After installing the latest Flash, I always get "Flash has crashed" msg???

Running FF 28.0 on a Mac OSX 10.6.8 with Flash Plug-in version 13.0.0.182. The Flash plug-in works on Chrome. It's also not working in Safari - no error message, just no playback.

We can see from your sytsem details aside that you are using Flash 13 that is probably the cause of your crash on an older Mac.
I am not sure upgrading OS X would solve that problem as the issue may be hardware related.
Upgrading the OS would be a sensible idea still; if of course your hardware is compatible. The upgrade may even be free
* https://www.apple.com/uk/osx/how-to-upgrade/

Similar Messages

  • My new imac won't operate youtube even after installing the latest flash

    my new imac won't operate youtube even after installing the latest flash

    Problem solved!
    I had downloaded and then installed Flash, and restarted. 
    The problem?  I was expecting Youtube to work as on my old PC, where you get a little pop-up menu at the bottom of the TV screen to play. pause etc.  That won't happen on a Mac until  you click on the oblong that says Flash in the middle - I didn't know that!
    Hooray!

  • After installing the latest version of ITunes I get an error message that says this application has failed to start because MSVCR80.dll was not found.  how do I get Itunes to start working again?

    After installing the latest version of ITunes I get an error message that says this application has failed to start because MSVCR80.dll was not found.  how do I get Itunes to start working again?

    See... Unable to install or open > http://support.apple.com/kb/TS5376
    Also See this User Tip by turingtest2
    https://discussions.apple.com/docs/DOC-6562

  • TS1717 I get the following error message after installing the latest version of itunes via auto update:  "the itunes Library file cannot be saved. An unknown error occurred (-54). Has anyone ever seen this message and anyone have a suggestion what to do?

    I get the following error message after installing the latest version of itunes via auto update:  "the itunes Library file cannot be saved. An unknown error occurred (-54). Has anyone ever seen this message and anyone have a suggestion what to do?

    Hi pholewinski!
    I have a couple of articles for you here that I believe will help you with this issue. The first is an article on advanced troubleshooting, and it can be found here:
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/ts3297
    If following that article's steps doesn't take care of the issue, you can try the things listed in this article, which is about permissions issues in iTunes:
    iTunes: Missing folder or incorrect permissions may prevent authorization
    http://support.apple.com/kb/TS1277
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • I have uninstalled and installed the latest Flash Player 17 many times.  I am currently working on a yearbook site that gets locked every time I try to add photos.  I have also received a plug in error even though the plug in box is checked.  I have a Mac

    I have uninstalled and installed the latest Flash Player 17 many times.  I am currently working on a yearbook site that gets locked every time I try to add photos.  I have also received a plug in error even though the plug in box is checked.  I have a MacBook Pro.  Please help!!!

    To give you any useful advice, I'm going to need to know more about your computer and browser:
    https://forums.adobe.com/message/5249945#5249945

  • Keep getting the error I need to install the latest flash player, although I did

    Hi all.
    I have a very rare issue with flash player.
    First some information:
    I'm using Windows Vista 64-bit, and the latest Mozilla Firefox.
    When I want to wath a movie on Facebook, ik keep getting the message 'Upgrade needed for Flash player. To view this, you need to download and install the latest version of Adobe Flash Player'
    I already did this like a thousand times..
    I also first used the uninstaller, than installed it again, but I keep getting the message. I have the same problem with IE also.
    Hope you can help me.
    Grts

    Hello.
    Thanks for the e-mail.
    But when I look in IE, i can't see it in the list, it isn't there.
    When I look in FF, The only one I see is called 'Shockwave Flash 10.0.2.54'
    Thank you,
    Jarno.
    Date: Wed, 24 Mar 2010 12:11:54 -0600
    From: [email protected]
    To: [email protected]
    Subject: Keep getting the error I need to install the latest flash player, although I did
    Thanks. Using IE go to Tools>Manage add ons and find Shockwave Flash Object..ActiveX Control..Flash10e.ocx and make sure it is enabled.
    Do the same thing using FF and look in plug-ins for SWF vs 10.0.45.2 and make sure it is enabled.
    I would also check a few other sites as it could be this is isolated to Facebook.
    Thanks,
    eidnolb
    >

  • After installing the latest itunes/quicktime update, I can no longer access the itunes store and my iphone does not complete syncing. What can I do to fix this?

    After installing the latest itunes/quicktime update I can no longer acces the itunes store nad my iphone does not complete syncing. What can I do to fix this?  I have tried uninstalling and reinstalling itunes.  I have uninstalled and reinstalled windows updates. I have checked the firewall settings. what else?

    The problem is with version 10.4.1.  I had to reload 10.3 to get it to work.  The recommendation from a previous poster worked for me.  Here was their list of steps:
    Go to Control Panel>Programs>Uninstall
    2.  Uninstall the following Apple programs in the following order:
         a. iTunes
         b. QuickTime
         c. Apple Software Update
         d. Apple Mobile Devices Support
         e. Bonjour
         f.  Apple Appllcation Support
    3.  Reboot PC
    4.  Find, Download and Install iTunes 10.3 (you can find it at FileHippo.com)
    If you start iTunes now you will get an error message saying that the current iTunes library was created by a newer version of iTunes.  To correct this:
    5.  Go to your Music>iTunes folder and delete the "iTunes Library.itl" database file
    6.  Within this iTunes folder find and open the "Previous iTunes Libraries" folder and locate the most recently dated "iTunes Library (date).itl" database file.
    7.  Copy and Paste this file back into the iTunes folder
    8.  Rename this "iTunes Library (date).itl" file by removing the date.  It should say "iTunes Library.itl"
    9.  Reboot PC

  • The forward, back, refresh, and stop buttons are not working. Even after installing the latest version. Anyone else having this issue?

    The forward, back, refresh, and stop buttons are not working. Even after installing the latest Firefox update. Also my home page stopped loading upon startup even tho I have it setup to do so. Anyone else experiencing these issues? This is my second request for help and of course, Firefox on-line support is always closed.

    Those are all symptoms of a problem with the places.sqlite file, for details see http://kb.mozillazine.org/Locked_or_damaged_places.sqlite

  • TS3694 I'm running XP. After downloading the latest itunes update i get a "Runtime error" and can't start itunes. Help?

    I'm running XP. After downloading the latest itunes update i get a "Runtime error" and can't start itunes. Help?

    iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue
    Solving MSVCR80 issue and Windows iTunes install issues.
    Thanks to user turingtest2 for this solution.
    Solving MSVCR80 issue and Windows iTunes install issues.
    If the above doesn’t do the trick entirely, then use the instructions in the following as it applies to the version of Windows you are using:
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    You may be required to boot into safe mode to complete the folder deletion process.

  • No sound after installing the latest drivers

    After installing the latest drivers for X-fi xtrememusic, 2.8.003 I have no sound. Also my creative console is stuck in Entertainment Mode, it won't switch to any other mode. Help please?

    Pheary wrote:
    ?My best guess is this is some bizarre driver/registry problem, since it mostly works perfect in XP, but barely at all in Vista.
    Well, i don't have a solution for you, but if your soundcard + hub act like that even under xp after a few weeks i would suggest to get a replacement, cause there might be a hardware-error that causes your problem. A software/driver problem sounds very unlikely to me. That your having problems under Vista, isn't strange at all, cause there are still no final drivers relaesed for Vista and the support of the hub is rather barebone at the moment. Stormblade

  • After installing the latest upgrade firefox just hangs when opening - was fine before. have tried deleting restore session but worse not better now

    after installing the latest upgrade firefox just hangs when opening - was fine before. have tried deleting restore session but worse not better now. no change with firewall.
    == This happened ==
    Every time Firefox opened
    == yesterday, after installing the upgrade ==
    == User Agent ==
    Opera/9.80 (Windows NT 5.1; U; en-GB) Presto/2.5.24 Version/10.54

    I'm using Mac OS 10.4.11 & even typing this message the characters appear so slowly that I could get a hammer and chisel and inscribe the words faster than the new Firefox runs. WTF?

  • While installing the latest iTunes version I get the following msg:"Service Apple Mobile Device failed to start.Verify that you have sufficient privileges to start system services. I already tried it from the installer Running it as Administrator

    While installing the latest iTunes version I get the following msg:"Service Apple Mobile Device failed to start.Verify that you have sufficient privileges to start system services. I already tried it from the installer Running it as Administrator and still get the same message.  I click "ignore" and finish the installation but when I try to open it I get this "Runtime Error! R6034 An application has made an attempt to load the C runtime library incorrectly."  I already uninstalled iTunes and all other applications involved and re-installed itunes from the itunes site and the problem persists. Please help!

    Solving MSVCR80 issue and Windows iTunes install issues.

  • My iPhoto keeps crashing after installing the latest update, can't do anything!

    My iPhoto keeps crashing after installing the latest update, can't do anything! It used to crash when importing but now I'm at the point where I open the software and after 2 seconds it crashes (nothing connected either). What to do? Can't access any photos

    Try this:  launch iPhoto with the Option key held down and create a new, test library.  Import some photos and check to see if the same problem persists. If you can create a new library and import some test photos then the problem lies with your original library. 
    If that's the case make a temporary, backup copy (if you don't already have a backup copy) of the library and apply the two fixes below in order as needed:
    Fix #1
    Launch iPhoto with the Command+Option keys held down and rebuild the library.
    Select the options identified in the screenshot. 
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    Download iPhoto Library Manager and launch.
    Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
    Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
    In the next  window name the new library and select the location you want it to be placed.
    Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    If iPhoto crashes while trying to create a new library then try this:
    Make a temporary, backup copy (if you don't already have a backup copy) of the library and try the following:
    1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
         User/Home()/Library/ Preferences folder.
    2 - delete iPhoto's cache file, Cache.db, that is located in your
         User/Home()/Library/Caches/com.apple.iPhoto folder. 
    Click to view full size
    3 - launch iPhoto and try again.
    NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto.  You'll also have to reset the iPhoto's various preferences.
    If that fails to help a reinstall of iPhoto is indicated. To do so you'll have to delete the current application and all files with "iPhoto" in the file name with either a .PKG or .BOM extension that reside in the HD/Library/Receipts folder and from the /var/db/receipts/  folder,
    Click to view full size
    Then install iPhoto from the disk it came on originally and apply all relavant updaters.
    P.S.  If you're still running Tiger, 10.4.6, then the above may not apply.  If you're running a newer system you should update your profile so we have a better idea of where you're at.
    OT

  • After installing the latest IOS 5, my phone went off and all i can see now is an apple logo.i can´t even open it.. what to do now?pleas help.. thanksafter installing the latest IOS 5, my phone went off and all i can see now is an apple logo.i can´t even o

    after installing the latest IOS 5 on my iphone 4, my phone went off and all i can see now is an apple logo.i can´t even open it.. what to do now?please help.. thanks

    thanks a lot.. its ok now..

  • After installing the latest version of iTunes , I can no longer export files from EZ Vinyl Converter to iTunes. I tried restoring an older version which accepted these files, but that version no longer will open my library. I have been archiving my albums

    After installing the latest version of iTunes, I can no longer export music files converted by EZ Vinyl Conversion software to iTunes, which is the only export option available in the software. I have been converting my vinyl records, tapes and cd's to MP3 files in iTunes for about a year now, and have well over 1000 man-hours invested in this effort. I tried restoring the last version of iTunes, but it will no longer read my library, as, apparently, the new version modified the library file(s) in some way. I want to reenable this export-import function to finish my archival. What is necessary ???

    Apparently, security programs like Macafee and Norton view Itunes updates as new programs and block then from access. If you add Itunes to the list of exemptions, it solves the problem.

Maybe you are looking for