After installing the DR Driver on my Audigy 2 Value, I can no longer access the Equali

Installed the latest driver via the web update for my Audigy 2 value. When I reboot my machine and try to access the equalizer, it gives me a message saying "The audio device supported by this device is not detected etc". It worked fine before I installed this driver.
Any help appreciated.
Gyre

Can you try rolling back to the previous driver (if you have a restore point), or reinstalling this update? Does that have any effect?
If you have any onboard audio make sure that's fully disabled in the BIOS aswell.
Cat

Similar Messages

HT1476 Why after installing i0s7.0 to my Apple 4 I phone I can no longer charge it with a hydro connection. It did it before this update

Why after installing i0S7 to my Apple i phone 4 I can no longer charge my phone by plugging it into electricity. I could before and now since this update it now longer works. How can I fix this?

Are you using a genuine Apple power adapter? iOS 7 will prevent certain non-Apple power adapters from operating due to safety concerns.
Counterfeit chargers are dangerous and potentially lethal.
http://www.apple.com/support/usbadapter-takeback/
The program ends October 18, so don't wait.

After installing Mountain Lion two drives on my network cannot be accessed. I am using Parallels to utilize QuickBooks ERP. The programs and data are on the drives that I can no longer access. Suggestions?

After installing Mountain Lion on my Mac Book Pro, I can no longer access two shared drives. Diagostics cannot solve the problem. I am using Parallels to run Qucikbooks ERP on these shared drives. How do I get my Mac to see these drives and access them?

Don't know what to tell you, but I also have an AEBS-Gen5 with a MBP Retina and Mac Mini using WiFi. Both are running Mountain Lion and I don't have any WiFi connection issues. Two iPhones in the household use WiFi with no issues along with a printer and 2 Windows 7 laptops.
First thing I would try is to shutdown all computers connected to the AEBS. Then power off the AEBS and finally the cable/DSL modem. Then reverse the order and power on the cable modem, wait for all the lights to be solid, power on the AEBS, wait for the light to show solid green; then power up a computer that uses WiFi.
If the above doesn't work, you might try repairing permissions via Disk Utility. If that doesn't help maybe a PRAM reset would work.

After installing the 64 bit version of itunes my iphone still won't sync. I get the explantation that I mobile driver application did not download and i need to remove and reinstall itunes (which I have done numberous times). Any help?

After installing the 64 bit version of itunes my iphone still won't sync. I get the explantation that I mobile driver application did not download and i need to remove and reinstall itunes (which I have done numberous times). Any help?

Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, does your device connect without that message now?

Printing problems after installing the Epson Printer Driver 2.16

Has anyone experienced any problems after installing the Epson Printer Driver 2.16 through Software Update? I am having problems printing. It denotes an error message, specifically the rastertoescpii.app isn't working?

Oops, wanted everyone to know that the driver that Software Update downloaded and installed was 2.18, not 2.16 (which was the last one that worked for me). I just got done downloading the 2.18 driver directly from the Apple support website and installing it. Guess what? My printer is now working and everything is fine. If you are having issues, I suggest this route. Guess I solved my own problem, but hope this helps someone else.

Blue screen after installing the X-Fi driv

Hello!
The problem is - after installing the X-Fi Fataliti drivers on to brand clean Win XP Pro SP2, I get Blue screen. After uninstalling those drivers in safe mode I downloaded last version from here
http://us.creative.com/support/downloads/download2.asp?MainCategory=209&Product=4000&dlcent ric=9756&Product_Name=Sound+Blaster+X%2DFi+Fatalty &filetype=&OSName=Windows+XP
After installing that driver - the same problem. Blue screen with reference on to ha20x2k.sys
The system is the following: Asus MB p5gplx, Intel pentium 4 3.2 HT, D-link Air-Extreme WiFi PCI card, Sparkle 6600GT PCI Express video chip.
How to make the system li've with your driversMessage Edited by timur555 on 04-04-2007:27 PM

I'm completely exhausted.
I cant make this "outstanding, the most powerfull" soundcard work.
The last thing was - i deleted all the creative soft and installed only the driver. After system comes, and windows desktop is visible, the computer freezes and only hard reset can wake it up.
What the problem is??
I've sent this issue with my system configuration to creative, filled the form on the site.
Just NO RESPONCE. Should I just throw my soundblaster away?

Is it necessary to keep Premiere Pro CC on my hard drive after installing the newer "2014" version?

After installing the latest version, I discovered that the old Pro CC wasn't replaced by the new "2014." So I'm wondering if it's necessary for any reason to keep the old one, or can I go through the "Uninstall" routine without doing any harm to the new one.

If your only concern is doing damage to the 2014 version, I suspect Adobe built it so that you could remove the old versions and not harm the new ones.
On the other hand, it is good practice to keep the old versions as long as you can. As the others mentioned above you can save projects one version down and if you remove the old Pr you will have to convert your old projects to 2014 if you want to open them. Finally, I am sure Adobe will remove the option to download the old versions eventually and if you have removed them you may be in trouble if you come across an issue that requires an older version.
My advise would be to keep the old versions until Adobe releases a few patches for the 2014 versions just incase some major bugs begin to pop up.

After iPhoto upgrade i can no longer access the photos stored on my external hard drive, after iPhoto upgrade i can no longer access the photos stored on my external hard drive

I was just about to order a photo book, using photos stored on an external hard drive. I organised the book and pressed 'buy'. IPhotos instructed me that I needed to upgrade and so I went on the ASpp store, bought the upgrade and installed as directed. I then used the iPhoto Library upgrader as directed.
After the iPhoto upgrade I can no longer access the photos stored on my external hard drive. I am able to access the photos stored on my internal hard drive - the remainder (including the photo album) seem to have vanished into thin air.
Any suggestions please?

What format is the external drive?

After installing the most recent iTunes update/version iTunes will no longer run on my PC. I receive a window with the Microsoft error code R6034

After installing the most recent iTunes update/version iTunes will no longer run on my PC (Windows 7). I receive multiple error windows with the Microsoft error code R6034. Microsoft's Help site states that this error occurs when a driver attempts to access the C++ library without a "Manifest". I do not know what a manifest is, but apparently any attempt to directly access the C++ library is not permitted. The site instructs the viewer to contact the application developer.

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

How do you upgrade OS X server 4.0 to another drive after installing on primary drive

I've upgraded OS X Server to version 4.0 after installing the Yosemite OS X. As usual, the server does not work properly after the upgrade. I've installed Yosemite on another boot drive to rebuild the system. I'm trying to upgrade the new install of Yosemite to the Server 4.0 version but when clicking the upgrade button, it just sits there with the wheel spinning. Has anyone seen this and how can I get the copy downloaded again to install version 4.0 of OS X Server?

I appreciate both of your prompt replies. According to the following support page (http://docs.info.apple.com/article.html?artnum=107037), I only needed OS X 10.1 or later (more specifically, it says that 10.0.X or earlier cannot be upgraded without erasing). This page was directly referenced by this page (http://docs.info.apple.com/article.html?artnum=301270) which is on the very post that Ferd referenced ("10.4 Tiger Upgrade: Decision tree+Checklist" at http://discussions.apple.com/thread.jspa?threadID=121773). I can find nothing on official Apple websites that says anything about needing OS X 10.2 to upgrade to 10.4. The bottom line is that most of my harddrive is consumed with my music (approx 15 MB) and there is no convenient way for me to back it up or move it without buying an external hard drive. It just seems absurd to me that in order to use my new $300 iPod that I need to both invest $120 in new software and then another $100-200+ in an external hard drive so that said new software can be installed over my existing data. It's really bad enough that Apple gives you no charger and no case for the iPod, charges you for new software versions, and then makes their new software so incompatible that you have to erase your hard drive just to install it. Exactly why do people love their Macs over their PCs? If I have to buy an external hard drive, why shouldn't I simply take all my data off of my iBook and be done with Macs forever?

Troubles after installing the latest download

After installing the download, I can no longer see my sms conversations after I respond to them, The whole conversation disappears and the only way to see it is to text the person again or go to their contact page and hit the sms button, this is really annoyng. I have also lost an application I installed through the classic emulator. Does anyone know how to fix these issues?
Post relates to: Pre p100eww (Sprint)

For the SMS issue see if this is the same issue: http://forums.palm.com/palm/board/message?board.id=webossoftware&message.id=7152. If so there is some instructions on how to resolve this issue. For the classic application check and see if you are on the current update by going to updates or opening the app catalog and clicking on the shopping bag. If you are check and see if the prc file is still in the apps folder on the USB drive.

After installing the windows 7 on the Macbook pro, i accidentally disabled the Macintosh hd and Recovery Hd and now now cant see them on start up

After installing the windows 7 on the Macbook pro, i accidentally disabled the Macintosh hd and Recovery Hd and now now cant see them on start up
I need to boot to macintosh but i cant see the drive nor to restore to the fastory settings through recovery HD, What can i do

hold down the option key during boot it give you the option of what parition you wish to boot into

After installing the new Lion OSX, I get "power PC applications no longer supported" on things. How to fix?

After installing the new Lion OSX, I get "power PC applications no longer supported" on things. How to fix?

Silly rabbit wrote:
Ah, you didn't read the fine print on installing Lion, did you? None of your old software will run in Lion.
You have two choices:
A) Buy all new or updated software
B) Partition the hard drive and install an older version of OSX to run your older apps.
You did not give us any idea of what PowerPC apps you were running, so additional options:
C) Restore to Snow Leopard
D) Install Snow Leopard (and Rosetta which runs PowerPC apps) in Parallels 7 in Lion:
Installation instructions here:
http://forums.macrumors.com/showthread.php?t=1365439

After install the lion ، the computer it's became slow

hi
After install the lion ، the computer became slow , i don't know why . my macbook Pro Core I7 4GB ram
and Adobe photoshop cs5 very very very slow i can't work with it please Help Me , My job depends on Photoshop
i thinking to back the snow leopard by Time machine if i don't find any Solution ,,, please help me

Is their any way I can delete or remove the lastest update ?
You can't "downgrade" with the present (newer) system in place. The only way you can do it is if you either saved the previous installer or made a bootable clone (or Time Machine) before you updated. The reason: you need to boot off a different drive, wipe your disk, and then fresh install the previous system (or clone it back).
You can also check in Activity Monitor (Applications > Utilities) to see which processes/apps are consuming a lot of RAM, and, check on the bottom to see how much RAM is being used, swapped, etc.
here is an example of what that looks like:
First shot is showing that the main use of RAM is by Firefox and kernel_task (part of the system):
Second shot shows the RAM being used/available (lloks good here):
If indexing has finished, can you post similar screenshots of your machine please?
And, a last question: how much free space do you have left on your hard drive? Pleae post that info as well.

How to install iWork after installing the iOS7

How to install iWork after installing the iOS7.

Oh, but it is since you have already erase the volume. What more do you wish to do? If you want to do an online Internet Recovery and your computer is able to do so, then do this:
Install OS X Using Internet Recovery
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
This should restore the version of OS X originally pre-installed on the computer.

After installing the DR Driver on my Audigy 2 Value, I can no longer access the Equali

Similar Messages

Maybe you are looking for