After installing update takes much longer to go to sleep

After I installed the latest security update (2005-08) I noticed that my powerbook takes much longer now to go to sleep. In fact it can now take somewhere around 30 seconds to finally show me the blinking eye (or whatever that is called). Before the update, it went to sleep in just a few seconds, it never took that long. Has anyone else noticed this behavior?
This is a powerbook G4 with 10.4.2.

Ok, please forget about this post. It's amazing what a reboot can do
nick

Similar Messages

AE CC - saving projects takes much longer than in CS6

I've noticed that After Effects CC takes much longer to save my current project than previously (about 2-3 minutes). I'm used to saving quite often so this is slowing down my workflow.
The project was imported from AE CS6. I've tried starting a new project and importing the previous one manually (instead of a conversion). Same lag.
All unused footage has been taken out and the footage has been consolidated.
The AE CS6 project file and AE CC file are about 15mb so CC is not any bigger.
There are about 50 files in Arri Raw 3K, the rest is in DPX and ProRes 1080p.
I'm working from a Macbook Pro Retina 16GB Ram and all media and cache are on an external Lacie Big Disk thunderbolt Raid SSD.
My impression is that AE CC is indexing all the files before saving so it's going through all the RAW sequenced files. This could slow down the saving process quite a lot.
Is anyone experiencing the same lag time while saving projects?

I'm having the same issue on my PC, saving is taking much longer and is also happening every time I RAM preview. Very strange, and in fact now its having trouble accessing the save location, a local hard drive. any answers for this isse?

After installing VS 2013 my Excel/Word/PowerPoint 2010 student edition takes much longer to start-up...

Hi,
After installing Visual Studio Community 2013, my Excel/Word/PowerPoint 2010 student edition takes much longer to start-up. Whenever I open Excel/Work/PowerPoint, the Windows Installer configures VS Studio 2013 each time. Is this the normal behavior, can
I stop this?

Thank you for your response.
I actually found the answer I was looking for through a couple of URL's below:
1. This first URL walked me through everything I needed to do find the actual warning using the Event Viewer and then the fix. There are two command for the suggested fix (remove and addlocal registry items) but since I don't think MS Office 2010 student
edition came with VBA support (I could be wrong), I only did the REMOVE command. After that, launching my Office apps now only takes a couple of seconds instead of 2-3 minutes. Here's the first URL (http):
Since I'm not allowed to post a link yet:
The blog is from MSDN by Heath Stewart (MSFT) dated May 29, 2009 "how-to-workaround-the-issue-when-opening-office-applications-repairs-visual-studio"
2. The second URL (https) below is from a forum with similar issue that confirmed what I had to do. In this forum the helpee ran the suggested two commands and had the same warning:
Since I'm not allowed to post a link yet:
This next URL is from Anne Jing's thread dated Jan 6-9, 2015:
So, I decided to do as helpee did.
Here are the details of my challenge and the fix I ran following the first URL above:
Following is the actual warning I was getting when launching Office apps:
Log Name:      Application
Source:        MsiInstaller
Date:          1/23/15 12:12:30 PM
Event ID:      1001
Task Category: None
Level:         Warning
Keywords:      Classic
User:          Gerry-pavg6-HP\Gerry-pavg6
Computer:      Gerry-pavg6-HP
Description:
Detection of product '{9C593464-7F2F-37B3-89F8-7E894E3B09EA}', feature 'VB_for_VS_7_Pro_11320_x86_enu' failed during request for component '{9DE325B8-0C09-49EB-99AE-12284811D61C}'
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="MsiInstaller" />
    <EventID Qualifiers="0">1001</EventID>
    <Level>3</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2015-01-23T17:12:30.000000000Z" />
    <EventRecordID>51710</EventRecordID>
    <Channel>Application</Channel>
    <Computer>Gerry-pavg6-HP</Computer>
    <Security UserID="S-1-5-21-3985824742-3742285712-2182756392-1002" />
</System>
<EventData>
    <Data>{9C593464-7F2F-37B3-89F8-7E894E3B09EA}</Data>
    <Data>VB_for_VS_7_Pro_11320_x86_enu</Data>
    <Data>{9DE325B8-0C09-49EB-99AE-12284811D61C}</Data>
    <Data>(NULL)</Data>
    <Data>(NULL)</Data>
    <Data>(NULL)</Data>
    <Data>
    </Data>
</EventData>
</Event>
Fix:
I only run the 'REMOVE' command below for now because I didn't want to reinstall VS 2013 from the Internet, it needs >7GB to download) Jan23/15:
'REMOVE'
start /wait msiexec.exe /i {9C593464-7F2F-37B3-89F8-7E894E3B09EA} /L*vx "%TEMP%\1.remove.log" REMOVE=VB_for_VS_7_Pro_11320_x86_enu
'ADDLOCAL'
start /wait msiexec.exe /i {9C593464-7F2F-37B3-89F8-7E894E3B09EA} /L*vx "%TEMP%\2.addlocal.log" ADDLOCAL=VB_for_VS_7_Pro_11320_x86_enu TARGETDIR="%ProgramFiles%\Microsoft Visual Studio
10.0"
Note: Please ensure to open the first URL above and follow the steps when running the REMOVE and ADDLOCAL commands above.

Updated my iPhone 5 to ios7, in the App store after installing updates I now have a never ending list of the Apps I've updated. How do I get rid of the list after they've been updated? In the previous version I did not have an annoying permanent list.

Updated my iPhone 5 to ios7, in the App store after installing updates I now have a never ending list of the Apps I've updated. How do I get rid of the list after they've been updated? In the previous version I did not have an annoying permanent list.

iOS 7 allows you to have your apps update automatically. Therefore, the list of what has been updated stays so that you can see what was updated, when and what the release notes say. It has been suggested that they list has a limit, much like Recents. Currently, there is no way for the user to delete the entries manually. Just try not to look at them.

Macbook pro won't boot after installing update 10.9.3

macbook pro won't boot after installing update 10.9.3

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Save takes MUCH longer with images placed

When I have images placed in Illustrator, even just a few small ones, Save takes much longer..so long that it can be 20 seconds before I even see the progress bar, and after that the saving actually happens.
Is there a way around this, or are we stuck wtih mind-numbing save times when we have raster elements placed in Illustrator?
thank you!
CS6, OS X 10.8.4
w

when you 'place' images, they may, by default, be embedded...
unless you check the 'link' box

My mac air died, after i reinstall from dvd drive, when i boot up again, i saw a prohibit sign showing up on the screen, then get to my logon screen. After logon, it takes very long time to load any application. pls help

my mac air died, after i reinstall from dvd drive, when i boot up again, i saw a prohibit sign showing up on the screen, then get to my logon screen. After logon, it takes very long time to load any application. pls help

OK. If you believe that.
When the disk is starting to die it can be bad for a moment and then be good for a while. If there was no problem while you were checking it of course it shows up good.
I tell you those are the signs of a disk that is about to die.
Allan

After installing Yosemite iWork09 no longer works. Do I need to purchase an upgrade?

After installing Yosemite iWork09 no longer works. Do I need to purchase an upgrade?

All of the iWork 09 apps work for me with Yosemite. Try the following:
1 - delete all files with iWork in the file name from your User/Home/Library/Preferences folder.
2 - delete all files with iWork in the file name from your User/Home/Library/Preferences/ByHost folder.
3 - delete all items (files or folders) with iWork in the name from your User/Home/Library/Caches folder.
4 - reboot and try the iWork apps again.
NOTE: In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder. This will also work for Mavericks and Yosemite.
For Mavericks and Yosemite go to your Home folder and use the View ➙ Show View Options menu to bring up this window:

Fire fox won't open after installing update. But it shows in my task manager as running

Firefox won't open after installing update 3.6.6 Solution page says problem has been solved, but the solution has been removed.
== This happened ==
Every time Firefox opened
== After installing update 3.6.6 ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0)

Hello Chris.
Hopefully this support article is what you need:
https://support.mozilla.com/en-US/kb/Firefox+will+not+start

After having shut down after installing updates, when I restarted and tried to open a word file, it started opening ALL the word docs and the only way I could stop it was by"force quit" arted and tried to open

After having shut down after installing updates, when I restarted and tried to open a word doc, it started opening ALL the word docs and the only way I could stop it was by"force quit" . This is REALLY annoying!!

May be it is the Resume feature.
System Preference > General > Number of recent items
Uncheck the box next to "Restore windows when quitting and re-opening apps".
Best.

After installing update IOS I've lost my Quicken data, help?

I've lost my quicken data, after installing update....How do I retrieve?

gloria280 wrote:
I've lost my quicken data, after installing update....How do I retrieve?
What Mac do you have? What version of Quicken do you have?
Are you updating Quicken or OS X? What are the details of that update (prior version number and updated version number).
Also, since this is your first post to this forum, be sure to understand that the first reply is not necessarily the last word on the subject (nor even the first word, as in this case)!

ITunes crashes on iPhone after installing update 3.01

After installing update 3.01, iTunes won't work properly. iTunes starts up, plays a number but crashes after a while. My guess is, that this happens while the iPhone performs other tasks simultaneously (like retrieving e-mail and such). Are there other people with the same experience?

Update: looks to be a memory-problem (?). When I start iTunes and choose to play the firts album/number directly (without using coverflow), it works fine. For a while at least, until my mail is checked again: iTunes crashes again.

Imac keeps restarting on its own after installing update X?

Imac keeps restarting on its own after installing update X?

What do you mean "update X"? What update are you referring to?

Saving images takes much longer now?

About six weeks ago, saving images started to take much longer than they used to
. Elements 11.

I have been doing all kinds of editing - it doesn't seem to make much difference what or if I save as JPEG or TIFF. I am using Windows 7. I am saving to the original folder. I have saved and closwed these files from the Editor. The Organizer freezes and I just have to wait to do anything else?
Thanks

A problem is after install update december 10, 2014

A problem is after install update december 10, 2014 UAC settings says unknown publisher , troubleshooting not working, when I want to change any setting it says unknown publisher , windows defender not starting etc

Hi
vijay ,
Have you tried the solution provided by
Winword Exonar ? Does it work? Any feedback would be appreciate?
If this is not the cause, then I would suggest you return to a previous point with system restore. or simply uninstall the updates december 10, 2014 , then check if issue persists, we should first find out whether one update included in is the culprit.
Regards.
Yolanda Zhu
TechNet Community Support

After installing update takes much longer to go to sleep

Similar Messages

Maybe you are looking for