After installing v1.0.5.2304, can no longer connect device to pc

neither the device manager nor the desktop manager seem to recognize the playbook anymore.
z: does not show up in windows explorer - I'm not getting prompted for playbook pw on the pc
the desktop manager is showing me an option to reset the device and is prompting me to reload the Tablet OS.
this is not sounding promising. i'm afraid it might have already wiped my playbook as - while it is still connected to the pc - I can no longer turn the playbook back on. 
Any ideas folks?
Thanks.

Thanks for suggestion, TenNights.
So I backed out from that prompt to install tablet os, and then all of a sudden the playbook got connected. I was prompted for the pw on the pc, the z: drive showed up, and desktop mgr also was able to connect to the playbook.

Similar Messages

  • After installing OSX Mountain Lion I can no longer add attachments of any kind to my e-mails.

    After installing OSX Mountain Lion I can no longer add attachments of any kind to my e-mails.

    Wait for the developers to update their games to work with Lion.

  • After updating to iOS 6, I can no longer connect to my schools wireless network. It uses manual http proxy. Now however a blank pop up comes up and it will not connect you. Thanks

    After updating to iOS 6, I can no longer connect to my schools wireless network. It uses manual http proxy. Now however a blank pop up comes up and it will not connect you. Thanks

    Turn off your firewall and antivirus software.

  • After installing latest OS update I can no longer print from my iPad to my HP Officejet Pro 8600 printer.  Any suggestions?

    After installing latest OS 5.1 update I can no longer print to my HP Officejet Pro 8600 printer?   Suggestions?

    Installing the new os may have tricked one of the three devices involved.  If it used to work, it will again.
    Reboot the printer.   Reboot the router.  On the pad, general, reset, reset network connections. 
    Make sure all the devices are on the same wifi network.   Talk nice to it.

  • TS1702 After installing the latest itunes, I can no longer sync Apps to my ipod touch. I have restored it to original settings and now old apps won't install please help.

    My ipod touch will no longer sync apps since I downloaded the new Itunes. I have restored it to original setting in hopes that would work, but now I have lost all my apps and even old ones will no longer sync. Can anyone help?

    What model iPod do you have? If yo have a 2G iPod. many developers when they updated their apps to support iOS 5 and 6 dropped compatibility for iOS 4.2.1 and earlier.

  • After installing iOS 5.1 I can no longer call people with Siri without unlocking the phone

    Is this an intended change of behavior?  How can I get this functionality back?  I was using it all the time.  Now I have to dig my phone out of my pocket and unlock it to make a call even if I am using a handsfree headset. 

    That was the first thing I tried.  I then spent several minutes hunting through menus for any kind of new option.  I didn't find any, and the one you suggested was already on and doesn't seem to work.

  • After update to version 31, Firefox can no longer connect to the web.

    After Firefox updated to v31 and I restated Firefox no longer can reach any website, while Chrome and IE continue to work fine.
    Steps I have tried:
    - rebooted Windows
    - https://support.mozilla.org/en-US/kb/firefox-cant-load-websites-other-browsers-can?esab=a&as=aaq
    - https://support.mozilla.org/en-US/kb/fix-problems-connecting-websites-after-updating?esab=a&as=aaq
    - starting Firefox with "Add-ons Disabled" (Safe Mode)

    It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full, unrestricted, access to internet for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.org/kb/Server+not+found
    *https://support.mozilla.org/kb/Firewalls
    *https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating

  • After updating to 10.7.4 can no longer connect to a NAS using afp. Any ideas?

    Just upgraded to 10.7.4 from 10.6.8.
    We use a NAS to store and back-up work but am now unable to connect using afp.
    I can connect using SMB but this means I loose all the resource forks on my fonts etc.
    Any ideas?

    Hi Linc
    Thanks for that. Had absolutely no idea what most of that meant but it seems to have worked.
    Many thanks again.
    2Night

  • After 10.6 Upgrade - XP clients can no longer connect

    Just upgraded my server from 10.5 to 10.6.2 and now none of my XP clients can connect via SMB. Can't figure out the issue. They would normally connect via IP on a local network at "\\192.168.80.2", but now nothing happens on the XP side. Just does nothing at all. No login prompts or anything. Anyone know whats going on?
    Some stuff from the SMB logs if this helps.
    [2009/11/16 10:48:57, 0, pid=1155] /SourceCache/samba/samba-235/samba/source/auth/authodsam.c:opendirectory_smb_pwd_checkntlmv1(387)
    opendirectoryuser_auth_and_sessionkey gave -14091 [eDSAuthMethodNotSupported]
    [2009/11/16 10:48:57, 0, pid=1155] /SourceCache/samba/samba-235/samba/source/lib/opendirectory.c:getopendirectoryauthenticator(247)
    failed to read DomainAdmin credentials, err=67 fd=26 errno=2
    [2009/11/16 10:59:12, 1, pid=1155] /SourceCache/samba/samba-235/samba/source/smbd/service.c:close_cnum(1289)
    szymon (192.168.80.90) closed connection to service Ledger
    [2009/11/16 10:59:12, 1, pid=1155] /SourceCache/samba/samba-235/samba/source/smbd/service.c:close_cnum(1289)
    szymon (192.168.80.90) closed connection to service Accounting

    Two things to try:
    ...Ensure the appropriate NLTM authentication is enabled? Probably NLTMv1.
    Server Admin -> Open Directory -> Settings -> Policies -> Authentication
    ...Ensure that the Microsoft Windows XP clients have a compatible authentication requirement?
    This security settings authentication downgrade is set via an msc widget on the higher-budget Microsoft Windows XP variants, or directly via the LMCompatibilityLevel registry knob available within all Windows variants.
    With the upper-budget Windows versions, you can run the secpol.msc tool, navigate to Local Policies - Security Options, then to Network Security: LAN Manager authentication level, then (if the box is set this way) switch from "Send NTLMv2 response only" to "Send LM & NTLM - use NTLMv2 session security if negotiated".
    On all Windows XP versions including the lower-budget versions, you can use regedit to switch the HKEYLOCALMACHINE\ SYSTEM\ CurrentControlSet\ Control\Lsa registry key value LmCompatibilityLevel to 1

  • I've installed a Belkin router and can no longer connect my MacBook to the HP Photosmart printer.

    The MacBook connects to the web through the Belkin but not the printer HP Photosmart D110 [E17D6D]. In talking with the Belkin people they said I need to make sure the IP address is 192.168.2.1 but that's listed now as the Default Gateway. The present IP Address is 192.168.2.6. How do I update the primary IP Address on my printer?

    Lets try these steps first
    You have been thorough with your previous steps. I would also try:
    Print a network configuration page from the printer, see the link below for instructions.
    http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c02786894&tmp_task=useCategory&cc=us&dlc=en&lang​...
    Enter the IP Address into the address bar of an internet browser and press Enter, this should load a page about your printer.
    Click on the Network Tab.
    Click on IPv4 under the Wireless section.
    Click on Manual Configuration.
    Enter the same information as the Network Configuration page into IP Address, Subnet Mask, Default Gateway.
    Enter the Default Gateway value into the Preferred DNS Server field and enter 8.8.8.8 into the Alternate DNS Server field.
    I work for HP but my posts and replies are my own thoughts.
    If I have solved your issue, please feel free to provide kudos
    Make it easier for other people to find solutions, by marking my answer with Accept as Solution if it solves your issue.

  • 10.4.7 - can no longer connect to mail server (SSL)

    After installing 10.4.7 I can no longer connect to my mail server.
    My mail server uses SSL on port 993 - but when I look at the error message when mail tries to connect I get the following:
    "There may be a problem with the mail server or network. Check the settings for account <accountname> or try again.
    The server error encountered was: The connection to the server <servername> on port 0 timed out."
    Why is it trying to connect on port 0?

    Found the solution in MacFixIt - unchecking the SOCKS proxy fixes the problem.

  • After a day or two I can no longer conect to a known WiFi network

    After a day or two I can no longer connect to a known WiFi network without rebooting the router. The same thing happens with both routers I have (SMC and a Verizon) and when using a shared connection from my MacMini. This happens with each of FOUR iPhones I've owned and my iPod touch. So... yeah. I'm guessing this is either a software issue or some really odd signals are in the are in my area of New Jersey.
    Anyone else having similar issues?
    Message was edited by: aplardi

    have you deleted the account and re-added it?  Have you done a reset or restore as outlined in the iPhone user guide?  What troubleshooting have you done?

  • After I installed Lion, my MacBook Pro can no longer detect my external hard drives or my USB flash drives. What should I do?

    After I installed Lion, my MacBook Pro can no longer detect my external hard drives or my USB flash drives. What should I do?

    And me -- My Mac at work running Snow Leopard reads the drive normally. My home Mac (on Lion) can't even find it....
    Yet another Leo let-down.....

  • After installing a new hard drive can I install snow leopard directly from snow leopard disc

    After installing a new hard drive can I install snow leopard directly from snow leopard disc. Or do I have to install previous versions first. iMac 7.1 (2007) 2.8ghz

    You can install directly, assuming the disk is newer than your computer and not designed for a different Mac, but doing so won't install iLife.
    (64305)

  • After install Crystal Report Server 2011, can not access control tool

    After install Crystal Report Server 2011, can not access cntrol tool from web or from application. My server OS is Windows 2008 R2 SP1. I follow the fedault setting. How to fix it?
    Error message:

    Seems like webapps are corrupted, Just redeploy the webapps.
    refer the below thread to do the same.
    http://scn.sap.com/thread/3400477

Maybe you are looking for

  • [SOLUTION] Evolution doesn't print

    I ran into a problem with evolution. (Just started to use gnome since last weekend, until now it's mostly been kde for me.) What it did was to only allow me to "print preview", the other button was greyed out. I could not get it to make a printout on

  • Caller Display Charging Problem

    This is now the 3rd month in a row I have been charged for Caller Display, I have contacted the Indian online live chat twice previously but the problem still persists, can someone here get to the bottom of this and refund me the sums I have been ove

  • Third Party Plug-Ins have disappeared on upgrade from CS4 to CS5

    Hello Folks, I have recently upgraded from PS CS4 to CS5 and now, on looking through the Plug-Ins available fromthe Menu - Help - About Plug-In --, I see that my 3rd Party Plug-Ins (NOT the Plug-Ins which had previously been installed automatically b

  • Join Remote Computers to AD Domain

    Hi We have nearly 60 computers in 4 different cities in different retail outlets in each city. We use them as point of sale. We want them to be part of AD domain that is working in our head office. All these 60 computers have internet connectivity. S

  • Master Suite deactivate single component?

    I got all components installed from master suite on 1 pc. Now i want to deactive InDesign ONLY, from this pc and install InDesign on a other pc. How is this done, if possible? If i select Deactive from the help menu, it tells me it will deactivate al