After iOS 4, 3G service no longer works on my 3G

I, too, have had horrible thinhs happen to my 3G after the iOS4 "upgrade." I've tolerated most, but now 3G service is not working.
Anyone have 3G no longer working on their 3G? Any fixes work for you?

Connect your iPhone to your computer, open iTunes, and on the main iPhone section you'll see a restore button. Click it and it will take you through the steps. Be sure to backup your iPhone though, syncing it with iTunes will do this for you. Also take off your photos and so forth before you restore just to be safe.

Similar Messages

  • After updateing my iPad Air 2 to iOS 8.3, it no longer works

    After updating my iPad Air 2 to iOS 8.3, it no longer works.  It is a 64 GB model.
    The opening screen is the same as when I first starting using it, with "welcome" in various languages.
    I have gone through the operations requested, iCloud, etc. but at the very end I get my home screen for about 1 second, then the machine shuts down.
    I backed up and synced the iPad before installing iOS 8.3, and tried a restore, but it made no difference.
    You guys out there have never let me down yet!  I hope you can help!
    Thanks in advance.

    You're not alone in this problem.  My iPad Mini 3 was working great until the iOS 8.3 update, which kicked into the same loop you're describing.  Sounds like at least one person has had luck with factory restore.  Check out the thread here:  Anyone else seeing issue with iOS 8.3 update on iPad Mini 3?

  • Location services no longer working after 4.3.3 update.

    I have a 3rd Gen 32GB touch, and after updating the software today, my location services no longer work. My device fails to find my location for the maps app, as well as other 3rd party apps. There was no problem with finding my location prior to this update, and other devices on my network aren't having an issue pinpointing a location either.
    I have tried restoring my iPod as well as turning the location services on and off.
    Any help would be greatly appreciated (:

    I have the same iTouch and have experienced the same problemafter updating the software.
    If you go to Settings>Location Services and it says “ON yet it’s gray and faded, please read on.
    Go to Settings>General>Restrictions (Enter Passcode)>Allow Changes:Location
    The page should have something that would say “Allow Changes”, “Don’t AllowChanges”….and some of the 3rd party apps that need location servicesas you mentioned listed below. Tap “Allow Changes” and slide “Location Services”ON. Then manually slide the 3rd party apps that you want to enableLocation Services to ON.
    Then, you’re good. Hope it works out. Frustrating, I know.

  • I bought a Sandisk Connect Media Drive, downloaded the app from iTunes.  Before iOS 8, movies played fine.  After iOS upgrade I can no longer play movies downloaded from iTunes to the media drive.  Anyone else have a similar issue?

    I bought a Sandisk Connect Media Drive, downloaded the app from iTunes.  Before iOS 8, movies played fine.  After iOS upgrade I can no longer play movies downloaded from iTunes to the media drive.  Anyone else have a similar issue?

    I checked with SanDisk's own online support and they indicate that they have notified Apple of the issue.
    According to SanDisk, the problem lies with Apple not having the iOS 8 version of the Safari browser having DRM decoding enabled that the Media Drive relies upon to decode and play iTunes DRM titles. Non DRM encoded videos will play in the browser.
    DRM audio is not effected as this is handled by the native iOS music app.
    As of the date of this post SanDisk have not been given a timeframe by Apple for this issue to be resolved.
    I hope that Apple resolves this issue quickly as I have a large collection of DRM video titles on a 128Mb memory card installed in the Media Drive that I am unable to view.

  • After the last update iTunes no longer works...  "This application failed to start because MSVCF80.dll was not found.  Re-installing the application may fix this problem"  I tried and it did not fix the problem?

    After the last update iTunes no longer works...  "This application failed to start because MSVCF80.dll was not found.  Re-installing the application may fix this problem"  I tried and it did not fix the problem?

    Click here and follow the instructions.
    (99061)

  • I hate the new operating system. Can't connect to wifi in home anymore even after a restore. Rhapsody no longer works on my phone either. Plus the brighth graphics are bothering my eyes even with brightness turned down. Any ideas on why rhapsody doesn't w

    I hate the new operating system. Can't connect to wifi in home anymore even after a restore. Rhapsody no longer works on my phone either. Plus the brighth graphics are bothering my eyes even with brightness turned down. Any ideas on why rhapsody doesn't why rhapsody doesn't work anymore?

    Contact Rhapsody to see if they have or plan to release an update for the app. Try uninstalling and reinstalling the app. Have you tried resetting your device by pressing and holding the Home button and power button until the silver apple appears?

  • After installing Mountain Lion, Expose no longer works.

    After installing Mountain Lion, Expose no longer works.

    Unfortunately the Expose feature as you know it from Snow Leopard was removed by Apple in Lion and Mountain Lion.
    You can make all windows for an app 'expose' by putting the cursor on the Dock icon and using a 4-finger swipe-down.

  • After ios 5 upgrade, backup didn't work itunes error 50 ?

    after ios 5 upgrade, backup didn't work itunes error 50 ?

    Did you check this article about your error message? iTunes: "Backup could not be saved on the computer" error message
    This article explains how to replace the backup folder with the one from your computer backup: iOS: About backups
    Message was edited by: Ingo2711

  • After updating to iOS 7.1 calling no longer works

    After I updated to 7.1, everything works fine except for calling/my phone number. iMessage and FaceTime only work when using my email but when people call me it goes straight to voicemail and when I call people I just hear nothing. The LTE works fine but I just have no bars. Is this a hardware or software error?

    http://docs.info.apple.com/article.html?artnum=93610

  • Messages on MacBook Pro after iOS 8 update on iPhone not working

    So, all my Apple products and services have been working smoothly until I updated my iPhone 5 to iOS 8. Oddly enough, after that my Messages app on my mac stopped working. I logged out, and TRIED to log back in, but it says "Your Apple ID can't be used to set up iMessage at this time." and then it gives me a customer code. I rely heavily on this feature, and would love to use this feature when I finally get my hands on a 6, BUT how do I fix this?
    Any solutions?

    Hi,
    If it looks like this:-
    The only "Fix" is to call Apple Support.
    You have to be clear is is an Account issue with logging into the iMessages account from the Mac.
    Sometimes you have to ask to speak to the Level 2 person as the front line people are working to a Script and will  tell you your Warranty has run out and you need to pay.
    It is NOT and Hardware problem.
    It is NOT a Software issue.
    The Messages App just happens to be the one reporting it.
    9:33 pm      Thursday; September 25, 2014
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • IPod Touch on iOS 6.0.1 no longer works with docking station

    Hi there,
    I have an iPod Touch 4G recently upgraded to iOS 6.0.1. and a Philips AJ7041D/12 docking station for that.
    After the upgrade to iOS 6.0.1. the IPod says the docking is not a supported device and they no longer work together.
    Does anyone know how I can get things working again?
    Your help will be much appreciated.
    Regards,
    Dick

    Sometimes this works. However, sometime an iOS upgrade breaks compatibility and yoo will have to wait for an IOS update or an update to your dock's firmware.
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:       
    iOS: How to back up           
    - Restore to factory settings/new iOS device.

  • After update to 6 shortcuts no longer work in message

    hello everyone,
    I have a peculiar message problem which I noticed right after updating to iOS 6.  The shortcuts I used in message no longer work. I checked in settings and they are all still there but they are not active. I have so far tried deleting and re-creating one of the shortcuts, closing and re-launching the message app, and turning my phone off and re-starting it. All to no avail. Has anyone else encountered this problem, and does anyone know of a fix?
    Thanks for reading, and for your support...
    Tim

    This is what I did step by step and it worked like a charm... I had an iPhone 4 when I did this a few days ago. I have documents and data ON in iCloud...
    1. write down or take screenshots of all existing shortcuts
    2. delete all shortcuts
    3. backup to iCloud (I think this clears all shortcuts you have stored in iCloud)
    4. go back to settings-->general-->keyboard... You may notice one or a few generic shortcuts pop up on their own. The one that popped up for me was OMW (on my way)
    5. re enter all of your shortcuts and phrases
    6. when done, back up again to iCloud (stores your new shortcuts)
    I restarted my phone. Shortcuts still worked. I just got a 4S and restored from the iCloud backup mentioned in step 6 and my shortcuts worked on my new phone.
    Good Luck. I hope this helps everyone.

  • IOS 4 / Exchange 2003 No longer works

    I just upgraded my iPhone 3G to iOS 4.0. We did not have any problems with connectivity with an Exchange 2003 mail server. Now my Inbox no longer works. My calendar and contacts work just fine. I make an update on my phone and it is pushed to Exchange. We are running Exchange 2003 and ISA Server 2004. I checked the firewall logs and everything is clean. My other external emails are just fine. Any ideas?

    I had 3 users show up with iPhone 4s. 2 of the 3 synced fine against Exchange 2003. The third would attempt to sync but eventually time out and get a server connection failed error after adding the account. All three users were previously syncing fine with iPhone 3GS phones against the same Exchange 2003 setup.
    Upon further inspection I noticed that the account was successfully connecting and retrieving the mailbox subfolders that the user had created and that the user was able to send mail from his phone. This led me to believe that there was nothing wrong with the account but rather the phone was having trouble enumerating all of the mail in the user's mailbox.
    Turns out the user had around 40,744 items in his main inbox folder. Upon creating subfolders for 2004/2005/2006/2007/2008 and moving all older mail into these subfolders, the user was left with approximately 13,000 items in his main inbox from 2009-2010. Immediately after archiving the older mail, the phone began successfully syncing again.
    Hope this helps

  • After iOS update, my iTunes no longer sync 'ERROR MESSAGE'

    After the new iOS update on my phone, my iTunes on my MAC will not sync. The error message I receive says I need to update iTunes, but it's already updated to the last version and there are no updates available when I go thru the iTunes menu.  HELP!

    Apple fans. Don't fret. I struggled with this since Saturday when I got my new phone. im pretty tech savvy with a background in computers and I'm a mechanic by trade so i generally know how things work and figure out anything. After trying everything you all have probaby tried as well I did some comparisons to my wife's phone. I paid all three of our cars to her phone easily. One is a Honda hand free link, the other a Hyundai sonata system and the last a pioneer aftermarket Bluetooth with streaming,avrcp etc. after her iPhone 6 128gb connected and worked flawlessly, I narrowed the problem down to my phone specifically. It's not the phone, it's not the ios8, it's not your car. It's your settings. All I did was reset network settings and bam. Problem fixed. You see I messeed with a bunch of stuff in the beginning trying to avoI'd data overage and must have turned something off by mistake. Another theroy I have is my iPhone 5 setting were copied over in the process of migration and they were maybe incompatible with the iPhone 6 itself. Either way post back and let me know if this helps

  • Iphone 4 since upgrade to ios 5.1.1 no longer works with made for itunes, iphone devices.

    Ever since I upgraded to IOS 5.1.1 my Iphone no longer works for playing music thorugh my Apline car unit, My Logic 3 clock radio, and a Next made for ipod device.
    I can sync through ITunes on the PC and can also play videos through the HDMI adapter.   My wifes iphone 4s and the kids  hand me down iphone 3s still play fine through these made for Itunes , Ipod , Iphone devices.
    I want to downgrade back to the prior IOS  I had before Apple encouraged me to install this bugged one.   How do I go about getting a legit non jailbroken prior IOS version installed on my Iphone?
    Is Apple aware of this issue , as I have seen blogs about this it is affecting other people?   Will this issue be resolved with ios 6?
    Can I get the beta ?
    Thanks,
    Douglas

    Agreed. Same thing here. Just bought a late model Alpine INE-S920Hd and it is all kinds of broken. I think this is happening because Apple shifted the music and video. Totally buggy. Bluetooth refuses to work properly, too. A2dp keeps stealing the audio from Pandora in the Alpine interface. The ipod controls dont work at all.

Maybe you are looking for

  • Fonts all screwed up in Mail because of Fontbook?

    So i added a whole bunch of fonts to my Fontbook so that i could, you know, use them, but then when i opened up my Mail, the fonts were all screwed up. i changed them back in Mail preferences, which fixed most everything, but left the headers in the

  • How to show image related to record in Bex

    I'm working to display the image directly in the workbook at item level per each material/record in the query result. How to I have to define an VBA macro to display the image? The image will be in an application server and the path will be simply de

  • Fund Center

    Hi Sapiens, Where do we assign the Authorisation Group for a Fund Center in Fund center Master Data i.e.,Creation of Authoriasation group for a fund center. There are few WBS elements to be settle which are capitalised. I am unable to settle the same

  • Issues with W_DAY_D

    Hi All, I have 10 years of data for Order Management that was loaded as Full. I am running nightly incremental loads. I needed to replace the fiscal month calendar with the one client is using, i.e July is first month and June is month 12. I placed t

  • Flex mobile charting issue

    I tried to create column chart using the data model from the previous view, I used var object to transfer the data but the chart does not work. Help PLEASEEEEEE  and if you have tips for passing data to a view please. <?xml version="1.0" encoding="ut