After IOS7 video quality poor on iphone4s

Hi,
anyone else noticed the video quality blurry on iphone 4s after ios7? snapped a few seconds of video out with the dog yesterday, uploaded it and its dreadfull!
never had any issues before, camera seems okay, but video quality is lousy!
any ideas? anyone else having the same?
aside from that ios 7 seems okay.
thanks

I have experienced the same problem recently, without having made any changes whatsoever to my Handbrake settings. Very strange - streaming quality went from excellent to horrible. The only possible factor, as referred to elsewhere, may be that I upgraded to 9.4v of HB. Yet, even then I did not fiddle with any settings, did not use ATV Legacy (note as problematic elsewhere), did not enable CABAC (also problematic). Verified post-conversion settings of many of my movies in iTunes and there is no difference. Network is as strong as ever. Did, however, recently upgrade ATV software - could this be a related issue?

Similar Messages

  • Video quality poor after saving

    I'm using Soundbooth CS4 on a Mac and when saving a video/audio file the video is really poor quality, blurry etc. I'm exporting using the compression guidelines for vimeo (http://vimeo.com/help/compression), as that is where I'm planning on uploading to. I've tried saving as an .mp4 and .mov and had the same problem with both. Has anyone had the same problems?

    AT&T delivers U-verse service over a fiber-to-the-node
    It is important to note this is not a cable modem as you stated. Cable modems work of Docsis technology. You have Fiber which I would take over Docsis any day. You should have very good internet. Yes 6MB Down is just fine for streaming Netflix. You can stream good quality at less if it was the case.
    The problem could be local. You mentioned the laptop is fine but the apple tv gets worse. Are both on WiFi? If yes then check the signal strength of the Apple TV vs. the PC when you see this happening. It could be possible but not likely that you are getting wifi interference. Possibly from a phone or house hold appliance. This also could depend on your country and the default channels. Try connecting the Apple TV via ethernet if you can and see then if the same thing happens.
    Good Luck

  • Video quality poor after placing into timeline, don't know why?

    I've done some screen capture with Camtasia on a Windows machine. When I import it into FCP X the quality is fine when viewing prior to placing into the timeline. After I put it in the timeline I find that while editing that the video playback is now blurry, as is the exported media. I'm not sure what's causing this, can someone help?
    Thanks in advance.
    B

    I set the Playback to High Quality and that didn't help. Thanks for the tip! I'll continue to dig into this problem. What's odd is that my first few projects with learning how to use FCP I used GoPro output and I never saw this issue, but that is HD output.
    Thanks,
    B

  • Video Quality Poor???

    the quality is poor when a third person joins the Chat.....we are all on hi - speed broadband and even tried to lower the bandwith......no luck in improving the quality.
    Any suggestions???

    Hi
    First try setting the Quicktime settings, goto sys prefs/quicktime/streaming/streaming speed set what you get from your ISP go no higher then 1.5mbps(dont use automatic)
    In ichats prefs click on video and change bandwidth limit to NONE.
    Restart iChat.
    Tony

  • Video quality poor including titles

    I purchased this product to try something different.
    I normally use another video editor.
    I love everything about the program except when it burns to DVD.
    When I burn it, the quality is horrible.
    And I've read the other forums regarding the size/resolution of the photo's.
    The quality is even poor on the titles pieces that the program itself uses.
    Any suggestions?

    [email protected] wrote:
    It would be helpful if the title said it wasn't for technical issues.
    Welcome to the Video Lounge!
    The Video Lounge is the location for off topic discussion, fun, and relaxation for the Adobe video post-production community. Feel free to post on any subject of interest here.

  • Video quality poor under iTunes 10

    I have a MacBook Pro running 10.5.8 and I downloaded and installed iTunes 10 just yesterday (Sept 1). Now videos that I purchased as recently as a couple of days ago have vertical distortion lines. I've seen that kind of distortion before, though never on a Mac and it's usually due to some sort of resolution mismatch, but that would be hardware whereas I'm pretty confident that this issue is related to iTunes 10.
    Any ideas? Does anyone know if 10.1 is just around the corner?
    Thanks,
    Rob

    I'm having the exact same problem. Watched a movie last night on iTunes 9, and it was just fine. Upgraded this morning, and watched an HD podcast I down loaded after the upgrade. It was horrid. Heavy pixelation and I had the same experience that pixelation only went away on mouse-over. I was curious and opened the movie I watched last night, the quality has dramatically decreased. Same with all previously purchased SD and HD content. I'll make no more purchases until this is fixed. Great job when one of the new features being hyped is HD TV rental.

  • YouTube Video quality poor

    Poor..

    The same video file Watched in my MacBook that looks good. But in my pad4 picture quality is not good at all. I don't know whether browser chrome problem or I pad resolution problem. Also the same Facebook video not playing in safari As It's required adobe flash player which doesn't support in iPad :( .

  • Very poor video quality after transcoding in Adobe Encore CS5.1

    MERRY CHRISTMAS AND A HAPPY NEW YEAR!
    I have very poor video quality after transcoding the video file (MPEG) in  Adobe Encore CS5.1. Below you see my used settings in my filmproject.
    The problem exists after transcoding in Adobe Encore CS5.1. I checked all steps and found out that there is no problem until transcoding. My exported file  in MPEG has very good video and audio quality.
    Facts:
    1. Camcorder: Panasonic AG-AC160AEJ
    Operating System : Windows 7, 64 Bit, Ultimate edition
    Source files: MTS files
    Recording settings (clip settings):
    Type: MPEG Movie
    Image Size: 1920 x 1080
    Frame Rate: 25,00
    Source Audio Format: 48000 Hz - compressed - Stereo
    Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
    Pixel Aspect Ratio: 1,0
    2. Sequence settings in Premiere Pro
    Sequence was created from Clip directly with settings above.
    3. Exporting settings in Adobe Premiere Pro:
    Match sequence settings was activated. Now other changes were set.
    4. Exported File:
    Video
    Image Size: 1920 x 1080
    Data Transfer Rate: 25920 kBit / s
    Frame rate: 25
    Audio:
    Bit rate: 384 kBit / s
    Channels: 2 (stereo)
    Frequence: 48 kHz
    5. Transcoding settings in Adobe Encore:
    I used different transcoding settings such as automatic DVD Transcoding, CBR and VBR.I also set “use maximum render quality”. But all results were always the same: very poor quality.
    Why does the encore transcoding cause such bad video quality?
    How can I solve this problem?
    Please help me soon.
    Best regards.

    Hi Ann,
    1) I did not only „Automatic (based on source)“ options in my tests, but also many other customized options.
    The results are very poor. I have done a new test with the following settings. The result is also poor:
    Download link: http://www.klavierlehrer-bayern.de/download/test_mpeg2dvd_1.m2v
    Export Settings:
    Format: MPEG2-DVD
    Preset: Custom
    Codec: MainConcept MPEG Video, Quality: 5
    Frame Rate: 25 fps
    Field Order: Upper
    Pixel Aspect Ratio: Automatic (based on source)
    Render at Maximum Rate: [active]
    Bitrate Encoding: VBR, 2 pass
    Minimum Bitrate (Mbps): 5
    Target Bitrate (Mbps): 9
    Maximum Bitrate (Mbps): 9
    GOP Settings
    M Frames: 4
    N Frames: 12
    Use Maximum Render Quality: [active]
    Multiplexer: None
    2) Why shouldn’t I use the “Match Sequence Settings” in exporting? Because of the big output file size?
    I used it and the results are very good as I expected:
    Download link: http://www.klavierlehrer-bayern.de/download/test_MatchSequenceSettings.mpeg
    Export Settings
    Match Sequence Settings [selected]
    1920 x 1080, 25 fps, Upper, Quality 50
    User Maximum Render Quality: [active]
    3) I tried also Dynamic Link in PremierePro (to Encore).
    The results are also poor.
    4) I will test also LagarithLoslessCodec and frameserving +DGMPGDec. But the video is vertical long drawn-ot.
    I think I did not use it correctly. 
    Regards

  • After ios7  update, I could not snap photo or take video from my iPhone4

    After iOS7 update for my iphone4 I could not take video or snap photo.No way to navigate to photo or video shot button.No camera support is shown in apps that use camera.Could any one help me urgently please?

    Lovifopharm wrote:
    After iOS7 update for my iphone4 I could not take video or snap photo....
    Try This...
    Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430
    Lovifopharm wrote:
    ... No camera support is shown in apps that use camera.
    Check in Restrictions...
    Settings > General > Restrictions
    Understanding Restrictions  >  http://support.apple.com/kb/HT4213

  • Poor Video Quality after Streaming

    Dear all,
    We have been provided with a number of .mpg files from a
    client and we have streamed then into Flash, using the usual
    settings. When streamed however, the resulting video is of a poorer
    quality than the original file.
    Just wondering if anyone had any ideas - we are probably
    doing something wrong, but we've tried a number of various options
    when importing.
    Any advice greatly appreciated.
    The videos produced may be seen at:
    http://www.atomicwebsolutions.com/foodesign07test/reel.asp
    Many thanks
    Dave

    Hi B,
    We used - at encoding screen:
    Profile - Custom
    Video Codec - tried On2 and Spark
    Quality - High
    Frame Rate - Same as Source
    Key Frame Placement - Automatic
    We used similar settings for .WMV files in the past and the
    video quality was fine, but with .MPG files, the resulting quality
    is much less than the original.
    Best wishes
    Dave

  • Poor video quality after rendering or publishing iMovie video - Problem?

    After completing production of an iMovie video and then publishing it, the video quality is absolutely horrible. Is the normal or am I doing something wrong?

    I hope the iMovie programming team at Apple is READING THESE POSTS, plus the other threads complaining of the lousy quality that results when interlaced video (480i or 1080i) is imported into iMovie '09 (even with all the recent updates). Various folks and e-book authors have posted workarounds, but these are cumbersome and defeat the entire purpose of iMovie -- which should be a simple and elegant video editing solution. Millions of users have interlaced video which they would like to edit (for you novices, you're affected if your video was shot on mini-DV tapes, or the HDV format -- plua many other non-tape formats also use interlaced video, so check your camera's specs).
    Apple, PLEASE ADDRESS THIS GLARING FLAW in iMovie '09. It's absurd that iMovie 6/HD, which worked flawlessly with DV and HDV footage, is no longer supported. IMovie '09 has many great features, but what value are they if the end-product looks bad?

  • Poor Audio and Video Quality

    Using IDVD to burn iMovie containing pictures and music and am getting very poor quality audio and video. The video is very low resolution, lacking clarity and definition, and the audio comes out really flat with over-saturated vocals that is unpleasant to listen to.
    The content was made from iMovie 11, importing photos from iPhoto and iTunes music.
    I exported the movie via Share->Export Movie-> HD 1080P
    In iDVD 7.1.2 I imported the movie (actually several) into a slideshow menu item.
    I used the iDVD encoding preferences set at 'Best Performance' and 'Professional Quality' with no difference between the two
    Then to ensure it wasn't the DVD disk causing the problem, I used the 'Save as Disc Image', and validated the file image saved to disk had the same quality issues as the burned DVD.
    Then to eliminate the iMovie as the problem, ran a test and used an iPhoto slideshow in place of the iMovie, and it also has the same low quality issues.
    I have observed that using the iDVD viewing capabilities, the A/V quality is fine. Its after the burn to disk the problem occurs.
    At this point I'm not sure what to try. I'm viewing the DVD on my 50" widescreen TV using Sony DVD player.
    A year or so back I did similar steps and the DVD came out fine... the sound quality was excellent and the video quality while not outstanding, was reasonable.
    Any ideas -- I'm really stumped.

    Hi
    In iMovie'11 - I do (not use Share to iDVD)
    • Share to Media Browser - AND AS Large - NOT HD ! (result will not be better but rather WORSE)
    • In iDVD I import from Media button and Movie tab.
    Yours Bengt W

  • Update to 10.10.2 poor video quality

    After I updated to Yosemite 10.10.2 video quality became very poor, especially when using the DVD Player App. This is on an 2012 quad core I7 server model connected to a Panasonic TV via HDMI. When I reboot using 10.10.1 which is on another partition of Drive 2, unupdated, the video is perfect. I tried to use calibration in system setting/display/color with very little success. Has anyone else experienced a similar problem?

    paulfromnu wrote:
    update to 10.8.2 from 10.8, invalid checksum. What do I do?
    Try downloading the Combo updater from here
    http://support.apple.com/kb/DL1581?viewlocale=en_US&locale=en_US
    Cheers
    Pete

  • Flash Poor Video Quality in All Browsers But IE

    Hello
    I'm using Firefox 34.0.5 on Windows 8.1 and flash player of version 16.0.0.235.
    I noticed a very poor quality on the flash videos in this browser. I watched the same video on Internet Explorer, and the quality was excellent. Here is a link: http://www.adultswim.com/videos/blue-exorcist/a-flock-of-plovers/
    It is worth noting, the same video had poor quality both in Chrome in Maxthon. I could sure watch it in IE, but for some reason it stops after 5 minutes there (while the video itself is 20 minutes long).
    Please help guys.

    Hi all,
    It's good to know it's getting out there but I'm still flummoxed.  I tried reloading Firefox the newest download.  I also reloaded Adobe Flash 10 and at my computer I still get...
    I've tried refresh on the view screen which has fooled me in the past.  Otherwise don't know...
    c

  • My Iphone4 is **** slow after IOS7 please help

    My Iphone4 is **** slow after IOS7 please help

    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Try another cable. iOS 8 seem to make the iPod more sensitive to marginal cables.
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar                                                              

Maybe you are looking for

  • Bridge CS3 and error message

    On my old Windows XP with CS3, Bridge would often crash.  No pattern I could see. Recently bought a new Windows 7 PC with iCore 7 processor and installed same software.  Had the same problem as above. I also have just bought a new laptop running Wind

  • Trading Partner for open item document prior to BCS implementation

    Dear Experts, We have just introduced BCS in our company currently. One of the difficulties the user are facing is that the open item (many of them - thousand open item with different currencies and exhange rate) prior to the introduction of BCS does

  • Feature Request - Editable Illustrator Text in After Effects

    Hello, I would absolutely love it if I could convert text from Illustrator to editable text in After Effects. For most animated videos this is a pretty basic workflow that would help out so much. Right now the only solution appears to be having a "gu

  • Brush size no longer showing up on cursor

    Hi everyone. I use my brushes a lot, but I've just lost all ability to see, on screen, in real time, the outline of my brush; all I get is a cross, no matter how big or small my brush is. The same goes for my clone stamp tool, as well as my dodge and

  • New to mac, mail doesn't work

    just got my first mac,tried to set up mail. i can bring up the mail with user id but it doesn't accept my password. any way to reset it, or any ideas? imac   Mac OS X (10.4.7)