After iTunes/Yosemite updates, custom ringtones no longer available in Contacts on Mac but are on iPhone
After updating to Yosemite, my custom ringtones are no longer associated with particular contacts on my Mac. They seem to be in the right place in iTunes (ver. 12, updated at same time), and are still assigned to contacts on my iPhone (OS 8.1)--I haven't synched contacts, but I can't figure out how to get them re-assigned to specific contacts on the computer. when they're not there to be selected. These are a combination of purchased and GarageBand ringtones, and have been in use for years. Here's what I've tried:
In iTunes > Tones: Deselecting the ringtones, syncing (connected to mac). Then re-selcting and synching again. Ringtones are still visible on the iphone in Sounds, and in iTunes, but not available from within Contacts on the Mac.
Still in iTunes, used Get Info to identify where in Finder Tones are kept, which for me is: ~/Music/iTunes/iTunes Music/Tones/. Copied all of them, moved the originals to the trash. (Did not empty.) Restarted. Didn't make a difference. I put everything back.
I have had this problem once before with an OS upgrade or new iPhone, I'm not sure which, but the de-selecting/selecting had worked. Not this time, however. My mistake may have been to update to Yosemite before updating my phone to OS8.1, but that's the way it was presented to me, and I didn't realize it would matter. My preference is to sync my contacts. But this became de-selected during the update. (Other prefs changed, also, for example--I prefer local backup, and it defaulted to iCloud.)
regarding the ringtones, i was able to set custom ringtones myself, but ever since i did that i get errors when synching my phone in the form that some app's dont work, have any of you had this problem?
Similar Messages
-
After installing the latest itunes/quicktime update I can no longer acces the itunes store nad my iphone does not complete syncing. What can I do to fix this? I have tried uninstalling and reinstalling itunes. I have uninstalled and reinstalled windows updates. I have checked the firewall settings. what else?
The problem is with version 10.4.1. I had to reload 10.3 to get it to work. The recommendation from a previous poster worked for me. Here was their list of steps:
Go to Control Panel>Programs>Uninstall
2. Uninstall the following Apple programs in the following order:
a. iTunes
b. QuickTime
c. Apple Software Update
d. Apple Mobile Devices Support
e. Bonjour
f. Apple Appllcation Support
3. Reboot PC
4. Find, Download and Install iTunes 10.3 (you can find it at FileHippo.com)
If you start iTunes now you will get an error message saying that the current iTunes library was created by a newer version of iTunes. To correct this:
5. Go to your Music>iTunes folder and delete the "iTunes Library.itl" database file
6. Within this iTunes folder find and open the "Previous iTunes Libraries" folder and locate the most recently dated "iTunes Library (date).itl" database file.
7. Copy and Paste this file back into the iTunes folder
8. Rename this "iTunes Library (date).itl" file by removing the date. It should say "iTunes Library.itl"
9. Reboot PC -
I was running the newest version of Snow Leopard, and after running Software update, I can no longer run, open, sync or use iTunes in any way. PLEASE what happened?
I really regret that I said "OK" to Software Update message... after Software Update of these updates on 7-26-11:
Migration Assistant Update for Mac
Mac OSX 10.6.8 Supplemental Update
Safari
iTunes
Remote Desktop Client Update
Now I get a message:
iTunes cannot be opened because of a problem
Check with developer to make sure iTunes works with this version of Mac OSX. You may need to reinstall the application. Be sure to install any available updates for the application and Mac OSX.
Process: iTunes [5092]
Path: /Applications/iTunes.app/Contents/MacOS/iTunes
Identifier: com.apple.iTunes
Version: ??? (???)
Build Info: iTunes-10315501~1
Code Type: X86 (Native)
Parent Process: launchd [111]
Date/Time: 2011-07-26 12:08:18.568 -0500
OS Version: Mac OS X 10.6.8 (10K540)
Report Version: 6
Interval Since Last Report: 504736 sec
Crashes Since Last Report: 20
Per-App Crashes Since Last Report: 13
Anonymous UUID: B8B5EE28-970A-4E79-949B-EA2DD6E6DAA2
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: @loader_path/libgnsdk_musicid.1.8.2.dylib
Referenced from: /Applications/iTunes.app/Contents/MacOS/iTunes
Reason: image not found
Binary Images:
0x8fe00000 - 0x8fe4162b dyld 132.1 (???) <A4F6ADCC-6448-37B4-ED6C-ABB2CD06F448> /usr/lib/dyld
Model: Macmini3,1, BootROM MM31.00AD.B00, 2 processors, Intel Core 2 Duo, 2.26 GHz, 2 GB, SMC 1.35f1
Graphics: NVIDIA GeForce 9400, NVIDIA GeForce 9400, PCI, 256 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x90), Broadcom BCM43xx 1.0 (5.10.131.42.4)
Bluetooth: Version 2.4.5f3, 2 service, 19 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Serial ATA Device: Hitachi HTS543216L9SA02, 149.05 GB
Serial ATA Device: OPTIARC DVD RW AD-5680H
USB Device: External HDD, 0x1058 (Western Digital Technologies, Inc.), 0x0704, 0x24100000 / 2
USB Device: Hub, 0x0424 (SMSC), 0x2507, 0x26400000 / 2
USB Device: iMic USB audio system, 0x077d, 0x07af, 0x26440000 / 4
USB Device: Hub, 0x0424 (SMSC), 0x2502, 0x26470000 / 3
USB Device: Deskjet D4300 series, 0x03f0 (Hewlett Packard), 0x1f04, 0x26471000 / 5
USB Device: GD-0608-U, 0x056a (WACOM Co., Ltd.), 0x0021, 0x04700000 / 4
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x04500000 / 3
USB Device: Hub in Apple Pro Keyboard, 0x05ac (Apple Inc.), 0x1003, 0x04300000 / 2
USB Device: Apple Optical USB Mouse, 0x05ac (Apple Inc.), 0x0307, 0x04310000 / 6
USB Device: Apple Pro Keyboard, 0x05ac (Apple Inc.), 0x020b, 0x04330000 / 5
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06100000 / 2
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8216, 0x06110000 / 5
FireWire Device: unknown_device, Unknown
FireWire Device: d2 DVDRW FW, LaCie, Up to 400 Mb/secSame thing happened to me and I get the same error message. These are the programs that don't work
mail
keynote
pages
all Office 2011 programs
safari -
After ios 7 update I can no longer iMessage
After the latest update I can no longer send an iMessage. I have about 6 messages that were undeliverable. I searched the Internet and found many others are having the same issues. I asked my granddaughter to iMessage me from her phone and she said it went as a text message which I didn't get because I've blocked texting.
I re-booted, reset my network settings as suggested and nothing has done any good. There were postings that Apple is aware of this issue and will do an update thru iTunes.
Does anyone here have any ideas as to why I can't iMessage or what I can try to get it to work again?
Thanks.Chris,
I decided I'm just too chicken. I went to the AT&T store this morning to see if they could help me but they said since it was an Apple problem, I should call an Apple Store. I did that and they said if I would come in they might be able to help me. But that would be driving across the bridge to St. Louis County which I will NOT do. Those highways are killers.
I've been seriously considering going with a prepaid plan because AT&T is getting to me. This was probably the final straw.
I really appreciate your time but guess I'll just pass. BTW, the Apple Store said they had NO idea when Apple would update the software to fix this problem since only about 1% suffered this problem. My children had no problems at all. So strange.
I did do the hard re-boot and disabled my Network setting and also IMessaging to no avail.
Thanks again. I've printed off your instructions in case I decide to take the risk. -
After ios 8 update I can no longer play music through my car. I have a 2012 Nissan Rogue - which has its own cable made to use with iPhone 4 - I use a apple adapter to converst to use with 5. Has been working fine up until update. Is there a fix for this? The car does not have usb
Here I come to save the daaaaaaaaaay!!!
Had the same issue with my Nissan Rogue 2011.
This listed below will fix it...
Go to General > Restrictions > CarPlay -- Make sure Carplay is DISABLED. (The new IOS 8 enables this on default)
Go to General > Reset > Reset Network Settings
The Nissan Rogue radio system was never designed to work with CarPlay. By default, CarPlay feature comes enabled when you install IOS 8. Suckz, right?
You're very welcome! Have a great day!
Sincerely,
The Superhero -
After the IOS7 update, i can no longer use my imessage and facetime. It says "waiting for activation" and tried to log in on my apple id but it turned out to connection error. Please help me guys! Thank you.
Have you tried to reboot your phone(hold home and lock button simutainiously)?
-
after installing an update I am no longer able to hear sound out of my speakers. A red light comes on where the headphone jack is. I have already attempted to trip to switch with a wooden toothpick in the headphone jack but have not had luck.
Have you gone into system prefs nad made sure that the headphone port is set to audio out. And not audio in.
Also make sure that you are selecting built in speakers for your audio output.
If that does not fix it try doing a Pram reset.
Shut your mac down.
Press the startup button.
Hold down the following keys. Command Option P and R. Wait till you hear the chime 2 times. Then let go. See if that fixes it. -
After the newe update i am not longer abled to open new tabblads
Hello pleaple after the new update i whas no longer anabled to open farder any king of a new tabled. When i clik on the buttun to open a new one thare hapens nohing. please seport.
Uninstall the Ask toolbar and it should work again. There is a compatibility issue with the Ask toolbar and Firefox that prevents new tabs from being opened.
There are a couple of places to check for the Ask toolbar:
* Check the Windows Control panel for the Ask Toolbar - http://about.ask.com/apn/toolbar/docs/default/faq/en/ff/index.html#na4
* Also check your list of extensions, you may be able to uninstall it from there - https://support.mozilla.com/kb/Uninstalling+add-ons -
How can I get my printer to work after a Yosemite update?
How can I get my printer to work after a Yosemite update?
Hi there michaelfromepsom,
You may find the printer troubleshooting steps in the article below helpful.
Troubleshooting printer issues in OS X
-Griff W. -
After the security update I can no longer save or save as in Adobe Illustrator. The program has become useless. I tried the Rosetta Fix to no avail. How can I fix this?
I'm assuming by "I tried the Rosetta Fix to no avail" that means you downloaded and installed the 10.6.8 Combo Update? Is that correct, Apple hasn't posted any fix so you need to be specific about what you mean.
Please look over
http://osxdaily.com/category/mac-os-x/
is that the fix you are referring to? -
i had saw loner solved some similar issues who have lost their boot camp after Yosemite update, but my issue is different. i had thee partitions in windows one mac as usual, one boot camp and one i made in windows by shrinking the boot camp partition. but after the Yosemite update i lost the partition which i have made. both mac and windows working perfectly. requesting your suport
i'am using mac book projaanies-MacBook-Pro:~ user$ diskutil list
/dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *320.1 GB disk0
1: EFI EFI 209.7 MB disk0s1
2: Apple_HFS Macintosh HD 143.5 GB disk0s2
3: Apple_Boot Recovery HD 650.0 MB disk0s3
4: Microsoft Basic Data BOOTCAMP 175.7 GB disk0s4
/dev/disk1
#: TYPE NAME SIZE IDENTIFIER
0: My DVD *4.5 GB disk1
jaanies-MacBook-Pro:~ user$
jaanies-MacBook-Pro:~ user$ diskutil cs list
No CoreStorage logical volume groups found
jaanies-MacBook-Pro:~ user$
jaanies-MacBook-Pro:~ user$ sudo gpt -vv -r show /dev/disk0
gpt show: /dev/disk0: mediasize=320072933376; sectorsize=512; blocks=625142448
gpt show: /dev/disk0: Suspicious MBR at sector 0
gpt show: /dev/disk0: Pri GPT at sector 1
gpt show: /dev/disk0: Sec GPT at sector 625142447
start size index contents
0 1 MBR
1 1 Pri GPT header
2 32 Pri GPT table
34 6
40 409600 1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
409640 280244408 2 GPT part - 48465300-0000-11AA-AA11-00306543ECAC
280654048 1269536 3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
281923584 343218176 4 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
625141760 655
625142415 32 Sec GPT table
625142447 1 Sec GPT header
jaanies-MacBook-Pro:~ user$
jaanies-MacBook-Pro:~ user$ sudo fdisk /dev/disk0
Disk: /dev/disk0 geometry: 38913/255/63 [625142448 sectors]
Signature: 0xAA55
Starting Ending
#: id cyl hd sec - cyl hd sec [ start - size]
1: EE 1023 254 63 - 1023 254 63 [ 1 - 409639] <Unknown ID>
2: AF 1023 254 63 - 1023 254 63 [ 409640 - 280244408] HFS+
3: AB 1023 254 63 - 1023 254 63 [ 280654048 - 1269536] Darwin Boot
*4: 07 1023 254 63 - 1023 254 63 [ 281923584 - 343218176] HPFS/QNX/AUX
jaanies-MacBook-Pro:~ user$ -
My iTunes will not recognize my iPhone after iTunes was updated.
my iTunes will not recognize my iPhone after iTunes was updated. what does that mean?
<Re-Titled By Host>Hello mzshay2u2,
Thanks for using Apple Support Communities.
From your post I understand that you're unable to locate your iPhone within iTunes 12 on your Mac. First, I'd like you to take a look at the screenshot below, as iTunes 12 changed the navigation of your Library.
Sync your iPhone, iPad and iPod with iTunes using USB
If you do not see your iPhone's icon there, then continue on to the link below.
iOS: Device not recognized in iTunes for OS X
Cheers,
Alex H. -
IMac looks like this after todays Yosemite Update
My iMac now looks like this after todays Yosemite Update. Is this iOS or Hardware issues ?
Well I managed to get the Snow Leopard disk out and restarted the mac using OS X Recovery. I've selected the option to reinstall OS X. I'm at a screen that is asking me to 'Select the disk where you want to install OS X'. I'm presented two options one labeled 'EFI' and the other 'Recovery HD'. I chose the later but it's been sitting on a spinning beach ball for 30 minutes now so I can't select 'Install' to proceed. Any idea what has happened to my mac? A hard drive failure I assume or something else?
-
My iphone 5S is stuck on a screen displaying the itunes symbol and a charging cable. I tried connecting it to itunes and updating it to the new software, and backing it up but it keeps saying unknown error 4005, Also when I first tried backing up my phone on my computer it would begin the processes then half way through it would say IPHONE has been disconnected, now it won't recognize it or anything. what can i do? This is a brand new phone!!!
Hello jraff21,
I was able to locate a support article for the error you mentioned. The following steps may help you get your device back to working order:
iOS: Restore errors 4005, 4013, and 4014 - Apple Support
You may see one of these messages if the device unexpectedly disconnects during the update or restore or iTunes couldn't tell the device to go to the restore state.
The iPhone [device name] could not be restored. An unknown error occurred (4005).
The iPhone [device name] could not be restored. An unknown error occurred (4013).
The iPhone [device name] could not be restored. An unknown error occurred (4014).
Try these steps to resolve the issue:
Install the latest version of iTunes.
Restart your computer.
Make sure your computer is up to date. If an update requires a restart, check for updates again after you restart.
Restore using another USB cable.
Learn more about updating OS X.
Learn more about updating Windows.
Restore your device on another computer.
If you continue to see error 4005, 4013, or 4014 when you restore your device,contact Apple for support.
Learn more about other update and restore errors.
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD -
How to move iPhone contact list with custom ringtones to OS X server Contacts?
I have recently setup a new Mac Pro, Mid 2012, running Mavericks OS X Server. I was previously syncing through iTunes on Snow Leopard, 10.6...
Due to the changes in Mavericks WRT iTunes address book syncing, I want to setup Contacts in Server, as I do not want to use iCloud. I tried using the Address Book sync on my MacBook Pro, but that doesn't appear to save any custom ringtone data. I setup Contacts in Server & I moved the current address book to Mavericks, but dragging the contacts into the Server list in Contacts generates warnings, "Some contacts could not be copied to the server" and then sometimes starts duplicating the groups and contacts. The system log has some errors that seem related (system & user munged):
Jan 1 22:44:46 system.sub.domain Contacts[3203]: Error reading store metadata: Error Domain=NSCocoaErrorDomain Code=260 "The file \u201cAddressBook-v22.abcddb\u201d couldn\u2019t be opened because there is no such file." UserInfo=0x60000047ec80 {NSURL=file:///Users/kilroy/Library/Application%20Support/AddressBook/Sources/4 233913F-017D-4AA5-887A-E0957EECA4B0/AddressBook-v22.abcddb}
Jan 1 22:44:46 system.sub.domain Contacts[3203]: Database file is empty: /Users/kilroy/Library/Application Support/AddressBook/Sources/4233913F-017D-4AA5-887A-E0957EECA4B0/AddressBook-v2 2.abcddb
Jan 1 22:44:46 system.sub.domain Contacts[3203]: Failed adding account: The operation couldn\u2019t be completed. (AppleInternetAccountsErrorDomain error 13.)
AddressBook-v22.abcddb, does exists, T/S of 22:44. Maybe the above is actually a warning that it created the file? ... except the Failed adding account doesn't sound good.
Jan 1 23:30:37 system.sub.domain Contacts[7073]: [CardDAVPlugin-ERROR] -_handleCompletedAction:(null) href:https://[email protected]:8443/addressbooks/__uids__/85897855-A1A7-4846-8134-65C7619EE3B8/addressbook/677 0d3b722f65b9d1657bb55412ad071.vcf localETag:"29b0055eeb14610abbb7d2808c08e540" errorItem:(null) error:(null); NIL href or action
Jan 1 23:30:38 system.sub.domain Contacts[7073]: [CardDAVPlugin-ERROR] -_handleCompletedAction:(null) href:https://[email protected]:8443/addressbooks/__uids__/85897855-A1A7-4846-8134-65C7619EE3B8/addressbook/1ca 7c41d318c83472743fad0400ecdd3.vcf localETag:"aa2b10b8148984374a2117e87444f4d0" errorItem:(null) error:(null); NIL href or action
Jan 1 23:30:38 system.sub.domain Contacts[7073]: [CardDAVPlugin-ERROR] Exception caught while running sync with server: Error Domain=CoreDAVErrorDomain Code=1 "The operation couldn\u2019t be completed. (CoreDAVErrorDomain error 1.)"
1 23:30:41 system.sub.domain Contacts[7073]: [CardDAVPlugin-ERROR] -_handleCompletedAction:(null) href:https://[email protected]:8443/addressbooks/__uids__/85897855-A1A7-4846-8134-65C7619EE3B8/addressbook/86b 4883827ee841f0e6d01893a8ae225.vcf localETag:"79e207a20cf8e7052decba4fe9e1e743" errorItem:(null) error:(null); NIL href or action
Jan 1 23:30:41 system.sub.domain Contacts[7073]: [CardDAVPlugin-ERROR] -_handleCompletedAction:(null) href:https://[email protected]:8443/addressbooks/__uids__/85897855-A1A7-4846-8134-65C7619EE3B8/addressbook/90c 4c7aa12d6cb1fa4d68b2748fde985.vcf localETag:"d4ca80d1e1ac5dc69e08db5c0cb18835" errorItem:(null) error:(null); NIL href or action
So the question is:
How to does one move or import iPhone contact list with custom ringtones to OS X server Contacts? ... and will Contacts save/preserve the ringtone settings?
Thankslsof is the standard tool for listing open files, although I'm not quite sure it'll do what you want.
It will list every open file used by every process on the machine, including many you don't expect. I don't know how it will present files opened by network users - whether they'll appear as owned by the file sharing process or not at all. Definitely one to try.
Maybe you are looking for
-
Weblogic Server 9.2 Crashes when using the JMS Wrapped Connection Pooling.
===== BEGIN DUMP ============================================================= JRockit dump produced after 0 days, 01:05:05 on Thu Sep 16 18:27:36 2010 Additional information is available in: E:\obopay\servers\EWP_9.2_Domain\jrockit.4516.dump E:\obop
-
Double print in one line,when convert spool to PDF
Dear Expert: I have a problem to solve when convert spool to PDF,there is one line will double imaged. The form is created by smartforms. I have tryed many ways,retype the text or start a new line,all didn't works. So could any one tell me how to sol
-
Customer Record Creation - XD01
hello, I am trying to upload data like Street2, street3 and street 4 which can be viewed in the street address drop down in transacction XD01/02. In call transaction i am not able to upload. Please can anyone tell me the reason why it is doing so? Th
-
I am trying to rotate a video clip I took with my Canon camera. When I click on adjust, the crop function is not active. I'm new at this, so any help would be appreciated.
-
Cannot find any information about this. I cannot find anything on OCS2007 R2 with Exchange 2013. We have OCS 2007 R2 with Exchange 2007. The plan is to migrate Exchange 2007 to Exchange 2013. We configured new Exchange server and migrated test user.