After iOS 5.0.1 OTA update Siri is no longer working
Anyone having the same issue? Since I updated to 5.0.1 Siri no longer works. All I get is the typical " I'm really sorry about but I can't take any requests right now. Please try again in a little while ".
Any ideas? I've powered off the phone, rebooted the phone a couple of times yesterday. Didn't work. I tried this again this morning and it's not working either.
All was good, My battery and SIRI were working fine, then my bad luck that i updated my phone to iOS 5.0.1 (which is promissing better battery life and Siri funcionality). After updating all went crazy, SIRI is not working any more (it says cant do any thing right now and try later, and i am now trying from 2 days), Battery is not lasting longer then 12 hrs as it was better before. I am seriously thinking to go back to my iPhone 4 and distroy iPhone 4S
APPLE????? i need answers????
Similar Messages
-
Calendar List not displaying all dates after iOS 5.0.1 OTA update
Following the recent iOS 5.0.1 OTA update, in list mode my calendar now only displays days on which I have entries. Previously it showed a list of all days. Can this be changed by a setting somewhere or is this a bug in the iOS?
All was good, My battery and SIRI were working fine, then my bad luck that i updated my phone to iOS 5.0.1 (which is promissing better battery life and Siri funcionality). After updating all went crazy, SIRI is not working any more (it says cant do any thing right now and try later, and i am now trying from 2 days), Battery is not lasting longer then 12 hrs as it was better before. I am seriously thinking to go back to my iPhone 4 and distroy iPhone 4S
APPLE????? i need answers???? -
After updating my 5S to ios 8.1.2 sync calendar to outlook no longer works
After updating my 5S to ios 8.1.2 sync calendar to outlook no longer works, using iTunes 12.0.1.26.
It will sync from Outlook to the phone, but not from the phone to Outlook. This was working last week with the last version of iTunes and ios 8.1.1Hello MEOS001,
If you are not seeing any changes being made over to your iPhone and vice versa to your computer, take a look a the article below. It will walk you through resetting the SyncServices Folder as well the Sync history. It may also be an issue with any plug ins that Outlook may have installed that may be preventing the sync.
Troubleshooting Sync Services on Windows with Microsoft Outlook 2003, Outlook 2007, or Outlook 2010
http://support.apple.com/en-us/HT203300
Take care,
-Norm G. -
HT4528 after upgrading to IOS 7.1 the camera on my 5s no longer works
after upgrading to IOS 7.1 the camera on my 5s no longer works. Prior to the upgrade, I had no issues with the camera
Hi JoieC,
If you are having issues with the camera on your iPhone after a recent update, you may find the Camera troubleshooting portion of the following article helpful:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Regards,
- Brenden -
After installing the latest itunes/quicktime update I can no longer acces the itunes store nad my iphone does not complete syncing. What can I do to fix this? I have tried uninstalling and reinstalling itunes. I have uninstalled and reinstalled windows updates. I have checked the firewall settings. what else?
The problem is with version 10.4.1. I had to reload 10.3 to get it to work. The recommendation from a previous poster worked for me. Here was their list of steps:
Go to Control Panel>Programs>Uninstall
2. Uninstall the following Apple programs in the following order:
a. iTunes
b. QuickTime
c. Apple Software Update
d. Apple Mobile Devices Support
e. Bonjour
f. Apple Appllcation Support
3. Reboot PC
4. Find, Download and Install iTunes 10.3 (you can find it at FileHippo.com)
If you start iTunes now you will get an error message saying that the current iTunes library was created by a newer version of iTunes. To correct this:
5. Go to your Music>iTunes folder and delete the "iTunes Library.itl" database file
6. Within this iTunes folder find and open the "Previous iTunes Libraries" folder and locate the most recently dated "iTunes Library (date).itl" database file.
7. Copy and Paste this file back into the iTunes folder
8. Rename this "iTunes Library (date).itl" file by removing the date. It should say "iTunes Library.itl"
9. Reboot PC -
Under the Mac Yosemite 10.10.2 O.S. -- the System Preferences: Java pane/ctrl-panel: Update-tab-function no-longer works, after updting to Java 8v40 JRE & SDK -- says that the internet connection is not valid !
A few questions....I assume your network is connected to the Internet? Do you use a proxy? If so, is it set in the browser or in the Java Control Panel?
-Roger -
Presently running mac osx 10.5.8. Recent Firefox update says it no longer works with osx 10.5 and it's no longer supported by apple. Any suggestins?
Use an earlier version of Firefox, use Safari, or upgrade to a later version of OS X. Any Intel Mac can run Snow Leopard.
Latest version of Safari for Leopard: http://support.apple.com/kb/DL1422
Information for Firefox: http://support.mozilla.org/en-US/kb/firefox-no-longer-works-mac-os-10-4-or-power pc
http://support.mozilla.org/en-US/kb/firefox-no-longer-works-mac-os-x-10-5 -
Since the update my password no longer works only on apple tv
Since the update my password no longer works on apple tv
Cute. I redid my apple password last nite and made it real simple. It worked fine signing in to the forum just now. When I use it to sign in on Apple TV I keep getting message. ' server not available'. I had gotten it to sign in earlier but netflix wouldn't play the movie. Just the previews. So I reset everything and tried to start over and I can't log on at all. So if you have any helpful suggestions I would be interested in hearing them. Thank you
-
IOS 6.1.2 OTA update failed while 6.1.3 available
Recently my iPad (an iPad 2) asked me to download iOS 6.1.2 using OTA update, which I did, but did not installed the update right after.
Now iOS 6.1.3 is available and I'd like to update, but the iPad only wants to install 6.1.2 and fails while trying yo validate the update. It tells me that I'm not connected to internet, but I am.
My guess is that the signing window for iOS 6.1.2 is closed, therefore the update cannot be validated, but the iPad doesn't seems to be checking for newer versions.
Is there any way I can bypass 6.1.2 install and get strait to 6.1.3 ?
I know I can still use iTunes to do that but I'd really like to avoid downloading a whole iOS update.
MichaelI work in a school where we have over 600 ipads, this became a problem for us as well. I did find that if you continue to wifi settings select the network you are joined to, forget the network that you are on, turn the ipad off, restart ipad, rejoin your network, and then try update software again the ipad will change to IOS 6.1.3 instead of IOS 6.1.2 during the "verify error" stage everyone is getting. There were a few ipads that I had to follow these steps a couple of times before it finally "skipped" the IOS 6.1.2 update and changed to the IOS 6.1.3 update. Once the change occurs at top of screen, the installation will work as intended. Have now used this workaround about 30 times and and it has worked everytime. Hope this helps.
-
IOS 8.0.2 OTA update stuck in recovery mode
After OTA update 8.0.2 reboot, my iPhone 5 get stuck in recovery mode.
Recboot can not fix normal mode, nor tinyumbrella.
All iOS data recovery software asks me to enter passcode, or that iPhone is not in normal mode.
I need to recover images and videos from last 5 days.
Any suggestion?
Thankssame thing happen to my BF, had to plug it into the computer and connect to iTunes. Made use redownload the new update then to install an old restore. TOOK FOREVER
-
After installing the latest update to Firefox onto Vista operating system the record part of real player no longer works, I think Mozila and Real are using a library file with the same name and the Mozila update is overwriting a Realplayer library file.
I was giong to say, "Help me, Adobe Joe Kenobi", but it looks like you're growing a beard waiting for an answer, too.
The same thing happened to me today. I trusted the "update" message since it was from Adobe, and apprently did so at my own peril. Now I get the "failed to load Core dll" message with a secondary reference to a memory address.
Just an observation, but what good are these forums when there are no answers? I see this problem as "Caused by Adobe Update", and would expect them to troublshoot and offer up a remedy. Since you've been waiting over two months with no response, I suppose it's time to trek off wasting more of my precious time to fix their problem. If I find the solution, I'll post it back to you.
May the Force be with you.
Mark -
MMy Brookstone Scanner no longer works with IOS 8.0. Is an Update coming to fix this?
You'll have to contact Brookstone, the developer of the app in question to find out if they will update the app.
-
After latest updates Studio Software no longer works...
After the most recent pro Apps update all my Studio 2 apps except DVD Studio Pro have quit working. I am working with a Dual 1.8 GHz PPC G5 with 3 GB of ram and OS X 10.4.11. I have installed all the most recent updates for all the programs including Quicktime.
Has any one else experienced the same thing?
Suggestions how to identify or fix the problem?Reinstall of FCP 6 did not seem to fix anything so I have reinstalled FCP 4.5 only to discover it will not work with HDV footage.
I am wondering if the problem is with my computer in that perhaps it can not run FCP 6. It is a Dual 1.8 GHz PPC G5 with 3 GB of sdram and an ATI Radeon 9600 XT video card running an Apple studio Display and an Acer 2416W Display.
Could this be the problem?
PS: thanks for the cloned system idea - will do as soon as I get this one running again. -
After software update usb mouse no longer works.
After software update Microsoft usb mouse no longer works. System Profiler "sees" usb mouse. I took my macbook to the Genius Bar at Apple and they were not able to help. Pretty lame....
any ideas on how to solva this?
-
After Flash Player 10.1 update, BitmapData copying no longer works?
Hi,
I recently updated to the 10.1 flash player. However, after the update - none of the application within which I'm using the BitmapData class (AS 2.0) work anymore. The source graphic loads fine, but the .draw procedure that used to work fine no longer works at all.
I'm definately not alone on this issue, as a number of my colleagues in the office have reported the same behaviour. Once I uninstalled the 10.1 update and reinstalled an older version 9.x update, the BitmapData copying works fine again.
Bit stumped on this one. Anyone else experiencing this issue?
An example of one of the SWFs that use this facility is shown at the top of the page here (in the grey box area):
http://www.southeastfarmmachinery.net/
Here's a screengrab of the issue in question:
I'm running Windows 7 (32bit), this issue seems to affect Flash Player in all browsers (tested in IE 7, IE 8, Firefox, I haven't got around to testing it in Chrome, Safari or Opera etc..).
Any help would be appreciated, thanks!
AndyThanks for the reply, but I think the problem isn't as simple as you suggest.
Firstly, I'm not sure why I would need to update my video drivers to the latest version, when clearly this functionality was working 100% correctly before the Flash Player update. And on this same note - what about the many devices that run OEM hardware (i.e. laptops) that have pre-baked drivers that are never updated? (Thanks, nVidia!)
Secondly, I'm pretty surprised that the suggestion was made to disable hardware acceleration. Why would this be necessary? I understand that Flash Player ties into the GPU for some tasks - but as far as I'm aware, the visuals we working in one version (presumably with the default hardware acceleration enabled), and now - they are not. Does this imply specific changes to the hardware acceleration code used in Flash? Or is it, as I suspect, a more serious problem with a fixed-bug that has unravelled another part of the player.
The main issue I have here is that we now have many clients complaining that their flash clips we've made (that use similar functionality as that linked to above) no longer work - and they see the same white screen.
I appreciate your insights here - but you must appreciate that we can't just start emailing all our clients saying, "Oh, by the way - can you go into 'x' control panel and disable your flash hardware acceleration, oh and whilst you're at it - download and install the latest video drivers for your machine.". They'd have a conniption - and we can't expect our clients to just do all of that for the sake of a mistake made by Adobe.
You mentioned that this isn't the right forum for raising these specific issues - although I can see that mostly all bug issues seem to end up here. Would you be so kind as to point out where I should be posting this issue, so that I can bring it to the attention of the right people?
I was hoping more people would notice this, but I appreciate that it's more of a developer-specific problem.
Andy
Maybe you are looking for
-
IPhone Reminders App Won't Sync
My iPad, iMac and iCloud web page all sync with Reminders, but not my iPhone 4. anything I enter (Reminders, Lists) on the phone only stays there and won't sync, even though I have it turned on in iCloud settings.
-
Default location for file browse dialog
OK, I know this is not solely an APEX issue, but is there a way that one can specify a starting location when invoking the file browse dialog?
-
Hi All, We have recently installed Service Pack 4 In SharePoint 2003 I,e SPS 2.0 , we ran the stsadm upgrade command from the Command Prompt , since 5 days the upgrading the sites windows showing and does it completes or not or is there some thing
-
Hi, A 30gb table with direct=y option in export 10.2.0.3 is getting failed with ora-01555 snapshot too old error. What is the best way to avoid the error? 1)Increase undo 2)Increase undo_retention 3)Use direct=n or anything else?
-
Flex 4 FABridge dosen't work in subapplications
Hi, i try to map the class interface to javascript with <fx:Declarations> <fab:FABridge xmlns:fab="bridge.*" /> </fx:Declarations> The effect is that the FABridge is for the parent class and for the current class corrupted. Have some one an idea?