After ios 7 installment why i cannot synchronize with google mail?, after ios 7 installment why i cannot synchronize with google mail?

i have istalled IOS 7 on I phone 5 and i cannot synchronize contacts with google mail
it only gives me the choice of outlook and windows contacts

So under Settings > Mail, Contacts, Calendars - you have a Gmail account setup and you do not have the option to turn on or off 'Contacts'?

Similar Messages

  • HT1414 My iPhone4 (iOS 6) does not sync with iTunes. The message displayed suggests to return the iPhone to factory settings (which I cannot do). This happened after the iPhone was upgraded to iOS6 and performed one sync. Any ideas?

    My iPhone4 (iOS 6) does not sync with iTunes. The message displayed suggests to return the iPhone to factory settings (which I cannot do). This happened after the iPhone was upgraded to iOS6 and performed one sync. Any ideas?

    Lilasil wrote:
    The message displayed suggests to return the iPhone to factory settings (which I cannot do).
    Why not?

  • Why my iPad 4 become very lag after upgrade to iOS 8.0.2 and not sensitive anymore when press the keyboard and programs it didn't respond when I type the word using the keyboard  fast it lag until I cannot locked or switch off the phone

    Why my iPad 4 become very lag after upgrade to iOS 8.0.2 and not sensitive anymore when press the keyboard and programs it didn't respond when I type the word using the keyboard  fast it lag until I cannot locked or switch off the phone

    Same issue here both with my iphone 5S as well as my iPad2. THe sync to my macbook air does not complete and it shows a large overcapacity level when connected, but once I disconnect there is plenty of room (4 GB) available, not a 20 GB overage. 

  • HT4623 why am i experiencing short battey life after installing ios 7?

    why am i experiencing short battey life with my IPad after installing ios 7 1 ?

    Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    iPhone: Hardware troubleshooting (Power/Battery section also applies to iPad)
    http://support.apple.com/kb/TS2802
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30
    iOS 7 Battery Life Draining Too Fast? It’s Easy to Fix
    http://osxdaily.com/2013/09/19/ios-7-battery-life-fix/
    Poor battery life after installing iOS 7.1? Try these simple tips
    http://www.zdnet.com/poor-battery-life-after-installing-ios-7-1-try-these-simple -tips-7000027348/
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    iPad: Charging the battery
    http://support.apple.com/kb/HT4060
    Best Practices for iPad Battery Charging
    http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/
    How to Save and Prolong the battery life of your new ipad
    https://discussions.apple.com/thread/4480944?tstart=0
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
    iPhone, iPod, Using the iPad Charger
    http://support.apple.com/kb/HT4327
    Install and use Battery Doctor HD
    http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
    To Extend a Device’s Battery Life, Get to Know It Better
    http://tinyurl.com/b67c7xz
    iPad Battery Replacement
    http://www.apple.com/batteries/replacements.html
    In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
     Cheers, Tom

  • Please could somebody help me I have an iMac which came with Tiger 10.4.10 installed I have lost my disks and I need to re-install after a hard drive failure. Where can I find this? I will upgrade to Snow Leopard after but I cannot go straight to SL

    Please could somebody help me I have an iMac which came with Tiger 10.4.10 installed I have lost my disks and I need to re-install after a hard drive failure. Where can I find this? I will upgrade to Snow Leopard after but I cannot go straight to SL

    You can go strait to SL, all you need is a retail SL DVD available from Apple for $20. The US online store has them at:
    http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard

  • Why I cannot use SIRI in Japanese after updated to ios 5.1?

    Why I cannot use SIRI in Japanese after updated to ios 5.1?
    I can see the language is there but it doesnt work

    Check your settings to make sure Siri is actually enabled.  Sometimes I find that Siri will disable during the updating process.  Oh, and it should be iOS 6.0 not 6.1.  6.1 doesn't exist...yet.

  • After upgrading to OX mountain lion my apps store doesn't open. App Store cannot verify a secure connection with the App Store. My internet connection is ok but i don't why this happening. What should i do?

    After upgrading to OX mountain lion my apps store doesn't open. App Store cannot verify a secure connection with the App Store. My internet connection is ok but i don't why this happening. What should i do?

    Hi Tahan007,
    Check these threads out:
    Cannot connect to the App Store since upgrading to Mountain Lion.
    Cannot connect to App Store since 10.8.1
    why is my app store sign in saying connection failed?
    Also if you're running any anti-virus SW, you might try temporarily disabling it

  • HT6030 I have 2011 iMac it came with os x 10.6.6 i just upgraded the hard drive and now i cannot install OS X 10.6.6 every time i start installing after selecting the language it come up with error " OS X can't be installed on this mac " please help

    I have 2011 iMac it came with os x 10.6.6 i just upgraded the hard drive and now i cannot install OS X 10.6.6 every time i start installing after selecting the language it come up with error " OS X can't be installed on this mac " please help

    Be sure to start your iMac using its original grey System Install DVD: Insert that disc and start your Mac while holding the d key. At the Mac OS X Utilities screen select Disk Utility and format the hard disk. Select "Mac OS X Extended (Journaled)".
    Then, install OS X.

  • My music player and whole programs cannot play and open anymore after contain with computer!!!!!why????

    My music player and whole programs cannot play and open anymore after contain with computer!!!!!why????

    No clue what you are trying to communicate or what this has to do with using an iPhone in a Enterprise (Corporate) environment.
    Try reposting in your native language.

  • HT4623 Why I cannot activate cellular data network after updating to iOS 6.0?

    Why I cannot activate cellular data network after updating to iOS 6.0?

    ok have a new Ipad a few weeks did this update and now poof nothing . have wifi but no Cellular Data seems its all ben wiped out, sat for over 1h came home after update and nothing but says i have full digicel  signal in the top courner have looked on net for help nothing has woked and digicel not open now here till monday.lets hope they sort this one soon. anyone else missing info in iPad: Tap Settings > Cellular Data ??????
    thanks

  • IPAD Why I cannot activate cellular data network after updating to iOS 6.0?

    Why I cannot activate cellular data network after updating to iOS 6.0? in fact all info in cellular has been wiped out ???? empty???  and why is it showing full signal in the top ???? any one got any help out there PLEASE      ????

    ok have a new Ipad a few weeks did this update and now poof nothing . have wifi but no Cellular Data seems its all ben wiped out, sat for over 1h came home after update and nothing but says i have full digicel  signal in the top courner have looked on net for help nothing has woked and digicel not open now here till monday.lets hope they sort this one soon. anyone else missing info in iPad: Tap Settings > Cellular Data ??????
    thanks

  • I cannot install FF Mobile into my LG P505R with Android 2.2...why????

    I cannot install FF Mobile into my LG P505R with Android 2.2...why????

    In general there are two classes of CPUs in Android devices ARMv6 and ARMv7. Firefox requires ARMv7 devices. If you don't see Firefox in the Android market then you are likely on an ARMv6 device.
    In the future we hope to provide a solution that allows Firefox to run on ARMv6.

  • Problem..with..spacebar..after..upgrading..to..10.4.10..and..install..X11

    (I..greatly..apologize..for..the..dottiness..of..this..message..but..I..cannot..
    use..the..spacebar..long..enough..to..get..this..message..out)
    Help!..This..is..why..I..avoid..doing..the..automatic..upgrades..most..of..the
    time,..but..this..time..I..had..software..that..said..it..needed..10.4.9..and..I
    was..at..10.4.7...It..turned..out..I..did..not..use..that..anyway..but..I..insta lled
    something..else..which..required..X11..(graphviz2.12..if..it..is..useful..info).
    Since..these..installations,..my..computer..will..now..loose..the..spacebar..and ..
    several..other..noncharacter..keys:..dash,quotes,and..open..brackets;..this..los s..
    occurs..after..a..variable..amount..of..time..from..restarting...Sometimes..I..c an
    revive..the..keys..by..quitting..and..restarting..an..application;..sometimes..
    after..quitting..and..restarting..all..applications;..and..sometimes..I..need..
    to..relaunch..the..finder.
    Has..anyone..heard..of..anything..like..this?..Could..it..be..due..to..the..
    upgrade..X11?..Or..is..it..more..likely..graphviz?..And..is..there..anyway..to
    undo..either..the..upgrade..or..X11?
    Thank..you..so..much,..and..I..apologize..again..for..all..the..dots.

    I..update..again..with..the..info..that..I..have..deleted..graphviz..and..now..
    not..even..restarting..fixes..the..problem.
    I..am..beginning..to..wonder..if..this..could..be..a..hardware..problem..that..
    is..only..coincident..with..the..upgrade/install?

  • Problem with Windows XP after a driver instalation

    Hi. I have a Lenovo SL400 with Windows XP. So, today I installed a few drivers from the Lenovo website because the volume and Lenovo Care keys and the bluetooth were not working since I changed to XP. After the installing process, I restarted my laptop and now just when its about to open the window to entet my password I get this blue screen for around 1 second and then it restarts itself, to do the same over and over again. The blue screen shows a four line message saying there is an error and some numbers. I have tried every option in the F8 menu and got nothing. Help me, please, I'm desperate :s

    my friend isten carefully:
    i have a g500,in which i tested a xp clean install(both x64 & x86 versions of xp*)(service pack 3 for the x86 version*).
    all the features work EXCEPT:when i install the wireless/bluetooth i start to receive the bsod(blue screen of death)
    i assume there is a VERY big issue(incompatibility) between the "high speed"(4.0 HS)adapter which is plugged in in this machine(and i also assume you have the same problem on your model).
    thing is........this adapter cannot work on windows xp,because:the intel chipset setup&the intel management engine interface setup have both tell your machine to work with specific "rules"(after the installation of these mentioned packages).
    that means,your system works fine,untill you try to install the bluetooth/wireless driver!
    after this installation,you receive this blue screen because the driver might be supossed/planned to work under windows xp,but the wifi/bluetooth adapter might NOT be working after the specific intel setup!..and that is a huge bug (in my opinion always).
    there is a workarround i think,but it demands that you actually must DOWNGRADE the motherboard setup(intel chipset drivers)or transform it to sth else,rather than what it is.
    the above has a result that the machine "sees" the usb ports as "generic"(...if i remember well)and then you can install the wifi/bluetooth set up normally.
    the whole problem stands on what i just mentioned:the wifi adapter is plugged under "internal usb" WHICH HAS TO WORK AS 3.0, BUT usb 3.0 IS NOT supported under win xp(or vista)!!!!!..so that's why the driver you(...and me)installed is the CORRECT ONE(according to the manufacturer)but THE MOTHERBOARD ON WHICH it is installed is NOT the suitable one(after the chipset setup installed of course!)
    Hope what i wrote helps everyone(plus Lenovo .....TO FIX IT!)

  • Why can't I open pdf's after install of adobe reader? Should I see it in system preferences?

    Why can't I open pdf's after install of adobe reader? Should I see it in system preferences?

    There are can be reasons PDFs cannot be opened. For example, some forms created with Lifecycle Designer cannot be opened.
    Are you sure the file is a PDF? Can you open it in Adobe Reader or Acrobat on a Mac or PC? Does it give an error message when you try to open it?

  • I installed my new iMac with my Macbook Pro 2008 backup and created a network with the iMac and now the Macbook Pro cannot get internet.

    I installed my new iMac with my Macbook Pro 2008 back up.  I created a iMac network with Airport extreme, but now my Macbook Pro cannot get internet.  any ideas on why or what to do about it.

    Hello 1BillyMac,
    It seems you have a network conflict that isn't allowing your MacBook Pro to connect to the internet. This may be caused by both computers sharing identical network settings. You may want to consider creating a new network location on your MacBook Pro to assign new network settings. The following article will instruct you on how to do that:
    OS X Yosemite: Add a network location
    A network location is a group of network settings
    A network location is a group of network settings for your various network services (Ethernet or Wi-Fi for example).
    If you often change network settings, you may find switching between locations quicker and easier than repeatedly modifying individual groups of settings. 
    For example, you might want to make a location for “home,” where you connect to the Internet with a telephone modem, and a location for “office,” where you connect to your company network and the Internet using Ethernet or AirPort. 
    Choose Apple menu > System Preferences, then click Network.
    Click the Location pop-up menu, choose Edit Locations, then click Add . 
    Enter a name for the location, then click Done.
    Enter settings for each network connection service you want to use in that location.
    After you create your locations, you can switch all of your network settings by clicking the Location pop-up menu and choosing a different location.
    Thank you for contributing to Apple Support Communities.
    Cheers,
    Bobby_D

Maybe you are looking for

  • Mac Book Pro - Rebooting and Kernel Panic

    Hi Everyone, I hope that you're all well. I've recently sold my iMac and purchased a Mac Book Pro Mid 2010 edition (i7, 8gig Ram, 500mb disk). It has Mountain Lion 10.8.4 installed. and I am having problems with the machine and I hope that you might

  • IWeb image source... a link?

    Is it possible on my iWeb-constructed webpage to have an image whose source is remotely linked (rather than a simple file on the local or .Mac server)? Note: I'm not refering to a hyperlink. For example, on my webpage I'd like to include the latest i

  • Submit data to an ABAP program from an offline form

    Hello Forms experts, the requirement goes like this: I have an internal table that will be passed to the form (via interface context) in the form the data will be changed by the user and the changes must be reflected in the internal table.- I have to

  • AudioSync/Sync Manager Er

    I have a Creative Nomad Jukebox Zen Xtra 30 gig that I've had since Christmas 2004, and it's awesome. However, AudioSync has stopped working. It gets to a certain point, then encounters an error and has to close. The error is: AppName: ctaudsyn.exe A

  • Vcast media manager issue

    I downloaded the Vcast media manager for my XP desktop and was able to get songs loaded. But now when I start the program it says there is an update but it fails to download it and then Vcast closes. I unloaded Vcast and downloaded the latest version