPEG-2 Playback Component from the installation of Final Cut Studio, then you can reinstall it again from the Final Cut Studio DVD. Insert the DVD and use the Finder's Go menu > Go To Folder... command to get to the /Volumes/Final Cut Studio/Installer/Packages/ folder inside the DVD. Locate the QuickTimeMPEG2.pkg or the QuickTimeMPEG2Pro.pkg installer: double-click it to reinstall the MPEG-2 component.

Similar Messages

  • Hard drives damaged after installing Snow Leopard :(

    After installing Snow Leopard all software seemed to work fine. Then I found out that e-sata doesn't seem to work well with Snow.
    I've tried two different e-sata cards, including CalDigit's FASTA-2e, which CalDigit claims works fine with 10.6.
    My external enclosure appeared and immediately gave me a kernel panic. I tried several times with different working drives and now they are all heavily damaged. Kernal panic after kernal panic, I am noe having a difficult time accessing the data.
    Now here's the strange part...after going back to Leopard 10.5, my internal drives all seemed to be infected as well. After using Disk Warrior and apple's disc utility, I got those working ok.
    What could be going wrong here? I installed Snow. It was fast. But it wasn't worth it...at least not yet.
    If there's anything else I might be doing wrong or any way to fix these drives now, please let me know.
    Thanks all!

    It seems that Sonnet is not yet compatible with Snow Leopard either. That issue was covered here: http://discussions.apple.com/thread.jspa?threadID=2114442&tstart=0.
    Anyone know if RocketRAID eSATA for Mac works with Snow? Apple sells it...
    http://store.apple.com/us/product/TW106LL/A?mco=NzE2OTU5Nw
    Thanks!

  • Can't open any excel files after installing Snow Leopard

    I can't open any excel files after installing Snow Leopard. Is anyone else having this problem?
    I have a standard iWork '08 install. Has anyone experienced? And better yet, know of a fix?

    Welcome to Apple Discussions
    Most users who have had a problem opening Office files with the iWork apps after upgrading to Snow Leopard have the problem fixed by updating to the latest versions. For iWork '08 that is Pages 3.0.3 & Numbers 1.0.3. For iWork '09 it's Pages 4.0.2 & Numbers 2.0.2. I don't use Keynote, but it should also be updated. If you're not running the latest versions & Software Update says your software is up to date, make sure the applications are where the installer initially put them. The updaters are very picky. If the location is not where the updater is programmed to look or if the folder doesn't have the name the updater looks for, it will not work. The applications cannot be renamed or moved. They must be in the iWork '08 or iWork '09 folder in Applications. That iWork folder must be named iWork '08 or iWork '09. If it doesn't have the '08 or '09 Software Update won't find them & the updaters won't work.

  • Photo Booth not working after installing Snow Leopard

    unable to open Photo Booth after installing Snow Leopard. pop up saying my version is 2.03. unable to locate an update on App store. Any solution. ? Thanks to all

    that answered my question. great. my wife has a macbook pro 13 inch (aluminum unibody) and she was getting frustrated with photo booth not working. i was about to uninstall but this answer fixed the issue. thanks!

  • Opening Photo Files in Photo Shop CS3 after installing Snow Leopard.

    After installing Snow Leopard I could only open photo files in a Preview mode. I called Adobe and Apple and could not get a solution. So I called my local Mac tech person where I got the answer to my problem. What to do: Right click on an image file icon.(Do not open image.) Then go to: Get info. In the dropdown menu, Open with: Select Adobe Photoshop CS3.app or whatever app you desire. Then click change all. You have to do this just one time for each extention such as jpg, tif, etc. Trust this helps.

    Hello sean:
    I am not an expert in iPhoto, but people who post here are:
    http://discussions.apple.com/category.jspa?categoryID=143
    To try to address the browser problem, reset Safari and see if that helps. Also, try an alternate browser (I use Firefox that way) to see if the problem is system-wide. Also, there is a Safari forum here:
    http://discussions.apple.com/category.jspa?categoryID=169
    Barry

  • Met with a white screen after installing Snow Leopard on Macbook (mid 2007)

    After installing Snow Leopard on my Mid 2007 mac book pro I was prompted to restart. I restarted and the computer turned on but only got as far as a white screen that stays white with no further activity for an indefinite amount of time. I've restarted the computer a few times with the same results. How do I fix this and get past the white screen?!

    Try booting into "verbose mode".  That will cause a series of messages to appear on the screen during the boot process.  When that stalls (presuming it does so), write down the last few messages and post them as a reply.
    You might also try running the diagnostics that came with that Mac.  Depending on the model, you can boot with the "system restore disc" in the machine with the "D" key held down to run those.  Run the diagnostics several times.

  • After installing Snow Leopard problems with using any of my Helvetica fonts

    I've never really have a problem with any of apple's products until now.
    After installing Snow Leopard I've found problems with using any of my Helvetica fonts,
    which is a BIG problem if you work in DTP or print. You CAN'T remove the system version of Helvetica, and replace it with your own anymore.
    Also Flash CS4 seems to be a dead duck, as after about 5-6 seconds of loading the program it crashes with a "KERNPROTECTIONFAILURE".
    <title edited by host>

    Thanks Tom but the original post title was "Work in DTP, don't install snow leopard", but of course apple were unhappy with the title. I know the issue/problem has been discussed for months, the real problem is that it shouldn't be a problem which everyone has to find work arounds for.
    After 4 days of playing about, I've finally got flash CS4 working and Quarkxpress was also a big problem for a few months. Printer description (PPD) files which snow leopard doesn't like, but worked in tiger & leopard.....means I can't use my two A3 inkjets for proofing anymore.
    I'm just disappointed by snow leopard

  • After installing snow leopard excel no longer in correct format

    After installing Snow Leopard, my excel files only open in text edit and my powerpoints are scrambled or cannot be opened.
    Is there a way of restoring them to at least their original form before the update or do I need to install the latest Word?

    Assuming Office is still installed, you can change your Excel files so they open in Excel again.  Right click on one of them. Get Info. Change "Open With" to Excel. Change All.
    You didn't say if your Powerpoint files are also opening in Textedit. If so,I would expect them to be scrambled. But, then again, so should your Excel files. If they are opening in Textedit, do the same procedure as above with a Powerpoint file so it opens in Powerpoint.
    You will have to do the same thing for the different vesions of Excel and Powerpoint files you might have such as XLS, XLSX, PPT and whatever other extensions Office uses.  Plus I assume your Word files don't open in Word either so you have DOC and DOCX that would need to be changed to open in Word.
    If none of that works, you might have to reinstall Office.

  • After installing snow leopard most applications appear to not respond

    After installing snow leopard most applications appear "not responding"
    Message was edited by: john770

    Hi John, Welcome to Apple Discussions.
    Please go to "My Settings"and give us more information about your Mac. It's on this page at upper right ➦
    On your  menu choose "About this Mac" and fill in : Version, Model, Processor and Memory. Also, your "available" hard drive space which will will be at the bottom of your Finder window (xx GB available).
    Try Safe Mode (It will take more time to startup in Safe Mode because it runs a directory check.)
    If your apps function correctly that way, go to System Preferences >> Accounts >> Login Items, and remove them. Boot normally and test. If not go to Users/(yourname)/Library/Contextual Menu Items and move whatever is there to the desktop. Then do the same with /Library/Contextual Menu Items. Lastly, try moving ~(yourHome)/Library/Fonts to your desktop and restarting.
    Log out/in or restart, if that sorts it start putting items back one at a time until you find the culprit.
    -mj

  • I am unable to load webpages after installing snow leopard

    I am currently typing this on my iPhone. After installing snow leopard this morning I am unable to connect to either safari or Firefox. Both come up with server errors and will not load the webpages. The Internet is still connected over wifi and I am able to both send and receive emails. I am Oma MacBook running the Internet on an at home wifi connection. Please help!

    Why are you posting this in the Mountain Lion forum?

  • Unable to print on HP J6480 after installing Snow Leopard

    After installing Snow Leopard I've been unable to print from my HP J6480.  I get an error message saying to check for updates from Apple and the manufacturer.  Apple shows no more updates.  I've added a printer driver v2.6 from Apple, but that hasn't helped.  Had no problems printing before this.  Any suggestions?

    Never mind.  Just went to Hewlett Packard site and the suggestion was to reinstall the printer.  I did so and it now works.  Of course, the reinstall wiped out other printers I had on there....Adding Snow Leopard has resulted in much more work than I thought it would be!

  • Audio capture lost after installing snow leopard

    Has anyone else had problems loosing their audio capture in Premiere cs4 after installing Snow Leopard?

    Just wondering, is that a plug-in for Premiere?
    Similar problem with After Effects maybe?...
    http://blogs.adobe.com/keyframes/2009/08/after_effects_and_snow_leopard.html

  • S key will not shift to a cap after installing snow leopard.

    s key will not shift to cap. Cap loc will work. Tried new keyboard still no go. Happened after installing snow leopard. No other keys affected.
    What is going on?
    Message was edited by: Mike Greener

    Open the Speech pane of System Preferences and check whether either the listening key or the speech key has become set to that keystroke; if so, change the setting.
    (48871)

  • I can't scan from my Canon Pixma 882 after installing Snow Leopard 10.6.3.  How can I get my scanner to work?

    I can't scan from my Canon Pixma 882 after installing Snow Leopard 10.6.3. I did get the printer to work after downloading the printer software from Apple. I used to have 10.4.1.  How can I get my scanner to work?

    Check here to see if there is an updated driver available for it:
    Printer and Scanner software available for download:
    http://support.apple.com/kb/HT3669?viewlocale=en_US

  • Why have my plug ins crashed after installing snow leopard ?

    After installing snow leopards i now receive a messages saying my plug ins are disabled and shockwave crashed???

    All plugins or just flash player plugin?  If the latter download from the adobe download page and reinsitall.  Current version is 11.2.202.235.
    Also, did you check software update and install all the available snow leopard updates?

Maybe you are looking for