After installing visual studio, I get continuously disconnected from internet

Hi all.
I just installed Visal Studio 2013 Community on my new Acer R13 with W8 Pro. After installation, I get continuousy disconnected from internet. It seems to be something with the virtual adapter that VS creates in order to run WP emulators. Some times I have
to wait a minute or two and the connection comes back up, but sometimes I have o restart my system in order for it to work. Has any one run into this? Any suggestions?
The same thing happend o me on my old latop, a Samsung Chronos Serires 7. I used to think it was a problem with that compuer, but now it seems like a VS or Windows issue.
Thanks.
:. HUGONNE .: Please mark as answer if the post helps. Coding tips - http://hugonne.blogspot.com/

Hi Hugonne,
Based on your issue, to check this issue is related to the VS IDE or your Windows OS, I suggest you could try to install same version of VS on other machine check the issue.
(1) If you get same issue, I suggest you can try to repaid or re-install the VS2013 Community and then reset the VS setting check this issue.
(2) If you did not get same issue, I suggest you try to check your network connections on your windows. If the network connections did not have issue, maybe you will need to repair or re-install your OS check this issue again.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

Launching VB6 Editor after installing Visual Studio 2013 results in "Please wait while Windows configures Microsoft Visual Studio..."

I have had various versions of Visual Studio installed beside Visual Basic 6.0 Enterprise for some time with no problems, most recently Visual Studio 2012 Premium.
I recently installed Visual Studio 2013 Premium, and now every time I open VB6 I get a dialog that says "Please wait while Windows configures Microsoft Visual Studio Professional 2013" that shows a progress bar. After it finishes (30 seconds or
so), it launches again and again and finally VB6 will open. This happens with each instance of VB6, regardless if I've already done it once and never run VS2013 in between.
If I cancel the dialog, I get this error message in a dialog: "Error 1712. One or more of the files required to restore your computer to its previous state could not be found. Restoration will not be possible." Several more "Please wait"...
dialogs will appear and if I continue to cancel, eventually I'll get the VB6 editor. It appear to work fine despite the error messages.
It seems to me that the VS2013 installer flagged some dll's or other files to be rolled back whenever starting VB6. It doesn't appear to be necessary, and I'd like to avoid playing the "Please wait" wack-a-cancel-button game before launching each
instance of VB6 (or waiting several minutes for no reason). So how do I fix this?
Note: I've seen something similar happen in Outlook on a different PC when upgrading from 2010 to 2013. The same sort of "Please wait"... dialog would appear each time I opened Outlook. Judging by the "similar" questions that popped up when
entering this forum post, I'd say this is a general problem with upgrading older versions or installing newer versions of major Microsoft software side-by-side.
/* Don Reynolds */

I found the answer!
I was having the exact same issue, and I was search for a solution and I happened across the following thread: http://social.msdn.microsoft.com/Forums/en-US/f4b0fd38-f4f9-41ea-bd8d-834203a175d2/building-visual-studio-2010-project-triggers-please-wait-while-windows-configures-visual-studio?forum=vssetup&prof=required
Scroll a small bit down, and there is a post by Barry Wang explaining that you need to use event viewer to find out what is missing. Anyway, I opened event viewer, then open VS 6, then hit refresh in the event viewer (under Windows Logs -> Application)
and saw a warning message from MsiInstaller. It gave me the following message:
Detection of product '{9C593464-7F2F-37B3-89F8-7E894E3B09EA}', feature 'Visual_Studio_Professional_x86_enu', component '{E3FF99AA-78B9-4A06-8A74-869E9F65E1FE}' failed. The resource 'C:\WINDOWS\Microsoft.NET\Framework\URTInstallPath_GAC\' does
not exist.
I opened an elevated command prompt, I navigated to the C:\WINDOWS\Microsoft.NET\Framework folder and verified that 'URTInstallPath_GAC' didn't exist, and then I did "md URTInstallPath_GAC".
Closed and reopened VS 6, and it instantly opened - no "Please wait" message.
Now this may or may not be the same problem you are having (problem is - I have had it happen on two separate computers now with VS 6 and VS 2013 installed), but it should point you in the right direction. In fact, you should be able to use the Event Viewer
for anytime the "Please wait" message shows up for any application, and then once there find out what is really missing.

ShimNotImpletedException after installing Visual Studio 2013

The object of this post is to document what has been discovered.
Installed Visual Studio 2013 on machine that already has Visual Studio 2012 installed. We have a Visual Studio 2012 solution that has a unit test project. This project uses Fakes (Microsoft.QualityTools.Testing.Fakes). After the upgrade we see that there
is a new version for this assembly - it is now 12.0.0.0 instead of 11.0.0.0 seen in VS12.
The VS12 solution unit tests are throwing Microsoft.QualityTools.Testing.Fakes.Shims.ShimNotImplementedException.
According to
http://blogs.msdn.com/b/visualstudioalm/archive/2014/11/24/avoiding-visual-studio-fakes-build-break.aspx it gives two workarounds. These workarounds are not working for us. We do need to set "Specific Version" to True for the Fakes assembly to
successfully have our tests succeed.
The underlying issue is that the legacy tests did not define specific methods on the ShimXXX object that the code based is using. Under version 11 all is well; version 12 is a different matter. We have 58 tests that are failing because of
this. These tests are on a legacy code base that was not written to be testable.
What is interesting is that some developer machines that have VS13 installed are not experiencing these issues. Not sure how to isolate what the underlying differences between the machines are.

Hi Gerald Bauer,
Thank you for sharing the experiences here. It will help others who are encountering the same issue.
For what your discovered,
we recommend that you create connect report for it to get the issue researched and diagnose by product team.
Here:
http://connect.microsoft.com/VisualStudio/feedback/CreateFeedback.aspx.
Thanks,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Cannot open designer for aspx files after installing Visual Studio 2013

When I attempt to open the design tab for a aspx file I get a popup that reads: Cannot load "C:\PROGRA~2\MICROS~3.0\Common7\Packages|FPACUT~1.DLL". I'm running on Win 7 SP1. Version of Studio is 2013 Ultimate. I tried running
in SafeMode and tried using /Log but theirs nothing related to this error coming out. I very novice with VS, but I'm an experienced Java developer. I actually had a version of VW 2012 Pro that I was using for TFS for a java project. I've
tried a repair, I've tried an uninstall. I've uninstalled the old 2012 version of VS. Nothing seems to get around it. Be happy to supply additional info, but not sure where to look.

Hello ToddMorgan,
Can you create a new project and test the result?
If you can open any aspx file from other projects then please copy content from your current project to the new project.
If you still cannot open any aspx file, please upload your full logs. Please use
http://aka.ms/vscollect
to gather the installation logs. After using it, you will find vslogs.cab from %temp% folder. Please upload the file to
https://skydrive.live.com/
and share the link here.
I will check whether your installation is corrupt when install. By the way, you may also try refer to this page:
http://stackoverflow.com/questions/3937135/cannot-load-fpacutl10-dll-error-in-vs2010
And check whether the system variable is the cause of your issue.
Regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

After i install Visual-Studio 2013 crystal-report not working

hi
after i install Visual-Studio 2013 crystal-report not working on my Visual-Studio 2010 projects
when i try to open crystal-report i see this:

Hi E_gold,
Crystal Reports forum may be a better place for you.
Thanks for your understanding.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Cannot install Visual Studio Community Edition

Hi,
When trying to install Visual Studio Community Edition with Update 4 I receive a message during the initial phase: "Unable to locate package source"
When I choose "Download packages from the internet" I got the same message. When I continue with the option "Skip package" I got the message again.
What is the issue here?
Thanks!

The file seems to be corrupt. This time I got an error after 2% of the download saying that the download was interrupted. After clicking resume it just took seconds before the download seemed to has finished correctly. But probably not... Could the download
issue maybe has something to do with the fact I am in Thailand, or what could be the issue here?
By the way, when I try to download Visual Studio 2013 Express for Web using Web Platform Installer I receive this error:
WHY do I get this error. I don't have Visual Studio installed...
Thanks!

Problem installing Visual Studio 2012 Professional, "security ID may not be assigned as the owner of this object"

I'm trying to install Visual Studio 2012 Professional edition on my work laptop, Windows 7 Enterprise, Service Pack 1. I have limited admin rights and should be able to install
programs on this laptop but when I try to install VS 2012, I get the following error message:
"This security ID may not be assigned as the owner of this object."
Any idea why this is happening?

Hi,
You must have administrator credentials to install Visual Studio. However, you do not have to have these credentials to use Visual Studio after it is installed.
More information you can refer to:
http://msdn.microsoft.com/en-us/library/e2h7fzkw(v=vs.110).aspx
Please install the Visual Studio 2012 as the administrator.
Best regards,
Ego [MSFT]
MSDN Community Support | Feedback to us
Develop and promote your apps in Windows Store
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

Problem with installing Visual Studio on Windows 8

Hi
I am disappointed to buy windows 8 based machine. I installed visual studio 2013 on Windows 7 machine and it was compiling well
But i installed same on my windows 8 machine. But i am not able to compile simple program
Below is program
#include<stdio.h>
int main()
printf("Hello World");
return 0;
I am getting below error
Error 1
error MSB4018: The "CL" task failed unexpectedly.
System.TypeInitializationException: The type initializer for 'Microsoft.Build.Utilities.FileTracker' threw an exception. ---> System.NullReferenceException: Object reference not set to an instance of an object.
at Microsoft.Build.Utilities.FileTracker..cctor()
--- End of inner exception stack trace ---
at Microsoft.Build.CPPTasks.CL.ComputeOutOfDateSources()
at Microsoft.Build.CPPTasks.TrackedVCToolTask.SkipTaskExecution()
at Microsoft.Build.Utilities.ToolTask.Execute()
at Microsoft.Build.CPPTasks.TrackedVCToolTask.Execute()
at Microsoft.Build.BackEnd.TaskExecutionHost.Microsoft.Build.BackEnd.ITaskExecutionHost.Execute()
at Microsoft.Build.BackEnd.TaskBuilder.<ExecuteInstantiatedTask>d__20.MoveNext()
C:\Program Files (x86)\MSBuild\Microsoft.Cpp\v4.0\V120\Microsoft.CppCommon.targets
341 5
ConsoleApplication1
This is strange.
Please help here
thanks
regards
Sobin

Error 1 error MSB4018: The "CL" task failed unexpectedly.
System.TypeInitializationException: The type initializer for 'Microsoft.Build.Utilities.FileTracker' threw an exception. ---> System.NullReferenceException: Object reference not set to an instance of an object.
See if this thread helps:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/bbe9aa98-42de-4bf8-bce8-8b2ab4fd16ad/msbuild-error-msb4018-with-vs2012-update-1?forum=msbuild
When in doubt, put some of the key words from the error into your
favourite search engine.
Dave

Error while installing Visual Studio Express 2013 with Update 4 for Windows Desktop.

When I try to install Visual Studio Express 2013 with Update 4 for Windows Desktop, I
get the error :
Microsoft Visual Studio Express 2013 for Windows Desktop.The form specified for the subject is not one supported or known by the specified trust provider.
Here is what I get when I use the File Checksum Integrity Verifier (NOTE: I couldn't find the SHA Hash for the .iso I downloaded)
// File Checksum Integrity Verifier version 2.05.
8ab9b5ff10da1c33bb3f088331a7c8d8 vs2013.4_dskexp_enu.iso
Here is some Extra Information:
MY OS: Windows Technical Preview x86ANOTHER OS I TRIED INSTALLING VB ON: Windows 7 Ultimate x86
DOWNLOADED ISO FROM: http://www.visualstudio.com/en-us/downloadsLINK: http://download.microsoft.com/download/9/6/4/96442E58-C65C-4122-A956-CCA83EECCD03/vs2013.4_dskexp_ENU.iso
LOG FILE: http://m.uploadedit.com/b044/1421425243589.txtSHA HASH OF THE RECEIVED ISO: 8ab9b5ff10da1c33bb3f088331a7c8d8
====================================================NOTES:
#I ran the setup as an administrator.
#I do not know the SHA Hash for the ISO so please check if it matches the SHA Hash of the actual file.#Please don't recommend to use the Web Installer.#I tried both extracting the ISO and Mounting the ISO to run the Setup.
Thanks. :D

Solved. The ISO is corrupt.
The SHA 1 Hash of the ISO was 57CF28106EA096758AD6AB909F226A3468D95A49
and the downloaded one returned 8ab9b5ff10da1c33bb3f088331a7c8d8.

I can't install Visual Studio 2013 Ultimate in my Windows 8.1 Pro

Good Day Everyone!
I have downloaded an ISO file of VS2013 installer from Microsoft Download Center. I have checked the requirements and I have what it needs to be installed. But when I mount the ISO disc image, an error message appear.
G:\
Application not found.
I also tried to run it from the inside and another error shows.
Visual Studio 2013 Ultimate has stopped.
I have the ISO file checked and it matches the CRC and SHA1 posted from the download center. I also have .net frameworks 3.5 and 4.0 installed in my laptop.
I don't know what else to do. Please help. Thanks

Hi,
Base on your question, please follow these steps to check the result:
1.Update your windows and disable Anti-Virus software, then reboot your system.
2.Clear your %temp% folder.
3.Run the setup file as administrator.
4.If the installation fails, please use http://aka.ms/vscollect to gather the latest installation logs. After using it, you will find vslogs.cab from %temp% folder. Please upload the file to
https://skydrive.live.com/ and share the link here.
If it doesn't work,we suggest you burn the image to Disc ,and install
Visual Studio 2013 Ultimate by DVD.
Regards,
Kelvin hsu
TechNet Community Support

I am having trouble in installing Visual Studio 2010 Ultimate on Windows 7 SP1 x64

Hi
I am trying to Install VS2010 Ultimate on Windows 7 X64 SP1 Specifically SP1 because before it I am using Windows 7 x64 and VS2010 Ultimate working there excellently. When I try to install it says the Setup file is incompatible with your Windows version
I am surprised by this please reply me as soon as possible
Thanks in Advance
Arpit

Hi Arpit,
Welcome to the MSDN Forum.
As far as I know, Visual Studio 2010 is compatible with Windows 7 SP1. I think this issue might related with the Visual Studio install media. I recommand you download Visual Studio 2010 Ultimate from
this link, and follow the steps below to install it:
Before install Visual Studio, please finish the steps below first:
Turn off your anti-virus/antispyware software during installation;
Install the latest Windows updates from the Windows Update site:
http://update.microsoft.com;
Complete or dismiss Windows Update before installation. (And don't forget to turn it on later);
Clean your %temp% folder (Start Menu >> Run >> Type "%temp% >> OK);
Run the setup with Administrator privilege: right-click the installer -> Run as administrator
If the installation still failed, please collect the installation log files from "%temp%" folder with the
Log Collection Tool.
Send the vslogs.cab file in the %temp% folder to me for further analyze(E-mail: v-anwu_at_microsoft_dot_com). Note: Please attach the link of this post in the mail.
If you have any concerns, please feel free to let me know.
Best Regards,
Andrew Wu [MSFT]
MSDN Community Support | Feedback to us
Get or Request Code Sample from Microsoft
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

Cannot install Visual Studio 2013 on Windows 7 Ultimate x64

Hi,
I'm trying to install Visual Studio 2013 under Windows 7 Ultimate SP1 x64. If it matters the Windows O/S is an image running under Parallels.
I've had Visual Studio installed on this machine before (I can't remember the version) but have uninstalled it.
I'm getting an error "Microsoft .NET Framework required for Microsoft Visual Studio Express 2013 for Windows Desktop - ENU".
I've been Googling this issue for hours, trying numerous things suggested, to no avail. Apparently it's a common error.
I've got the .Net Framework 4.5.1 installed. I've also reinstalled it and repaired the installation. I suspect the error message is a stupid red herring.
I'm at my wits end on this. Any advice on how to get this bug ridden swill to install?
P.S.: Clearly this is a known and highly frustrating issue for many people. Why can't Microsoft find the bug, fix it, and put an updated installer on their download site. Is this too much to ask?

You need to go to the MSDN website for Visual Studio 2013 found @
http://msdn.microsoft.com/en-us/library/dd831853.aspx
The webpage with the system requirements has a Support tab for help with Visual Studio @
http://www.visualstudio.com/products/visual-studio-2013-compatibility-vs
You need help for the application, not for Windows 7.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Error While installing Visual Studio 2005 in windows server 2012R2

Hi Team
One Help
I am using windows server 2012R2.I want to install visual studio 2005.
i downloaded VS 2005 from :
http://www.microsoft.com/en-us/download/details.aspx?id=804
while installin i am getting this error :
"the upgrade patch cannot be installed by the windows installer service because the program to be upgraded or missing or upgrade patch may update a different version of the program.Verify that progam to be upgraded on exiting computer that you have
the correct upgrade patch"
PLease help us.
Thanks,
Bob

Hi Gopi,
Are you trying to add the hosts to your OEM 12c, and then choosing "Deploy Agent"?
Please check this error message about the image file..
The image file C:\oracle\core\12.1.0.2.0\jdk\bin\java.exe is valid, but is for a
machine type other than the current machine.
"Validating OMS_HOST & EM_UPLOAD_PORT failed."
If the agents are deployed earlier from another OEM12c server, please undeploy them and then try.
Thanks,
Rajiv.

After installing Sun Studio 11, libfsu.a in Sun Forte 6 is removed.

I have Sun compilers 5.0 and 6.2 on my Sun Solaris 8 Ultra Sparc machine. After installing Sun Studio 11, some library files (e.g., libfsu.a in Sun Forte 6) from the old compilers were removed. What is wrong with my installation?
Note that I install the different versions of compilers in separate directories.

After the 1st failed installation of Sun studio 11,
did you making sure that Sun studio 11 is not exist
on your system before re-install Sun studio 11? The
rule is you can have different Sun studio releases
on the same system, but you can not have the
multiple copy of the same release on the same
system, even though they are in a totally separate
directory. If Sun Studio 11 exist after 1st fail
installation, you need to un-install it first before
you re-start 2nd installation attemp.
Installation of Sun Studio 11 should not remove files
from older releases, but we know the case it did mess
up package of the older release before.
-NgocNo, after 1st install failed due to insufficient disk space, I did not uninstall Studio 11. After I deleted some user files to free up disk space, I run the install again, specified the same directory for installation, and just select Sun Performance Libraries. The installation seems to finished successfully. Perhaps this is one scenario where old versions can get messed up.

Installing Visual Studio 2012 update 4 on Windows 10 preview

Hi all,
I successfully installed visual studio 2012 on Windows 10 preview but when I try to install update 4 I get an error about compatibility:
I tried downloading the update with "VS2012.4 /Layout"
but I could not find any way to control the compatibility setting...
any advise?
Smadar

What's the name of the file you're using to install Visual Studio?
It seems there may be a bug in Windows 8.1 (and hence also Windows 10) where re-naming the EXE file fixes the problem. More information is available
here, however the applicable text is below:
"Thank you for taking the time to submit this issue to Connect. This is a known issue with Windows 8.1 RTM and it will be addressed in a future update of Windows 8.1. In the meantime,
you can typically rename the EXE to get it to work correctly.
Examples:
Visual Studio Professional 2012 installer should be renamed to vs_professional.exe
Premium -> vs_premium.exe
Ultimate -> vs_ultimate.exe
Please let me know if this resolves your issue."
Hope that helps!

After installing visual studio, I get continuously disconnected from internet

Similar Messages

Maybe you are looking for