After itunes locked up after CD import (scratch), It now imports half speed

I don't know if there is a "Safe" or "Limp" mode after a itunes lockup, but If someone has any ideas what could be causing this let me know. It was copying music from CD into itunes between 11-12X, but after it locked up that one time, after I rebooted and went on to the next CD (and every one since), it copys at around 4-6X. Any ideas besides re-install ?
HP   Windows XP Pro  

Microsoft Windows XP Professional Service Pack 2 (Build 2600)
HP Pavilion 061 DM181A-ABA a305w
iTunes 6.0.3.5
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
LowerFilters: AFS2K (3.1.21.0),
UpperFilters: GEARAspiWDM (2.0.4.3),
Video Driver: Intel(R) 82845G/GL/GE/PE/GV Graphics Controller\Intel(R) 82845G /GL/GE/PE/GV Controller
IDE\DiskWDCWD400EB-11CPF0_____________________06.04G06, Bus Type ATA, Bus Address [0,0]
IDE\CdRomSONYCD-RW__CRX215E5____________________6.1G___, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
D: SONY CD-RW CRX215E5, Rev 6.1G
Audio CD in drive.
Found 13 songs on CD, playing time 39:56 on Audio CD.
Track 1, start time 00:02:32
Track 2, start time 03:28:27
Track 3, start time 04:35:70
Track 4, start time 08:29:10
Track 5, start time 12:07:45
Track 6, start time 13:43:32
Track 7, start time 17:41:27
Track 8, start time 20:17:37
Track 9, start time 23:44:35
Track 10, start time 25:43:25
Track 11, start time 28:50:20
Track 12, start time 32:45:07
Track 13, start time 35:48:45
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 4 16 32 40 48.
The drive CDRW speeds are: 4.

Similar Messages

  • ITunes locks up frequently during importing process

    Problem started after successfully ripping about five CDs. Purged the start up sequence of programs that may have been intruding on the iTunes signal and that worked for a good spell. After ripping about 1300 songs, the problem started again and I'm getting tired of rebooting. I've tried the uninstall-reinstall option with no luck.

    I just downloaded Itunes 7.4.1.2 and have been debugging freeze-ups (hard ones that require a full system reboot)as well.
    Old or new CD's doesn't seem to make a difference.
    Error correction or or off: no diff
    EZDC creator 7.5 removed: no diff
    All extraneous programs stopped (including AV): no diff.
    New memory in my PC: no diff.
    All other ripping software works OK (EAC, WMP, creative labs)
    Then I changed from the AAC 256 Mbps encoding method to MP3 (320 Mbps) and so far, it hasn't frozen.
    BTW, here's my CD diagnostic output.
    +Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)+
    +NVIDIA AWRDACPI+
    +iTunes 7.4.1.2+
    +CD Driver 2.0.6.1+
    +CD Driver DLL 2.0.6.2+
    +LowerFilters: PxHelp20 (2.0.0.0), drvmcdb (1.0.0.1), Cdr4_xp (7.5.0.47),+
    +UpperFilters: Cdralw2k (7.5.0.47), pwd_2k (7.5.0.47), GEARAspiWDM (2.0.6.1),+
    +Found aspi32 running.+
    +Current user is an administrator.+
    +Video Display Information:+
    +RADEON 9600 SERIES+
    +RADEON 9600 SERIES - Secondary+
    +Connected Device Information:+
    +Disk drive, MAXTOR ATLAS10K5_147WLS SCSI Disk Device, Bus Type SCSI, Bus Address [0,0]+
    +Disk drive, QUANTUM DS10W SCSI Disk Device, Bus Type SCSI, Bus Address [1,0]+
    +Disk drive, Apple iPod USB Device, Bus Type USB+
    +Disk drive, Generic USB CF Reader USB Device, Bus Type USB+
    +Disk drive, Generic USB MS Reader USB Device, Bus Type USB+
    +Disk drive, Generic USB SD Reader USB Device, Bus Type USB+
    +Disk drive, Generic USB SM Reader USB Device, Bus Type USB+
    +Disk drive, Maxtor 3200 USB Device, Bus Type USB+
    +CD-ROM Drive, PLEXTOR DVDR PX-708A, Bus Type ATA, Bus Address [0,0]+
    +Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.+
    +D: PLEXTOR DVDR PX-708A, Rev 1.12+
    +Audio CD in drive.+
    +Found 12 songs on CD, playing time 51:16 on CDROM media.+
    +Track 1, start time 00:02:00+
    +Track 2, start time 03:09:29+
    +Track 3, start time 07:48:07+
    +Track 4, start time 13:46:36+
    +Track 5, start time 17:10:22+
    +Track 6, start time 21:26:26+
    +Track 7, start time 27:08:69+
    +Track 8, start time 30:28:54+
    +Track 9, start time 35:02:43+
    +Track 10, start time 39:13:30+
    +Track 11, start time 43:41:16+
    +Track 12, start time 47:17:14+
    +Audio CD reading succeeded.+
    +Get drive speed succeeded.+
    +The drive CDR speeds are: 4 8 16 32 40.+
    +The drive CDRW speeds are: 4 8.+
    +The drive DVDR speeds are: 4 8 16.+
    +The drive DVDRW speeds are: 4 8 16.+
    +Writing CD text is turned on in the preferences. If you're having problems burning CDs, try turning this preference off.+
    --Dale

  • HT4913 iTunes locks up after I add the computer to Match

    iTunes locks up after I add the computer to Match.  I have to End the Process from the Task Manager.  When I reopen, it says Match encountered an error and I should Sign out and sign back in again.  I have done this numerous times and no luck.  I have run a repair from the Programs screen.  I have uninstalled and reinstalled iTunes.  This is a new computer runing Windows 7.

    I had the EXACT same problem. My 60GB video iPOD was stolen, so I went and bought a new 80GB. I plugged it in, and BAM, iTunes is frozen!
    I fixed it. I'm not going to say that this is the best way to do it, but it worked, so, use this solution at your own risk, I hope it helps some people out.
    1. I did a file search of my entire computer for "itunes" and it came up with 292 results! Everytime I had downloaded it, copied it, transferred info from 1 computer to another, another copy was made. I don't know for sure, but I believe there was a conflict between 1 or more copies of iTunes, and it didn't know which program file to use, so it just locked up.
    2. I copied all of the music that was in my "iTunes music folder" in My Music for a back up and named it something that didn't contain "iTunes", since anything you downloaded from the iTunes store can only be downloaded once.
    3. I followed the file path for EVERY file that had anything to do with iTunes, and manually put it in the recycle bin- I mean program files, short cuts, everything. The exception is (& I stress this) the copy of your iTunes folder you just made has your podcasts, etc which will show up in your search. Make sure you recognize this and DO NOT delete those files. I also deleted anything that had to do with the previous iPOD. There are a few of them. That resolved any conflict I had with the previous one.
    4. I then emptied the recycle bin & restarted the computer.
    5. Go to Apple.com and download the new iTunes.
    When I opened it up, it showed NO music, as it should. I went to "Import folder", found the folder that I copied from the iTunes music folder and clicked ok. 3 1/2 hrs later, I was transferring 8889 songs, videos, podcasts & movies to my new iPOD.
    Think about each step as you do it, so you don't jack it up but it worked for me. Hope it does for you too.

  • ITunes locks up after adding just 1 song

    My upgraded, removed, and readded iTunes locks up after adding just one song. It just stops responding. Then I have to turn it on over and over again just to get music on the thing. Can someone help me?

    There are lots of reasons why this might happen.
    One quick thing to check,
    Edit > Preferences > Advanced tab > Importing tab
    What's your setting for "use error correction when reading audio cds"?
    Change it the other way of what it is now, and try importing again.

  • HT1473 Why after updating my itune i can no longer import LP's from my ion Turntable can sombody help please

    Why after updating itune i can no longer import vinyl to the itunes

    Ah yes school boy error there out of frustration and discontent..
    My issue is with music/apps/films etc not downloading from iTunes / App Store.
    They initially fail and message is displayed stating unable to download / purchase at this time, yet if I retry it says I've already purchased (?) or alternatively I go to the purchased section and there they are waiting with the cloud symbol..
    However some items get frozen in the download window and cannot be retried or deleted. Message appears stating to tap to retry, but even if you stole every bath and sink in the uk you'd still not have enough taps.
    I post here as the iTunes guys are useless in there 'help' and have only advised posting here or phoning apple, at my expense, to explain a problem that could be rectified by forwarding my original email to a techie. However the tech team apparently don't have an email address as they're from ye olde Middle Ages..!
    Anyways I digress.
    So I tried sync to pc, but instead of showing the file as ready to listen/use/view, the iCloud symbol shows and I'm back to square one as the item is unable to download..
    At frustration station waiting for a train from pain...
    All my software is up to date, and had all worked fine prior to the last big iOS update that resulted in all the changes in display and dismay.
    Answers in a postcard :-)
    Much love

  • Itunes locks up after Ipod Classic Sync and eject

    Windows 7. Latest rev of Itunes. Ipod Classic 80GB. Everything has been working fine for years. Now when I sync and then eject the Ipod, Itunes locks up and I have to do a restart to the computer to get Itunes working again.

    Greetings bill162,
    After reviewing your post, it sounds like iTunes on Windows will freeze after syncing and ejecting. I would recommend that you read this article, it may be able to help the issue.
    Fix unexpected quits or launch issues in iTunes for Windows - Apple Support
    Thanks for using Apple Support Communities.
    Take care,
    Mario

  • ITunes plays library at half speed after import

    After converting a performance recording tape from analog to digital and storing it in AIFF format, I imported the AIFF file to iTunes (sample rate reported as 96kHz, bit rate 2304 kbps, 24-bit stereo). The first time I played it in iTunes it was fine...but everything else in the iTunes library played at half-speed. Now (after a re-start) the imported file plays at double speed, and the library items play at normal speed.
    How can I controll this?
    I see the bit rate is much higher that library items, but don't know what is "normal range" or how to control. (I'm doing A/D in Tracktion 3, 24-bit, 96k sampling, and have many options for exporting the file as AIFF.) Any help?

    Tap the now playing screen to show the additional podcast and audio book controls.  Tap the playback speed control until it shows white.  Each tap cycles from 2X speed, 1/2X speed to 1X normal speed.

  • ITunes locks up after adding music to library

    Using the 7.5 version, everytime I add music to my library via importing from a CD, itunes locks up and I am forced to shut itunes down using the Windows Task Manager. I realize that many are having problems with 7.5, but has anyone had this problem yet? And better yet, does anyone know how to fix it?

    There are lots of reasons why this might happen.
    One quick thing to check,
    Edit > Preferences > Advanced tab > Importing tab
    What's your setting for "use error correction when reading audio cds"?
    Change it the other way of what it is now, and try importing again.

  • Itunes locks after 6 seconds while trying to play certain audio cd's

    When I try and play certain audio cd's, my itunes locks, which completely locks my pc. I've tried all of the help topics and nothing works. I've spent hours trying to fix this. I have the current version of itunes. I have used itunes for years and the problem just started recently. Please help

    no not at all, it has happened about 20 times in the last 50 cd's I have tried to play or download and every time it locks at 6 seconds, thanks

  • PE 9 lockup after HD import from camcorder

    Hi folks, I've been using PE for many years. Currently have PE9 installed, all the updates, drivers, QuickTime, etc. up to date. No problems at all, I've produced many videos. But all of a sudden on the last few times I imported from the camcorder (Canon HV20), it imports fine but when it's done, PE9 locks up. It has the video on the timeline, but doesn't show it in the video display window. I have to Ctrl/Alt/Del, which then brings up the "PE9 stopped unexpectedly" Windows error.
    When I start it back up, the video is there and saved and everything works fine. So I can work around this, but not sure why all of a sudden it's hanging after I import video, the same way I've been doing it for years? And like I said, no problems doing this with PE9 until recently. No other changes to the computer, so I'm not sure what's up, any suggestions? (I searched around in the forum but didn't find anything).
    Thanks.

    There are quite a few things to check, and many are included in this ARTICLE and in its links. For driver updates, do not trust Windows, or any update utility. Go to the mfgr's. Web site, plug in your audio, or video card make/model, plus your OS, then download and install the latest driver.
    Next, if the situation does not improve, please post the full details of your system. See this ARTICLE. Pay special attention to the I/O sub-system. This ARTICLE will give you background and tips.
    Good luck, and please report back,
    Hunt

  • Error even after re-import CD and add to iCloud

    Like others, I have many errors from iTunes match.  My collection is not very large, but I have many tracks flaged as "error".  In most cases most tracks for a CD were matched or added to iCloud.  But not ALL.  And trying "add to iCloud" always results in "Error" with no explanation.
    So I decided to try just to get a single CD to work.  I deleted all trace of the CD (The Beatles, Past Masters - Volume One) from my iTunes and iCloud.  Then imported again from CD.  I imported as 256K, then said "add to iCloud".  Even then, it matched many items, but still I have errors for 6 of the tracks.  I did it again, but imported as 128K... with the same result.
    I'd be fine if it matched some tracks, and uploaded others.  I just want the whole CD in iCloud. Is that too much to ask?
    I'm a big Apple fan, and patient, so I hope they can get this fixed.

    Hi beachy85!
    When you remove iTunes, your music on your computer (and your iPod, too) will be saved.
    Let's try this:
    Go to "Add or remove programs" in Control Panel.
    Find iTunes and QuickTime from this list, and remove them both.
    Then, download the Windows Installer Cleanup Utility to remove the remainging installation files.
    For information on the WICU, see this:
    Description of the Windows Installer CleanUp Utility
    Then, go to this page, and QuickTime (get the Standalone version, not the one that includes iTunes in the pack):
    QuickTime download
    Then, install iTunes from this page here:
    Download iTunes - 7.1.1.5
    After you've done that, restart your computer.
    Now, try opening iTunes again. Do you still get that error message, or not?
    -Kylene

  • ITunes Locks When Importing CD - 10.6.1.7

    After upgrading to iTunes version 10.6.1.7...
    I open iTunes, insert a CD, and iTunes, in its entirety, locks up. Removing the CD does not resolve the problem.
    I have found the culprit: "Automatically retrieve CD track names from the Internet."
    When this option is selected, iTunes locks up when inserting a CD. As soon as this option is unchecked, everything behaves as normal except for the fact that no CD track names are retrieved. Obviously this is a nuisance and something problematic in the 10.6.1.7 build.
    I have encountered this on two separate machines. Has anyone else come across this problem?

    Thanks for this post.  I thought that my cd drive was bad.  I unchecked the box and am now able to run itunes again.  Same version of itunes 10.6.1.7 Windows 7 Pro 32 bit.

  • Yesterday i upgrade my iphone 4s to ios 7.0.4 after my backup...now when i try to restore my back it asks passcode...i know i havent set any passcode ! i tried my iphone passcode itune passcode it still says passcode incorrect. how can i solve this?

    yesterday i upgrade my iphone 4s to ios 7.0.4 after my backup...now when i try to restore my backup  it asks passcode...i know i havent set any passcode ! i tried my iphone passcode itune passcode it still says passcode incorrect. how can i solve this? i wondered how  it is password locked ???

    http://support.apple.com/kb/HT1212

  • Photos don't get deleted after iphoto import, help

    I posted this in the iphoto forums but got not answers....
    photos remain on my iphone after have imported them into iphoto and selected 'delete originals' after import
    anyone know a fix?
    thanks!

    me too!
    Here is my setup and my steps.
    I am running iTunes v9.0.1 and iPhoto '09 v8.1 and Mac OS X 10.6.1 and a first generation iPhone.
    STEPS I TOOK
    1. I plug in my iPhone and iPhoto Launches (as expected)
    2. I see my iPhone in iPhoto under devices and it's selected
    3. I click on Import All…
    3a If I tick "Hide photos already imported" on, iPhoto does understand that the Photos have already been imported.
    4. I click on the Import All button and tick "Apply to all duplicates" and choose Don't Import so that I don't end up with duplicates
    5. After all my photos have been imported a window comes up with the message, "Delete Photos on Your Camera?" — I click on Delete Photos
    6. The photos remain on my iPhone. (Arghh!)
    I have tried to tell iTunes to "Sync photos from" and chose a small album in the hopes that this would trigger something but it only adds the small album and keeps the photos that are still on my phone that I wish to remove.
    Has anyone found any further information on this issue?
    I tried some other things.
    -I started up iPhoto while holding down the alt key and created a new Library to isolate my library
    -I created a new library
    -I chose to import
    -When prompted I chose to delete the photos from my iPhone
    THIS WORKED! (finally)
    OK, something interesting happened this time. On my iPhone, my Photo Album contains a Camera Roll (1) (in brackets there is a one, indicating one photo and next to 'Camera Roll' there is a preview of the last photo I took with the camera. It is not literally the last photo I took with the camera, in fact it is the last photo I took before updating my iPhone - I have updated my iphone twice since that photo was taken. Anyway I click on that photo and I get a blank library on my iphone. Not sure if the preview thumbnail should be there but now my iPhone is blank.
    Next I quit iPhoto.
    I relaunched iPhoto (with alt being held down so I can choose my main library - just to be sure of things)
    Now that I have all the photos off my iPhone I am happy but this deserves more testing just to be sure this isn't a sticky issue.
    Does anyone else have any other ideas on this issue?
    PS I had already tried a restore and restarted my iPhone to no avail.
    Thanks
    Message was edited by: LostAccount
    Message was edited by: LostAccount

  • HT201317 after i import my photo from iphone to pc, there's a video that i can't delete?

    after i import my photo from iphone to pc, there's a video that i can't delete? on my iphone. The video file is from my computer.

    Hi SyahirahS,
    Welcome to the Support Communities!
    If the video was synced from iTunes when you connected your iPhone to the PC, you would have to remove it the same way. 
    iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad
    http://support.apple.com/kb/ph12313
    Cheers,
    - Judy

Maybe you are looking for

  • Change default refresh rates reports

    Hi!!! In SQL Developer yo have the option to refresh a Report choosing among 5, 10, 15, 20, 25, 30, 60, 120. Is is possible to change that default values????? Thanks a lot! Jose.

  • KE51 - Maximum Number of Profit Centers

    Is there a real or practical limit to the number of profit centers we can create for PCA?  Our standard hierarchy (KCH3) has over 2100 items today and we are likely to double that over the next 2-3 years.  I do not expect to run into problems at this

  • Help with regsvr /i flash10c.ocx on Win7 x64

    I'm trying to register the Flash ActiveX control on a 64 bit install of Windows 7.  In an elevated command prompt I tried regsvr /i flash10c.ocx but get the error message "The module flash10c.ocx was loaded but the call to DllRegisterServer failed wi

  • How do I sort a bookmark into a folder initially when I want to bookmark a page?

    In firefox 4/5 you could right click the page and select "Bookmark this page" and a dialog box would popup and ask you where you want to put the bookmark. On firefox 6, when I right click and select "bookmark this page" the dialog box does not come u

  • Waking up a thread from ActionListener

    I have a Swing GUI that uses a separate class for handling the user actions(implements ActionListener). When the user clicks a button in the GUI a new thread is started that connects to a server and after sometime goes to wait(). Now, when the user c