After itunes 9.2 install,160 gb ipod classic corrupted

I installed iTunes 9.2 a couple of weeks ago, and when I went to plug in my iPod to my laptop it says "Your iPod needs to be reformatted for use with Windows. Would you like to run iTunes to restore your iPod now?" Whether I click yes or just x off the pop up and open iTunes, I get another pop up that says "iTunes has detected an iPod that appears to be corrupted..." iTunes shows that an iPod is hooked up to it but I cant acces anything on it in iTunes or add any songs or anything. The iPod itself still works fine, plays all the songs etc. I know alot of people are having problems with their iPod classics and iTunes, but most of their iTunes seems to recognize their iPod and just freezes. I dont wanna wipe my iPod and start again because I've been reading people who've wiped theirs are running into problems when they try to put their music back on it. I've got like 23,000 songs on it and dont wanna wipe it and spend the hours manually putting my music on it from my external hard drives and still not have it work. Any suggestions?

Really the only thing that would very most likely work is to manually restore it. if iTunes isnt even restoring it after you click "yes" though, try reinstalling iTunes for any luck. if you can get your hands on 9.1 or some version of 8, all the better. but yes you may have to resync the entire library....a second thought would be to reset the ipod too

Similar Messages

  • I updated iTunes and now my 160 GB iPod Classic makes iTunes freeze.

    I have done everything from resetting the iPod to uninstalling and reinstalling iTunes.  I have formatted and reformatted the iPod.  The iPod actually works, I can go through and fix the settings to my liking.  But when I go to sync with my iTunes, iTunes freezes and I have to reboot the entire computer to be able to use iTunes again.  I just can't plug in the iPod.
    I have also tried a different computer, with the new iTunes and different cords as well.  This makes me afraid to even try to sync my iPhone.
    Help!  What do I do?!

    If you get a message that says Ipod_control is corrupt you should put you Ipod into Disk mode by 1st holding pressing the MENU AND SELECT buttons at the same time util the apple logo appears. Then press the SELECT button and PLAY/Pause buttons at the same time until it goes into disk mode. Once that happens connect it to your computer and you will see your Ipod as an external drive. Right click on the IPOD drive Icon and select properties, then slect tools, then select error checking, then select fix file system errors, then slect OK. Once the system files are fixed, this will take a while, your Ipod will be recognized by Itunes like it use too. I know this is a pain, but its the only thing I could figure out and it worked. Good luck!

  • ITunes 11.1.5 says my iPod Classic (160gb) full when it is not!

    I want to say that after iTunes (11.1.3?) my iPod Classic (160gb) will not sync anymore.
    I have recently updated iTunes to latest version of 11.1.5 with no luck!
    In short, I am using Windows 7 and cannot get my iPod to sync anymore.
    I keep getting the error message that my iPod is full and cannot be synced unless I clear some space...and when I say 'space' it wants
        another 20gb free to just add a few new albums that I downloaded.
    The problem is that I still have 15gb free and IT IS NOT FULL.  With a full capacity of 148gb, I have used ~130gb.  Even in the info bar it shows the correct usage of space on my iPod and shows that there IS free space.
    None of it makes any sense and it is completely in error on behalf of Apple.
    Also, I am no novice to PC's and have tried everything short of re-installing iTunes, which I refuse to do.
    My current PC build is and has the latest software and hardware available and everything up-to-date.
    Any help or suggestions would be greatly appreciated.
    If you need anymore info from me then just let me know.
    Many thanks

    First of all, let's get a few things straight.
    me too said:
    I purposely created several different threads because I wasn't sure which discussion to enter in and it is my opinion that it fit into any of these categories.
    Actually, you posted the same thing into the iPod Classic forum four times, and one additional thread in (if I recall correctly) the iTunes for Windows forum. That's impolite; at best it simply clutters up the forum with unnecessary threads, which can cause other people's valid posts to be missed in the mass; and at worst, you'll get responses to more than one of your threads which will confuse, not just you, but anyone trying to help you. I've seen it happen.
    I'll ask again, please refrain from multiple posting.
    me too said:
    I am also aware that the "other" is my album art.
    No it is not.
    There is always a small amount of Other on an iPod, but large amounts of Other indicates data that has become corrupted and cannot be used by the iPod.
    Your screenshot, which finally confirms the actual message you are getting, suggests that despite what you may believe, you are trying to Sync at lest 22GB of media to your iPod. One album in .wav form would only take up about 700MB, so you have to work out what else is set to Sync. Check the photos pane (just along from Summary) to make sure that there isn't an album of photos set to Sync. Also check the other panes as well, for Podcasts, videos etc. that you may not have realised are set to Sync.
    If all else fails, start taking music off your iPod, so that this unknown media can be put on. That way, at least you will be able to see what is being put on that you didn't know about. Then, you can take that off and put back on only what you want.
    Let me just make a final suggestion: your comment ...
    "None of it makes any sense and it is completely in error on behalf of Apple."
    ... isn't going to help you in any way. Stop blaming Apple and look for the actual problem. Once you find the problem, and can therefore see the cause, then - if you must - you can blame someone.

  • HT1386 160 gb iPod Classic says it must use iTunes 9 or later.  120 gb iPod Classic (wifes) is on 8.0 and doing fine.  If I install iTunes 9, will both iPods be o.k.?  Will any music be lost?  THANKS

    160 gb iPod Classic says it must use iTunes 9 or later.  120 gb iPod Classic (wifes) is on 8.0 and doing fine.  If I install iTunes 9, will both iPods be o.k.?  Will any music be lost?  THANKS

    You can either burn it to a CD or DVD from within iTunes, or back up the entire iTunes library as you would any other folder.
    (84357)

  • I am confused.  Is there currently a way to transfer 160 gig ipod Classic music to another computer of mine after my hard drive crashed? it has old limited library already on it?

    I am confused.  Is there currently a way to transfer 160 gig ipod Classic music to another computer of mine after my hard drive crashed? it has old limited library already on it?

    See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
    https://discussions.apple.com/thread/2452022?start=0&tstart=0
    B-rock

  • 160 GB iPod Classic just started skipping songs. Is there a fix?

    My 160 GB iPod Classic worked flawlessy for about two years and now has begun to skip songs. Always after the same playing time from zero to around 48 seconds. About 5% of the songs skip, but the list is growing and it seems to happen at random. I am on iTunes 9.2.1 (5) on my iMac running Tiger OSX 10.4.
    (I also have an older 60 GB iPod that is working fine). I have read many strings by this community concerning  this problem and cannot seem to find a good solution here. It seems like some sort of corruption issue.  My iTunes library seems to be fine. If I delete an album from the iTunes library and then synch the iPod Classic to delete the same album from the iPod Classic then re-burn the album to iTunes and then resynch the iPod Classic, the album plays just fine. Of course, I do not wish to hunt and peck for all the bad songs in order to clean them up, especially if more corruption is going to happen. This is a maddening problem as many of you know. It drives me nuts and ruins my enjoyment of my music with this 160 GB iPod Classic.
    My music is all in the AAC audio file format and I have about 8700 songs, some 25 music videos, 25 podcasts and thousands of photos taking up around 63 GB of space on my iPod Classic.  I sure wish that everyone who is having this skipping problem can band together and get a voice at Apple for some help.
    The iPod Classic was a joy for about two years - and now - has become an aggravation.

    Here I am submitting possible causes and solutions for my own problem. Possible root cause of skipping may be the use of a headset cable having a TRRS connector male plug having 4 conductor rings and 3 insulator rings. My problem started when I began to use an AKG Q460 headset which has this connector. Same TRRS plug may be found on iPhone headset or many other headsets having an active switch control in the cable. I think this headset plug may have caused corruption of digital song data when I actuated skip to next or previous song or possibly even when I increased or decreased the volume which is an incrementing pulse control signal. I went back to the headset cable having the same TRS connector as found on the Apple original headset and on my Sennheiser headset and there is even a short TRS cable that comes with the AKG headset. The problem seems to have gone away. No new skipping songs have occurred since using the TRS connector. You can learn more by searching on TRS connector on Wikipedia.
    Fixing the corrupted songs was accomplished as follows: 1) MARK the corrupted song as a one star rating on the iPod. 2) Synch the iPod and then when synch is complete, DELETE the marked songs into the trash. 3) Synch the iPod again to remove the corrupted songs from the iPod. 4) Drag the songs out of the trash to the desktop. Then drag the songs back into iTunes. Remove the one star rating. 5) Synch the iPod once again to restore the uncorrupted songs. Fortunately, the iTunes version of the song does not get corrupted when synching the iPod. So far, this has worked fine. I even had one corrupted music video which was repaired with this method. Comments are welcome, especially regarding the TRS vs TRRS connector theory.

  • 160 GB Ipod Classic - data transfer problems

    Hi I have a 160 GB Ipod Classic that I have been using to transfer large amounts of data files back and forth between home and work. I had a PC laptop at home and originally had the Ipod formatted for PC, but recently bought a new Mac Book Pro and reformatted it to MAC. Now when I try to hook up to a PC at work it will not recognize the drive and wants to format it to PC.
    Is there anyway around this? I could reformat it back to PC and still use it on the MAC, but I like to have it formatted to MAC so that software updates occur when I hook it up. I am trying to make the jump and live in Mac-Utopia...:)
    Also, I now have the Itunes library transfered to the MAC
    Any help out there would be much appreciated.
    Thanks
    Mark

    Is there anyway around this?
    Not without installing software such as HFSExplorer or MacDrive onto the PC.
    (37945)

  • My Itunes locks when I connect my Ipod classic. I have the latest version of Itunes as of 10/31/11.  Any fixes???

    My Itunes locks when I connect my Ipod classic.  I have the latest version of Itunes as of 10/31/11.  Anyone have any fixes?

    Close your iTunes,
    Go to command Prompt -
    (Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
    (Win XP SP2 n above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
    In the "Command Prompt" screen, type in
    netsh winsock reset
    Hit "ENTER" key
    Restart your computer.
    If you do get a prompt after restart windows to remap LSP, just click NO.
    Now launch your iTunes and see if it is working now.
    If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
    Apple software on Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/TS4123?viewlocale=en_US

  • My itunes freezes whenever I connect my ipod classic

    Hello, I have a 7th gen 160 GB ipod classic, the latest version of itunes (10.6.3), and I've been having a lot of problems trying to put music on it lately.
    Whenever I try to connect it to the computer, my itunes just freezes up and I can't do anything with it (this happened when I tried it on another computer as well). When I disconnect it, my device appears on itunes for a split second and a message pops up saying something like "The ipod cannot be synced, the required folder cannot be found".
    The day before this happened, I had problems with itunes freezing and that message popping up, but I could still put songs on there in between the freezing spells. I've tried uninstalling and reinstalling itunes, starting itunes in safe mode, resetting my ipod while it was connected, almost everything except for restoring it. I'm afraid that if when restore it and all the music on it is gone, itunes will continue to freeze and I won't be able to put the music back on.
    Also, I have Windows Vista. Should I try to scan and repair it when the window pops up, and then restore it? Does anyone have an alternative option, or do I have to restore it to fix it? Will restoring it fix the freezing? Does anyone else have this problem? I'll be very grateful to anyone who can provide a solution. Thank you for your time.

         If your not afraid of losing your songs and everything else on your ipod try this  http://www.youtube.com/watch?v=zLX81c5KZ_I  
         do everything he says but before plugging it in, put your ipod into disk mode by pressing and holding the select and menu buttons for 6-8 seconds, and when the screen switches immediatly press and hold the select and play buttons for the same amount(it should show a check mark/ok to disconnect.) 
         And for step two on the video, scan it, he says not to but thats when mine worked is when i scanned it. one box should be checked in the scan(the one checked by default).  Then follow the instructions on the video.
    Also to add, mine fixed and worked untill i plugged it in and tryed adding more songs.  I also did something undisclosed out of anger.  So if mine doesn't work I wouldn't be surprised.  Yours should.

  • Case for 160 gb iPod Classic???

    Been everywhere (including the Apple Store) looking for a plain, simple silicone case for a 160 gb iPod Classic. This is the OLD style, and dimension iPod. It is thicker than the new (7th gen) 160 gb iPods. I can't even figure out how to word the google search to look for one. Anyone know where I can find them?
    MANY thanks in advance-
    Blue skies-
    Jeff

    When you did the Reset, did the Apple Logo comes ON and asked you to select the preferred language?
    Charge your iPod for at least 2 hours.
    After charging till full charge, preferably 4 hours
    Toggle the Hold switch, make sure you dont see the red mark when you do the  next step
    Reset the iPod -> Press Menu and Center button simultaneously for about 10 secs till the Apple Logo comes ON
    Then release the buttons
    Select your preferred language.
    Here is the Apple support Article on the 5Rs
    http://www.apple.com/support/ipod/five_rs/classic/
    Good Luck!

  • After following the instructions to reset my ipod classic i am confronted with a red cross. Does anyone know how to remove this?

    After following the instructions to reset my ipod classic i am confronted with a red cross. Does anyone know how to remove this?

    Hello theplantman5,
    Thanks for participating in the Apple Support Communities.
    If your iPod only shows a circle and cross (or x) screen after resetting or restoring it, try placing it in Disk Mode and restoring it.
    Restore iPod from Disk Mode
    Disconnect iPod from your computer.
    Manually put iPod into Disk Mode.
    Open the latest version of iTunes and connect iPod.
    Restore iPod.
    If these steps don't work, or you've already completed them, your iPod may need service:
    Setup Service for iPod
    If you cannot force your iPod into disk mode and restore it, then your iPod may need service. Click one of the links below to setup an iPod Service Request online or make a reservation at the Genius Bar before visiting your local Apple Retail Store.
    Apple Retail Store
    iPod Service Request Online
    You can find the steps above in this article:
    iPod Displays a Red "X" Icon - Apple Support
    All the best,
    Jeremy

  • When i connect my 160 G ipod classic to my computer, the computer says ipod should be formatted before use.

    when i connect my 160 GB ipod classic to my computer, the computer says ipod should be formatted before use. what could be wrong

    Hello mimward,
    It sounds like Windows can see your devices, but iTunes is not seeing them. I would use the troubleshooting in the following article named:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

  • 160 GB IPod Classic : Sound Distortion?

    Recently, I purchased a 160 GB IPod Classic from Wal-Mart. Once I got home and synched my notoriously large music library onto it, I immediately noticed a huge difference in the sound quality.  The kicks and snares were ugly, and the bass was even more disgusting! All of my favorite songs were so distorted.  At first I assumed it was the headphones, so I tested them out on my ''ex'' 8GB IPod Touch to compare - and everything was perfectly fine (and better).
    I searched my issue online and seen many buyers like me having the same exact problem, and most of them purchased their IPods in 2009-2010!  How can a problem like this go unsolved for so long? Why wouldn't Apple change/fix the software to be up with the newer generation's standards if they are still for sale today? There has to be someway this could be fixed.
    So all I want to know is if I really wasted $249 on a device so worthless? I only bought this product for the 160 GB of memory since I couldn't fit all of my music on my IPod Touch,  and now I feel robbed.

    Music post 2008 ish is recorded into an MP3 file at higher volumes than prior to that era.
    Modern DAC (digital to analogue converter) can deal with this increase in volume (earlier albums, particularly those ripped from 1980's CDs) will sound quieter.
    Unfortunately the DAC in the ipod classic hasn't been updated from one of the early versions.
    What I've done for some recent purchases, is run them through this volume levelling software:
    http://mp3gain.sourceforge.net/download.php
    There is an equivalent version for the Mac.  They are identical in operation, and one version is no better than the other.
    I reduce the volume by about 10% on a whole album, even if it's only 2 or three tracks that are distorting.
    Remember to keep a copy of your original files for safety.
    The quality of the music does not degrade, and I'm really fussy and have $300 senheiser IE80s.  It's just the volume that is reduced so it doesn't upset the iPod classic DAC.
    However, there's no getting away from it, that this is a REAL PAIN, and there should be NO EXCUSE for apple selling such an inadequate product.  It shouldn't be too long before the iPod touch or Nano is in the 200Gb region.  After all, they can fit 64Gb on a Micro SD card whose outer casing is smaller than my small fingernail, what are Apple waiting for?

  • Please Help - My iTunes library won't recognize my iPod classic

    My iTunes library won't recognize my iPod classic 80gb. I try doing the trouble shooting steps on apple, but they still did not work. Any help would be greatly appreciated. I'd love to add some newer music to my old iPod for listening in the car or when travelling. Thanks a lot.

    Hello dmbnewfie,
    Welcome to the Apple Support Communities!
    I understand that your iPod classic is not being recognized in iTunes when you connect it to your computer. I know you have tried some troubleshooting on the Apple website as well, but without knowing which steps you have completed, I would suggest working through the attached iPod classic Troubleshooting Assistant. 
    Apple - Support - iPod - iPod classic Troubleshooting Assistant
    Have a great day,
    Joe

  • Do I have to use itunes to dowload music to my ipod classic?

    Do i have to use itunes to download music onto my ipod classic?? Can I use it as a removable disc??
    Many thanks
    A

    meerfisch wrote:
    Do i have to use itunes to download music onto my ipod classic??
    Yes.
    You can use it as a removable disk but you won't be able to copy music to it.
    Using your iPod as a storage drive
    B-rock

Maybe you are looking for

  • Scheduling, how does at work?

    Hi! I would like to execute commands at certain times. I know there is always cron which is good but looking for something simpler. Kalarm is nice if you are running X and sleep always work but I'm looking for something more like "at" - problem is I

  • Help with the a query -

    I have the table test1 with a date field stored as character 7 field. (which is for CYYMMDD) C - century indicator and there are 3 rows in that table for testing purposes. One of them has a value 9999999 which is a incorrect value for a given date. I

  • Question XML Publisher working with Olite ?

    Hi, Want to know if XML Publisher is supported to work with Oracle Lite? Secondly wanted to know if a customer already has license for IDS 10g and IAS 10g should they by separate license to use XML Publisher? Cheers Vivek

  • Droplets stop working in Photoshop CS2

    Droplets won't work if you uninstalled Photoshop after creating the droplet and reinstalled it to a different location than before. Some registry keys don't get removed during the uninstall and the reinstall doesn't overwrite them, which breaks the d

  • Message on using item on sales document

    Hi Experts, Is it possible to have message appear on screen when entering an item.  For example, if I enter the ItemCode "CARROTS" I would want the message "Unexpected sideaffects: Seeing in the dark" to appear. I'm sure I have seen it on a product d