After "insufficient power" message, N9 appears to ...

Hi,
I've got an N9 on PR1.0 (10.2011.34-1.339.01.2_PR_339). When I connect it to my car charger (2 different, actually), or my GUM plus charger, they're recognized as a computer. I just tap the "X" to dismiss the dialog, but then I get the "insufficient power to charge this device" warning.
But then, the battery icon shows the charging animation just the same. Now so far, it's only been for a quick top-up in the car. Upcoming is a longer roadtrip. Does anyone know if the phone is actually charging when this happens?
Thx,
drew
P.S. All three of these adapters will charge, for example, my power-hungry iPad. I don't think they're not providing enough current, really.
P.P.S. I've read about shorting the data pins on the charger, but I'm not so keen to try this. And I definitely don't want to try that with my GUM plus. :-O
Solved!
Go to Solution.

@aspergerguy
True dat. I did a quick comparison, and the phone trickles towards charged with the non-Nokia charger. The Nokia charger is much, much faster.
If I "short out the data pins" on a non-Nokia charger, like it says out there in the interwebs, that's not going to affect how fast it charges, is it? I know I'll avoid the screen associated with connect as sync or connect as mass storage, but will the phone charge better just because of that?
I have two car chargers, I might just have to try a little surgery on one of them and find out.
Unless someone knows off hand.
:A\>
drew

Similar Messages

HT5622 My ipad hangs up after showing a message that says it "Cannot Access Find My Friends" and that I need to open the app and review my signin info to continue sharing. I can't go there because it is hung up. I also can't power off.

My ipad hangs up after showing a message that says it "Cannot Access Find My Friends" and that I need to open the app and review my signin info to continue sharing. I can't go there because it is hung up. I also can't power off.

Perform a Reset...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

Photoshop suddenly does not print to Epson 3880 - PROBLEM: Cannot print from Photoshop After restart error message appears: - "There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopen

PROBLEM: Cannot print from Photoshop
After restart error message appears:
— “There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents.”
• All print commands are greyed out and unavailable — even to call up the printer commands cannot be done.
The printer printed fine until about 2 weeks ago when this error message appeared. Printing continues from Pages, I-photo, preview etc. — only Photoshop fails.
The printer has been turned on and off, as have open documents been closed and open etc.. Preferences reset. Repeatedly I have read through blogs and forums and attempted to contact Adobe — all without results
Epson support struggled to find reason and several solutions were tried and they assume this is an Adobe problem.
Running Mac Powerbook X 10.10.2 / Photoshop CS6 13.0.6.x64
Attempting unsuccessfully to print to Epson 3880
What Adobe support will be of help.
Robert Darling — 2/19, 20, 21,22,23/2015

Probably best to ask in Photoshop General Discussion
This forum is about the Cloud as a delivery process, not about using individual programs
If you start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

TS2998 After upgrading to Snow Leopard, Mail will not let me archive any mail. All archived messages re-appear in my inbox (I have tried archiving and placing in the trash bin).

After upgrading to Snow Leopard, Mail will not let me archive any mail. All archived messages re-appear in my inbox (I have tried archiving and placing in the trash bin). How do i regain control of my inbox?

The main differences that can cause a problem are scripting additions (64-bit vs 32-bit and security reasons) and the usage of dates (it is not as forgiving). AppleScript itself is basically the same, so if empty paragraphs are what caused your problems the update would have just been a coincidence.

I plug in my printer and I get a message that says, "the disk you inserted is not readable." It didn't do this before but after I installed a segate hardrive software. I have removed the segate hardrive software but the message still appears.

I plug in my printer and I get a message that says, "the disk you inserted is not readable." It didn't do this before but after I installed a segate hardrive software. I have removed the segate hardrive software but the message still appears. What can I do to remove this error.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below on this page to select it:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -f -a TextEdit
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Repeat with this line:
{ sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; sudo defaults read com.apple.loginwindow LoginHook; sudo crontab -l; } 2> /dev/null | open -f -a TextEdit
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
{ launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}'; crontab -l 2> /dev/null; } | open -f -a TextEdit
Step 4
ls -1A /e*/{la,mach}* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts .la* 2> /dev/null | open -f -a TextEdit
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' | open -f -a TextEdit
Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

After a power failure while iPhoto was running, I get the message "Your photo library is either in use by another application or has become unreadable" and iPhoto will not open????

After a power failure while iPhoto was running, I get the message "Your photo library is either in use by another application or has become unreadable" and iPhoto will not open???? held down the option and the command and tried to run what was ticked off and it just sits there with a spinning wheel and does nothing, can I throw the app away and download a new one? or will it still not open?

, can I throw the app away and download a new one? or will it still not open?
You could, but the error message is indicating that your iPhoto library needs repairing.
Check, if iPhoto will run, if you launch it on a new library. Hold down the alt/option key, while you launch iPhoto. Select to create a new library from the panel that will show. Can you create a new library? If yes, try again to fix the library. Which options have you tried from the Library First Aid panel, when you launched iPhoto with the option and command key held down?
If you have not tried "Rebuild"; do that next. But be sure to make a backup of your iPhoto library, before you try this.

Sent messages only appear in the sent folder after restarting Thunderbird

Hi, my problem is that sent messages do not appear in the sent folder unless I restart Thunderbird. I have the sent 'copies' box de-checked as if not although it syncs I end up with two copies (of sent messages).
I am using Thunderbird 31.2.0 on OSX Yosemite connecting via IMAP to ZOHO mail with STARTTLS on 587 for SMTP.
Hope you can advise, I've tried SSL/TLS on 465 also and it is the same. It's a bit of an inconvenience not being able to view the sent messages.
Many thanks

Interesting to know (the RFC violation) but as you say, perhaps not relevant as such, although if ZOHO wasn't auto-placing a copy in sent then I could check the 'place a copy in' option and it would work ok.
Anyhow, I tried your recommendations and yes, I use both an Android and an iPad to also check my mail but with both disconnected from Wi-Fi the problem still persists. There are a few warnings being reported in the TB error console on the Mac but they just relate to 'mso-table-lspace' for my INBOX.
And for info in Thunderbird on my Ubuntu laptop the problem is exactly the same -
'Place a copy' checked - Messages instantly appear in the sent folder but there are two copies.
'Place a copy' de-checked/Cached connections = 5 - Messages only appear in the sent folder after restarting Thunderbird
'Place a copy' de-checked/Cached connections = 1 - Messages appear in the sent folder on clicking out of the folder and back in.
On Ubuntu there is nothing at all in the error console.
I can work with how things are at this stage as I don't live in the sent folder (rather the inbox), and when you click into it (with the connections cache at 1) the messages do appear, so I suppose that's actually ok.

Our service provider add one digit to all nos. After I update all contacts using one of available programs, contacts are updated but messages received appear with pure phone nos not contact name??any fix

Our service provider add one digit to all nos. After I update all contacts using one of available programs, contacts are updated but messages received appear with pure phone nos not contact name??any fix

http://discussions.apple.com/thread.jspa?threadID=2280669&tstart=0

I've tried to update my ipad 2 with IOs 6 but it was not possible. An error message always appear after some time during e download. Is there an solution?

I've tried to update my ipad 2 with IOs 6 but it was not possible. An error message always appear after some time during e download. Is there an solution?

Are you trying to update via wifi or connected to your computer?
 Cheers, Tom

When i am trying to create an itunes account in ipad 3 and in payment method i select none and after it when i select create ID. "Please contact ITunes Support to complete the transcation" this message will appear. kindly help me

when i am trying to create an itunes account in ipad 3 and in payment method i select none and after it when i select create ID. "Please contact ITunes Support to complete the transcation" this message will appear. kindly help me

You can contact iTunes support via this page (these are user-to-user forums) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

Saved messages re-appear months after being sent

Yesterday 101 messages "suddenly" re-appeared in my DRAFTS folder. Several of the 101 messages were repeats so the number of unique messages was smaller.
I can identify a few of these as messages I took a long time to compose - so there may have been a "proper" save in DRAFTS in these cases.
I resent a copy of each of these messages to trusted correspondents - a few were newly received and several were duplicates.
Questions:
1. Why now? This is a new problem, I routinely look for "next" when I near the end of my inmail processing, this time the DRAFTS folder showed up with over 100 messages.
2. How do I tell, short of scanning the SENT or respective folders, if the mail was sent.
3. Since the problem took months after some of the original messages were sent, how do I just make it go away - and be sure the messages I send are actually sent.
NB: The problem is nearly identical to a "reported and closed/fixed" problem in Microsoft Office Outlook 2010. That problem was closed with a fix to Internet Explorer - could that be related?
Thank you. /Stu

Interesting to know (the RFC violation) but as you say, perhaps not relevant as such, although if ZOHO wasn't auto-placing a copy in sent then I could check the 'place a copy in' option and it would work ok.
Anyhow, I tried your recommendations and yes, I use both an Android and an iPad to also check my mail but with both disconnected from Wi-Fi the problem still persists. There are a few warnings being reported in the TB error console on the Mac but they just relate to 'mso-table-lspace' for my INBOX.
And for info in Thunderbird on my Ubuntu laptop the problem is exactly the same -
'Place a copy' checked - Messages instantly appear in the sent folder but there are two copies.
'Place a copy' de-checked/Cached connections = 5 - Messages only appear in the sent folder after restarting Thunderbird
'Place a copy' de-checked/Cached connections = 1 - Messages appear in the sent folder on clicking out of the folder and back in.
On Ubuntu there is nothing at all in the error console.
I can work with how things are at this stage as I don't live in the sent folder (rather the inbox), and when you click into it (with the connections cache at 1) the messages do appear, so I suppose that's actually ok.

Hi, messages still appear in iPhone search even after they are deleted from iPhone.

Hi, messages still appear in iPhone search even after they are deleted from iPhone.

Yes and as long as you are signed into iCloud - you can even use that phone to iMessage
The messages stay on there until you wipe / erase / restore your old phone

Get "using too much power" message when charging with USB

I have a 4th gens iPod Touch that appears to have a number of issues:
1. get "using too much power" message when charging with USB
2. can't re-boot
3. unable to access iCloud Backup, Ignore and Settings button inactive
4. unable to unlock unit when using the Home button to turn the unit on

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

I'm using a macbook pro, running snow leopard. Yesterday I got around to emptying my trash for the first time in quite awhile and was surprised by how much there seemed to be in there. Immediately after a question mark symbols appeared on all my hard disk

I'm using a macbook pro, running snow leopard. Yesterday I got around to emptying my trash for the first time in quite awhile and was surprised by how much there seemed to be in there. Immediately after a question mark symbol appeared on all my hard disk folders. If I click on these question marks I get a message saying ' the item can't be found'.

mpagan47 wrote: a question mark symbol appeared on all my hard disk folders.
Not sure where these hard disk folders are located that you are referring to? Finder, Finder tool bar, Finder side bar, Desktop, Dock?
More then likely they are an alias that not longer point to the orginals, thus the question mark.
I would reboot. Delete icons if an alias and just recreate by dragging from the source. Try right click (control) click to remove.

About 1 year ago, I can not access the App Store. The message that appears is: "One Moment Please. Connecting to the iTunes Store. Loading ... I've tried all the aids presented in this and other forums and nothing solves. iTunes connects normaly...

About 1 year ago, I can not access the App Store. The message that appears is: "One Moment Please. Connecting to the iTunes Store. Loading ... " I've tried all the aids presented in this and other forums and nothing solves. iTunes connects normaly...

Your profile indicates your Mac is running v10.7.2
If that is correct, updating your system software may help.
Click Software Update from the Apple menu.
Restart your Mac after updates are installed then try the App Store.
If you can't update that way, there's a workaround.
Install the OS X Lion Update 10.7.5 (Client Combo)
Then restart your Mac and try the App Store.
messaged edited by: cs

After "insufficient power" message, N9 appears to ...

Similar Messages

Maybe you are looking for