After installing version 5 upgrade to my Iphone 4 all the apps stopped working.
After installing version 5 upgrade to my Iphone 4 all the apps stopped working and I cannot reinstall them at the Appstore giving me a message that I have already purchased them. I can see all the apps, click on them, but none of them will open. How can I make them work again, since the Appstore will not allow me to reinstall the apps? The only apps that are working are the ones pre-installed by the upgrade.
marco216 wrote:
After installing version 5 upgrade to my Iphone 4 all the apps stopped working and I cannot reinstall them at the Appstore giving me a message that I have already purchased them. I can see all the apps, click on them, but none of them will open. How can I make them work again, since the Appstore will not allow me to reinstall the apps? The only apps that are working are the ones pre-installed by the upgrade.
Try downloading any free app using the App Store on the phone.
Similar Messages
-
After installing 8.2 on my iPad (2nd gen) all the apps crash during use. It appears that the iPad saves a version of what I was using because after the app crashes I double press the home button an there is a screen of an older version of the page I was using. I swipe it away and start over, only to have the same thing happen again. I have reinstalled all the apps, rebooted, synced and re-synced with iTunes. This is VERY irritating!
That's one of the weird things.. it recognizes it maybe 10% of the time. And usually, only after I do the two-button reset. Problem is.. since it won't charge above 2%, anytime I try to do a restore or anything like that using iTunes, my device shuts off and I lose whatever progress I'd made.
So, an update... after reading through a bunch of similar complaints (there are literally 1000's of them so there's NO WAY this isn't somehow ios7 related, thanks a lot APPLE ) I decided to try a restore in recovery mode. After 3 hours and several disconnections... I ended up having to just set it up as a new iPad, as the restore did nothing. Weirdly though... as I was doing the restore in recovery mode.. I noticed I'd gotten up to a 10% charge.. higher than it's been since September, so after setting it up as a new device, I turned it off and plugged it in using the wall charger. 2 hours later and I was up to 38%. Still not great, as my iPad, before ios7 could've fully charged twice in the amount of time it took for me to now get 28% more of a charge. And that's with a fully cleaned out device.. so that really ***** and I'm now more confused than ever.
But I'm gonna leave it overnight charging and see what I come up with tomorrow. Sadly, when I paid $600 for it in February, I never expected to have to play "wait and see" with it... -
Hello
My system version 10.5.8
I have installed Safari update - 5.0.6 and the browser stopped working. At openingit shows the following icon:
"Safari has suddenly finished working. Possible problem is in the action of the plugin "TastyAppsAVPlugin".
After deleting all plugins from the folder "Internet Plugin", Safari worked again no problem, BUT all sites with flash content (e.g.YouTube) did not work.
I then tried the following experimental steps:
a) Moved all plugins from the folder "Internet Plugin" into a temporary folder.
b) Downloaded and istalled Adobe Flash Player version 10.3.181.34
c) Started Safari and it did not work ( same message"TastyAppsAVPlugin")
d) Deleted Adobe Flash Player from the folder "Internet Plugin". Safari worked.
e) Moved back all plugins, except Adobe Flash Player, from the temporary folder to "Internet Plugin" folder. Safari works... But Flash won't work!!! Before update to Safari 5.0.6 , ev erything worked perfectly well.
Guys, please solve the problem
Regards
Ruslan Reed
[email protected]MayaMa --
There are many threads on this. I typed "Uninstalling TastyApps" in the Google search, and came up with these:
http://www.google.com/search?client=safari&rls=en&q=Uninstalling+tastyapps&ie=UT F-8&oe=UTF-8
I do not know which of the many TastyApps haxies you have. Perhaps it would be better to contact them directly, once you know which of their products you have. -
If you're trying use your hotspot and connected to wifi on your iphone, does the wifi stop working and start using your data instead of staying connected to the wifi?
Spencer Simmonds wrote:
Thanks for the quick response. What you have said makes sense but there is no rhyme or reason to he data used. I reset my cellular data counter to zero so both sent and received read zero. I was connected to wifi and let the phone to go into sleep mode. I waited about ten minutes and sent myself the same email four times, each with a 750 kb attachment. It was sent to my .me address so it was push mail on my phone. Sure enough I checked a minute later while bringing the phone out of sleep mode and checked the data. It showed just 10kb sent but 1mb received which just doesn't tally with the 4 x 750kb mails received. It just isn't making sense.
He knows what you asked and has already answered it!
I thought I had read where the iOS4 (or maybe just the iPhone 4) was supposed to be able to keep wifi connections alive while inactive. If the phone is sitting there on a charger with a wifi connection available, why use the 3G? -
Is it possible to recover the app's and books that were on the version 5 before upgrade ??
If the iPad was synced with a computer then you will be able to restore them by syncing them across again.
If not then you will be allowed to download them all again from the App Store for free. -
After updating my itunes i have lost all the apps on my compter plz help
after updating my itunes on my computer i have lost all my apps can any one help getting them bk plz?
Have plugged back in and resynced. The apps should be there in your i tunes on the computer. Make sure the right sync buttons are checked.
-
Whenever i try and sync my iPhone, I get all the iPod Touch apps on it then have to maually delete them.
I have the same question, but can you clarify something please. I have about 10 apps showing in the apps section of iTunes - all of which I am happy to have on my iphone - but NOT on the Touch.
1. How do I 'delete' the apps wrongly synched to the Touch, and
2. For the future, when I download an app. hor do I ensure it is only synched with the iphone and not the Touch. I have very space left on the Touch and don't want to clutter it with unwanted apps.
regards from a newbe -
It really wasn't that much liquid but now I'm freaking out. I've always used clorox wipes and this has never happened to me. I'm going to leave it for a few days to dry just so I don't mess it up anymore. I'm debating putting it in rice. I just can't believe that small amount of liquid could ruin my macbook
I just can't believe that small amount of liquid could ruin my macbook
The traces (copper connections) on the logic boards are pretty close together. It wouldn't take much to short two critical points out.
I hope putting it away for a few days (maybe in the warm sun) works for you. Because that is all I would have suggested. -
After installing mavericks, my air unexpectedly restarts all the time?!
Updated to Mavericks yesterday and now my laptop force-restarts randomly every hour or so. Not cool! Apple, what is up?
My battery life is also draining quickly but I'm not sure if that's related to the shutdowns or the new OS.Hey, just a signal boost:
Same problem is happening. I've tried installing the update they provided (10.9.1) and nothing improved.
I've lost several college application essays and I'm sort of freaking out.
My pleas to Apple in the error reports have gone unanswered. I've been a faithful follower, Apple, please don't make me agree with my aggressively pro-PC friends!
Anybody?
Help? -
do all apps work properly even if its an older model?
Not neccessarily.
Any app that requires ios 4.3 or later will not work. -
Will I have to update all the apps if I update my iOS6 to iOS7.0.4 (iPhone 4)?
For a lot of app downloads iOS 7 is required.
There is ONE app right now that I DO NOT WANT TO BE UPDATED ever, because it will mess a lot of work that I have done.
Can I update safely to iOS 7, or when updating iOS all the apps must be updated too? (as it was some years ago if I remember correctly)
Thank youwjosten wrote:
Does not depend on the app.
What would happen if the app stops working after upgrading to iOS 7? There's no way to go back to iOS 6, and the OP wants a specific app version. It is very important to check that the version he/she is using works with iOS 7.
Also, as far as I know, iOS 7 updates all apps automatically, so Automatic Downloads should be disabled for Updates. If they are disabled, then there's nothing to do -
All third party apps stopped working (crash at launch)
Ok, so there's a BUNCH of people having the exact same problem as I do (search this forum or Google with the title of this post). And I'm posting this in iPad but it does happen on iPhone too. Summary :
Often after an iOS update (but not always) third party apps stop working. When started, they flash open and then just quit.
Apple built-in apps keep working fine.
NOTHING solves the problem : hard reboot (home+power until reboot), deinstall+reinstall one/all apps, restore the iPhone/iPad, buy a new (free) app from the store to "reset" software authorization, de/reauthorize computer, reset password from app store account, deinstall app and then reinstall using the iPad directly (not via iTunes), etc.
I have one iPhone 4 and one iPad with this issue.
Oddly enough, on the iPad, only apps that have recently been UPDATED crash. Apps that were present and left alone on the device keep working. On the iPhone, there was an iOS update so everthing was reinstalled and therefore doesn't work anymore.
Strangest thing : reset the device to make sure nithing is open in the background, launch an app, app crashes and returns to springboard, double click "home" and... tadaam, the crashed app is in the list of open apps. On the iPad, 4-finger slide does even go to that app's screen (which is pitch black).
As I said, 30 minutes of googling revealed at least 50 identical cases. All seem related to iOS 5.1. My iPhone rune iOS 5.1.1 (that was the upgrade) and my iPad runs iOS 5.1 and I'm NOT doing the update until I can solve this crazy thing.
Please, all, HELP !
Thanks in advance.Please, Alan, I know my message might be a bit long, but do read it! I DID try that and absolutely everything else that was mentionned in the other posts about this subject. Nothing works. And it doesn't work for the others either, not just me.
The only thing I can think of right now is to put the iDevice in DFU then make a clean install and configure it as a new iThingy. This looses all stored data and config so it's a pain in the a... and I won't try it unless I'm pretty sure nothing else can be done. And I'm not entirely sre it'll work, either… -
After iOS 5 upgrade my "artists" are all screwed up on my iPhone but are fine on my iTunes. ANY SOLUTIONS?? HELP!!
I had a similar problem to you that I have since solved.
At first only some albums/songs were missing artwork but they all showed up fine in itunes. I went into itunes and did the view where the album art is displayed next to the album in a list, middle option for viewing. I found that on several 1-2 songs did not have the artwork attached and so that was the cause of it not showing up on my iphone. However after I got all that solved I found that the artworks were all messed up. Much like you described many songs had the complete wrong artwork and some songs on the same album had different artworks or the same artwork showed up on multiple albums.
I could only come up with resyncing my iphone to solve it. I only use one playlist for my iphone so that I can sort of do manual management and only have to deal with one playlist. So I unchecked the playlist and did a sync to clear off all the audio. Then I rechecked the playlist and did a sync to reload everything and after that was done everything appeared correctly.
I didn't notice if this was affecting any of my purchased albums, I don't have that many so I didn't think about it but affected a lot of them. I hope this helps in some way and that you can get it working again. -
Hi,
Recently I got my Iphone unlocked. Earlier I was using it on ATT n/w. After unlock i am using it in India with a service provider here.
The problem that I am getting is, the phone was able to pick up the network and am able to make calls and messages. Data plan is still to be activated so cant confirm on that, but all the apps that were there on my phone got wiped out on its own. Since I wasnt sure as to what happend, so I reinstalled the apps today morning. I saw the apps getting installed and then left to get ready for my office. after nearly 30 mins I saw nothing was getting syncronized so disconnected the phone and left for Office. On reaching office when I checked for my usual Apps, I could see only the apple apps and none other available there. Need to know whats the issue and how to resolve it. Please can someone help me on this?I can not get to iPhone screen, so no way to get to Settings. That is the problem. When I connect phone to iTunes I get screen asking to insert SIN card. On the phone I'm getting Cinfigure screen asking Launguage , Country or Region, Wi-Fi, ( I can connect to my home wi-fi), and last screen "Activating your iPhone". After two minutes of waiting IM getting message: Your iPhone could not be activated because the activation server in temporary unavailable. try connecting to iTunes or try later or contat apple.com/support.
Like I mention, I went to Bell as well Rogers store and tried to insert active SIM card with no results.
Yes, my friend unlock the phone to use with Rogers but I don't know where -
After installing IOS 6 on my iphone 4, why is my camera taking purple pictures?
Immediately after installing IOS 6 on my iphone 4 on 9/22/12, when I attempt to use any of my phone apps, everything is colored in purple tint (see attached image). This includes taking video as well. If I flip the camera to the self facing camera, the purple goes away. This only happens on the front facing camera. I've tried googling this issue and cannot find anyone else complaining about this. Any ideas???
So, now I'm starting to feel like I'm the one and only lucky SOB to have this purple issue. For anyone who reads this, some more detail. Since posting this thread, I did a full reset from my iphone and that did not resolve the issue. Then, last night I did a full system restore from itunes which took about 4 hours and that didn't solve it either.
After all this, I started thinking that perhaps there's something wrong with the lens hardware but yesterday for approx 3 full seconds, the camera was normal then there was a stutter and it went purple again. Sounds like a software issue, so I'm really baffled why a system restore wouldn't cure this. Ugh!
Maybe you are looking for
-
Quick movements mess up my variables
I have an interactive map with multiple hotspots on it. When the user mouses over a hotspot (Button) a value is assigned to a variable (country). The actionscript (AS2) is also told to go to a frame performing a close sequence on the currently open
-
Function Module to find the Difference between two times.
Hi All, Wud you plz let me know the Function Module to find the Difference between two times. Input Time1( Hours:Minutes) Time2 ( Hours:Minutes) Need Output in Hours:Minutes only . ( No seconds Needed ) Ex : Input : 06:00 to 18:00 Output : 12:
-
GR Processing time and QI Time
Hi Experts, Need some clarification on GRPT and QI time in a manufacturing process. 1)Is it a good practice to include QI time in GRPT ? 2) If yes, then what are the settings required for the same ? 3) What will be the stock availability date ? Will
-
Writing on system clipboard from an applet.
Is it possible? I have tried to write on it but an exception is occoured: java.security.AccessControlException: access denied (java.awt.AWTPermission accessClipboard) The code that I have used is: import java.security.*; import java.awt.*; import jav
-
Hi Experts, I am newbie to BIP I had installed OBIEE 11.1.1.7 along with that I installed Bi publisher 11.1.1.7. I have configured Microsoft Active Directory in the weblogic server. All the users who are in the Active directory were able to login to