After ios 7.1.2 upgrade on iPhone 4S, my MacBook Pro does not recognize any photos to upload
My computer recognizes my phone, yet continues to state that there are no photos!
Try lauch iTunes.
Then connect the Phone/iPad
When it asks you to trust it, say yes.
Then try import.
Similar Messages
-
My MacBook Pro does not recognize my Android Incrdible 2 cell phone and therefore I can not transfer any photos from my cell phone to my Mac. I was able to do this in the past, but can not do so now. I have not upgraded to any new software. My USB cable is plugged in properly and I just get an error message -- "No Android Device Found". What could be the problem?
I had the same issue with the Galaxy S4 trying to see what the hype was about and was my first and last android phone. With that being said unfortunately it is a hit or miss with the Mac recognizing an android device or not. It worked perfectly fine the first time around and then it stopped working for no apparent reason. Through trial and error nothing I did solved the issue. I did however plug it in my Mac and left it connected for about 30-40 min to charge for a bit and all of the sudden it recognizes the phone. So I just launched Android File Transfer and everything else became fluid after that. I have no explanation as to why it happened that way, but what I gathered from this is maybe you just have to let it sit for a minute while plugged in before the Mac recognizes it, after all they are opposing software. On a side note this is why I will always be an apple user, Iphones and the like never have this problem
-
I lost my iphone and my macbook pro does not show the icloud in system pref. how do i get icloud on my mac?
iCloud is only available in Lion, 10.7. You will have to upgrade to Lion in order to get into iCloud. If you transfered a .mac or .me address to iCloud through mobile me, or you have another device iCloud enabled, then you can log into the iCloud.com website.
-
My MacBook Pro does not recognize my iPhone 4 when I connect with USB
As the subject line says, when I connect my iPhone 4 to my MacBook Pro via the USB cable, it normaaaally opens iTunes and iPhoto automatically and syncs and imports photos from the phone. But, for some reason, that doesn't happen anymore... Now when I plug in my iPhone with the USB...nothing happens.
The USB still works as a power charger. I even tried a different newer iPhone USB cable from my friend's phone...same problem. I tried both USB ports.
I update my iPhone, my Mac, my itunes, my iphoto...everything. I reset everything at least a couple times. Still no luck!
I did a Disk Utility verify check...it found no problems, the volume 'appears to be ok.'
The iPhone still syncs with iTunes over WiFi, but unfortunately I can't back up my photos from my iPhone wirelessly (I don't have iCloud set up). I want to do it via USB.
Anyone out there with any advice on how to get my computer to recognize my iPhone?
THANK YOU!!!Ive been struggling with this problem all day, I was trying to upload my pics and videos from my iPhone 4s (version IOS-7) and my computer didn't seem to recognize my phone. Well I finally gave up. My iphone was plugged into my computer via USB, and my iPhoto would not open up automatically like it always had before I updated to IOS-7.
As a last ditch effort I happened to open up my software updates in the apple icon. Lo and behold, once I agreed to update my iTunes app on my mac OSX 10.6.8, it opened my iTunes and a window popped open asking me to click on 'trust this computer'. I did that, and suddenly my iPhoto opened up and filled up with all of my iphone 4s (version IOS 7.1.1) pictures and videos! I could not find an answer anywhere online. I guess the trick is to manually open up iTunes before you attempt to upload pictures/videos from your iPhone into iPhoto. -
MacBook pro does not recognize built in iSight cam even after restart/ reset
After years of using Sony hdr500 video cam, iMovie stopped recognizing it and then stopped recognizing the built in iSight cam as well. Now photo booth does not see it either. I have restarted the computer to reset SMC and that did not resolve the problem. I would appreciate any help offered. Thanks JJMANN
see http://support.apple.com/kb/HT1151 Check cables, connections, too many devices, etc., suggested there.
If your issue persists, try these steps:
Shut down the computer.
Disconnect all devices and cables except the keyboard and mouse cable(s).
Disconnect the computer from the power outlet and wait for 3 to 5 minutes.
Plug the computer back in and turn it on.
Reconnect the device(s) (one at a time if there is more than one) and test. Test with each port if you have more than one.
With all you have already done, if no USB devices are recognized or work on your Mac after you have also considered all the above, you likely have a hardware problem. Contact Apple or an Apple-Authorized Service Provider for service.
Message was edited by: EZ Jim
MBP 15" i7 (Early'11) OSX 10.7.3 13" MBP (Mid'09) 2.26GHz OSX 10.7.3 -
IPhoto '11 9.4.2 does not recognize new photos on iPhone 4 iOS 5.1.1
Today when i connected my iPhone 4 the iPhoto app does not recognize new photos from my photo library on my iPhone. Help! Thanx!
Today, I did try something, i changed to a different USB port and connecting cable from my iPhone to my iMac and with iPhoto already open the photos were visible and i was able to download my newest iPhone photos to my iMac. I did this due to the fact that i had this same connectivity problem with the external back up device i use and when i switched that device to a Firewire cable (from a USB) i can now do external backups. Not sure if the issue is with the cable or the USB port, but this worked for me!
-
i updated to ios 5.1.1 and added icloud services. the problem is now whenever i connect my iphone to my PC, itunes does not recognize my phone. i need it to but it just does not connect..
Try the standard fixes to rule out a software problem:
- Reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory defaults/new iPod.
If you still have the problem that points to a hardware problem. Yu can make an appointment at the the Genius Bar of an Apple store or try:
fix for Home button -
I cannot automatically synchronize my iphone to itunes, itunes apparently does not recognize it
I cannot automatically synchronize my iphone to itunes, itunes apparently does not recognize it
Hi alden49,
Thanks for visiting Apple Support Communities.
If you're having trouble syncing your iPhone with iTunes on Windows, the steps in this article can help:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Best Regards,
Jeremy -
when i plug in my iphone to the system, itunes does not recognize my iphone. i have tried all the troubleshooting part n there are no results yet. what should i do?
I have reset my iphone and made sure all updates have been done on my macbook pro and iphone. It was after updating my macpro that I plugged in my phone and went to itunes to backup phone and can't see the device anywhere! I have also done all the troubleshooting that apple.com recommended too...all except re-installing itunes!
-
When I connect my 3G iphone to my Macbook it does not connect or charge my phone
when I connect my 3G iphone to my Macbook it does not connect or charge my phone
See:
iOS: Device not recognized in iTunes for Windows
IOt is normal and expected for the iPod to appear in My Computer -
Greetings everybody,
I have run into a peculiar problem with the Safari browser on mobile platforms (IPad, IPod, IPhone) which I hope I can find a solution for in this community.
I just launched a new website where I sell products with certain variations, for example please view this link: http://www.finerribbon.com/aegean-single-face-satin-ribbon.html
On this particular product, the product variants are supposed to work in such a way where:
If you select the value "1/8" from the "Choose Ribbon Width" field
THEN
The only options active and available to choose from in the "Choose Roll Size" field should be: 500 Yds, 20 Yds & Sample Swatch
Now, if we browse to the above link in Safari using a desktop or a laptop, there are no problems at all, but if we browse to the above link using an IPhone or an Ipad, then we have a problem where all the options are available regardless of the values chosen, basically the above functonality does not work.
I was told that there an issue with Safari in Iphones and Ipads where it does not recognize option disabled="disabled" tag properly, is this true? Can anyone advise me if there is a solution to this problem? I would sincerely apperciate it.
Thank you very much for your time and help!Hi...
I have run into a peculiar problem with the Safari browser on mobile platforms (IPad, IPod, IPhone) which I hope I can find a solution for in this community.
Now, if we browse to the above link in Safari using a desktop or a laptop, there are no problems at all, but if we browse to the above link using an IPhone or an Ipad, then we have a problem
At the top of this window you'll see the following:
Apple Support Communities > Mac OS & System Software > Safari > Discussions
This the Safari forum for the Mac OS X.
Better that you post your topic here > Developer Forums: Apple Support Communities
I do see on my iPad what you are rreferring to. But you shoudl get the feedback you need in the developer forum. -
My MacBook Pro, does not start after pushing start button. The side bar starts and stops at half way.
Hy myneck,
Happy Holidays! The resource below may provide some steps to try if your MacBook Pro won't start.
Troubleshooting: My computer won't turn on - Apple Support
http://support.apple.com/en-us/TS1367
This article discusses what to do if your Mac won't turn on. To differentiate this from a display issue, be sure that when you press the power button:
You don't hear a startup chime.
You don't hear any fan or drive noise.
There is no video on your built-in or external display
If your computer has power but doesn't display any video, it may have one or more of these similar symptoms when you press the power button:
You may hear a startup chime.
You may hear fan or drive noise.
You may see a light from the Sleep LED (if your Mac has one).
Pressing the Caps Lock key on the keyboard causes it to light.
If any of these display-related conditions occur, see Troubleshooting: My computer has no video instead. Otherwise, continue with this article.
If your computer won't turn on, try each of these steps:
Verify you have a good connection from your Mac to the wall outlet by confirming the power cord and adapter if present are securely connected and plugged in. To check if the wall outlet is working, plug in a lamp or other electrical device.
If the wall outlet is working and you continue to have no power try another power cord or adapter if available. If it works you may need a replacement cord or adapter.
Note: See Apple Portables: Troubleshooting MagSafe adapters for further troubleshooting with MagSafe adapters.
Disconnect all accessories that are plugged in to the computer, such as a printer, hub, or other mobile device.
If your Mac supports user-installable memory, solid state drive, or hard drive, and you recently installed any of these, make sure they are installed correctly and are compatible with your computer. If possible, reinstall the original memory or drive into the computer to find out if the behavior persists afterwards.
MacBook Pro: How to remove or install memory
MacBook: How to remove or install memory
Mac Pro: How to remove or install memory
Mac mini: How to remove or install memory
iMac (27-inch, Late 2012): Installing or replacing memory
iMac: How to remove or install memory
Reset the SMC.
If you are still unable to start up your computer after trying each of these steps, visit an Apple Store or Apple Authorized Service Provider (AASP) for further diagnosis. If you plan to visit an Apple Retail Store, make a reservation at the Genius Bar using http://www.apple.com/retail/geniusbar/ (available in some countries only).Note: Diagnostic fees may apply for issues not covered under warranty or the AppleCare Protection Plan (APP).
I hope this information helps ....
- Judy -
Have a PowerBook G4 with software 10.4.11 and iTunes 9.2. Got a new iPhone 5 - and seems iTunes does not recognize it. What kind of software update(s) do I need?
None. An iPhone 5 requires Mac OS X 10.6.8 or newer to be synced from a Mac, which is above the maximum for a PowerBook G4(10.5.8.)
(79516) -
My macbook pro does not print through my PC to my EPSON RX 500 after loading OS X 10.7.4. It shows on the print queue "error" However, it will print if I directly connect my laptop to this printer via the USB connection. Any ideas?
It's all about setting up what ever version of windows you have running on your pc to share the printer. If you still get stuck post in a windows forum for help.
-
New Macbook Pro does not start up after updating...HELP!!!
Hi,
My new Macbook Pro does not start up after it got updated. The first time I used it, it was perfect. I updated it and restarted it when it told me to but it doesn't boot. It shows an apple and a spinning circle when it turns on but that's it.
Can somebody please help me?You should probably post your question in the MacBook Pro discussions:
http://discussions.apple.com/category.jspa?categoryID=190
Maybe you are looking for
-
How can I make a calender entry that makes a sound when it is its turn?
How can I make a calender entry that makes a sound when it is its turn?
-
Create a beep at specific intervals
Hello, I was only introduced to LabView today and must create a program that will produce a beep sound at (random) intervals and then repeat the cycle for a behavioral experiment I am conducting. In other words, I have to create something with the fo
-
Keyboard double typing letters
clicking letters like "i" o "d" on screen appear "id" or typing "s" it appears "lS". While clicking "Delete" button, it cancel the previous letter and substituite it with "p"!!!
-
Please read the subject. In Safari its playing OK. QTVR is jerky in Firefox, Lion.
-
Batch issues in V11.3 compare to V11.1
I am using same settings in V11.3 and V11.1, but in V11.3 pdfs are generating in different batch file compare to V11.1. Any one can help me.