After installing to iOS 5 on my Mac Book, is there anyway to retrieve MS Office documents or Appleworks documents?

I understand that much. On my MAC Mini, if you look above at original post, I CAN see both OS while in the Windows 7 partition or the MAC OS. This is NOT the case on my iMac. Again, when in the MAC OS I can see the windows partion and move information between the two that way. When in the WINDOWS partition, the only one that shows is the Windows OS from my computer or network. The only way you can tell its even a MAC is the bootcamp icon in the bottom right corner of toolbar. Both have same version of MAC OS so both should work same way.. When i double click on my computer, it should show both the Windows drive AND the MAC (as does my mini and another iMac 21.5 that i have). This iMac does not do that - only shows windows.

Similar Messages

My wifi is very slow after installing mountain lion on my Mac book pro

My wifi is very very slow after installing mountain lion on my MacBook pro.
What can I do?

Ha ha, I misread that as "My wife is very slow after installing mountain lion on my Mac book pro"
BTW on my MBPro (late 2009 with max RAM) Mountain Lion runs very well with no slowing down.

Can i install mac osx back again after installing windows 7 on my mac book a1181?

i have apple mac book a1181 white, but i had problem logging on as it was secured by a password, and i allready lost my recovery dvd, so i installed windows 7 on my mac book a1181 by deleting its partition from GTP to NTFS but i experienced problems after installing windows 7 as sound was not comming as i could not find sound drivers for macintosh, so now i plan again to restore my apple macbook a1181 back by reinstalling mac osx 10.5.8, how can i again install mac osx on my notebook and is it possible to re-install mac on my notebook? please give me some help.

Insert your OS X install disc and restart holding the C key, hold it down until you see the Apple logo and spinning gear. Choose your language and at the next screen from the top menu bar select Utilities-Disk Utility. Select your internal hard drive, click on the Partition tab and select 1 partition. Click on the Options button and select GUID partition scheme. Click OK. Choose to format the drive as Mac OS Extended Journaled. When Disk Utility is done and your drive is properly partitioned and formatted quit DU and go back to the installer screen and reinstall OS X. When you're up and running run software update a couple times to get everything up to date as far as you can with 10.5.8. Then consider upgrading to OS X 10.6.8 Snow Leopard for $19.99 here http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard

After install OS X Mavericks, my Mac book pro turn on and navigate in the web slow

Hi, please help me with this problem:
after i installed OS X Mavericks in my Mac book pro is turn on slow and the access to the web pages is slow too. Besides the updated to the iMovie does`nt work (not install, appear a window: error unknow to install.
please help me. Tks.
Jose

Hi ..
The startup disk may need repairing ...
Launch Disk Utility located in HD > Applications > Utillities
Select the startup disk on the left then select the First Aid tab.
Click: Verify Disk (not Verify Disk Permissions)
If DU reports errors, restart your Mac while holding down the Command + R keys. From there you should be able to acces the built in utilities in OS X Recovery
Make sure to back up all important files first before using OS X Recovery.
Make sure there's enough free storage space ...
Control click the MacintoshHD icon on your desktop or open the Finder, control click startup disk icon then click Get Info.
You'll see Available and Capacity. Make sure there's at least 15% available disk space.

I have Logic on my iMac and want to install it on my new mac book but my mac book doesn't have a dvd drive. I tried to download the upgrade but it looks for an older version. How do I get Logic on the Mac book ?

I would like to install logic on my new mac book but there is no dvd drive. I tried to downlaod the upgrade but that didn't work. How do I download it for the first time?
Thanks!

You can only use the App Store version to reinstall on your new Mac if you bought Logic via the App Store in the first place.... and then it will appear under the Purchases tab in the Mac App Store App so long as you are signed in using the same Apple ID you used to purchase Logic via the App store in the first place.
If you bought the DVD edition of Logic Studio then you must initially install using those original DVDs to begin with and then update to the latest version of your version of Logic via software updates.
No DVD drive? Buy an external one.. Amazon do a very cheap basic one that works well..
or...
Use Remote Disk if you still have your older Mac which has a built in DVD drive...
http://support.apple.com/kb/HT5287?viewlocale=en_US&locale=en_US

I have installed windows 8 on my mac book pro with bootcamp 4 and the issue is whenever i open windows 8 , It hangs after 15 minutes and does not work . How to resolve this issue?

I have installed windows 8 on my mac book pro with bootcamp 4 and the issue is whenever i open windows 8 , It hangs after 15 minutes and does not work . How to resolve this issue? Is it compatibility issue ?

Please also see Boot Camp: Set the default operating system.

Does anybody know how I can get my Mac Book Pro back, which was stolen during a presentation I was attending. I have the store receipt, however I had not installed i Cloud in my mac Book?

Does anybody know how I can get my Mac Book Pro back, which was stolen after a class I taught?
I have the store receipt, its serial number, however I had not installed i Cloud on my Mac Book and I'm not able to find my Mac back.
Thanks for helping me!

Sorry to say but you are out of luck.
What To Do If Your Mac Is Lost Or Stolen
If you activated Find My Mac before it was lost or stolen, you can track it only if it is connected to the Internet by Wi-Fi. What you cannot do is track your computer using a serial number or other identifying number. You cannot expect Apple or anyone else to find your computer for you. You cannot recover your loss unless you insure your device for such loss. It is not covered by your warranty. Be sure to report the loss or theft to the local police. Have the serial number handy. If your Mac is found it cannot be returned to you if you don’t have the serial number and proof of purchase.
Find My Mac can be used from Find My Phone at iCloud.com and via Find My Phone on your iDevice.
      The following is third-party anti-theft software:
           1. STEM 2.1
           2. MacPhoneHome 3.5
           3. MacTrack 7.5.0
           4. VUWER 1.7
           5. Sneaky Bastar* 0.2.0
           6. Undercover 5.1.1
           7. LoJack for Laptops
           8. Hidden 2.0
           9. Prey 0.6.2

I need a serial Number for lightroom and photoshop. Its working on the imac already, I am paying. Now want to install on the mac book. There are no adobe-mails...

I need a serial Number for lightroom and photoshop. Its working on the imac already, I am paying. Now want to install on the mac book. There are no adobe-mails...

dear jeff,
its both the newest versions downloaded at adobe.com <http://adobe.com/>
after testing i signed the contracted and i am paying
the mail with the serial number got lost
both apps are working on my imac
now the should be installed on my book
there are no informations in creative cloud about my problem.
Am 04.03.2015 um 22:41 schrieb Jeff A Wright <[email protected]>:
I need a serial Number for lightroom and photoshop. Its working on the imac already, I am paying. Now want to install on the mac book. There are no adobe-mails...
created by Jeff A Wright <https://forums.adobe.com/people/JeffAWright> in Creative Cloud Download & Install - View the full discussion <https://forums.adobe.com/message/7252990#7252990>
Berndh38291059 what version of Photoshop and Lightroom are you installing? Do you receive any specific error messages?
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7252990#7252990 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7252990#7252990
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Creative Cloud Download & Install by email <mailto:[email protected]dobe-v7.hosted.jivesoftwa re.com> or at Adobe Community <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=47 86>
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624 <https://forums.adobe.com/thread/1516624>.
Bernd Hoff
Fotoproduktion
Stoffeler Str. 26
D- 40227 Düsseldorf
+49 211 37 05 14
+49 171 642 42 07
[email protected]
berndhoff.de

I can't Install my updates on my mac book , it starts to install and a box pops up saying i don't have permission to installpermission

I can't Install my updates on my mac book , it starts to install and a box pops up saying i don't have permission to install

So, then, after you click the Install button you receive the permissions error dialog? Again, are you logged into an Admin account?
Have you tried:
Repair the Hard Drive and Permissions - Lion/Mountain Lion
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
Also, please check the settings on your startup drive. Select it. Press COMMAND-I to open the Get Info window, then open the bottom-most panel and check the settings. They should look like this:

After updating to Mavericks on my Mac Book Pro I have 3 user accounts, all me all admin

After updating to Mavericks on my Mac Book Pro I have 3 user accounts, all me and all admins. I have gone to system preferences>users & groups and tried to select the users I want to delete and press - to get rid of them, but it wont even let me click on them or select them in any way.

Are you trying to install a 32 bit or 64 bit version of Windows 8?
Which versions of Windows are supported with Boot Camp 5?
64-bit versions of Windows 8 and Windows 7 are supported using the Boot Camp 5 Support Software. If you need to use a 32-bit version, you need to use Boot Camp 4 Support Software, and you must use Windows 7. 32-bit versions of Windows 8 are not supported via Boot Camp.
You can get more info on BootCamp here:
http://support.apple.com/kb/HT5628

Installed Mountain lion on my Mac book pro. Now My IRONKEY flash drive is not launching.

Installed Mountain lion on my Mac book pro late 2011. After that my IRONKEY flash drive is not launching. Before it was launching OK.The flash drive has updated software.

You have some other problem with your boot drive that has corrupted data backed up to the TimeMacine drive.
My advice is to boot into each operating system and manually backup just your Users files each to separate regular external drives (no Timemachine or backup software) and disconnect.
Make a note of any serial numbers, emails, address book contacts, export bookmarks etc. that isn't typically in your users folders data.
You might be able to Winclone 3 the Windows as a whole thing as it's appearing not to have issues but it's your MacintoshHD partition that is so that will have to be rebuilt from scratch.
Most commonly used backup methods
If your OS X parititon doesn't boot, you can use this to recover files.
Create a data recovery/undelete external boot drive
Without any further detail about your machine I can't advise specifically what to do, but it involves using Disk Utility to Zero Erase (move slider one spot to the right or in 10.6 using Security Option) the ENTIRE boot drive and reformatting, then installing OSX fresh and then setting up BootCamp again.
If you wish to switch your boot drive for something better, this is a good time to do this.
Install/upgrade RAM or storage drive in Mac's
If your machine is capable of Internet Recovery, then use that, then upgrade.
If your machine came with 10.6 or earlier, then use the 10.6 install disks and work up from there.
Erase, formatting, OS X installs on Mac's

How to install elements 9 on a mac book pro? i click install icon but cannot start because it sais that is from unidentified developer

how to install elements 9 on a mac book pro? i click install icon but cannot start because it sais that is from unidentified developer
any suggestions?

Mac Unidentified Developer Issue
Here's how to open apps that apple should not be blocking:
http://www.imore.com/how-open-apps-unidentified-developer-os-x-mountain-lion

After installing iPhone Configutilities in my Mac, Personal Hotspot using USB is not working! Please help, I am using 10.7 Lion OS

After installing iPhone Configutilities in my Mac, Personal Hotspot using USB is not working! Please help, I am using 10.7 Lion OS

Did you talk to your carrier?

I am trying to install a program on my Mac Book Pro Retina from a Apple SuperDrive. Every time I run the installer, it says I do not have enough memory to install. However, I definitely have enough memory (186.74 GB). Any ideas why?

I am trying to install a program on my Mac Book Pro Retina from a Apple SuperDrive. Every time I run the installer, it says I do not have enough memory to install. However, I definitely have enough memory (186.74 GB). The program takes only 550 MB. Any ideas why?

Thanks for the clarification on the terms. I consider myself proficent at my computer, but not exactly in its inner-workings! I have 8 GB of memory installed.
I am still confused as to why I do not have any space for the program. This is the exact error message I get: "There is not enough free space on Macintosh HD disk. The Print Shop 2 application requires about 550 MB to be installed. Free some disk space and try again."
Thank you again for your help.

After upgrading to Mountain Lion my Mac Book pro takes 1min 15 to load sec to open, never took that long.

after upgrading to Mountain Lion my Mac Book pro takes 1min 15 to load

Apple made some changes to increase security that slowed the boot time.
Startup - Slow Boot
Startup - Slow Boot (2)
Startup - Slow Boot (3)

After installing to iOS 5 on my Mac Book, is there anyway to retrieve MS Office documents or Appleworks documents?

Similar Messages

Maybe you are looking for