After installing Windows 8 both Photoshop CS5 and 6 cannot print
Following message appears when you try and print
The PS forum is your friend. And provide at least some info on what printer you are using...
Mylenium
Similar Messages
-
After installing windows 7 on my macbook pro, i cannot access my mac
After installing windows 7 on my macbook pro late 2011, when I try to access the mac side of the computer it just stays in "thinking" mode and will not open up the mac. Windows side opens and works ok.
I only know enough to try to uninstall windows 7 then hopefully open the mac and possibly reinstall the windows 7.
PROBLEM: I only know how to uninstall windows 7 from the mac side (in the bootcamp) BUT cannot access it??
Any help. Thank you
<Edited By Host>Hi craig1045,
It is possible that the file system for the volume containing the Mac operating system, or the OS itself has become damaged. I suggest that you follow the steps in this article to try to repair them -
A flashing question mark or globe appears when you start your Mac
http://support.apple.com/kb/TS1440
Specifically -
If your installation of OS X needs repair
If you don't see your startup disk displayed in Startup Manager, or if you see a prohibitory symbol (⊘) appear, your startup drive may need directory repair, or OS X may need to be reinstalled.
If you only see a disk named "Recovery HD" in Startup Manager, select it instead. You can also start from OS X Recovery by holding down Command and R on the keyboard at startup.
From the Utilities menu, choose Disk Utility.
In the Disk Utility window that appears, select your startup disk (usually named "Macintosh HD") from the left side of the Disk Utility window.
Click the First Aid tab.
Click Repair Disk to verify and repair any issues with your OS X startup disk.
After repairing the disk, try to start up normally.
If none of these steps resolve the issue, start from OS X Recovery and reinstall OS X.
Thanks for using Apple Support Communities.
Best,
Brett L -
Installed windows 7 with Boot camp and now cannot get back to OS x x
Have installed Windows 7 with Boot Camp on a 20" 2006 iMac running X 6.8. Now cannot get back to original OS. Tried Snow Leopard in drive and holding c and various other keys at start up but still Windows. Any ideas?
Boot Using OPTION key:
1. Restart the computer.
2. Immediately after the chime press and hold down the
"OPTION" key.
3. Release the key when the boot manager appears.
4. Select the disk icon for OS X.
5. Click on the arrow button below the icon. -
Neither app is working.
Due to the current unavailability of clairvoyants and mind-readers in the forum, we respectfully request you supply sensible, complete details:
A lot more information about your hardware and software is needed.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CC", but something like CC2014.v.2.2) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
a screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks! -
After installing Yosemite email messages duplicate themselves and I cannot erase them
Email messages duplicate themselves in my inbox and in trash. When I move a message to trash it reappears in the inbox.
You could simply delete the Gmail Account and re-add it. Try that. The only reason you wouldn't want to do that is if there are emails you have downloaded to your computer that you've deleted off Gmail's server that you want to keep. If all the emails you want to keep are already on Gmail, then deleting and re-adding the account shouldn't be aproblem
-
Since installing Lion OS, iCal does not work. I cannot add an event, print calendar, etc. How do i reinstall?
You can use Lion Recovery
Before you do that, go to ~/Library/Preferences
Move the com.apple.iCal.plist file from the Preferences folder to the Trash.
Restart your Mac.
See if you can print or add an event now. -
HP6520 Scanner and Copier Broke after installing windows 8.1
After installing windows 8.1, my copier and scanner stopped working. I have an HPPhotosmart 6520. There is no "Microsoft Fix it" for Windows 8.1. Could you help me with this problem? Thank you.
Hi,
Give it a try. All the best.
Regards,
Asim -
@I run a Windows 8.1 - Photoshop CS5 under Parallels on an iMac one year old and both having the latest OS. I use a NIK plugin "VIVEZA" which run fine for years without a problem. Latelt and without a reason, the NIK plugin has gone corrupt, (can not use it more the 2 corrections after a get a black background message that there is not enough memory) and the system stops running and a must restart is required. How do I fix this terrible problem?
If it requires a Photoshop CS5 re-install, (I belief that it may fix the problem) and re-install the two third party plugins (NIK Viveza) and (Onone Perfect Resize) how and where do I get to the proper Adobe upload page to do that.
I have tried to fix this problem by changing the memory allocations, I have spend many hours on it and are very disgusted with it but it needs to be fixed. The current memory settings are;
Ram available = 1588 MB
Range = 873 -1143 MB
Recommended Photoshop usage range = 857 however I have tried every setting to max and in between. Nothing works. Current setting = 1588 (max)
The Photoshop I use is registered, I have product # and order # .Contact NIK for updated/upgraded versions of their plug-ins. They have been having a lot of issues with their plug-ins.
-
I have a new HP PC 500-267c/ Windows 7/64 bit c omputer. I installed Creative Suites CS5 and I cannot scan into Photoshop.
It says I need the Plug In Twain to scan into Photoshop and can download it but nothing else. How and where
do I find the download?http://helpx.adobe.com/photoshop/kb/twain-plug-photoshop-cs4-cs5.html#main_Photoshop_CS5_a nd_TWAIN
There's no 64 bit TWAIN so you need to use the 32-bit version of Photoshop. Personally I'd recommend that you use the scanner software as a standalone application and forget TWAIN, which is rapidly becoming obsolete and more or less abandoned everywhere. All it does is call up the very same scanner software, only from within the PS UI, and tying up Photoshop in the process. -
Can i install Illustrator CC with Photoshop CS6 and Indesign CS5.5 or can i have some problems of compability? I use Windows 7. Thank u...
Generally this should work, but of course there may be occasional compatibility issues across the different programs and their different versions.
Mylenium -
How Can you reinstall Photoshop Elements12 to a computer that its was there but loss it after installing windows 8.1
Reinstalling Mavericks depends on several factors:
if you erased your recovery partition
what OS originally came on your Mac.
I'll assume you don't have a backup available that you made before your mishap, because you didn't mention it.
That's really the take home message here: have a backup!
If you still have your recovery partition:
boot into the recovery partition (command R at restart)
use the recovery partition to reinstall Mavericks. see: OS X: About OS X Recovery
if you do not still have your recovery partition, then it depends on whether your Mac originally came with installer disks or not.
If it originally came with installer disks, you would boot from the installer disks, erase your HD, and then reinstall the OS that is on the installer disks, and then upgrade as necessary until you get to Mavericks.
If your mac did not originally come with installer disks, but you managed to erase your recovery partition, then you can try to boot into internet recovery (option-command-R at restart), and use internet recovery to erase your HD and reinstall the OS that originally came with your computer, and then upgrade to Mavericks if you need to. See: Hands on with Mountain Lion's OS X Recovery and Internet Recovery | Macworld
(the reference refers to ML but it applies just as well to Mavericks). -
I have Photoshop CS5, and use windows XP. I cannot open bridge from photoshop, which I have done for years. When I am in Photoshop, when it opens, I always click on the bridge icon at the bottom of the screen and it puts me into bridge. This is not happening, the small wheel at the bottom of the screen just keeps spinning. Its like its stuck or caught in a loop. I can't get into bridge. I tried shutting down and starting up again but the problem remains. Looking for help. Dan
Thanks for your response, I was able to open bridge from File-Browse in Bridge. This worked, but was not able to go back to the way I always opened Bridge. At least I could get to Bridge and go into Camera Raw. I never tried to open Bridge from the Start menu. The odd thing about this is, it has happened before, and to get it "unstuck" and working again, I would shut down and restart again in a few minutes, and things would go back to normal. This time it did not go back to normal after several attempts. I shut down for about 3-4 hours, restarted, and it seems to be back to normal again. I am not sure if it's a problem that is getting worse each time it happens. And yes I am using Mini Bridge in photoshop CS5. Thank you for your help. Dan
-
After installing Windows 8, I am unable to download the creative cloud and the program I purchased for school.
I purchased photoshop for my computer. I updated my computer's operating system. I logged into adobe. I am unable to download the program again unless I pay again or use the trial.
-
Why Do Both Photoshop CS5 (64 Bit) and Premiere Pro (64 Bit) Crash on Start up.
Both Photoshop CS5 (64 Bit) and Premiere Pro (64 Bit) Crash on Start up. 32 bit version of Photoshop works fine.
Here is the problem signature when they crash.
Problem signature:
Problem Event Name: APPCRASH
Application Name: Photoshop.exe
Application Version: 12.0.0.0
Application Timestamp: 4bbc5b10
Fault Module Name: CoolType.dll
Fault Module Version: 5.7.82.7602
Fault Module Timestamp: 4b980c97
Exception Code: c0000005
Exception Offset: 0000000000073a92
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033
Additional Information 1: 7c82
Additional Information 2: 7c821a1fc13b00b508d1bb6ee7ecaf44
Additional Information 3: 019c
Additional Information 4: 019cb6db15489631b8a43faf27e30830
Problem signature:
Problem Event Name: APPCRASH
Application Name: Adobe Premiere Pro.exe
Application Version: 5.0.3.0
Application Timestamp: 4ce382d1
Fault Module Name: CoolType.dll
Fault Module Version: 5.7.82.7449
Fault Module Timestamp: 4b7b1af3
Exception Code: c0000005
Exception Offset: 00000000000739ea
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033
Additional Information 1: 889a
Additional Information 2: 889afed61eb6ddf1c1c3419adc6026b6
Additional Information 3: 8235
Additional Information 4: 823549a371dff618695395cc0a8514ee
Both are referencing cooltype.dll. I ran Font Doctor on all system and non-system fonts and found no errors. Booted without Extensis Suitcase loading. Nothing works. All 32 bit programs work fine. Any clues would be appreciated.It does not necessarily mean a "corrupt" font, but can be a font that PrPro, and PS, cannot handle.
Though I have read that changes have been made, Open Office's DejaVu font would crash PrPro's Titler - every time. There are quite a few others. Font Dr, and similar utilities, will not see the font(s) as corrupt, but they are so poorly designed, that PrPro and PS cannot deal with them.
Though it can be a long, drawn out process, one can often zero in on the problem font(s), with a little work. This is accomplished by first defining the "System Fonts," and not touching them. Then, uninstall half of the remaining fonts, and testing PrPro and PS. If they launch fine, you know that somewhere in that list of fonts, the problem exists. If there is still a failure to launch, chances are good that the problem font(s) reside in that half, that are still installed. Note: because the problem still exists, does not guarantee that there are NOT problem fonts in that uninstalled group, so keep that in mind.
Repeat the proces, by uninstalling half of the remaining fonts and testing.
If necessary, repeat by removing half of the now remaining fonts and testing.
When you get to a point, where you are no longer getting problems, reinstall fonts, in small groups, testing in between. The smaller the groups, the easier it will be to pinpoint the problem font(s).
Keep notes on which fonts you are uninstalling and reinstalling, until you narrow it down to the problem font(s).
I would start by uninstalling any "free fonts," and then commercial, 3rd party fonts. A lot of free fonts are just poorly designed, and can cause issues, though they might work fine in some other programs.
I use a font manager, so that I only have ~ 350 fonts installed at one time, and then dynamically install fonts, as needed for Projects. That keeps my machine clean, and if, upon installation, I get a crash/hang, I know that at least one font in that Set is causing it. This helps, as my workstation has ~ 19,000 fonts on it, and some are free fonts, and many are from 3rd parties. Some are also very, very old.
Good luck,
Hunt
PS - one common cause for hangs on loading PrPro can be from VST's, used in Audio-editing. If you also have a lot of VST's, you could have two issues with two separate programs, i..e. PS hanging on fonts, and PrPro hanging on VST's. The results would be the same, but the causes could be different. That leads to even more work. For PrPro, also see this ARTICLE. If you get PS launching, but PrPro is still not functioning, drop by the PrPro Forum, and someone can help you there. -
I own both Photoshop Elements and Photoshop (the original editor). I find the elements editor to be too cumbersome to use and would just like to edit using Photoshop. When I try to install Photoshop as a secondary editor in elements I get an error message that I don't need to this because it is already supported on the edit menu and task bar. I can not find any way to send images to Photoshop for editing - all I can do is send them to elements editor or the premier editor. Can someone tell me how to send them to Photoshop? Thanks!
Hi,
The D810 requires Camera Raw 8.6 or later - the latest version that is compatible with Photoshop Elements 12 is Camera Raw 8.5 as far as I can see.
You need to either buy a new version of Photoshop Elements or use the free Adobe DNG converter.
DNG Converter 8.8
Win – http://www.adobe.com/support/downloads/detail.jsp?ftpID=5888
Mac – http://www.adobe.com/support/downloads/detail.jsp?ftpID=5887
Useful Tutorial
http://www.youtube.com/watch?v=0bqGovpuihw
Brian
Maybe you are looking for
-
FI -Account Statement and Aging calculation
Hi all, I need to develop an account statement for customer open items (FI) in smartform and also need to do the aging calculation at the end of main window ....for the days like 30,60,90,120,150,and grtthan 150 which is given at selection screen.
-
Afraid of system being compromised - newbie in "security"
Hello, PART 1: There are two computers. Computer A uses openSuse and it is usually used for common tasks (not risk at all), suddenly, one day some "bookmarks" from Mozilla Firefox were modified but not by the legitimate users. The firewall rules were
-
Hi, I am a newbie to AS. Nice to join the family and meet u all. I got some problem during installation of AS 2005Q2, when I install and select 'Config Now' option, I cannot pass since the DNS hostname always fail. If I select 'Config Later', I will
-
Building Book TOC in CS4-Problem with cross chapter TOC links in Acro pro
QUESTION: How do I fix the CS4 or ACROBAT v9 Pro Extended problem to fix cross chapter TOC Hyperlinks in BOOKs. PROBLEM: When I build a CS4 BOOK TOC, the TOCs show up in the .indd. However when I .pdf the book, the links fail. I am an experienced Fra
-
I am using the code below to create a toggling selection screen. So based on the radio button selected, it displays different select options. In BLOCK b3, the matnr and werks is obligatory, so when I try to change the screen, it gives out all require