After iOS5, iPhone 4 shuts down and hangs with spinning wheel

This has happened twice so far. I'm not aware of any particular action that causes the problem. I know in both cases it happened while the iPhone had a good charge. Next time I looked at it, the screen showed the spinning wheel one normally sees during shutdown, but was stuck there.
I'm surprised I'm not seeing this on the forum already. Anyone else?

You're not alone Jason.  I've been having this problem after the second update for iOS5.  My Iphone had been working great and I became very attached to it.  Maybe you and I are the only ones to have this issue?
For any future posters, I continue to have this problem after:
- restoring my phone as a new device (not restoring settings\data from backup)
- refrain from downloading any apps
- ensuring apps are turned off when not using them
This is affecting my job now where I'll probably have to buy a cheap phone to ensure my clients can always get a hold of me.  If you're reading Apple....please help us.

Similar Messages

  • HT1766 After I click the button updates in my iphone, my iphone get started but after that iphone shut down and could not be open. Please advise .

    After I click the button updates in my iphone, my iphone get started but after that iphone shut down and could not be open. Please advise .

    Hello Wilson@w,
    The article linked below details the process of placing your device in recovery mode in order to complete the update.
    If you can't update or restore your iOS device
    http://support.apple.com/kb/HT1808
    Cheers,
    Allen

  • HT201210 I was in the middle of installing the new update using the wifi at a local restaurant when I lost the wifi signal and my iPhone shut down, and now I can't get into the phone. I only get the iTunes logo with the cable pic. What are my options now?

    I was in the middle of installing the new update using the wifi at a local restaurant when I lost the wifi signal and my iPhone shut down, and now I can't get into the phone. I only get the iTunes logo with the cable pic. What are my options now?

    Your only option is to connect your iPhone to your computer via USB (as the diagram indicates) and restore using iTunes.

  • My iphone shut down and won't start up

    my iphone shut down and won't start up.  HELP!

    Try #2 and #3 in link below. If neither work, you most likely have a hardware issue.
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
     In Memory of Steve Jobs 

  • HT1349 my mothers iPhone shut down and didn't turn back on and it was not dead

    my mothers iPhone shut down and didn't turn back on and it was not dead

    See https://discussions.apple.com/docs/DOC-3763.

  • Imac won't shut down, blue screen with spinig wheel is on and computer never shuts until I hold the power button down and shut it manualy..

    Imac won't shut down,
    blue screen with spinig wheel is on and computer never shuts until I hold the power button down and shut it manualy..

    This is the instruction article for Intel-based Macs:
    http://support.apple.com/kb/HT3964
    Your profile does not indicate the type of Mac you are using.
    Barry

  • TS1538 my iphone shut down and will not turn on.  how do i get it to turn on?

    my iphone shut down and will not turn on.  how do i get it to turn on?

    Connect iPhone to Wall Charger for 10 minutes it may turn ON itself. If still OFF, keep on charger and Reset, hold both home and power buttons for about 20 seconds until the iPhone begins to start.

  • My iPhone shut down and factory reset itself for no reason, and now when I plug it into my computer or any power source, the apple shines but it doesn't get any further than that. How can I fix it?

    My iPhone shut down and factory reset itself for no reason, and now when I plug it into my computer or any power source, the apple shines but it doesn't get any further than that. How can I fix it?

    Try Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...
    But... if the Device has been Modified... this will Not necessarily work.

  • HT4137 My iphone shut down and it wany turn back on and i already tried to reset it! What can I do to get it back on!

    My iphone 4 shut down and I cant get it to turn back on and I alredy tried to reset it! What do I do to get it turned back on!

    Hello Tammy 78,
    It sounds like your phone will not power on after it turned itself off unexpectedly. I would use this section of the following article to help you resolve the issue:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • My iphone shuts down and wont turn back on. any help please

    my iphone shuts down by itself and wont turn back on, what should i do?

    If you didn't see anything at all your phone has defective hardware. Connect to the charger again, and while connected hold both buttons. If the phone comes back on, but goes off when you disconnect the charger, you have a bad battery. If it doesn't come on at all you have a hardware failure of the phone. If you see any instructions on the screen, such as an image of a phone connecting to iTunes, follow them; your phone may need to be restored.

  • Iphone shut down and wont turn back on. Help me!!!

    iphone 4 shut down and wont let me turn back on. Help me!!!

    Reset, hold down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up.

  • ARD Administrator hangs with "Spinning Wheel of Death" after Apple Updates

    Help! I added the required eight Apple Updates today (11/23/09) and Apple Remote Desktop (ARD) Administrator stopped working. The installed updates are iTunes, 9.0.3, Remote Desktop Client Update 3.3.1, Java for Mac OS X 10.5 Update 5 1.0, Security Update 2009-006 1.0, Bluetooth Firmware Update 2.0.1, Safari 4.0.4, Performance Update 1.0, and iMovie Update 8.0.5.
    Since these updates, the ARD Administrator hangs up (spinning wheel) when trying to activate it. I receive the error message:
    The Remote Desktop Administrator software failed to start due to an unexpected error. The Remote Desktop software may not be installed correctly, or the computer may require a restart. [Quit]
    I have tried restarts, poweroffs, etc., but the ARD Administrator stills hangs. What can I do to reverse the last ARD update?

    Without java, Safari is just as fast as Firefox. And if you do for some reason need java, you can use Firefox instead (as I had to, to log into the Apple Discussions" page.
    Safari is faster than Firefox. There are very few sites that need use Java, so unless you know a site uses it, it should always be disabled. And for clarification, no part of the Apple web site uses Java, so there's no reason to have it activated.

  • With Firefox 4 gmail stays logged in after Firefox is shut down and restarted

    This is related to the post mentioned here: https://support.mozilla.com/en-US/questions/811479
    with a twist.
    In Firefox 4 if you shut down the browser without signing out of gmail you stay signed in, even after a full system shutdown and restart.
    I HAVE NO APP TABS etc, and my security settings are also normal (viz. no stay signed in etc etc) I also always use HTTPS
    (In earlier versions, if you didnt always use https, then shutting the browser wouldnt log you out. But if you always used https, you would be logged out)
    Heres what happens: First let me make it clear that I have no app tabs, and all the other settings are correct (viz. no stay signed in etc etc). Now say one of the open tabs is my mail inbox. If I close and restart browser, I'll be in my inbox!! (Earlier versions of firefox took me to the login page).
    Whats the issue here? Does everyone else also experience this?

    This is a massive design flaw or bug and needs fixing; I can't recall a larger direct security issue than leaving people prepped for auto-login upon closing a browser, and to one of the most popular email providers in the world. Persisting since v.4 all the way up to current v7.0.1. Ridiculous.

  • Mac Pro freezes after sleep, wont shut down, and 5870 issue

    Hi,
    I just got my new Mac Pro 3.33Ghz hexacore a couple of days ago and I've been having some issues with it.
    1) When waking up the comp from sleep and its been cold for a while, the Mac Pro freezes. I can still move the mouse but that's about it. So, I have to do a hard restart. But...
    2) Since last night I'm not able to turn the MP off. When I try to shut it down from the menu it closes all the apps and nothing but the background and dock shows and it gets stuck there. So I have to do a hard restart, but when pressing down the power button it just goes to sleep rather then shutting down, so only way to turn it off is to pull out the cord.
    3) And the last problem I'm having is in bootcamp. When I play games (Battlefield Bad Company 2 or Crysis) the computer freezes after 3 min or so. The screen either turns blue or black and I have to shut it down. I am able to do the hard restart in Windows 7, in fact I just have to press the power button ones and it shuts off correctly.
    I'm really frustrated since in the last 2 months I've had 3 iMacs and this MP and all have had problems. My old 20in iMac has been running for a couple of years now and has never had any problem...
    Also, if I have to take it to the Apple store, is there anyway a tech can come to my house? I'm tired of going to the Apple store all the time, its a big hassle taking the comp there, plus I don't feel like they're really helping me.
    Thanks for your help!

    just wanted to update you guys on what the official stance of OWC is on this situation. I had the same problem like you guys. I have the 240GB OWC extreme pro SSD in my Mac Pro 3,1. When it goes to sleep, and i leave it sleeping for a day -- upon returning, it will freeze up with the spinning wheel of death.
    This is what they had to say about it:
    "While Sleep will work with our SSDs, there have been reports of system hangs in relation to hibernation mode which is the deep state of Sleep. We suggest not using ANY program that puts your computer into hibernation mode when using an SSD. SandForce is working on this issue and it will be addressed in a future firmware update.
    Normal, automatic sleep mode functions perfectly with no issues. But if you need to try and fix the hibernation issue with your Mac revision, please Open up Terminal (Applications>Utilities>Terminal) and go through the following steps:
    Type: sudo pmset hibernatemode 0
    Press: return/enter.
    Type: your password when it prompts you to, then press return/enter again.
    You have successfully disabled hibernation! Go ahead and exit Terminal.
    Also, some have chose to use the application SmartSleep, which is free online. http://www.macupdate.com/app/mac/26979/smartsleep
    SmartSleep is an application that you can use to set the hibernation mode on your computer.
    I apologize for the inconvenience. I sincerely appreciate your patience and understanding in this matter and hope you will continue to bear with us as our extreme SSD product line transitions through these evolutions and unforeseen road bumps. Please let us know if there's anything else we may do to help."
    --I would like to add that the OWC SSD is great. And since Downloading smart sleep and disabling deep sleep aka hibernate, the issue has been totally resolved. Im pretty sure the terminal entry works just as well. But I liked the added convenience of the other features of smartsleep. So there you go guys.

  • Intel Based IMac OS X 10.5.8 freeze on shut down and hang ups

    Have an Intel IMac8,1 OS X 10.5.8
    Computer has been freezing up on shut down, will log out and hold right at the shut down screen with a loading icon running.  Will have to force shut down with power button.  Applications have been loading slower than usual and computer hangs up frequently.  IMac has been offline(no internet connection) for about 6-7 months, reconnected recently. 
    Have updated all recommended updates, would my outdated operating system be the problem?  Not sure if during the time of being offline, important updates/firmware I might need?  Should I update my OS X or is their a fix/update that will work?
    Read a post about verifying permissions...?
    Any help would be greatly appreciated!

    would my outdated operating system be the problem?
    Nope, something else.
    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
    Then see how many of these you can answer...
    See if the Disk is issuing any S.M.A.R.T errors in Disk Utility...
    http://support.apple.com/kb/PH7029
    Open Activity Monitor in Applications>Utilities, select All Processes & sort on CPU%, any indications there?
    How much RAM & free space do you have also, click on the Memory & Disk Usage Tabs.
    Open Console in Utilities & see if there are any clues or repeating messages when this happens.
    In the Memory tab, are there a lot of Pageouts?

Maybe you are looking for

  • How to disable the Project role id in cProject

    Hi All, I would like to disable  project role id field under resource tab in cProject. Now it is editable I would like to disable. Can any one please let me how to do it. Thanks, Preddy.

  • Connecting & Using G3 iBook With MacBook Pro

    I am planning to buy a MacBookPro shortly when I am in the States. Will I be able to connect to my iBook G3 on 10.3.9 (640mb) both to transfer files and to use the iBook as an external hard-drive (bootable)? If so, do I need anything more than the co

  • How to solve the issue of 'Unable to join the network' on my iPhone 5!?

    I used to connect to a wifi network on my iPhone 5 and suddenly i could not connect anymore to this network. My phone kept showing 'Unable to join the network'. I tried 'forget this network' and resetting the network settings but none of these soluti

  • How do i convert old elements places tags to elements 12 places tags?

    I have spent over 10 years organizing almost 9000 photos and videos using Adobe Photoshop Album and Adobe Photoshop Elements Organizer. I recently upgraded to Elements 12, and I am trying to tag my vacation photos. I tried to add a new Places tag. Th

  • Start issue oc4j standalone

    os windows server 2008 oc4j version 10.1.3.4 i try to start oc4j standalone with this command java -jar oc4j.jar in the commandline i get the following 10/08/17 12:55:07 Oracle Containers for J2EE 10g (10.1.3.4.0) initialized but nothing more happens