After iTunes 11 install songs pause intermittently...

All songs installed prior to upgrade/update work fine. Only those songs installed after update to iTunes 11 pause intermittently please help. I Know There  has to be a simple Solution. Please help! I'm on a Mac Mini 2011 running OS lion.

I am pleased that I am not alone.  I have disabled Kaspersky as it too seems to crash on a complete system scan.  So far the system is stable again.  I have a support request in with Kaspersky from 2 days ago and am still awaiting a response.  This is the kind of thing I get in the log files (latest below).  Can anyone read these as it is a step too far for me
TIA  N
Tue Dec  4 09:49:46 2012
panic(cpu 6 caller 0xffffff802beb7bd5): Kernel trap at 0xffffff7fae194439, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x0000000000000800, CR3: 0x0000000045505039, CR4: 0x00000000000606e0
RAX: 0x0000000000000000, RBX: 0xffffff81fce76000, RCX: 0xffffff81fce767e8, RDX: 0x0000000000000200
RSP: 0xffffff81fe9a3d00, RBP: 0xffffff81fe9a3d60, RSI: 0x000000008003f000, RDI: 0xffffff81fce76000
R8:  0xffffff81fe9a3c20, R9:  0x0000000000001000, R10: 0xffffff8068b2c2b0, R11: 0xffffff8068b2c280
R12: 0xffffff81fce76000, R13: 0x000000008003f000, R14: 0xffffff81fce76000, R15: 0xffffff81fce767e8
RFL: 0x0000000000010246, RIP: 0xffffff7fae194439, CS:  0x0000000000000008, SS:  0x0000000000000010
Fault CR2: 0x0000000000000800, Error code: 0x0000000000000000, Fault CPU: 0x6
Backtrace (CPU 6), Frame : Return Address
0xffffff81fe9a39a0 : 0xffffff802be1d626
0xffffff81fe9a3a10 : 0xffffff802beb7bd5
0xffffff81fe9a3be0 : 0xffffff802bece4ed
0xffffff81fe9a3c00 : 0xffffff7fae194439
0xffffff81fe9a3d60 : 0xffffff7fae1947f8
0xffffff81fe9a3e10 : 0xffffff7fae18f428
0xffffff81fe9a3e50 : 0xffffff802c151530
0xffffff81fe9a3ea0 : 0xffffff802c19b2ce
0xffffff81fe9a3f00 : 0xffffff802c1a17b5
0xffffff81fe9a3f60 : 0xffffff802c1e1533
0xffffff81fe9a3fb0 : 0xffffff802becea1d
      Kernel Extensions in backtrace:
         com.kaspersky.kext.kimul.42(42.0)[658C1759-7925-7346-A10D-B468C1BD7A1D]@0xfffff f7fae18d000->0xffffff7fae196fff
BSD process name corresponding to current thread: kav
etc etc.

Similar Messages

  • Iphone 4S is not recognized by windows 7 after itunes 11 install

    The driver will not install correctly for device, iphone 4s, after itune 11 is installed.  The iphone is therefore never recognized by windows 7.  I using the usb-iphone cable.

    See this tip: http://support.apple.com/kb/HT1923. If you didn't use all of these steps to remove and reinstall iTunes you should do it this way. Note that the installation requires Administrator privileges to remove and install.
    Also, if you are using a USB hub for the iPhone connection, try a USB port directly on the computer.

  • Can't find iTunes Library on external drive after iTunes 8 install

    My music library (50GB) has always been on an external drive. After installing iTunes 8 I went to preferences to change from default to this drive but nothing showed up. The complete library is still on the disk. Tried reinstalling V 7 but still no luck.
    Any ideas how to "reconnect" the library ?
    iPOD is also still complete. Is there a reverse recovery that my iPOD content could be retrieved to my external drive as the library ?
    Message was edited by: samben52

    Changing the Library location within iTunes instructs the program were to store future music when Importing - not where to go look for current music.
    You music files may be on the ExHD, but your music metadata (Playlists, Playcounts, Ratings, and other potential important attributes) are kept in the Library Database file. See: What are the iTunes Library files?
    If you did not save a copy of this file, you may be in for a long recovery.
    This well-written iLounge Article is a must-read for anyone who wants/needs a better understanding of how iTunes manages your music. It may shed some light on what you need to do next. or at the very least, help you describe your specific problem here a bit better.
    Also see: Managing your iTunes Library on an External Hard Drive
    Best of Luck

  • CD drive disappearing/not reading after iTunes 7 installed.

    anyone else had this pickle?
    After I installed iTunes on this pc (P4 2.6Ghz with SiS 650 chipset) the DVD drive suddenly comes up in device manager as "not working properly" with one of those yellow exclamation points on it...no biggie: we banned the stupid kids from using their ipods on this computer.
    now the kids have their own pc...a fair bit older. after i installed itunes on it the CD drive is still active in device manager, but every CD inserted comes up as blank. (ie....the drive no longer bothers reading the disc)
    forgive me for being the slightest bit cranky at the windows implementation of itunes, but does anyone have some sort of insight regarding this matter?

    I am having the same problem. On IBM T43 laptop.
    After the upgrade to 7.2.0.35 my CD drive will read discs and I can even see it when I use file->import; but then I have to import each track individually.
    I also don't get "Play using iTunes" in the autorun window after inserting a CD that I used to get.
    Doesn't matter whether I put in an audio or movie CD/DVD only windows media options are shown to me.
    This is very annoying especially since one of my recent purchases has 45 tracks on it.
    IBM Laptop Windows XP

  • Multiple apps not working after iTunes 6 install

    ITunes 6.0 and QuickTime 7.0.3 were installed by Automatic Software update. Since then multiple apps including Safari, Mail, and all Dashboard Clients. At first System Preferences was working but has since stopped. All seem to start up but stop after just a couple seconds with the message "The application XXX quit unexpectedly" I have run Disk Utilities Repair Disk Permissions and Repair Disk, from the hard drive and Install DVD. I can't find all the preference files (for Safari and Mail at least). What to do next?

    I second this problem. Although I'm not sure what it relates to (if it's the download of iTunes 6.0, or something else), I too am experiencing problems with many different applications quitting unexpectedly. The problem was initially seen when I inserted a DVD to watch, and DVD Player quit. I thought that there might be some new software I could download (which there was... DVD player 4.6), so I downloaded the new software, but the installation application kept quitting. Also, "Software Update" quits unexpectedly, which I found when I tried up update to Mac OS X (10.4.2) from simple 10.4 using that application.
    To Steven - sorry that I cannot offer any advice, but can only share with you in your question of What to do next.

  • Problem After iTunes Update Installed

    Software Updates did its automatic check and I noticed the window on the desktop that said there was an update.  I looked at the details and I thought it said itunes update 10.6.3.  I read the details and installed it.  After it installed, I restarted the computer and befor the aple appeared but there was still the gray screen I did NOT hear the tone.  After about 30 seconds the apple appeared and the gear and it booted to the desktop.
    I looked at the version of iTunes by going to About iTunes and the moving box said (althought it was really small this time) but I checked it again and it said 10.6 (4.0).  However, I thought when the Updater said there was a newer version of iTunes, I thought it said version 10.6.3, with no paranthesis.
    I restarted the MacBook Pro again, and still there was no tone but the gray window was present for about 10 secs then the Apple, and it booted to the desktop.  I thought I should get a tone so I shut the MacBook Pro down and pressed the Power button to boot up in Safe Mode, but I did not hear the tone so I did not press the Shift key.  I checked the version of iTunes that was installed (assuming a newer version was installed) and it is 10.6 (4.0).
    I tured the computer off and tried to do a SMC Reset.  I turned the MacBook Pro of left for a couple hours, came back, plugged the MagSafe Adapter in and tried to boot up the computer, no tone heard, the gray screen appeared for about 20 secs, then the Apple, then the gear and it booted to the desktop.
    Something has been recently occuring.  when I plug in the MagSafe Adapter initially, next to the battery up in the menu next to the Bluetooth icon it says "Not charging" but after about 5 secs it has the charging sign in the middle of the battery.  Not sure if this is related or what.  I tried to do an SMC Reset when I saw this "Not Charging" when I plugged in the Mag Safe  but it did not change anything as far as when I plug in the Mag Safe Adapter it still initially says "Not Charging" for about 5 secs and then it goes away.
    I am concerned what to do about hearing no tone and the version of iTunes I thought it said it was going to install but when I checked About iTunes it says 10.6 (4.0)
    any help in this matter.  I am not the best when it comes to computer knowledge.
    thanks

    Your explanations have clarified some things (including one misconception I had from not reading your post carefully enough -- I thought you had "hard shut down" by holding down the power button, no in rereading your post, it sounds like you did not do that but rather shut down in an orderly way, that was my misconception).
    I too was not aware of the Magsafe Power Supply issues, but it sounds like you would be well off to use that settlement check to obtain a new one. Hopefully that will resolve the charging issues you saw. I work somewhere where there are literally hundreds of Macbook Pro and Air laptops, all with these Magsafe adaptors, and I haven't seen any such complaints, but perhaps yours was part of a bad batch, it sounds like you're not the only one. (I have seen such chargers just wear out after 4-5 years, but then they just stop working altogether, versus the "charging/not charging" business you were seeing.)
    I am going to surmise that none of the Magsafe issues have anything to do with iTunes because iTunes is just an application that is not related to the way the laptop charges. I suspect it is a coincidence that the iTunes update happened around the same time. The Magsafe behaviors probably would have manifested themselves even if you had not done the update.
    Is your sound working in iTunes? Do you still not have boot up sound? If the answer to both of these questions is yes, you may want to read this Apple article  http://support.apple.com/kb/ht1379  and consider doing a reset of your PRAM and/or NVRAM. I noticed that PRAM does control some sound settings and "attention tones" of the computer (which might include a startup tone perhaps).  Something to consider, it's hard to offer advice in these cases without being there in person to observe things. Good luck with all this.
    Before you do any resets on PRAM or NVRAM, do re-check your sound settings to confirm that the mute box is not checked. When my Macbook Pro mute box is checked, I get no startup chime also. You might consider checking the mute box, restaring, then unchecking it again just to see if that matters. One last thing -- some other posts in the Discussions involved Macs without a startup chime and people got their chime back after disconnecting or fixing a peripheral that was plugged in via USB or Firewire. I don't understand why that would be, but that is what they reported -- something else for you to consider.

  • Desktop disappears after iTunes 8 install

    I installed iTunes 8, and when I rebooted my desktop was blank and my taskbar was gone. I finally was able to access system restore and go back to a prior restore point. But now iTunes 7 won't work because it says some iTunes file is a newer version. I'm running Win XP SP3.

    In order to get this to work, I had to completelyy uninstall both iTunes and Quicktime. You can do this from Control Panel-Programs and Features. After your list of programs fully loads, select Quicktime first then click uninstall. Then do iTunes the same way. then I ensured that all references for these programs were removed from my registry. I did this by running a registry scan using the program called CCleaner. It is an awesome freeware program that scans your registry and cleans it. You can get it from http://www.ccleaner.com
    After I restarted, I then re-installed iTunes. After I ran it the first time, I followed the directions from the initial post, and all problems were solved.

  • Wifi lan failed after itunes 5 install

    after 10 atempts at getting 5 installed, our entire wifi lan locked the incoming adsl line causing and engineer to be called out who said YOU MUST HAVE INSTALLED ITUNES 5 can this be it..how can apple let this go on

    No looks to me as if there are still problems. If Apple can send me an email about music why the heck can't they just send me an email saying please upgrade as we have problems. Instead I sit there for hours and hours and phone calls and phone calls thinking it was my fault. How can they issue this software without really good testing, issue a Beta first. It is appalling and is a big blot on their name.

  • I can't see airport express after iTunes re-install

    Hey you Windows guys, my daughter uninstalled iTunes by accident.  When I reinstalled it, I can't see the Airport Express (AE) any more.  It also doesn't show up in the Airport Utility.  This is what I've done to troubleshoot and more info:
    Windows 7 - 64 bit
    Latest iTunes and utility install.
    Status light is green on the AE.
    I can access the AE from the utility software if I manually enter the IP address.
    My firewall is enabled for private and public on the follow services (iTunes, Airport Utility, Bonjour)
    All ports have access in firewall
    I can see the AE if I turn off the firewall
    So based on the last point, I'm assuming it's a firewall issue but I'm at a loss for any of trouble shooting options.
    Any help would

    OK, just some further basics, I've also tried all the resets (Soft, Hard, Factory) on the AE and still not showing up.
    Any ideas out there?

  • How to put music from ipod PC after itunes re-install without losing data

    I bought an external hard drive to transfer my music and iTunes from my pc to that to free up space. I didnt read the directions on iTunes site before copying and pasting which i thought would work.
    Did it work? kind of but i couldnt see my music in the library.
    stupidly i uninstalled and deleted everything off my computer. I then re-installed iTunes and now it wont recognise my ipod and wants to erase all my music before it can be synced.
    this is not accaptable, i dont have the time or patience to burn all my cds back onto my pc.
    How can this problem be rectified?
    I would be extremely grateful to anyone who can solve my predicament.

    You don't have to re-burn everything.
    You have two options:
    1) Use a new blank library and drag all the files from your exHD into itunes. This will lose playcounts & ratings, but if you don't care about them, it's the fastest way to get itunes back.
    2) Find an older post from forum regular, Zevoneer. It will have all you need to know about getting your ipod stuff back into itunes.

  • Not booting with external drive attached after itunes 10 installed.

    Since installing itunes 10, my computer will NOT boot into Mac OS X with the external drive attached. It consistently freezes at a grey screen with the apple logo.
    If the external drive is powered off, it will boot normally - but slowly. Anyone else with this glitch?

    AndyPeardrop wrote:
    if I forget to UNPLUG the Lacie (by pulling out the Firewire cable), when I boot the Macbook it will give me the Question Mark.
    Try opening the Startup Disk panel of System Preferences and redeclaring the startup disk. You could see this behavior if your Mac isn't sure what device to use for booting.

  • DVD READER STOP WORKING AFTER ITUNES IS INSTALLED

    FINNALLY GOT ITUNES AND QUICKTIME TO WORK BUT NOW MY COMPUTER WON'T RECONIZE MY DVD BURNER. IT DOES RECONIZE A USB EXTEROR BURNER. IF I UNINSTALL ITUNES AND QUICK TIME MY INTERNAL BURNER WORKS. PLEASE HELP

    After reading this it looks like you can either use your optical drive in iTunes but not for anything else or if your change the Registry as the document implies you can use your drive on your computer but can't burn in iTunes. Hardly seems like a fix to me. Am I missing something here?

  • After iTunes update it won't import a whole CD, only one song at a time.

    I just updated iTunes on a Win 7 64 bit system and now can't import an entire CD. Import stops after 1 or 2 songs, and I get error message "Error occurred while converting the file "(song name)". The disk is not available". I can import the entire CD one song at a time, but cannot get the whole disc to import with one command. Already tried repairing the install and a few other suggestions I found online. Nothing has helped. Any suggestions?

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    Although not directly matching your symptoms see also TS2308: iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install in case anything there is useful.
    You could also try ripping with Windows Media Player to see if the issue is specific to iTunes, or perhaps related to the drive itself or to particular discs. It is always possible that your optical drive has started to fail and can no longer seek reliably.
    tt2

  • Itunes won't open after 10.6 install

    I can no longer open itunes after a fresh install of 10.6 and a migration of settings/files from a back-up.
    Now when I open itunes I get:
    "The itunes library file is locked, on a locked disk or you do not have write permission for this file."
    My itunes library is on an external HD. I've repaired permissions and removed the itunes preference file, still no luck.
    Any help would be great.

    I don't pay any attention to updates, but last week my entire itunes library vaporized. I used my back-up disks to get my stuff back, but all the playlists are empty and itunes is crashing constantly. Just trying to click on another song or playlist causes it to "spin" and I end up force quitting. Oddly enough if I use my remote control it works better than from the desktop.
    I'm really disappointed with this whole thing, as I had never had problems with my macs like this. And someone mentioned antivirus software. Should I have that on my macs???

  • MP3 song information not retained after iTunes 7.0 - ID3 tags at fault?

    I'm having some strange problems with track information in iTunes. I first noticed it when I tried to copy some mp3's from my Mac to my mobile phone: certain tracks did not retain the song information, like artist, album etc., while others did.
    A similar problem has been discussed in this post:
    http://discussions.apple.com/thread.jspa?messageID=3698498
    However, my problem seems to be a little bit more specific.
    If I look at the music in my library in iTunes, all the track information is there. However, for MP3's encoded after 16th October last year, the "Imported With" field, using Get Info, is shown as "Unknown". Before this date, it is shown as "iTunes v7.0". For all MP3's the ID3 version is v2.2.
    I believe that I must have upgraded to iTunes 7.0.1 around this time, since I have a number of Apple Lossless audio files which have also been imported and don't show this problem.
    The main problem is with the file ID3 tag information (I think). If I select one of the problem tracks, find the original file, open it up in Quicktime and "Get Info", no track/album/artist/composer information is displayed. This is NOT true for 1) MP3's encoded before 16th October 2006 and 2) Apple Lossless files encoded at any time.
    In other words, the track information for songs encoded with iTunes 7.0.1 and later is either encoded in a way that no other application can read, OR is only being stored in the iTunes playlist, NOT the file itself. I can see all the track information for these problem files on my iPod, but NOT my mobile phone (where I have to manually copy them over), even if I drag and drop them directly from iTunes.
    I have this problem with Quicktime, my mobile phone music player and RealPlayer, so I'm assuming it's "system wide". It even occurs if I copy a problem file out of my music folder and onto the the Desktop, then manually add the track to iTunes: all the song information has disappeared.
    I have all my music stored on an external hard disk - 160GB Freecom ToughDrive formatted as HFS+. Previously it was stored on an external disk formatted as FAT32, but copying the files over to the new disk didn't change the problem.
    I considered using the "convert ID3 tags" option to see if it would make a difference, but both the good and bad files are listed as using v2.2. I also don't understand enough about them to feel confident converting them to something different - perhaps to v2.3 or v2.4 - just to see if it makes a difference.
    Any information on how to "recover" the missing information (for anything other than iTunes) would be greatly appreciated!
    MacBook Pro 17" 2.16 GHz 2GB RAM   Mac OS X (10.4.9)   iTunes 7.1.1

    Okay, some more information as I try and track down the source of the problem.
    By using an id3 tag editing program - ID3 Editor - I was able to view the song information for each track, even though all the other music players I had tried would not show it. If I then chose to modify and update the ID3 information, this would somehow modify the tags in such a way that they become readable in all other programs.
    I tried using the "Convert ID3" tags option in iTunes, just on a whim, but without any success. Saving the song information in ID3 Editor doesn't change the version of the ID3 tag - it's still listed as v2.2 in iTunes - but it DOES make it readable in other programs. I also tried the various text conversion options, again without any success.
    This looks to me like a bug in iTunes. While its possible for me to get around it, in an extremely long winded way, I still can't understand why iTunes would be writing ID3 information that other Apple programs cannot read.
    Any suggestions? Should I be posting this question in a different forum perhaps?

Maybe you are looking for