After installing Windows 7 and changing my computer name , I installed again iTunes. Now I cann't syncronize my iPad and iPod anymore. Could you pease help me?

After installing Windoes 7 and changing the name of my computer, I can't syncronize my iPad and my iPod. No information given, in the bar on the left side I can't find my devices.
THankssssssssss

THIS PROBLEM HAPPENED TO ME .
IT HAS JUST ONE WAY TO SLOVE THIS PROBLEM :
YOU MUST RESTORE THEM .

Similar Messages

Help! This probably sounds dumb, but I got my Ipod touch fourth generation yesterday and they said I could sync the music from my computer to the Ipod. Could you guys help me do that? All the websites I have looked on don't help. Thanks!

Help! This probably sounds dumb, but I got my Ipod touch fourth generation yesterday and they said I could sync the music from my computer to the Ipod. Could you guys help me do that? All the websites I checked didn't help. Thanks!

You need to read the manual
Click Support at the top of this page, then click manuals
Open itunes, connect ipod, select what you want, sync

Just upgraded my ipad 2 software to iso7 and all my Video name titles have gone? I have 4 films on the ipad and I share about 200 films from my pc, now to watch a film I need to randomly select one to see which film it is before I play it.. This is bad!

Just upgraded my ipad 2 software to iso7 and all my Video name titles have gone? I have 4 films on the ipad and I share about 200 films from my pc, now to watch a film I need to randomly select one to see which film it is before I play it.. This can’t be right! Help!!

You cannot go back to an earlier version of iOS.
If you are having Wi-Fi problems I suggest going to some location that offered free Wi-Fi. Your library or a Starbucks perhaps. Does your iPad connect there and work well?
If your iPad works well there you can eliminate the iPad and it's iOS as the cause of your problem.
If your iPad still acts up when connecting to the other Wi-Fi sources I'd suggest a visit to an Apple store to help discover the problem. Be sure to make an appointment prior to going to the Apple store.

TS1363 I started my Ipad and it asked me to plug it to connect to itunes, now it wants to reset the ipad and loose what's on it. What can I do without losing everything?

Can anyone help me on this?

If you've just updated the iPad and its no longer recognised on your computer's iTunes then see if this page helps : http://support.apple.com/kb/ht4097

I bought a new laptop with Windows 7. My computer name in Windows has changed, and now, my Ipad can't find Itunes

I bought a new laptop with Windows 7. My computer name in Windows has changed, and now, my Ipad can't find Itunes, and Itunes can't find my Ipad. [email protected]

Ok, if reinstalling iTunes as suggested above does not resolve the issue of iTunes recognising the iPad then try this -
Firstly, make sure that your device is not hidden (left hand pane). If it just reads device then toggle between SHOW and HIDE.
Secondly, try all the other ports on your computer, even a number of times.
Thirdly, make sure your lead /connections are no faulty.
Fourthly, if you have another computer try plugging your device into it without taking any action, give it a moment, remove it and try it back in your other computer again.
Failing all that, see here - http://support.apple.com/kb/TS1538
And failing all that put the device into Recovery mode. See here and note the paragraph 'If you restore from a different computer.... ' down near the bottom of the page -
http://www.apple.com/support/ipad/assistant/itunes/
As for making your new laptop your 'home computer' follow these instructions -
1. Without connecting your iPad to your computer -
A) Install iTunes / make sure the latest version of iTunes is installed.
B) Go to the Store tab and click on "Authorise This Computer".
C) Go to Edit, click on Preferences [iTunes and Preferences on Macs] and click on Devices. Put a check mark in the box next to "Prevent iPods/iPhones/iPads from syncing automatically". Click OK and close iTunes.
2. Connect your iPad to your computer -
A) Start iTunes (it will not start automatically because of the action at 1(C) above).
B) Right click on your iPad under Devices in the left column. Select "Transfer purchases".
C) When the transfer has completed, right click on your iPad again and select "Backup".
D) When the backup has completed, left click on your iPad, click on the Apps tab, and put a check mark in the box next to "Sync Apps", and then click on "Apply" (bottom right).
E) Unless you want to always do a manual sync (as I do), go back to Edit, Preferences [iTunes and Preferences on Macs] and uncheck the box next to "Prevent your iPod.....".
F) Finally, on your iPad, check that everything is syncing properly. If not, go back to iTunes and check all settings.
NB You should not lose any apps. However, any 'purchased' missing apps can be downloaded again FOC. As with updates, this must be done with the Apple ID under which they were originally 'purchased'.
Also see here as to moving your music to your new computer -
http://support.apple.com/kb/HT4527

Hello, I have Windows 7, and I have now to install Windows 8 on my Computer, and since, I cannot make any more of update of Apple of itune in Windows 8. Nor to download the software recent of itune... That have to I make???

Hello, I have Windows 7, and I have now to install Windows 8 on my Computer, and since, I cannot make any more of update of Apple of itune in Windows 8. Nor to download the software recent of itune... That have to I make???

Hello,
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information. <br>
'''Note''': ''This will cause you to lose any Extensions and some Preferences.''
*Open websites will not be saved in Firefox versions lower than 25.
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you.

Can I change the COMPUTER NAME of Windows Server ?

Hi all,
Is it possible to change the Computer Name of the Windows Server 2008, if Yes, what's the effect on all terminal profile on each station?
** We have many station that accessing some files thru pipe name ex: \\MyServer\Data\ hard coded on program public folders on server, but the newly installed server was named "MyServer2" can just rename it back to "MyServer" without problems
on client station? " ***
Thanks ^_^y

Yes. You can change the name.
You need to update all reference to new server name. You can try creating an Alias in DNS as a co-existence option.
Santhosh Sivarajan | Houston, TX
Windows 2012 Book - Migrating from 2008 to Windows Server 2012
http://www.sivarajan.com/
This post is provided ASIS with no warran

I changed the Computer Name and i can not run EM.

I had to change the computer name in order to connect to the intranet.
I updated the listener.ora and tnsnames.ora with the new computer name.
I can run SqlPlus but i can not run EM on http://tahirpc.isu.intranet:1158/em *
I checked Services and I saw that OracleDBConsoleorcl service do not work. I get error code:2 when i try to run it manually.
What should i do?
New computer name: tahirpc.isu.intranet
Old computer name: mtkeskin.isu.intranet
OS: Win 7
Oracle: 10.2.3
------------------------

Thank you Jean-Valentin . I tried those but unfortunately this did not work.
Here is what i did on CMD:
RECREATE
C:\Users\mtkeskin>EMCA -CONFIG DBCONTROL DB -REPOS RECREATE
STARTED EMCA at 28.Oca.2010 11:28:43
EM Configuration Assistant, Version 10.2.0.1.0 Production
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Enter the following information:
Database SID: ORCL
Listener port number: 1521
Password for SYS user:
Password for DBSNMP user: l
Password for SYSMAN user:
Password for SYSMAN user: Email address for notifications (optional):
Outgoing Mail (SMTP) server for notifications (optional):
You have specified the following settings
Database ORACLE_HOME ................ D:\oracle\product\10.2.0\db_1
Database hostname ................ tahirpc.isu.intranet
Listener port number ................ 1521
Database SID ................ ORCL
Email address for notifications ...............
Outgoing Mail (SMTP) server for notifications ...............
Do you wish to continue? [yes(Y)/no(N)]: Y
28.Oca.2010 11:29:07 oracle.sysman.emcp.EMConfig perform
INFO: This operation is being logged at D:\oracle\product\10.2.0\db_1\cfgtoollog
s\emca\orcl\emca_2010-01-28_11-28-42-AM.log.
28.Oca.2010 11:29:24 oracle.sysman.emcp.EMReposConfig dropRepository
INFO: Dropping the EM repository (this may take a while) ...
28.Oca.2010 11:32:09 oracle.sysman.emcp.EMReposConfig invoke
INFO: Repository successfully dropped
28.Oca.2010 11:32:10 oracle.sysman.emcp.EMReposConfig createRepository
INFO: Creating the EM repository (this may take a while) ...
28.Oca.2010 11:37:14 oracle.sysman.emcp.EMReposConfig invoke
INFO: Repository successfully created
28.Oca.2010 11:37:34 oracle.sysman.emcp.util.PlatformInterface executeCommand
WARNING: Error executing CMD /C D:\oracle\product\10.2.0\db_1\bin\emctl.bat depl
oy dbconsole D:\oracle\product\10.2.0\db_1\tahirpc.isu.intranet_ORCL tahirpc.isu
.intranet:3938 tahirpc.isu.intranet ORCL
28.Oca.2010 11:37:34 oracle.sysman.emcp.EMConfig perform
SEVERE: Error instantiating EM configuration files
Refer to the log file at D:\oracle\product\10.2.0\db_1\cfgtoollogs\emca\orcl\emc
a_2010-01-28_11-28-42-AM.log for more details.
Could not complete the configuration. Refer to the log file at D:\oracle\product
\10.2.0\db_1\cfgtoollogs\emca\orcl\emca_2010-01-28_11-28-42-AM.log for more deta
ils.
DROP
C:\Users\mtkeskin>EMCA -DECONFIG DBCONTROL DB -REPOS DROP
STARTED EMCA at 28.Oca.2010 11:47:57
EM Configuration Assistant, Version 10.2.0.1.0 Production
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Enter the following information:
Database SID: ORCL
Listener port number: 1521
Password for SYS user:
Password for SYSMAN user:
Password for SYSMAN user:
Do you wish to continue? [yes(Y)/no(N)]: Y
28.Oca.2010 11:48:13 oracle.sysman.emcp.EMConfig perform
INFO: This operation is being logged at D:\oracle\product\10.2.0\db_1\cfgtoollog
s\emca\orcl\emca_2010-01-28_11-47-56-AM.log.
28.Oca.2010 11:48:17 oracle.sysman.emcp.util.DBControlUtil stopOMS
INFO: Stopping Database Control (this may take a while) ...
28.Oca.2010 11:48:18 oracle.sysman.emcp.EMReposConfig dropRepository
INFO: Dropping the EM repository (this may take a while) ...
28.Oca.2010 11:50:35 oracle.sysman.emcp.EMReposConfig invoke
INFO: Repository successfully dropped
Enterprise Manager configuration completed successfully
FINISHED EMCA at 28.Oca.2010 11:50:35
CREATE
C:\Users\mtkeskin>EMCA -CONFIG DBCONTROL DB -REPOS CREATE
STARTED EMCA at 28.Oca.2010 11:54:55
EM Configuration Assistant, Version 10.2.0.1.0 Production
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Enter the following information:
Database SID: ORCL
Listener port number: 1521
Password for SYS user:
Password for DBSNMP user:
Password for SYSMAN user:
Email address for notifications (optional):
Outgoing Mail (SMTP) server for notifications (optional):
You have specified the following settings
Database ORACLE_HOME ................ D:\oracle\product\10.2.0\db_1
Database hostname ................ tahirpc.isu.intranet
Listener port number ................ 1521
Database SID ................ ORCL
Email address for notifications ...............
Outgoing Mail (SMTP) server for notifications ...............
Do you wish to continue? [yes(Y)/no(N)]: Y
28.Oca.2010 11:55:19 oracle.sysman.emcp.EMConfig perform
INFO: This operation is being logged at D:\oracle\product\10.2.0\db_1\cfgtoollog
s\emca\orcl\emca_2010-01-28_11-54-55-AM.log.
28.Oca.2010 11:55:32 oracle.sysman.emcp.EMReposConfig createRepository
INFO: Creating the EM repository (this may take a while) ...
28.Oca.2010 12:00:13 oracle.sysman.emcp.EMReposConfig invoke
INFO: Repository successfully created
28.Oca.2010 12:00:27 oracle.sysman.emcp.util.PlatformInterface executeCommand
WARNING: Error executing CMD /C D:\oracle\product\10.2.0\db_1\bin\emctl.bat depl
oy dbconsole D:\oracle\product\10.2.0\db_1\tahirpc.isu.intranet_ORCL tahirpc.isu
.intranet:3938 tahirpc.isu.intranet ORCL
28.Oca.2010 12:00:27 oracle.sysman.emcp.EMConfig perform
SEVERE: Error instantiating EM configuration files
Refer to the log file at D:\oracle\product\10.2.0\db_1\cfgtoollogs\emca\orcl\emc
a_2010-01-28_11-54-55-AM.log for more details.
Could not complete the configuration. Refer to the log file at D:\oracle\product
\10.2.0\db_1\cfgtoollogs\emca\orcl\emca_2010-01-28_11-54-55-AM.log for more deta
ils.
I checked log files but i did not understand anything of 'em :(
Edited by: NaKKaSh.TR on 28.Oca.2010 12:12
Edited by: NaKKaSh.TR on 28.Oca.2010 12:14

What modifications to be done after changing the Computer name..?

Hi all...
What are the modifications to be done after changing the Computer name..(Hostname) to connect the oracle. When i am restarting the TNS Listener manually, it is giving Error 1067.
Please tell me, what are the modifications to be done, if i change the computer name.
Thanks in advance,
Pal

You need to change your hostname/ip in listener.ora

After attempt to install windows 7 via boot camp onto Mac mini, my screen reads "no bootable devise--insert boot devise and press any key. However, disk still in reader, and not using a Mac keyboard

After attempt to install windows 7 via boot camp onto Mac mini, my screen reads "no bootable devise--insert boot devise and press any key. However, disk still in reader, and not using a Mac keyboard

Reboot your Mac, as soon as you hear the chime press the option/alt key and hold it until the boot manager appears, select OSX to boot from.

Changing my computer name after registration

Guys, I do need help please.
I got my macbook Air & I made the registration on imac.
Now I need to change my computer name & I can not do it!
Can anyone help me please.
Thx

Thank you it helps now I can see from my other devices my computer name as I wished.
But when I open finder & I go to places still the old name exists. I tried to change it but a message shows telling that this name can not be changed cause it is required by Mac os.
Can U please help me to change this name 2.
Thanks again

How to change the computer name

I need to change the computer name but after this I cannot access to the historical data (printing alarms).
I have already changed the settings in Options->System and restarted the system.
With MAX 3.0 I can see that all the alarm records are stored with the old computer name \\computer name\process\....
How can I do to read the old alarms with the new computer name?
Thank you
Michael

Hi,
When you change the computer name in Options>>System, you are not changing the name of the computer. Rather, you are telling Lookout to log to either a remote or local system. Here are the specifics:
1. Computer Name: Name you want the traces to appear with (\\computer_name\process\...)
2. Default Computer: Computer you want to log to. If the name listed here is different than your computer's name (as seen by Windows), then it will attempt to log directly to that remote machine.
3. Default Path: Directory on either your local or remote machine that you want to log to.
To change the name of your local computer, you will need to do that in Windows. If you have WinXP, you can do this by right-clicking on My Computer and selecting Computer Name.
Go
od Luck
Mike

Changing the computer name in SAP R/3

Computer Name of the SAP R/3 server has been changed after the full installation of Oracle 9i and SAP R/3.
How to change the computer name after the SAP R/3 can start-up sucessfully?

Hi
it is not possible after installing R/3, you cannot change the host name , as per my understanding because when you install it generates a solution manager key based on host name SID and instance number.
Regards
Subhash

Change NETBIOS (Computer Name) of a computer under a domain controller by SCCM 2012 colsole

Is it possible to change NETBIOS (Computer Name) of a computer under a domain controller via SCCM 2012 Console?
example:
Domain Name: viyella.com
current Computer (FQDN host) name: vtgit-shohal.viyella.com
New Computer (FQDN host) name: vtgit-moin.viyella.com
if so, I will organized all computer of my organization and managed.
please help.
Thanks,
Shohal Bhuiyan
Shohal Bhuiyan

Hi,
Netdom is
a command-line tool that is built into Windows Server 2008 and Windows Server 2008 R2. It is available if you have the Active Directory Domain Services (AD DS) server role installed. It is also available if you install the Active Directory
Domain Services Tools that are part of the Remote Server Administration Tools (RSAT).
Netdom renamecomputer
http://technet.microsoft.com/en-us/library/cc788029.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

I have a MacBook Pro, how to change the computer name in the "Find Iphone"

I have a MacBook Pro, how to change the computer name in the "Find Iphone"?

Thank you for help! I was inattentive reading your answer. The thing which confused me was that I noted in blue. I had to just write in a red box and close the configuration window.

After installing Windows 7 and changing my computer name , I installed again iTunes. Now I cann't syncronize my iPad and iPod anymore. Could you pease help me?

Similar Messages

Maybe you are looking for