After iOS5 update, iPod no longer connects to car stereo

Hi,
my husband and I both have an iPod touch 4th generation.
We also have a Dodge Caravan with a car stereo, that lets up hook up the iPods and control them over the display. The cable does not charge the iPods, but we knew that.
I have updatedt my iPod a while ago and never encountered any problems with the car stereo.
My husband updated his iPod to iOS5 today, and the car stereo does not connect via the cable. On the iPods display it just says, an error has ocurred.
Would that be a hardware issue? The iPod is a month or two past warranty. We already tried restarting and resetting the iPod (not to factory settings).
Is there maybe a way, to return the iPod to iOS4?
Thanks for any help

Sometimes, when you cannot "see" your ipod, it is because the drive that was assigned to the ipod, when you connected it, is already being used by the other devise. Your ipod is connected, but is "under" the other item, which means that you have to disconnect that item, so that you can "see" it. It will not be one of the drives that are normally associated with the computer like the C drive, or the ones assigned to your disc drives. It would be a drive that was assigned to an external devise, or another USB devise. This may or may not be your problem, but it is worth a shot.

Similar Messages

  • IPod no longer works with car stereo since upgraded MBA & iTunes

    My iPod classic has worked just fine connected to my car stereo since i bought it last june. I just bought a new Macbook Air (OS 10.7.3) & installed ITUNES 10.6.1. After I synched my ipod for the first time its recognised by the car but i get a "can't read data" message. I re-formatted my ipod but its exactly the same. Do you think its the upgrade- or the cable? Has anyone else found a bug with this version of Itunes or the OS? I have my doubts a cable would make the difference, and my old ipod nano that i haven't synched for a while works fine.

    If standalone works fine, then, most likely the 30 pin connect may have some dirt or lint, prevent data transfer.
    You can try to blow it clean, if you have a can of compressed air or gas.
    Alternatively you can connect it to the car stereo and do the RESET, while connnected.as follows
    Toggle the Hold switch, make sure you dont see the red mark when you do the  next step
    Reset the iPod -> Press Menu and Center button simultaneously for about 10 secs or till the Apple Logo comes ON
    Then release the buttons
    Select your preferred language.
    Here is the Apple support Article on the 5Rs
    http://www.apple.com/support/ipod/five_rs/classic/
    The Reset sequence may send a signal to the Car stereo to do the right thing

  • Communication errors when iPod 2nd gen connected to car stereo

    So a while back I ultimately decided to update my 2nd gen iPod touch from iOS 3.1.3 to the highest it'll support, which I believe is iOS 4.2.1. The update went fine, and everything seemed to be working alright until I plugged it into my car's stereo as I normally do while going to work and back. I'll detail the problem below.
    The stereo is aftermarket, a Pioneer unit, which is probably considered really old by today's standards but for me it still works beautifully. I plug the iPod in via the USB port it has. Before updating the iPod, there were no problems. After the update, specific songs on the iPod will trigger an "Error-19" to display on the screen of the stereo, and all control of the iPod ceases to function. The error refers to a communication error of some sort between the iPod and the stereo. Now the strange thing is that even though this error pops up, the iPod will continue to play the song that caused the error and proceed to the next track when it's done. I have my iPod playing on shuffle so when this error comes up I have to wait for the song to finish and hope the next one doesn't trip the error again when I unplug and plug the iPod back in. Doing that while the song is still playing just produces the same error. Ifthe next track is fine, plugging it back in restores all function.
    So while this error isn't the end of the world, it's a brain teaser that's been irking me for a few weeks now. I'm hoping someone may know if something within iOS was changed between 3.x and 4.2.1 that might cause this type of communication error to come up. I originally thought it may have something to do with ID3 tags and some rogue setting that confuses the stereo when it's sent over, but I couldn't really find any major difference between songs that work perfectly fine and those that cause the error to show up. I'm at a loss here so any isight would be appreciated.
    Also of note, I am aware that upgrading to a newer stereo or newer iPod will undoubtedly fix this, but I don't really have a need to spend money replacing equipment that is still in working order. Thanks for your time.

    Sometimes this works:
    - Reset the car system
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.             
    If not then contact the Pioneer. Maybe there is a firmware update available for the car system.
    Yes, other users have reported that updated to iOS 4 broke compatibility with some care systems.

  • Update caused lack of connectivity to car stereo

    Updated my ipod touch to the latest software (4.2) and now my car stereo won't recognize it. I get a incompatible error message from the stereo. Took the car to the dealer, connects with an un-updated iPod, but not the most recent update. Does Apple have a fix for it's fix or am I out of luck?
    Thanks!!

    Well, in Apple's defense how do you know that the stereo manufacturer explicitly followed Apple's standard? Just because it once worked doesn't mean they did everything correctly. Do not expect Apple to do anything, it won't happen. Push back on the other side, though you may not have luck there either.
    However, if you have a 4G Touch, make sure you're using the iPod cable it came with. I've seen someone say that their 4G Touch will only work in their truck with the supplied cable, not the cable from their 2G Touch. I don't know for sure if Apple changed the internals of the iPod cable, but its not out of the question, and perhaps the iOS update now takes advantage of whatever change Apple may have made to the cable.

  • Ios 4 3gs Now will not play through my usb/ipod connection on car stereo

    With new ios4 I cannot get my 3gs to play through my car stereo's ipod connection (usb)anymore. os3.1 or whatever the old os was worked fine. The car stereo controlled the tracks, artists, etc.. Now I plug the phone in and get a message saying it is not optimized to work with the stereo and may be subject to noise and interference, then the only option to click is "dismiss" and will not work. Any ideas? I tried the re sync and still will not work.

    The method used to recognize the USB device has a clever bit of code in the firmware to improve the connect time once the initial handshake with the device has been established. So after the update to iOS4, the host device (Car Stereo) still thinks that it is connecting to the un-updated client device (iPhone prior to updating to iOS4) The updated client device (Your iPhone with iOS4), must fool the host device (Your car stereo), into believing that it is an entirely new device. This is done by connecting your iPhone to the stereo head USB port with the iPhone switched off completely. This is achieved by holding down the top power button on the iPhone until the red slide bar comes up and prompts you to shut the iPhone down. Do this and then with the car stereo switched on, plug the iPhone into the USB socket and wait till the iPhone starts of it's own accord. If it does not start, press the top power button on the phone until it starts. This will force the host device (Your car stereo) and the client device (Your iPhone) to re-negotiate the handshake between the devices and get you back to where you will once again be happy.
    Now we can all stop beating up both the Car Stereo manufacturers and Apple and focus on being civil gentle folk that enjoy discussions about how clever we all are to be able to use amazing technology to get ourselves over-stressed and irritable.

  • After iOS5 update apps blink and don't open and music content is gone and won't sync onto iPod

    After iOS5 update apps blink and don't open after trying to select them, and the music content was completely gone! Help!

    See the following:
    I updated my ipad 2 to ios5 and now apps won't open they just blink.  What should i do?
    Just updated iphone4 to ios5, now apps won't open, they blink once but won't run
    When you look at the storage usage of the iPod in iTunes (the colored bargraph) , how much is in the "other" category? If very large yu will have to restore you riPod to get it down to is normal less than about 1/2 GB.

  • After ios5 update, I am not getting any sound when I play music.

    After ios5 update, I am not getting any sound when I play music (iphone  speakers or headphones).  I get sound from games, previewing songs in iTunes, etc.  Any idea why?  I've resynced and shut down my phone and that didnt help.
    iPhone 4

    Beer,
    is that when you want to play music over the air (airplay) like BT headset or something?
    because i am facing the below issue in my car.
    the phone minimizes the volume of airplay and the ringing to 0 when connecting to a device (BT headset or car kit)
    upon disconnecting, the ringing tone remains 0 and i miss all or most of my calls.

  • Apps are missing after ios5 update

    after ios5 update on ipad2 all my apps are missing, how do i get them back?

    juliadevogel wrote:
    I have the same problem. I disconnected and synced, and I can see them in itunes,
    Disconnected from what? the computer? Did you connect to the computer again, launch iTunes and then do as I described above?
    You have selected all of the apps to sync - put checkmarks in all of the boxes next to the app names and have the Sync Apps heading checked as well?
    Do you have restrictions set on the iPad? Settings>General>Restrictions>On?
    Are you signed into the correct iTunes account on the iPad and the computer?

  • My iphone 4s and ipad 2 both with 7.0.4 update will no longer connect to wifi but non-mac lap top has no issues

    my iphone 4s and ipad2 both with 7.0.4 update will no longer connect to wifi.
    About three days ago the ability to connect came and went and the connection never lasted more than 10-15 minutes; it has not been able to connect since last night. I do not think it's my wifi router as non-mac lap top has no issues. I have seem many similar questions posted.

    Reboot your router by removing all power from it for about 15 seconds. Also, if your router still has its default SSID (such as LINKSYS, DLINK, NETGEAR, etc) change the SSID to something unique. Note that all other devices on your network will have to be reconnected if you change the name, but if the name is still the default that is most likely your problem.
    If the SSID is not the default then the reboot should fix it.

  • Music will not play after ios5 update, it still appears there but will not play...if I select a song, it jumps to another song but will not play anything.  Also, if I try to play any of the files on the phone from iTunes they won't play either...help!!

    No fix for getting music to play on iphone4 after ios5 update...
    Cannot find how to manually sync according to someone else's fix...
    If I try to play any of the songs already on the phone from the iTunes software, they don't play either...
    FRUSTRATING!!!   Please help!!!

    Hopefully Apple is trying to clean up this mess of an opperating system

  • After ios5 update, iCal week view Oct 2-8 has 2 Saturdays?

    Is anyone else having problems with iCal week view on iPad after ios5 update?
    Two major changes have occurred...
    1. Week view used to start on Monday, now Sunday (and can't change it back).
    2. If you look at the week October 2-8, 2011 there are 2 Saturdays and no Friday or following Saturday...
    Any ideas? Is this a wait for ios5.1 issue?
    Cheers
    Chris

    If you are using a Mac, go to Settings>Software Update ... check for any updates, and update all.
    Chances are you are not using iTunes 10.5, which is required to sync iOS 5.
    If youare using a PC, suggest you uninstall your iTunes, download fresh iTunes 10.5 from Apple.com/itunes and install it.

  • Have 18g of other on 3gs after ios5 update. what is this and how do you get rid of it?

    have 18g of other on 3gs after ios5 update. what is this and how do you get rid of it?

    \Based on other forum users' posts, it seems like all you need to do is Restore the phone from your latest backup, and that should "refresh" your phone's appraisal of its data storage.

  • After iOS6 update, It says cannot connect to iTunes Store when I try to go to the app store.

    After iOS6 update, It says cannot connect to iTunes Store when I try to go to the app store.
    How do I fix this on my iPhone 4S?

    Same phone and ios, same problem. Worked just fine for me Sunday, but nothing today, all day. As a workaround I found I can still connect using iTunes on my Macbook Pro, the I synch my iPhone. There are way too many people with the same problem for it to be anything but Apples problem. Hope this helps.

  • After ios5 upgrade can no longer increase font size on iPad or iPhone, any suggestions apart from getting new glasses!! Also the backlight on the iPad isn't as bright as before. Any ideas?

    After ios5 upgrade can no longer increase font size on iPad or iPhone, any suggestions apart from getting a new pair of glasses! Also, the backlight on the iPad isn't as bright as before the upgrade, any ideas?

    Hi Zak, thanks for the reply.
    The filename is whatever is set to be the background fill of the site (I presume the desktop background fill, if mobile versions are set to be different). I've tried a number of different files, sizes and types/formats and the result is still the same, so as far as I can tell it's not the file itself causing the issue...
    It uploads all pages (desktop, tablet and phone versions), .css files and .html files, and even the favicon .ico file but then hangs on the first image file, which incidentally is the background fill image.
    The total number of files is said to be 154. It gets stuck on file number 24.
    Yes the "Resume" dialog appears and upon clicking it just attempts to continue from the hang at the first image file (apparently 66% of the way through).
    Re: the "BC site has changed" part - I thought as much but figured worth reporting.
    ... Incidentally, as I've written this reply, I left the "Resume" dialog open (ie neither clicking "resume" or "cancel" and just as I've finished typing it appears to have published the site successfully?!! (I must've left it for roughly 5 minutes)
    Bizarre behaviour... I'm not sure if this will repeat itself with other sites but I'm sure there's a bug here that needs looking at regardless...?!
    Any thoughts?

  • TS3581 After installing OS 7 my iPhone is no longer recognized by car stereo even though it is hard wired in.  It doesn't even charge!  What gives?

    After installing OS 7 my iPhone is no longer recognized by car stereo even though it is hard wired in.  It doesn't even charge!  What gives?

    You clearly did not notice that you have joined a USER TO USER COMMUNITY FORUM
    This is NOT Apple ,Apple do not read nor do they  therefore respond
    So if you would like to wind your neck in ........................
    try a reset of iPhone and then a restore,best, as new and if it then functions correctly try restoring with your backup

Maybe you are looking for

  • SSL VPN Connection error with SA520

    Hi there, I have an SA520 setup and all my users can login to the SSL VPN tunnel except one user. The laptop is running windows 7 64bit and had IE9 installed. When I try to connect her to use an SSL VPN Tunnel, I get the following error: Cisco-SSLVPN

  • Hyper Editor Bug

    Hi, everythings been fine but over the last few days, i have noticed that i will be working away then all of a sudden the volume slider of the channel i'm on suddenly jumps to +2.6 db. (always 2.6) I have no idea why this has started happening and it

  • MIGO for Exciseable material..?

    Hi all Can any body tel me , i have created PO with exciseable material, and while doing MIGO under excise tab i m not getting the below things 1.Capture and post excise invoice 2.Only capture Excsie invoice 3.Refer only excise invoice 4.Only part 1

  • [b]APEX Meetup at ODTUG[/b]

    Hello, For those folks going to ODTUG, we (Monty, Bharat and a few others) are trying to arrange an APEX Meetup (if you've never been to one before it's very casual, usually in a bar - drinks and good chat). I posted a quick blog post - http://jes.bl

  • Indesign CC Crashing on launch MAC

    Hi, Indesign crashes on launch every time. It stays open for about ten seconds then crashes without pressing anything. http://pastebin.com/XwMHDNLg Any help would be great as i have work to do!