After iOS 8 upgrade, web site stopped working

I upgraded to iOS 8.0 (12A365) on my iphone 4S (Model: MD276LL/A) this evening.  The problem is ONLY with Safari on my 4s after I upgraded.  It worked fine before I upgraded, since I had tested it for someone else. It works fine with my computer with both Safari and FireFox.
I use a web site that has scrollable (multipage) frames. I cannot scroll in the framed sections of the website. Anyone else with this. www.GolfMission.Com is the site.
If you go to www.GolfMission.com, select "2014 Results & Std." from the left column, then select "2014 Net Averages" from the central framed area, you will get a multipage pdf document.  It should normally be scrollable.   It does not show scroll bars and only the first page is visible in iOS 8 Safart.
1) Does anyone else have this problem (several of us do)
2) How to I report it to Apple?
3) Is there a fix for my iPhone, or a recommended a change to the Website?
4) Can I get out of iOS 8 ????  I used to love apple.
Thanks in Advance.

stevejobsfan0123,
Thank You for your attention.
stevejobsfan0123 wrote:
1. Does it happen with all PDFs, or just from this one site?
2. Depends on your answer to the above.
3. It's up to the webmaster to change their website.
4. Downgrading is not supported.
I upgraded to iOS 8.0.2, this am, the problem remains the same as with 8.0.0.
The problem was NOT there before I upgraded to iOS 8.
1. Does it happen with all PDFs, or just from this one site?
     Answer:
     The same .pdf file is multiple page viewable on my iPhone when viewed outside of
          the Website context (http://www.golfwebsite.ws/14493/Documents/2014%20Net%20Average.pdf).
     No, it only happens when the pdf is in the scrollable area of the website, as far as my problem goes.  I think it is a "Frame" construct in the web site.
     It happens in MANY places on the web site (where there is a scrollable frame)
     The Scroll Bars and other functionality of the "Frame" do not appear as they should and the first page is just presented as a fixed image.
          Attempts to scroll move the whole page up and down.
     The same PDF works (roughly) when viewed outside of the context of the web page.
3. It's up to the webmaster to change their website.
     It worked fine on my iPhone before the upgrade to iOS 8.0, and it works fine with Safari on my MacBook, and with FireFox on my MacBook.
     This appears either to be a bug, or an upgrade that makes this website, and I'll presume many others obsolete only for iOS 8 Safari, but not for any other browser.
    Over one hundred people use this website daily and they are complaining about it.  All are iPhone users, and all started complaining yesterday.
     I'm not trying to be smart, but shouldn't the iOS 8 browser stay consistent with the MacBook Safari, and all the other browsers in this regard.
4. Downgrading is not supported.
     Unfortunately, I'm aware of this.
Can anyone add to this?  Thanks in advance.   The website and all are provided for testing in this thread.

Similar Messages

  • Apple iPad 3. BT email not working. Cannot send emails from btconnect SMTP after iOS upgrade. This is the only difference I am aware of. Can anyone help me please.

    BT email not working. Cannot send emails from btconnect SMTP after iOS upgrade. This is the only difference I am aware of. Apple iPad 3. Can anyone help me please.

    All resolved at last
    Deleted the SMTP setting
    Recreated the SMTP using the same settings
    Able to send emails now
    No logic - as usual - just a bug!

  • IPAD Mini Locked after iOS upgrade, tried reset on iPAD did not work, plugged in and device not appearing in iTUNEs for reset/restore

    PAD Mini Locked after iOS upgrade, tried reset on iPAD did not work, plugged in and device not appearing in iTUNEs for reset/restore.  Just get an Apple Logo then a flashing blue screen as if it is caught booting up.   This has happened twice before and iTunes restore fixed it.  But this time device not appearing in iTunes.
    Running iTunes for PC.  But as stated restore has worked before!  Any help greatly appreciated!!

    Place the device in DFU mode and let iTunes restore the device to factory condition.

  • After update to 11.2.202.228 mz USB 1.1 web cam stop working

    Hi,
    I have a camera from MediaTech company, it is written on it MT400 and serial number 2604050599. Before latest update it works, after install newest version of Flash Player it stop working. I tested it on http://testmycam.com as one of Adobe employee advices on forum but I have only black rectangle. On top left corner of this rectangle it is written Camera: USB PC Camera (SN9C 102) , FPS 10. I disabled Hardware acceleration but problem remains. 
    As I remember this camera is USB 1.1. Does new Flash Version support USB 1.1?
    I have checked on Device Manager on my Windows XP Home Edition 2002 Version with SP3 device driver version it is written:
    Manufacturer : Sonix
    Driver date: 2004-04-02 (I can't find newer drivers on web )
    Driver version: 4.6.6.1
    Is it bug or Flash Player stops supporting such devices?
    Regards

    I pressed Allow, before pressing Allow background was grey, after Allow
    it gets black. I see the name of this camera on list. I also try another
    camera from Logitech (I can't remember what name was it, but one of the
    newest) and everything works which suggest it is strictly related with
    this specific camera which I'm using.
    Regards
    W dniu 2012-03-31 08:39, Nodster pisze:
    >
          Re: After update to 11.2.202.228 mz USB 1.1 web cam stop working
    created by Nodster <http://forums.adobe.com/people/Nodster> in /Using
    Flash Player/ - View the full discussion
    <http://forums.adobe.com/message/4304094#4304094

  • Mobile web app stopped working on iPhone 6

    Hi All,
    I have a mobile web site that works really well on iPhone 5, iPhone 5s (both running iOS 8) and also on my iPad (iOS 8 as well).  However, the 'login' button does not work on the iPhone 6 (e.g. you click it and nothing happens).  That exact same website works on the other platforms. This doesn't make sense to me because they are all iOS 8?
    The website is written in AngularJS using BootStrap.  I know there are some updates to the webview on iOS but surely it is the same across all platforms? 
    On a side note, the website does work on an iPhone 6 emulator via Browser Stack. 
    Any help would be greatly appreciated.
    Thanks,
    Gaj

    I debugged this on the actual iPhone 6 that was having the problem and I saw that it was failing when the token returned by the server was being stored in session storage.
    I called up Apple support and spent a fair bit of time on the phone with them. The page was working on other iPhone 6 devices but not this one. After trying a few different settings and confirming it was working on Chrome, the fantastic Apple support person asked me to see if the page was set to 'private'.
    On the bottom right of the safari browser, you click an icon and you can set individual websites to 'private'. Unchecking this made the website work and I could store the token in session storage. It appears that my client accidentally set the website to 'private' and this was causing the issue.
    Hopefully this will save someone else some time with a similar issue.  Full credit to Apple support who spent over an hour to resolve this issue.

  • 3G icon in the status bar got disappear after ios upgrade 8.1

    3G icon in the status bar got disappear after ios upgrade 8.1

    Nginear48 wrote:
    Thanks for your quick response. I've tried everything you suggested and get only temporary fixes. Sometimes for a day or two, sometimes only until I use Safari for the first time. It's annoying and probably effects battery life between charges.
    You would think that it must have some effect on the battery, but oddly enough, the update to iOS 8 actually helped my battery life, in spite of all of these hinky little issues that are taking place. In my experience, the activity icon is not affecting the battery in a negative way.
    Another issue with IOS 8.1 that you may have seen is the loss of icon pictures on home pages. Again it seems to be Safari related, since app icons found in the App Store are not affected, only web based icons you personally put on home pages. I get what I call a test screen similar to what you used to get on old tv sets on every one of my personal icons.
    I know exactly what you mean. I got that as well. On a few of them, when I opened the websites using the generic test screen icons and then closed them, they changed back to the way that they should look. For the ones that did not change, I recreated the home screen shortcuts and deleted the generic looking ones - the test screen icons.
    And don't get me started on iBooks.
    For the very limited use that I make of the iBooks app, i haven't noticed any problems, but I rarely use the app. I don't read books on the iPad other than a few user guides and if they are pdf guides, they reside in more reliable and feature rich pdf apps on my iOS device.
    I wish that I had the fix for the spinning activity icon, but everything that I try, is temporary at best. IMO, this is the buggiest iOS update that I have seen, and I have been using iOS devices since iOS 3 on my first iPad. I realize that there are plenty of people that are not experiencing issues, but I have seen a number of weird things that I wish I could fix. None of my problems are major, but they are annoying.

  • Flash player download web site not working

    After uninstalling flash player, I can't get the web site to reinstall it. I go to the web site click the agree and install now and gos to the next page but nothing pops up like it said it should.
    http://get.adobe.com/flashplayer/thankyou/activex/?installer=Flash_Player_10_for_Windows_I nternet_Explorer&i=McAfee_Security_Scan_Plus&d=Google_Toolbar_6.3

    Hi eidnolb,
    My OS is windows 7 Ultimate. There no Service packs listed Microsoft don't have one for it yet. My brower is Internet explorer 8 version: 8.0.7600.16385. My firewall is not causeing problems and the popup blocker didn't even activate.
    Date: Wed, 14 Apr 2010 10:01:33 -0600
    Subject: Flash Player flash player download web site not working
    Hi newcomer76, Please post back your operating system and if any applicable Service Packs, any and all browsers that you use with the versions.
    With that information, I'll be able to give you instructions and the links you need.
    Thanks,
    eidnolb
    >

  • No valid license found after IOS upgrade on C3750x switch

    HI,
    Two switches below are working fine as a stack with IOS c3750e-universalk9-mz.122-55.SE5.bin & ipbase license.
    Switch#1 (Master, WS-C3750X-24P-S)
    Switch#2 (Member, WS-C3750X-24P-S)
    After IOS Upgrade to c3750e-universalk9-mz.150-2.SE7.bin, The stack was broken. Switch#2 didn’t recognise valid ipbase license with new IOS and came up with lanbase license instead. Therefore stack cannot be composed due to license mismatch between Switch#1 (ipbase) and switch#2(lanbase).
    I’m wondering why Switch#2 didn’t recognise ipbase license with new IOS even though IPASE is running well with previous IOS.
    Here is excerpt from “show version” with 15.x image on Switch#2.
    License Level: lanbase
    License Type: Default. No valid license found.
    Next reload license Level: lanbase
    Here is excerpt from “show version” with 12.x image on Switch Stack.
    License Level: ipbase
    License Type: Permanent
    Next reload license Level: ipbase
    Thanks
    Jeong

    Thanks guys,
    I have fixed the issue by configuring  'license boot level ipbase' on the member switch#2. The switch recognised IPBASE license well and joined the stack successfully.

  • Why does the pop up window for a printable coupon only appears briefly (in the upper left corner) and then disappear, even after putting the web site into the Tools,Options,Content,Pop-Up Exceptions?

    I am at http://www.closys.com/samples_&_coupons/get_a_coupon.html and the pop up window for a printable coupon only appears briefly (in the upper left corner) and then disappears, even after putting the web site into the Tools,Options,Content,Pop-Up Exceptions. What gives and how can it be fixed. I have a time limit.
    Thanks for your solution.
    Dan

    Mha007:
    Sorry, but I have already tried this too and verified that the web addresses are listed as Allow, rather than Block. After restart there was no difference, I still get the disappearing pop-up windows.
    Thanks for offering suggestions though.
    Have you heard of any issues like this occurring based on the number of tabs that are open in Firefox?
    Just a thought, even though I have not heard of this as an issue before. I keep about 80 tabs open regularly, because of research that I am always conducting (I am a blogger, a writer/author, a technophile-especially Green Tech.,), email, work, etc.?
    I do have a check in the box for Firefox to let me know if the number of open tabs is causing slow down or other issues.
    Thanks for any help.

  • Hp smart web printing stopped working in ie 8...is there a fix?

    using Hp G71 lap top...window 7 64-bit  HP smart web printing stopped working
    I use IE 8 ...I tried IE9 and the Updated HPSWP and it failed as well
    why is your software no longer functional.

    same problem here. worked for a while on two of my computers, and then stopped working. windows 7 64 bit ie 9.0.12

  • A few seconds after start the GDM mouse stops working

    After today's update I have the following problem: a few seconds after start the GDM mouse stops working. XDM doesn't work.
    Edited: Mouse works. Only pointer does not move.
    lscpi says:
    00:02.0 VGA compatible controller: Intel Corporation 82946GZ/GL Integrated Graphics Controller (rev 02)
    gdm says:
    usb 2-2: new low speed USB device using uhci_hcd and address 4
    input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input6
    generic-usb 0003:04B3:310C.0003: input,hidraw1: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.0-2/input0
    [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
    [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -11 (awaiting 1071 at 650, next 1076)
    (this line is repeated several times:)
    [drm:i915_do_wait_request] *ERROR* something (likely vbetool) disabled interrupts, re-enabling
    [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
    [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -11 (awaiting 1079 at 650, next 1080)
    [drm:i915_reset] *ERROR* GPU hanging too fast, declaring wedged!
    [drm:i915_reset] *ERROR* Failed to reset chip.
    /var/log/Xorg.0.log says:
    [ 23.129]
    This is a pre-release version of the X server from The X.Org Foundation.
    It is not supported in any way.
    Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
    Select the "xorg" product for bugs you find in this release.
    Before reporting bugs in pre-release versions please check the
    latest version in the X.Org Foundation git repository.
    See http://wiki.x.org/wiki/GitPage for git access instructions.
    [ 23.129]
    X.Org X Server 1.9.3.901 (1.9.4 RC 1)
    Release Date: 2011-01-07
    [ 23.129] X Protocol Version 11, Revision 0
    [ 23.129] Build Operating System: Linux 2.6.36-ARCH i686
    [ 23.129] Current Operating System: Linux mariuszch 2.6.37-ARCH #1 SMP PREEMPT Sat Jan 29 19:40:04 UTC 2011 i686
    [ 23.129] Kernel command line: root=/dev/disk/by-uuid/3e82e71b-7de4-406d-8da9-8101fe4a713f ro i915.modeset=1
    [ 23.129] Build Date: 08 January 2011 11:27:31PM
    [ 23.129]
    [ 23.130] Current version of pixman: 0.20.2
    [ 23.130] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 23.130] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 23.131] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jan 31 09:24:08 2011
    [ 23.163] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 23.206] (==) No Layout section. Using the first Screen section.
    [ 23.206] (==) No screen section available. Using defaults.
    [ 23.206] (**) |-->Screen "Default Screen Section" (0)
    [ 23.206] (**) | |-->Monitor "<default monitor>"
    [ 23.206] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 23.206] (==) Automatically adding devices
    [ 23.206] (==) Automatically enabling devices
    [ 23.260] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 23.260] Entry deleted from font path.
    [ 23.295] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    [ 23.295] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 23.295] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 23.295] (II) Loader magic: 0x81f3160
    [ 23.295] (II) Module ABI versions:
    [ 23.295] X.Org ANSI C Emulation: 0.4
    [ 23.295] X.Org Video Driver: 8.0
    [ 23.295] X.Org XInput driver : 11.0
    [ 23.295] X.Org Server Extension : 4.0
    [ 23.296] (--) PCI:*(0:0:2:0) 8086:2972:17aa:1015 rev 2, Mem @ 0xd0000000/1048576, 0xc0000000/268435456, I/O @ 0x000018c0/8
    [ 23.296] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 23.296] (II) LoadModule: "extmod"
    [ 23.306] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 23.314] (II) Module extmod: vendor="X.Org Foundation"
    [ 23.314] compiled for 1.9.3.901, module version = 1.0.0
    [ 23.314] Module class: X.Org Server Extension
    [ 23.314] ABI class: X.Org Server Extension, version 4.0
    [ 23.314] (II) Loading extension MIT-SCREEN-SAVER
    [ 23.314] (II) Loading extension XFree86-VidModeExtension
    [ 23.314] (II) Loading extension XFree86-DGA
    [ 23.314] (II) Loading extension DPMS
    [ 23.314] (II) Loading extension XVideo
    [ 23.314] (II) Loading extension XVideo-MotionCompensation
    [ 23.314] (II) Loading extension X-Resource
    [ 23.314] (II) LoadModule: "dbe"
    [ 23.314] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 23.320] (II) Module dbe: vendor="X.Org Foundation"
    [ 23.320] compiled for 1.9.3.901, module version = 1.0.0
    [ 23.320] Module class: X.Org Server Extension
    [ 23.320] ABI class: X.Org Server Extension, version 4.0
    [ 23.320] (II) Loading extension DOUBLE-BUFFER
    [ 23.320] (II) LoadModule: "glx"
    [ 23.320] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 23.337] (II) Module glx: vendor="X.Org Foundation"
    [ 23.337] compiled for 1.9.3.901, module version = 1.0.0
    [ 23.337] ABI class: X.Org Server Extension, version 4.0
    [ 23.337] (==) AIGLX enabled
    [ 23.337] (II) Loading extension GLX
    [ 23.337] (II) LoadModule: "record"
    [ 23.338] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 23.338] (II) Module record: vendor="X.Org Foundation"
    [ 23.338] compiled for 1.9.3.901, module version = 1.13.0
    [ 23.338] Module class: X.Org Server Extension
    [ 23.338] ABI class: X.Org Server Extension, version 4.0
    [ 23.339] (II) Loading extension RECORD
    [ 23.339] (II) LoadModule: "dri"
    [ 23.339] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 23.347] (II) Module dri: vendor="X.Org Foundation"
    [ 23.347] compiled for 1.9.3.901, module version = 1.0.0
    [ 23.347] ABI class: X.Org Server Extension, version 4.0
    [ 23.347] (II) Loading extension XFree86-DRI
    [ 23.347] (II) LoadModule: "dri2"
    [ 23.348] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 23.351] (II) Module dri2: vendor="X.Org Foundation"
    [ 23.351] compiled for 1.9.3.901, module version = 1.2.0
    [ 23.351] ABI class: X.Org Server Extension, version 4.0
    [ 23.351] (II) Loading extension DRI2
    [ 23.351] (==) Matched intel as autoconfigured driver 0
    [ 23.351] (==) Matched vesa as autoconfigured driver 1
    [ 23.351] (==) Matched fbdev as autoconfigured driver 2
    [ 23.351] (==) Assigned the driver to the xf86ConfigLayout
    [ 23.351] (II) LoadModule: "intel"
    [ 23.352] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [ 23.408] (II) Module intel: vendor="X.Org Foundation"
    [ 23.408] compiled for 1.9.3, module version = 2.14.0
    [ 23.408] Module class: X.Org Video Driver
    [ 23.408] ABI class: X.Org Video Driver, version 8.0
    [ 23.408] (II) LoadModule: "vesa"
    [ 23.408] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
    [ 23.414] (II) Module vesa: vendor="X.Org Foundation"
    [ 23.414] compiled for 1.9.0, module version = 2.3.0
    [ 23.414] Module class: X.Org Video Driver
    [ 23.414] ABI class: X.Org Video Driver, version 8.0
    [ 23.414] (II) LoadModule: "fbdev"
    [ 23.425] (WW) Warning, couldn't open module fbdev
    [ 23.425] (II) UnloadModule: "fbdev"
    [ 23.425] (EE) Failed to load module "fbdev" (module does not exist, 0)
    [ 23.426] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
    965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
    4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
    Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge,
    Sandybridge, Sandybridge
    [ 23.426] (II) VESA: driver for VESA chipsets: vesa
    [ 23.426] (++) using VT number 7
    [ 23.435] (WW) Falling back to old probe method for vesa
    [ 23.435] drmOpenDevice: node name is /dev/dri/card0
    [ 23.435] drmOpenDevice: open result is 8, (OK)
    [ 23.435] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    [ 23.435] drmOpenDevice: node name is /dev/dri/card0
    [ 23.435] drmOpenDevice: open result is 8, (OK)
    [ 23.435] drmOpenByBusid: drmOpenMinor returns 8
    [ 23.435] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    [ 23.435] (II) intel(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 23.435] (==) intel(0): Depth 24, (--) framebuffer bpp 32
    [ 23.435] (==) intel(0): RGB weight 888
    [ 23.435] (==) intel(0): Default visual is TrueColor
    [ 23.436] (II) intel(0): Integrated Graphics Chipset: Intel(R) 946GZ
    [ 23.436] (--) intel(0): Chipset: "946GZ"
    [ 23.436] (**) intel(0): Tiling enabled
    [ 23.436] (**) intel(0): SwapBuffers wait enabled
    [ 23.436] (==) intel(0): video overlay key set to 0x101fe
    [ 23.520] (II) intel(0): Output VGA1 has no monitor section
    [ 23.587] (II) intel(0): EDID for output VGA1
    [ 23.587] (II) intel(0): Manufacturer: SAM Model: 594 Serial#: 1297691186
    [ 23.587] (II) intel(0): Year: 2010 Week: 1
    [ 23.587] (II) intel(0): EDID Version: 1.3
    [ 23.587] (II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
    [ 23.587] (II) intel(0): Sync: Separate Composite SyncOnGreen
    [ 23.587] (II) intel(0): Max Image Size [cm]: horiz.: 44 vert.: 30
    [ 23.587] (II) intel(0): Gamma: 2.20
    [ 23.587] (II) intel(0): DPMS capabilities: Off; RGB/Color Display
    [ 23.587] (II) intel(0): First detailed timing is preferred mode
    [ 23.587] (II) intel(0): redX: 0.646 redY: 0.339 greenX: 0.290 greenY: 0.603
    [ 23.587] (II) intel(0): blueX: 0.145 blueY: 0.070 whiteX: 0.312 whiteY: 0.329
    [ 23.587] (II) intel(0): Supported established timings:
    [ 23.587] (II) intel(0): 720x400@70Hz
    [ 23.587] (II) intel(0): 640x480@60Hz
    [ 23.587] (II) intel(0): 640x480@67Hz
    [ 23.587] (II) intel(0): 640x480@72Hz
    [ 23.587] (II) intel(0): 640x480@75Hz
    [ 23.587] (II) intel(0): 800x600@56Hz
    [ 23.587] (II) intel(0): 800x600@60Hz
    [ 23.587] (II) intel(0): 800x600@72Hz
    [ 23.587] (II) intel(0): 800x600@75Hz
    [ 23.587] (II) intel(0): 832x624@75Hz
    [ 23.587] (II) intel(0): 1024x768@60Hz
    [ 23.587] (II) intel(0): 1024x768@70Hz
    [ 23.587] (II) intel(0): 1024x768@75Hz
    [ 23.587] (II) intel(0): 1280x1024@75Hz
    [ 23.587] (II) intel(0): 1152x864@75Hz
    [ 23.587] (II) intel(0): Manufacturer's mask: 0
    [ 23.587] (II) intel(0): Supported standard timings:
    [ 23.587] (II) intel(0): #0: hsize: 1680 vsize 1050 refresh: 60 vid: 179
    [ 23.587] (II) intel(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 23.587] (II) intel(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
    [ 23.587] (II) intel(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
    [ 23.587] (II) intel(0): #4: hsize: 1280 vsize 800 refresh: 60 vid: 129
    [ 23.587] (II) intel(0): #5: hsize: 1440 vsize 900 refresh: 60 vid: 149
    [ 23.587] (II) intel(0): #6: hsize: 1440 vsize 900 refresh: 75 vid: 3989
    [ 23.588] (II) intel(0): Supported detailed timing:
    [ 23.588] (II) intel(0): clock: 119.0 MHz Image Size: 459 x 296 mm
    [ 23.588] (II) intel(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 1840 h_border: 0
    [ 23.588] (II) intel(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1080 v_border: 0
    [ 23.588] (II) intel(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 145 MHz
    [ 23.588] (II) intel(0): Monitor name: SyncMaster
    [ 23.588] (II) intel(0): Serial No: HMFZ102588
    [ 23.588] (II) intel(0): EDID (in hex):
    [ 23.588] (II) intel(0): 00ffffffffffff004c2d94053232594d
    [ 23.588] (II) intel(0): 011401030e2c1e782ab501a5564a9a25
    [ 23.588] (II) intel(0): 125054bfef80b30081808140714f8100
    [ 23.588] (II) intel(0): 9500950f01017c2e90a0601a1e403020
    [ 23.588] (II) intel(0): 3600cb281100001a000000fd00384b1e
    [ 23.588] (II) intel(0): 510e000a202020202020000000fc0053
    [ 23.588] (II) intel(0): 796e634d61737465720a2020000000ff
    [ 23.588] (II) intel(0): 00484d465a3130323538380a20200026
    [ 23.588] (II) intel(0): EDID vendor "SAM", prod id 1428
    [ 23.613] (II) intel(0): Using EDID range info for horizontal sync
    [ 23.613] (II) intel(0): Using EDID range info for vertical refresh
    [ 23.613] (II) intel(0): Printing DDC gathered Modelines:
    [ 23.613] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
    [ 23.613] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    [ 23.613] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    [ 23.613] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
    [ 23.613] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
    [ 23.613] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
    [ 23.613] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    [ 23.613] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
    [ 23.613] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    [ 23.613] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
    [ 23.613] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
    [ 23.613] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    [ 23.613] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
    [ 23.613] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
    [ 23.613] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
    [ 23.613] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
    [ 23.613] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
    [ 23.613] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    [ 23.613] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
    [ 23.613] (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
    [ 23.613] (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
    [ 23.613] (II) intel(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
    [ 23.614] (II) intel(0): Printing probed modes for output VGA1
    [ 23.614] (II) intel(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
    [ 23.614] (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    [ 23.614] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    [ 23.614] (II) intel(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
    [ 23.614] (II) intel(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
    [ 23.614] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
    [ 23.614] (II) intel(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 +hsync -vsync (49.7 kHz)
    [ 23.614] (II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
    [ 23.614] (II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
    [ 23.614] (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
    [ 23.614] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    [ 23.614] (II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
    [ 23.614] (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
    [ 23.614] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
    [ 23.614] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    [ 23.614] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    [ 23.614] (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
    [ 23.614] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
    [ 23.614] (II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
    [ 23.614] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    [ 23.614] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
    [ 23.614] (II) intel(0): Output VGA1 connected
    [ 23.614] (II) intel(0): Using exact sizes for initial modes
    [ 23.614] (II) intel(0): Output VGA1 using initial mode 1680x1050
    [ 23.614] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 23.614] (II) intel(0): Kernel page flipping support detected, enabling
    [ 23.614] (**) intel(0): Display dimensions: (440, 300) mm
    [ 23.614] (**) intel(0): DPI set to (96, 88)
    [ 23.614] (II) Loading sub module "fb"
    [ 23.614] (II) LoadModule: "fb"
    [ 23.615] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 23.628] (II) Module fb: vendor="X.Org Foundation"
    [ 23.629] compiled for 1.9.3.901, module version = 1.0.0
    [ 23.629] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 23.629] (II) UnloadModule: "vesa"
    [ 23.629] (II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so
    [ 23.629] (==) Depth 24 pixmap format is 32 bpp
    [ 23.629] (==) intel(0): VideoRam: 262144 KB
    [ 23.629] (II) intel(0): [DRI2] Setup complete
    [ 23.629] (II) intel(0): [DRI2] DRI driver: i915
    [ 23.629] (II) intel(0): Allocated new frame buffer 1728x1050 stride 7168, tiled
    [ 23.656] (II) UXA(0): Driver registered support for the following operations:
    [ 23.656] (II) solid
    [ 23.656] (II) copy
    [ 23.656] (II) composite (RENDER acceleration)
    [ 23.656] (II) put_image
    [ 23.656] (II) get_image
    [ 23.656] (==) intel(0): Backing store disabled
    [ 23.656] (==) intel(0): Silken mouse enabled
    [ 23.658] (II) intel(0): Initializing HW Cursor
    [ 23.673] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 23.673] (==) intel(0): DPMS enabled
    [ 23.673] (==) intel(0): Intel XvMC decoder disabled
    [ 23.673] (II) intel(0): Set up textured video
    [ 23.673] (II) intel(0): Set up overlay video
    [ 23.673] (II) intel(0): direct rendering: DRI2 Enabled
    [ 23.673] (==) intel(0): hotplug detection: "enabled"
    [ 23.674] (--) RandR disabled
    [ 23.674] (II) Initializing built-in extension Generic Event Extension
    [ 23.674] (II) Initializing built-in extension SHAPE
    [ 23.674] (II) Initializing built-in extension MIT-SHM
    [ 23.674] (II) Initializing built-in extension XInputExtension
    [ 23.674] (II) Initializing built-in extension XTEST
    [ 23.674] (II) Initializing built-in extension BIG-REQUESTS
    [ 23.674] (II) Initializing built-in extension SYNC
    [ 23.674] (II) Initializing built-in extension XKEYBOARD
    [ 23.674] (II) Initializing built-in extension XC-MISC
    [ 23.674] (II) Initializing built-in extension SECURITY
    [ 23.674] (II) Initializing built-in extension XINERAMA
    [ 23.674] (II) Initializing built-in extension XFIXES
    [ 23.674] (II) Initializing built-in extension RENDER
    [ 23.674] (II) Initializing built-in extension RANDR
    [ 23.674] (II) Initializing built-in extension COMPOSITE
    [ 23.674] (II) Initializing built-in extension DAMAGE
    [ 23.754] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [ 23.754] (II) AIGLX: enabled GLX_INTEL_swap_event
    [ 23.754] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [ 23.754] (II) AIGLX: enabled GLX_SGI_make_current_read
    [ 23.754] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [ 23.754] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
    [ 23.754] (II) GLX: Initialized DRI2 GL provider for screen 0
    [ 23.755] (II) intel(0): Setting screen physical size to 444 x 277
    [ 24.316] (II) config/udev: Adding input device Power Button (/dev/input/event1)
    [ 24.316] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 24.316] (II) LoadModule: "evdev"
    [ 24.317] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 24.334] (II) Module evdev: vendor="X.Org Foundation"
    [ 24.334] compiled for 1.9.0, module version = 2.5.0
    [ 24.334] Module class: X.Org XInput Driver
    [ 24.334] ABI class: X.Org XInput driver, version 11.0
    [ 24.334] (**) Power Button: always reports core events
    [ 24.334] (**) Power Button: Device: "/dev/input/event1"
    [ 24.340] (--) Power Button: Found keys
    [ 24.340] (II) Power Button: Configuring as keyboard
    [ 24.340] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    [ 24.340] (**) Option "xkb_rules" "evdev"
    [ 24.340] (**) Option "xkb_model" "evdev"
    [ 24.340] (**) Option "xkb_layout" "us"
    [ 24.380] (II) config/udev: Adding input device Power Button (/dev/input/event0)
    [ 24.380] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 24.380] (**) Power Button: always reports core events
    [ 24.380] (**) Power Button: Device: "/dev/input/event0"
    [ 24.386] (--) Power Button: Found keys
    [ 24.386] (II) Power Button: Configuring as keyboard
    [ 24.386] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    [ 24.386] (**) Option "xkb_rules" "evdev"
    [ 24.386] (**) Option "xkb_model" "evdev"
    [ 24.386] (**) Option "xkb_layout" "us"
    [ 24.394] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event3)
    [ 24.394] (II) No input driver/identifier specified (ignoring)
    [ 24.398] (II) config/udev: Adding input device CHICONY USB NetVista Full Width Keyboard (/dev/input/event4)
    [ 24.398] (**) CHICONY USB NetVista Full Width Keyboard: Applying InputClass "evdev keyboard catchall"
    [ 24.398] (**) CHICONY USB NetVista Full Width Keyboard: always reports core events
    [ 24.398] (**) CHICONY USB NetVista Full Width Keyboard: Device: "/dev/input/event4"
    [ 24.403] (--) CHICONY USB NetVista Full Width Keyboard: Found keys
    [ 24.403] (II) CHICONY USB NetVista Full Width Keyboard: Configuring as keyboard
    [ 24.403] (II) XINPUT: Adding extended input device "CHICONY USB NetVista Full Width Keyboard" (type: KEYBOARD)
    [ 24.403] (**) Option "xkb_rules" "evdev"
    [ 24.403] (**) Option "xkb_model" "evdev"
    [ 24.403] (**) Option "xkb_layout" "us"
    [ 24.411] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
    [ 24.411] (II) No input driver/identifier specified (ignoring)
    [ 27.181] (II) intel(0): EDID vendor "SAM", prod id 1428
    [ 27.182] (II) intel(0): Using hsync ranges from config file
    [ 27.182] (II) intel(0): Using vrefresh ranges from config file
    [ 27.182] (II) intel(0): Printing DDC gathered Modelines:
    [ 27.182] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
    [ 27.182] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    [ 27.182] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    [ 27.182] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
    [ 27.182] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
    [ 27.182] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
    [ 27.182] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    [ 27.182] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
    [ 27.182] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    [ 27.182] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
    [ 27.182] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
    [ 27.182] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    [ 27.182] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
    [ 27.182] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
    [ 27.182] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
    [ 27.182] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
    [ 27.182] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
    [ 27.182] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    [ 27.182] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
    [ 27.182] (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
    [ 27.182] (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
    [ 27.182] (II) intel(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
    [ 27.256] (II) intel(0): EDID vendor "SAM", prod id 1428
    [ 27.256] (II) intel(0): Using hsync ranges from config file
    [ 27.256] (II) intel(0): Using vrefresh ranges from config file
    [ 27.256] (II) intel(0): Printing DDC gathered Modelines:
    [ 27.256] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
    [ 27.256] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    [ 27.256] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    [ 27.256] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
    [ 27.256] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
    [ 27.256] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
    [ 27.256] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    [ 27.256] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
    [ 27.256] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    [ 27.256] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
    [ 27.256] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
    [ 27.256] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    [ 27.256] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
    [ 27.256] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
    [ 27.256] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
    [ 27.256] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
    [ 27.256] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
    [ 27.256] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    [ 27.256] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
    [ 27.256] (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
    [ 27.256] (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
    [ 27.256] (II) intel(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
    [ 27.363] (II) intel(0): EDID vendor "SAM", prod id 1428
    [ 27.363] (II) intel(0): Using hsync ranges from config file
    [ 27.364] (II) intel(0): Using vrefresh ranges from config file
    [ 27.364] (II) intel(0): Printing DDC gathered Modelines:
    [ 27.364] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
    [ 27.364] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    [ 27.364] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    [ 27.364] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
    [ 27.364] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
    [ 27.364] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
    [ 27.364] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    [ 27.364] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
    [ 27.364] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    [ 27.364] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
    [ 27.364] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
    [ 27.364] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    [ 27.364] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
    [ 27.364] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
    [ 27.364] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
    [ 27.364] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
    [ 27.364] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
    [ 27.364] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    [ 27.364] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
    [ 27.364] (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
    [ 27.364] (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
    [ 27.364] (II) intel(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
    [ 27.433] (II) intel(0): EDID vendor "SAM", prod id 1428
    [ 27.433] (II) intel(0): Using hsync ranges from config file
    [ 27.433] (II) intel(0): Using vrefresh ranges from config file
    [ 27.433] (II) intel(0): Printing DDC gathered Modelines:
    [ 27.433] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
    [ 27.434] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    [ 27.434] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    [ 27.434] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
    [ 27.434] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
    [ 27.434] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
    [ 27.434] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    [ 27.434] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
    [ 27.434] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    [ 27.434] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
    [ 27.434] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
    [ 27.434] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    [ 27.434] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
    [ 27.434] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
    [ 27.434] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
    [ 27.434] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
    [ 27.434] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
    [ 27.434] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    [ 27.434] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
    [ 27.434] (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
    [ 27.434] (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
    [ 27.434] (II) intel(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
    [ 33.144] (EE) intel(0): Detected a hung GPU, disabling acceleration.
    [ 33.145] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 33.146] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 33.162] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 33.162] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 33.166] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 33.166] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 33.284] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 33.287] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 33.294] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 33.402] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 33.402] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 33.723] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 33.724] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 33.725] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 33.725] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 33.732] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 34.493] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 34.893] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 35.695] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 36.096] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 36.896] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 37.298] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 38.948] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 38.949] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 39.057] (EE) intel(0): failed to set cursor: Input/output error
    [ 39.057] (EE) intel(0): failed to set cursor: Input/output error
    [ 39.064] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 39.064] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 39.255] (EE) intel(0): failed to set cursor: Input/output error
    [ 39.255] (EE) intel(0): failed to set cursor: Input/output error
    [ 39.329] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 39.337] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 39.341] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 42.522] (EE) intel(0): failed to set cursor: Input/output error
    [ 42.522] (EE) intel(0): failed to set cursor: Input/output error
    [ 42.531] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 42.695] (EE) intel(0): failed to set cursor: Input/output error
    [ 42.695] (EE) intel(0): failed to set cursor: Input/output error
    [ 45.970] (EE) intel(0): failed to set cursor: Input/output error
    [ 45.970] (EE) intel(0): failed to set cursor: Input/output error
    [ 46.957] (EE) intel(0): failed to set cursor: Input/output error
    [ 46.957] (EE) intel(0): failed to set cursor: Input/output error
    [ 53.971] (EE) intel(0): failed to set cursor: Input/output error
    [ 53.971] (EE) intel(0): failed to set cursor: Input/output error
    [ 54.206] (EE) intel(0): failed to set cursor: Input/output error
    [ 54.206] (EE) intel(0): failed to set cursor: Input/output error
    [ 54.804] (EE) intel(0): failed to set cursor: Input/output error
    [ 54.804] (EE) intel(0): failed to set cursor: Input/output error
    [ 72.861] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event5)
    [ 72.861] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
    [ 72.861] (**) USB Optical Mouse: always reports core events
    [ 72.861] (**) USB Optical Mouse: Device: "/dev/input/event5"
    [ 72.866] (--) USB Optical Mouse: Found 3 mouse buttons
    [ 72.866] (--) USB Optical Mouse: Found scroll wheel(s)
    [ 72.866] (--) USB Optical Mouse: Found relative axes
    [ 72.866] (--) USB Optical Mouse: Found x and y relative axes
    [ 72.866] (II) USB Optical Mouse: Configuring as mouse
    [ 72.866] (**) USB Optical Mouse: YAxisMapping: buttons 4 and 5
    [ 72.866] (**) USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 72.867] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE)
    [ 72.867] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1
    [ 72.867] (**) USB Optical Mouse: (accel) acceleration profile 0
    [ 72.867] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
    [ 72.867] (**) USB Optical Mouse: (accel) acceleration threshold: 4
    [ 72.867] (II) USB Optical Mouse: initialized for relative axes.
    [ 72.868] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse0)
    [ 72.868] (II) No input driver/identifier specified (ignoring)
    [ 84.484] (EE) intel(0): failed to set cursor: Input/output error
    [ 84.484] (EE) intel(0): failed to set cursor: Input/output error
    [ 136.555] (EE) intel(0): failed to set cursor: Input/output error
    [ 136.555] (EE) intel(0): failed to set cursor: Input/output error
    [ 163.561] (EE) intel(0): failed to set cursor: Input/output error
    [ 163.561] (EE) intel(0): failed to set cursor: Input/output error
    [ 176.751] (EE) intel(0): failed to set cursor: Input/output error
    [ 176.752] (EE) intel(0): failed to set cursor: Input/output error
    [ 179.565] (EE) intel(0): failed to set cursor: Input/output error
    [ 179.565] (EE) intel(0): failed to set cursor: Input/output error
    [ 179.613] (EE) intel(0): failed to set cursor: Input/output error
    [ 179.613] (EE) intel(0): failed to set cursor: Input/output error
    [ 190.939] (EE) intel(0): failed to set cursor: Input/output error
    [ 190.939] (EE) intel(0): failed to set cursor: Input/output error
    [ 196.719] (EE) intel(0): failed to set cursor: Input/output error
    [ 196.719] (EE) intel(0): failed to set cursor: Input/output error
    [ 197.007] (EE) intel(0): failed to set cursor: Input/output error
    [ 197.007] (EE) intel(0): failed to set cursor: Input/output error
    [ 200.991] (EE) intel(0): failed to set cursor: Input/output error
    [ 200.991] (EE) intel(0): failed to set cursor: Input/output error
    [ 202.499] (EE) intel(0): failed to set cursor: Input/output error
    [ 202.499] (EE) intel(0): failed to set cursor: Input/output error
    [ 203.164] (EE) intel(0): failed to set cursor: Input/output error
    [ 203.164] (EE) intel(0): failed to set cursor: Input/output error
    [ 207.322] (EE) intel(0): failed to set cursor: Input/output error
    [ 207.323] (EE) intel(0): failed to set cursor: Input/output error
    [ 208.093] (EE) intel(0): failed to set cursor: Input/output error
    [ 208.094] (EE) intel(0): failed to set cursor: Input/output error
    [ 209.080] (EE) intel(0): failed to set cursor: Input/output error
    [ 209.081] (EE) intel(0): failed to set cursor: Input/output error
    [ 209.641] (EE) intel(0): failed to set cursor: Input/output error
    [ 209.642] (EE) intel(0): failed to set cursor: Input/output error
    [ 214.392] (EE) intel(0): failed to set cursor: Input/output error
    [ 214.392] (EE) intel(0): failed to set cursor: Input/output error
    [ 214.885] (EE) intel(0): failed to set cursor: Input/output error
    [ 214.885] (EE) intel(0): failed to set cursor: Input/output error
    [ 225.899] (EE) intel(0): failed to set cursor: Input/output error
    [ 225.899] (EE) intel(0): failed to set cursor: Input/output error
    [ 225.912] (EE) intel(0): failed to set cursor: Input/output error
    [ 225.913] (EE) intel(0): failed to set cursor: Input/output error
    [ 244.351] (EE) intel(0): failed to set cursor: Input/output error
    [ 244.351] (EE) intel(0): failed to set cursor: Input/output error
    [ 245.332] (EE) intel(0): failed to set cursor: Input/output error
    [ 245.332] (EE) intel(0): failed to set cursor: Input/output error
    [ 248.711] (EE) intel(0): failed to set cursor: Input/output error
    [ 248.712] (EE) intel(0): failed to set cursor: Input/output error
    [ 249.347] (EE) intel(0): failed to set cursor: Input/output error
    [ 249.348] (EE) intel(0): failed to set cursor: Input/output error
    [ 252.594] (EE) intel(0): failed to set cursor: Input/output error
    [ 252.594] (EE) intel(0): failed to set cursor: Input/output error
    [ 253.062] (EE) intel(0): failed to set cursor: Input/output error
    [ 253.062] (EE) intel(0): failed to set cursor: Input/output error
    [ 273.635] (EE) intel(0): failed to set cursor: Input/output error
    [ 273.635] (EE) intel(0): failed to set cursor: Input/output error
    [ 274.148] (EE) intel(0): failed to set cursor: Input/output error
    [ 274.148] (EE) intel(0): failed to set cursor: Input/output error
    [ 285.208] (EE) intel(0): failed to set cursor: Input/output error
    [ 285.208] (EE) intel(0): failed to set cursor: Input/output error
    [ 287.473] (EE) intel(0): failed to set cursor: Input/output error
    [ 287.473] (EE) intel(0): failed to set cursor: Input/output error
    [ 353.216] (EE) intel(0): failed to set cursor: Input/output error
    [ 353.216] (EE) intel(0): failed to set cursor: Input/output error
    [ 355.928] (EE) intel(0): failed to set cursor: Input/output error
    [ 355.928] (EE) intel(0): failed to set cursor: Input/output error
    [ 357.845] (EE) intel(0): failed to set cursor: Input/output error
    [ 357.845] (EE) intel(0): failed to set cursor: Input/output error
    [ 360.465] (EE) intel(0): failed to set cursor: Input/output error
    [ 360.465] (EE) intel(0): failed to set cursor: Input/output error
    [ 361.916] (EE) intel(0): failed to set cursor: Input/output error
    [ 361.917] (EE) intel(0): failed to set cursor: Input/output error
    [ 363.505] (EE) intel(0): failed to set cursor: Input/output error
    [ 363.505] (EE) intel(0): failed to set cursor: Input/output error
    [ 364.433] (EE) intel(0): failed to set cursor: Input/output error
    [ 364.433] (EE) intel(0): failed to set cursor: Input/output error
    [ 366.375] (EE) intel(0): failed to set cursor: Input/output error
    [ 366.375] (EE) intel(0): failed to set cursor: Input/output error
    [ 367.953] (EE) intel(0): failed to set cursor: Input/output error
    [ 367.954] (EE) intel(0): failed to set cursor: Input/output error
    [ 369.092] (EE) intel(0): failed to set cursor: Input/output error
    [ 369.092] (EE) intel(0): failed to set cursor: Input/output error
    [ 372.906] (EE) intel(0): failed to set cursor: Input/output error
    [ 372.906] (EE) intel(0): failed to set cursor: Input/output error
    [ 374.450] (EE) intel(0): failed to set cursor: Input/output error
    [ 374.451] (EE) intel(0): failed to set cursor: Input/output error
    [ 376.802] (EE) intel(0): failed to set cursor: Input/output error
    [ 376.803] (EE) intel(0): failed to set cursor: Input/output error
    [ 378.140] (EE) intel(0): failed to set cursor: Input/output error
    [ 378.140] (EE) intel(0): failed to set cursor: Input/output error
    [ 382.347] (EE) intel(0): failed to set cursor: Input/output error
    [ 382.347] (EE) intel(0): failed to set cursor: Input/output error
    [ 383.812] (EE) intel(0): failed to set cursor: Input/output error
    [ 383.812] (EE) intel(0): failed to set cursor: Input/output error
    [ 386.612] (EE) intel(0): failed to set cursor: Input/output error
    [ 386.612] (EE) intel(0): failed to set cursor: Input/output error
    [ 388.092] (EE) intel(0): failed to set cursor: Input/output error
    [ 388.092] (EE) intel(0): failed to set cursor: Input/output error
    [ 389.436] (EE) intel(0): failed to set cursor: Input/output error
    [ 389.436] (EE) intel(0): failed to set cursor: Input/output error
    [ 391.131] (EE) intel(0): failed to set cursor: Input/output error
    [ 391.131] (EE) intel(0): failed to set cursor: Input/output error
    [ 392.372] (EE) intel(0): failed to set cursor: Input/output error
    [ 392.373] (EE) intel(0): failed to set cursor: Input/output error
    [ 393.630] (EE) intel(0): failed to set cursor: Input/output error
    [ 393.631] (EE) intel(0): failed to set cursor: Input/output error
    [ 394.932] (EE) intel(0): failed to set cursor: Input/output error
    [ 394.933] (EE) intel(0): failed to set cursor: Input/output error
    [ 396.629] (EE) intel(0): failed to set cursor: Input/output error
    [ 396.629] (EE) intel(0): failed to set cursor: Input/output error
    [ 398.349] (EE) intel(0): failed to set cursor: Input/output error
    [ 398.349] (EE) intel(0): failed to set cursor: Input/output error
    [ 400.264] (EE) intel(0): failed to set cursor: Input/output error
    [ 400.264] (EE) intel(0): failed to set cursor: Input/output error
    [ 402.517] (EE) intel(0): failed to set cursor: Input/output error
    [ 402.518] (EE) intel(0): failed to set cursor: Input/output error
    [ 404.749] (EE) intel(0): failed to set cursor: Input/output error
    [ 404.749] (EE) intel(0): failed to set cursor: Input/output error
    [ 407.798] (EE) intel(0): failed to set cursor: Input/output error
    [ 407.798] (EE) intel(0): failed to set cursor: Input/output error
    [ 411.170] (EE) intel(0): failed to set cursor: Input/output error
    [ 411.170] (EE) intel(0): failed to set cursor: Input/output error
    [ 411.910] (EE) intel(0): failed to set cursor: Input/output error
    [ 411.912] (EE) intel(0): failed to set cursor: Input/output error
    [ 413.276] (EE) intel(0): failed to set cursor: Input/output error
    [ 413.276] (EE) intel(0): failed to set cursor: Input/output error
    [ 414.775] (EE) intel(0): failed to set cursor: Input/output error
    [ 414.775] (EE) intel(0): failed to set cursor: Input/output error
    [ 416.762] (EE) intel(0): failed to set cursor: Input/output error
    [ 416.763] (EE) intel(0): failed to set cursor: Input/output error
    [ 420.439] (EE) intel(0): failed to set cursor: Input/output error
    [ 420.440] (EE) intel(0): failed to set cursor: Input/output error
    [ 424.614] (EE) intel(0): failed to set cursor: Input/output error
    [ 424.614] (EE) intel(0): failed to set cursor: Input/output error
    [ 426.920] (EE) intel(0): failed to set cursor: Input/output error
    [ 426.920] (EE) intel(0): failed to set cursor: Input/output error
    [ 430.033] (EE) intel(0): failed to set cursor: Input/output error
    [ 430.033] (EE) intel(0): failed to set cursor: Input/output error
    [ 432.265] (EE) intel(0): failed to set cursor: Input/output error
    [ 432.265] (EE) intel(0): failed to set cursor: Input/output error
    [ 435.339] (EE) intel(0): failed to set cursor: Input/output error
    [ 435.339] (EE) intel(0): failed to set cursor: Input/output error
    [ 437.705] (EE) intel(0): failed to set cursor: Input/output error
    [ 437.706] (EE) intel(0): failed to set cursor: Input/output error
    [ 441.112] (EE) intel(0): failed to set cursor: Input/output error
    [ 441.112] (EE) intel(0): failed to set cursor: Input/output error
    [ 444.922] (EE) intel(0): failed to set cursor: Input/output error
    [ 444.922] (EE) intel(0): failed to set cursor: Input/output error
    [ 448.296] (EE) intel(0): failed to set cursor: Input/output error
    [ 448.296] (EE) intel(0): failed to set cursor: Input/output error
    [ 450.299] (EE) intel(0): failed to set cursor: Input/output error
    [ 450.299] (EE) intel(0): failed to set cursor: Input/output error
    [ 453.190] (EE) intel(0): failed to set cursor: Input/output error
    [ 453.191] (EE) intel(0): failed to set cursor: Input/output error
    [ 455.467] (EE) intel(0): failed to set cursor: Input/output error
    [ 455.468] (EE) intel(0): failed to set cursor: Input/output error
    [ 458.751] (EE) intel(0): failed to set cursor: Input/output error
    [ 458.751] (EE) intel(0): failed to set cursor: Input/output error
    [ 460.132] (EE) intel(0): failed to set cursor: Input/output error
    [ 460.132] (EE) intel(0): failed to set cursor: Input/output error
    [ 462.768] (EE) intel(0): failed to set cursor: Input/output error
    [ 462.770] (EE) intel(0): failed to set cursor: Input/output error
    [ 464.061] (EE) intel(0): failed to set cursor: Input/output error
    [ 464.061] (EE) intel(0): failed to set cursor: Input/output error
    [ 467.064] (EE) intel(0): failed to set cursor: Input/output error
    [ 467.064] (EE) intel(0): failed to set cursor: Input/output error
    [ 469.637] (EE) intel(0): failed to set cursor: Input/output error
    [ 469.637] (EE) intel(0): failed to set cursor: Input/output error
    [ 472.446] (EE) intel(0): failed to set cursor: Input/output error
    [ 472.447] (EE) intel(0): failed to set cursor: Input/output error
    [ 475.654] (EE) intel(0): failed to set cursor: Input/output error
    [ 475.654] (EE) intel(0): failed to set cursor: Input/output error
    [ 477.849] (EE) intel(0): failed to set cursor: Input/output error
    [ 477.852] (EE) intel(0): failed to set cursor: Input/output error
    [ 481.102] (EE) intel(0): failed to set cursor: Input/output error
    [ 481.102] (EE) intel(0): failed to set cursor: Input/output error
    [ 483.658] (EE) intel(0): failed to set cursor: Input/output error
    [ 483.658] (EE) intel(0): failed to set cursor: Input/output error
    [ 486.239] (EE) intel(0): failed to set cursor: Input/output error
    [ 486.239] (EE) intel(0): failed to set cursor: Input/output error
    [ 489.082] (EE) intel(0): failed to set cursor: Input/output error
    [ 489.083] (EE) intel(0): failed to set cursor: Input/output error
    [ 491.279] (EE) intel(0): failed to set cursor: Input/output error
    [ 491.280] (EE) intel(0): failed to set cursor: Input/output error
    [ 494.315] (EE) intel(0): failed to set cursor: Input/output error
    [ 494.315] (EE) intel(0): failed to set cursor: Input/output error
    [ 495.905] (EE) intel(0): failed to set cursor: Input/output error
    [ 495.905] (EE) intel(0): failed to set cursor: Input/output error
    [ 498.171] (EE) intel(0): failed to set cursor: Input/output error
    [ 498.172] (EE) intel(0): failed to set cursor: Input/output error
    [ 499.312] (EE) intel(0): failed to set cursor: Input/output error
    [ 499.313] (EE) intel(0): failed to set cursor: Input/output error
    [ 501.813] (EE) intel(0): failed to set cursor: Input/output error
    [ 501.813] (EE) intel(0): failed to set cursor: Input/output error
    [ 502.817] (EE) intel(0): failed to set cursor: Input/output error
    [ 502.817] (EE) intel(0): failed to set cursor: Input/output error
    [ 507.125] (EE) intel(0): failed to set cursor: Input/output error
    [ 507.125] (EE) intel(0): failed to set cursor: Input/output error
    [ 508.209] (EE) intel(0): failed to set cursor: Input/output error
    [ 508.210] (EE) intel(0): failed to set cursor: Input/output error
    [ 540.521] (EE) intel(0): failed to set cursor: Input/output error
    [ 540.526] (EE) intel(0): failed to set cursor: Input/output error
    [ 541.621] (EE) intel(0): failed to set cursor: Input/output error
    [ 541.621] (EE) intel(0): failed to set cursor: Input/output error
    [ 552.597] (EE) intel(0): failed to set cursor: Input/output error
    [ 552.597] (EE) intel(0): failed to set cursor: Input/output error
    [ 553.470] (EE) intel(0): failed to set cursor: Input/output error
    [ 553.471] (EE) intel(0): failed to set cursor: Input/output error
    [ 554.186] (EE) intel(0): failed to set cursor: Input/output error
    [ 554.186] (EE) intel(0): failed to set cursor: Input/output error
    [ 555.103] (EE) intel(0): failed to set cursor: Input/output error
    [ 555.103] (EE) intel(0): failed to set cursor: Input/output error
    [ 690.143] (EE) intel(0): failed to set cursor: Input/output error
    [ 690.143] (EE) intel(0): failed to set cursor: Input/output error
    [ 690.263] (EE) intel(0): failed to set cursor: Input/output error
    [ 690.263] (EE) intel(0): failed to set cursor: Input/output error
    [ 690.333] (EE) intel(0): failed to set cursor: Input/output error
    [ 690.333] (EE) intel(0): failed to set cursor: Input/output error
    [ 690.557] (EE) intel(0): failed to set cursor: Input/output error
    [ 690.557] (EE) intel(0): failed to set cursor: Input/output error
    [ 690.591] (EE) intel(0): failed to set cursor: Input/output error
    [ 690.591] (EE) intel(0): failed to set cursor: Input/output error
    [ 690.606] (EE) intel(0): failed to set cursor: Input/output error
    [ 690.607] (EE) intel(0): failed to set cursor: Input/output error
    [ 691.055] (EE) intel(0): failed to set cursor: Input/output error
    [ 691.055] (EE) intel(0): failed to set cursor: Input/output error
    [ 691.070] (EE) intel(0): failed to set cursor: Input/output error
    [ 691.071] (EE) intel(0): failed to set cursor: Input/output error
    [ 755.300] (EE) intel(0): failed to set cursor: Input/output error
    [ 755.300] (EE) intel(0): failed to set cursor: Input/output error
    [ 755.444] (EE) intel(0): failed to set cursor: Input/output error
    [ 755.444] (EE) intel(0): failed to set cursor: Input/output error
    [ 765.910] (EE) intel(0): failed to set cursor: Input/output error
    [ 765.911] (EE) intel(0): failed to set cursor: Input/output error
    [ 769.826] (EE) intel(0): failed to set cursor: Input/output error
    [ 769.827] (EE) intel(0): failed to set cursor: Input/output error
    [ 771.279] (EE) intel(0): failed to set cursor: Input/output error
    [ 771.279] (EE) intel(0): failed to set cursor: Input/output error
    [ 776.475] (EE) intel(0): failed to set cursor: Input/output error
    [ 776.475] (EE) intel(0): failed to set cursor: Input/output error
    [ 777.584] (EE) intel(0): failed to set cursor: Input/output error
    [ 777.584] (EE) intel(0): failed to set cursor: Input/output error
    [ 782.163] (EE) intel(0): failed to set cursor: Input/output error
    [ 782.163] (EE) intel(0): failed to set cursor: Input/output error
    [ 784.345] (EE) intel(0): failed to set cursor: Input/output error
    [ 784.345] (EE) intel(0): failed to set cursor: Input/output error
    [ 789.813] (EE) intel(0): failed to set cursor: Input/output error
    [ 789.814] (EE) intel(0): failed to set cursor: Input/output error
    [ 793.986] (EE) intel(0): failed to set cursor: Input/output error
    [ 793.986] (EE) intel(0): failed to set cursor: Input/output error
    [ 796.717] (EE) intel(0): failed to set cursor: Input/output error
    [ 796.717] (EE) intel(0): failed to set cursor: Input/output error
    [ 802.971] (EE) intel(0): failed to set cursor: Input/output error
    [ 802.971] (EE) intel(0): failed to set cursor: Input/output error
    [ 805.567] (EE) intel(0): failed to set cursor: Input/output error
    [ 805.568] (EE) intel(0): failed to set cursor: Input/output error
    [ 807.811] (EE) intel(0): failed to set cursor: Input/output error
    [ 807.811] (EE) intel(0): failed to set cursor: Input/output error
    [ 814.410] (EE) intel(0): failed to set cursor: Input/output error
    [ 814.410] (EE) intel(0): failed to set cursor: Input/output error
    [ 815.460] (EE) intel(0): failed to set cursor: Input/output error
    [ 815.460] (EE) intel(0): failed to set cursor: Input/output error
    [ 818.800] (EE) intel(0): failed to set cursor: Input/output error
    [ 818.800] (EE) intel(0): failed to set cursor: Input/output error
    [ 821.589] (EE) intel(0): failed to set cursor: Input/output error
    [ 821.589] (EE) intel(0): failed to set cursor: Input/output error
    [ 825.657] (EE) intel(0): failed to set cursor: Input/output error
    [ 825.657] (EE) intel(0): failed to set cursor: Input/output error
    [ 828.078] (EE) intel(0): failed to set cursor: Input/output error
    [ 828.078] (EE) intel(0): failed to set cursor: Input/output error
    [ 831.833] (EE) intel(0): failed to set cursor: Input/output error
    [ 831.834] (EE) intel(0): failed to set cursor: Input/output error
    [ 833.806] (EE) intel(0): failed to set cursor: Input/output error
    [ 833.807] (EE) intel(0): failed to set cursor: Input/output error
    [ 835.978] (EE) intel(0): failed to set cursor: Input/output error
    [ 835.978] (EE) intel(0): failed to set cursor: Input/output error
    [ 840.143] (EE) intel(0): failed to set cursor: Input/output error
    [ 840.143] (EE) intel(0): failed to set cursor: Input/output error
    [ 854.335] (EE) intel(0): failed to set cursor: Input/output error
    [ 854.335] (EE) intel(0): failed to set cursor: Input/output error
    [ 855.471] (EE) intel(0): failed to set cursor: Input/output error
    [ 855.471] (EE) intel(0): failed to set cursor: Input/output error
    [ 867.428] (EE) intel(0): failed to set cursor: Input/output error
    [ 867.429] (EE) intel(0): failed to set cursor: Input/output error
    [ 870.354] (EE) intel(0): failed to set cursor: Input/output error
    [ 870.355] (EE) intel(0): failed to set cursor: Input/output error
    [ 873.062] (EE) intel(0): failed to set cursor: Input/output error
    [ 873.062] (EE) intel(0): failed to set cursor: Input/output error
    [ 873.955] (EE) intel(0): failed to set cursor: Input/output error
    [ 873.955] (EE) intel(0): failed to set cursor: Input/output error
    [ 877.131] (EE) intel(0): failed to set cursor: Input/output error
    [ 877.132] (EE) intel(0): failed to set cursor: Input/output error
    [ 878.020] (EE) intel(0): failed to set cursor: Input/output error
    [ 878.021] (EE) intel(0): failed to set cursor: Input/output error
    [ 880.499] (EE) intel(0): failed to set cursor: Input/output error
    [ 880.499] (EE) intel(0): failed to set cursor: Input/output error
    [ 881.708] (EE) intel(0): failed to set cursor: Input/output error
    [ 881.708] (EE) intel(0): failed to set cursor: Input/output error
    [ 884.711] (EE) intel(0): failed to set cursor: Input/output error
    [ 884.711] (EE) intel(0): failed to set cursor: Input/output error
    [ 893.533] (EE) intel(0): failed to set cursor: Input/output error
    [ 893.533] (EE) intel(0): failed to set cursor: Input/output error
    [ 896.537] (EE) intel(0): failed to set cursor: Input/output error
    [ 896.537] (EE) intel(0): failed to set cursor: Input/output error
    [ 898.029] (EE) intel(0): failed to set cursor: Input/output error
    [ 898.030] (EE) intel(0): failed to set cursor: Input/output error
    [ 901.447] (EE) intel(0): failed to set cursor: Input/output error
    [ 901.447] (EE) intel(0): failed to set cursor: Input/output error
    [ 902.670] (EE) intel(0): failed to set cursor: Input/output error
    [ 902.670] (EE) intel(0): failed to set cursor: Input/output error
    [ 907.266] (EE) intel(0): failed to set cursor: Input/output error
    [ 907.267] (EE) intel(0): failed to set cursor: Input/output error
    [ 908.415] (EE) intel(0): failed to set cursor: Input/output error
    [ 908.415] (EE) intel(0): failed to set cursor: Input/output error
    [ 911.083] (EE) intel(0): failed to set cursor: Input/output error
    [ 911.083] (EE) intel(0): failed to set cursor: Input/output error
    [ 912.335] (EE) intel(0): failed to set cursor: Input/output error
    [ 912.335] (EE) intel(0): failed to set cursor: Input/output error
    [ 914.699] (EE) intel(0): failed to set cursor: Input/output error
    [ 914.699] (EE) intel(0): failed to set cursor: Input/output error
    [ 915.519] (EE) intel(0): failed to set cursor: Input/output error
    [ 915.520] (EE) intel(0): failed to set cursor: Input/output error
    [ 921.179] (EE) intel(0): failed to set cursor: Input/output error
    [ 921.180] (EE) intel(0): failed to set cursor: Input/output error
    [ 923.296] (EE) intel(0): failed to set cursor: Input/output error
    [ 923.297] (EE) intel(0): failed to set cursor: Input/output error
    [ 926.020] (EE) intel(0): failed to set cursor: Input/output error
    [ 926.021] (EE) intel(0): failed to set cursor: Input/output error
    [ 926.881] (EE) intel(0): failed to set cursor: Input/output error
    [ 926.881] (EE) intel(0): failed to set cursor: Input/output error
    [ 930.252] (EE) intel(0): failed to set cursor: Input/output error
    [ 930.252] (EE) intel(0): failed to set cursor: Input/output error
    [ 931.105] (EE) intel(0): failed to set cursor: Input/output error
    [ 931.105] (EE) intel(0): failed to set cursor: Input/output error
    [ 938.375] (EE) intel(0): failed to set cursor: Input/output error
    [ 938.376] (EE) intel(0): failed to set cursor: Input/output error
    [ 951.395] (EE) intel(0): failed to set cursor: Input/output error
    [ 951.396] (EE) intel(0): failed to set cursor: Input/output error
    [ 997.695] (EE) intel(0): failed to set cursor: Input/output error
    [ 997.695] (EE) intel(0): failed to set cursor: Input/output error
    [ 1034.261] (EE) intel(0): failed to set cursor: Input/output error
    [ 1034.261] (EE) intel(0): failed to set cursor: Input/output error
    [ 1042.673] (EE) intel(0): failed to set cursor: Input/output error
    [ 1042.674] (EE) intel(0): failed to set cursor: Input/output error
    [ 1058.408] (EE) intel(0): failed to set cursor: Input/output error
    [ 1058.408] (EE) intel(0): failed to set cursor: Input/output error
    [ 1061.964] (EE) intel(0): failed to set cursor: Input/output error
    [ 1061.964] (EE) intel(0): failed to set cursor: Input/outpu

    I have installed the xf86-video-intel-newest from AUR, but with modified version - 2.13.0. Now mouse pointer works.

  • I bought a Sandisk Connect Media Drive, downloaded the app from iTunes.  Before iOS 8, movies played fine.  After iOS upgrade I can no longer play movies downloaded from iTunes to the media drive.  Anyone else have a similar issue?

    I bought a Sandisk Connect Media Drive, downloaded the app from iTunes.  Before iOS 8, movies played fine.  After iOS upgrade I can no longer play movies downloaded from iTunes to the media drive.  Anyone else have a similar issue?

    I checked with SanDisk's own online support and they indicate that they have notified Apple of the issue.
    According to SanDisk, the problem lies with Apple not having the iOS 8 version of the Safari browser having DRM decoding enabled that the Media Drive relies upon to decode and play iTunes DRM titles. Non DRM encoded videos will play in the browser.
    DRM audio is not effected as this is handled by the native iOS music app.
    As of the date of this post SanDisk have not been given a timeframe by Apple for this issue to be resolved.
    I hope that Apple resolves this issue quickly as I have a large collection of DRM video titles on a 128Mb memory card installed in the Media Drive that I am unable to view.

  • Some web sites not working in FF but they are OK in Safari.

    A couple of times lately I have had web sites not work correctly with Firefox. I need to switch to Safari to complete the tasks I needed to do. My FF is running on Mountain Lion and is up to date.
    Thanks,
    MJT

    Hello michaeljt, the sites you have problem, is it with a lot of flash content ?
    Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
    Note: ''This will temporarily log you out of all sites you're logged in to.''
    To clear cache and cookies do the following:
    #Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
    #Under "Time range to clear", select "Everything".
    #Now, click the arrow next to Details to toggle the Details list active.
    #From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
    #Now click the ''Clear now'' button.
    Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
    Please reload the webpage while bypassing the cache using '''one''' of the following steps:
    *Hold down the ''Shift'' key and click the ''Reload'' button with the left mouse key.
    OR
    *Press ''Ctrl'' + ''F5'' or ''Ctrl'' + ''Shift'' + ''R'' (Windows and Linux)
    *Press ''Command'' + ''Shift'' + ''R'' (Mac)
    See if this helps solve the issues you had and please report back to us!
    thank you

  • I have an issue with Acrobat, after a few uses, the program will not load, the only way to fix it is to completely uninstall the CS suite wipe the drive and reinstall the software, then after a few uses it stops working, how do i fix this?

    after a few uses, the program will not load, the only way to fix it is to completely uninstall the CS suite wipe the drive and reinstall the software, then after a few uses it stops working, how do i fix this?

    Not sure of an answer to your basic question, but it may be that you can run a repair (on Windows --> Control Panel>Programs & Features and run the repair on Acrobat). If that fixes the issue, at least temporarily, at least you will not be reinstalling everything -- a real pain.
    Next, open Acrobat and go to the Help to run the updates and be sure you are current. On some OSs, the updates are critical.

  • My iphone 4 was updated 2 months ago, after updated the safari suddenly stopped working.I open the safari and it stops immediately. i cannot download anything or access any website through Safari. What shall i do to resolve this issue?

    My iphone 4 was updated 2 months ago, after updated the safari suddenly stopped working.I open the safari and it stops immediately. i cannot download anything or access any website through Safari. What shall i do to resolve this issue?

    Yes but there's no point doing it here. As the Terms of Use make quite clear this is a User to User forum. It's Users like you talking to other Users. It's not a channel to communicate with Apple.
    Regards
    TD

Maybe you are looking for

  • Why can't I download TV episodes in Germany?

    Hi I would really like to know why Apple won't/can't offer downloads for Videos in Germany. It's very very frustrating to find your favorite show, only to see a certain iTunes Message which goes like 'The content you are requesting is not available i

  • What is a normal charge capacity after 6 months?

    after 134 cycles my 6 month old Macbook pro has a full charge capacity of 1928mah. (From researchig it seems that a new battery is around 7000mah). I was hoping that after 6 months the battery's condition would still be "Normal" if not "Good" but it

  • DocumentBuilder.parse classpath problem

    Hi, I've the "xerces.jar" in my classpath, and I'm using it like this: import javax.xml.parsers.ParserConfigurationException; import javax.xml.parsers.DocumentBuilder; import javax.xml.parsers.DocumentBuilderFactory; import javax.servlet.http.HttpSer

  • No stereo input in logic8, analog or digit., when not in universal track m.

    till now , in logic7 , I didnt work in Unversal track mode. When upgrading to logic8 ,its not possible to create a stereo input, analog or spdif,. When I try to record , I cannot see the waveform in arr. window, but when I stop rec. , the record is d

  • Exchange rate in service entry sheet

    Hi, Could someone tell me how the exchange rate gets determined in service entry sheet. I am facing a problem while doing ML81N. While doing so when I click on condition type, I see the exchange rate as INR to USD = 0.080, while for all the other ite