After kernel and xorg upgrade, xorg crashes at login

I've upgraded several packages and have some trouble with Xorg since then. Those are the upgraded packages:
[2009-12-26 18:08] upgraded libdrm (2.4.16-1 -> 2.4.17-2)
[2009-12-26 18:08] upgraded libgl (7.6-2 -> 7.7-1)
[2009-12-26 18:08] upgraded ati-dri (7.6-2 -> 7.7-1)
[2009-12-26 18:08] upgraded git (1.6.5.7-1 -> 1.6.6-1)
[2009-12-26 18:09] upgraded gnome-bluetooth (2.28.3-1 -> 2.28.6-1)
[2009-12-26 18:09] upgraded gnome-user-share (2.28.1-1 -> 2.28.2-1)
[2009-12-26 18:09] upgraded hdparm (9.27-1 -> 9.27-2)
[2009-12-26 18:09] upgraded kernel26-firmware (2.6.32.2-1 -> 2.6.32.2-2)
[2009-12-26 18:10] upgraded kernel26 (2.6.30.6-1 -> 2.6.32.2-2)
[2009-12-26 18:10] upgraded lib32-libdrm (2.4.16-1 -> 2.4.17-2)
[2009-12-26 18:10] upgraded lib32-libgl (7.6-2 -> 7.6.1-1)
[2009-12-26 18:10] upgraded lib32-mesa (7.6-2 -> 7.6.1-1)
[2009-12-26 18:10] upgraded libgnome (2.28.0-1 -> 2.28.0-2)
[2009-12-26 18:10] upgraded libxcb (1.4-1 -> 1.5-1)
[2009-12-26 18:10] upgraded mesa (7.6-2 -> 7.7-1)
[2009-12-26 18:10] upgraded pm-utils (1.2.6.1-2 -> 1.2.6.1-3)
[2009-12-26 18:10] upgraded pycups (1.9.46-2 -> 1.9.47-1)
[2009-12-26 18:10] upgraded ruby-gnome2 (0.19.3-1 -> 0.19.3-2)
[2009-12-26 18:10] upgraded run-parts (3.2.1-1 -> 3.2.2-1)
[2009-12-26 18:10] upgraded system-config-printer-common (1.1.13-1 -> 1.1.15-1)
[2009-12-26 18:10] upgraded system-config-printer-gnome (1.1.13-1 -> 1.1.15-1)
[2009-12-26 18:11] upgraded totem (2.28.4-1 -> 2.28.5-1)
[2009-12-26 18:11] upgraded udev (146-2 -> 149-1)
[2009-12-26 18:11] upgraded xf86-input-evdev (2.2.5-1 -> 2.3.2-1)
[2009-12-26 18:11] upgraded xf86-input-keyboard (1.3.2-2 -> 1.4.0-1)
[2009-12-26 18:11] upgraded xf86-input-mouse (1.4.0-2 -> 1.5.0-1)
[2009-12-26 18:11] upgraded xf86-video-ati (6.12.2-2 -> 6.12.4-3)
[2009-12-26 18:11] upgraded xf86-video-vesa (2.2.0-1 -> 2.2.1-1)
[2009-12-26 18:11] upgraded xorg-server-utils (7.4-7 -> 7.5-3)
[2009-12-26 18:11] upgraded xorg-server (1.6.3.901-1 -> 1.7.3.902-1)
[2009-12-26 18:11] upgraded zlib (1.2.3.3-3 -> 1.2.3.4-1)
[2009-12-26 18:14] upgraded flvstreamer (1.8k-1 -> 1.9-1)
[2009-12-29 12:59] upgraded lib32-libgcrypt (1.4.4-2 -> 1.4.5-1)
[2009-12-29 12:59] upgraded lib32-libgl (7.6.1-1 -> 7.7-1)
[2009-12-29 12:59] upgraded lib32-mesa (7.6.1-1 -> 7.7-1)
[2009-12-29 12:59] upgraded libass (0.9.7-1 -> 0.9.8-1)
[2009-12-29 12:59] upgraded lucene (2.9.0-1 -> 3.0.0-1)
[2009-12-29 12:59] upgraded subversion (1.6.6-2 -> 1.6.6-3)
[2009-12-29 12:59] upgraded tzdata (2009s-1 -> 2009t-1)
[2009-12-29 12:59] upgraded zlib (1.2.3.4-1 -> 1.2.3.4-3)
I have tried to disable KMS, and tried further to disable Compiz, to no avail. Every time I log into Xorg, I either get a black screen with nothing showing (I can move the cursor, though), or sometimes I can see the wallpaper. When I do see the wallpaper, however, Xorg eventually freezes. When I do not see the wallpaper, nothing happens.
Anyway, if you need any more information, tell me, I'll tell it.

@rocking turtle
I just uninstalled xf86-input-mouse and xf86-input-keyboard. I had already configured my input devices to work with xf86-input-evdev.
The login process went a little further than usual (gnome-panel loaded) but then Xorg crashed and I was forced back to GDM.
@ewaller
I'm posting my rc.conf, /var/log/Xorg.0.log and the interesting stuff you wanted from everyting.log:
The intereting stuff in everything.log seems to point at libdrm, and my stupid ATI card.
Dec 30 10:07:36 cipher kernel: [drm] Initialized drm 1.1.0 20060810
Dec 30 10:07:36 cipher kernel: [drm] radeon defaulting to userspace modesetting.
Dec 30 10:07:36 cipher kernel: pci 0000:01:00.0: setting latency timer to 64
Dec 30 10:07:36 cipher kernel: [drm] Initialized radeon 1.31.0 20080528 for 0000:01:00.0 on minor 0
Dec 30 10:07:36 cipher kernel: [drm] Setting GART location based on new memory map
Dec 30 10:07:36 cipher kernel: [drm] Loading R500 Microcode
Dec 30 10:07:36 cipher kernel: platform radeon_cp.0: firmware: requesting radeon/R520_cp.bin
Dec 30 10:07:36 cipher load-modules.sh: 'platform:radeon_cp' is not a valid module or alias name
Dec 30 10:07:36 cipher kernel: [drm] Num pipes: 1
Dec 30 10:07:36 cipher kernel: [drm] writeback test succeeded in 1 usecs
Dec 30 10:07:44 cipher gdm-simple-greeter[4794]: GLib-GObject-CRITICAL: g_param_spec_flags: assertion `G_TYPE_IS_FLAGS (flags_type)' failed
Dec 30 10:07:44 cipher gdm-simple-greeter[4794]: GLib-GObject-CRITICAL: g_object_class_install_property: assertion `G_IS_PARAM_SPEC (pspec)' failed
Dec 30 10:07:45 cipher gdm-simple-greeter[4794]: WARNING: Unable to read from file /etc/arch-release
Dec 30 10:07:46 cipher gdm-simple-greeter[4794]: Pango-WARNING: Invalid UTF-8 string passed to pango_layout_set_text()
Dec 30 10:08:01 cipher nautilus: Nautilus-Actions 1.12.2 initializing...
Dec 30 10:08:54 cipher kernel: CE: hpet increasing min_delta_ns to 15000 nsec
Dec 30 10:09:51 cipher kernel: CE: hpet increasing min_delta_ns to 22500 nsec
Dec 30 10:13:14 cipher NetworkManager: <info> (wlan0): supplicant connection state: completed -> group handshake
Dec 30 10:13:14 cipher NetworkManager: <info> (wlan0): supplicant connection state: group handshake -> completed
Dec 30 10:13:51 cipher kernel: [drm] Num pipes: 1
Dec 30 10:13:52 cipher kernel: [drm] Setting GART location based on new memory map
Dec 30 10:13:52 cipher kernel: [drm] Loading R500 Microcode
Dec 30 10:13:52 cipher kernel: platform radeon_cp.0: firmware: requesting radeon/R520_cp.bin
Dec 30 10:13:52 cipher kernel: [drm] Num pipes: 1
Dec 30 10:13:52 cipher kernel: [drm] writeback test succeeded in 1 usecs
Dec 30 10:13:52 cipher load-modules.sh: 'platform:radeon_cp' is not a valid module or alias name
Dec 30 10:13:54 cipher gdm-simple-greeter[5211]: GLib-GObject-CRITICAL: g_param_spec_flags: assertion `G_TYPE_IS_FLAGS (flags_type)' failed
Dec 30 10:13:54 cipher gdm-simple-greeter[5211]: GLib-GObject-CRITICAL: g_object_class_install_property: assertion `G_IS_PARAM_SPEC (pspec)' failed
Dec 30 10:13:54 cipher gdm-simple-greeter[5211]: WARNING: Unable to read from file /etc/arch-release
Dec 30 10:13:54 cipher gdm-simple-greeter[5211]: Pango-WARNING: Invalid UTF-8 string passed to pango_layout_set_text()
Dec 30 10:14:03 cipher gnome-session[5241]: WARNING: Could not launch application 'wally.desktop': Unable to start application: Failed to execute child process "wally" (No such file or directory)
Dec 30 10:14:03 cipher gnome-session[5241]: WARNING: Could not launch application 'awn.desktop': Unable to start application: Failed to execute child process "awn-autostart" (No such file or directory)
Dec 30 10:14:13 cipher nautilus: Nautilus-Actions 1.12.2 initializing...
Dec 30 10:14:51 cipher kernel: [drm] Num pipes: 1
Dec 30 10:14:51 cipher kernel: compiz[5424]: segfault at 4 ip 00007fdda45f93b0 sp 00007fff520a1358 error 4 in libxcb-glx.so.0.0.0[7fdda45f0000+12000]
Dec 30 10:14:52 cipher kernel: [drm] Setting GART location based on new memory map
Dec 30 10:14:52 cipher kernel: [drm] Loading R500 Microcode
Dec 30 10:14:52 cipher kernel: platform radeon_cp.0: firmware: requesting radeon/R520_cp.bin
Dec 30 10:14:52 cipher kernel: [drm] Num pipes: 1
Dec 30 10:14:52 cipher kernel: [drm] writeback test succeeded in 1 usecs
Dec 30 10:14:52 cipher load-modules.sh: 'platform:radeon_cp' is not a valid module or alias name
Dec 30 10:14:53 cipher gdm-simple-greeter[5630]: GLib-GObject-CRITICAL: g_param_spec_flags: assertion `G_TYPE_IS_FLAGS (flags_type)' failed
Dec 30 10:14:53 cipher gdm-simple-greeter[5630]: GLib-GObject-CRITICAL: g_object_class_install_property: assertion `G_IS_PARAM_SPEC (pspec)' failed
Dec 30 10:14:53 cipher gdm-simple-greeter[5630]: WARNING: Unable to read from file /etc/arch-release
Dec 30 10:14:54 cipher gdm-simple-greeter[5630]: Pango-WARNING: Invalid UTF-8 string passed to pango_layout_set_text()
Dec 30 10:15:02 cipher nautilus: Nautilus-Actions 1.12.2 initializing...
Here's my /var/log/Xorg.0.log:
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.7.3.902 (1.7.4 RC 2)
Release Date: 2009-12-26
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32-ARCH x86_64
Current Operating System: Linux cipher 2.6.32-ARCH #1 SMP PREEMPT Sat Dec 26 09:02:58 CET 2009 x86_64
Kernel command line: root=/dev/disk/by-uuid/cc39eaa7-c39d-4f29-916d-cf0cb8c14611 ro vga=792 boot=quiet
Build Date: 26 December 2009 02:34:45PM
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Dec 30 10:14:51 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) Option "AIGLX" "true"
(==) Automatically adding devices
(==) Automatically enabling devices
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(**) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "Composite" is enabled
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AutoAddDevices.
(II) Loader magic: 0x7c09c0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(--) using VT number 9
(--) PCI:*(0:1:0:0) 1002:7145:1028:2003 ATI Technologies Inc Radeon Mobility X1400 rev 0, Mem @ 0xd0000000/268435456, 0xefdf0000/65536, I/O @ 0x0000ee00/256, BIOS @ 0x????????/131072
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded by default.
(II) LoadModule: "xtrap"
(WW) Warning, couldn't open module xtrap
(II) UnloadModule: "xtrap"
(EE) Failed to load module "xtrap" (module does not exist, 0)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(**) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.7.3.901, module version = 1.2.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 6.12.4
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Radeon 4800 Series, ATI Radeon 4800 Series, ATI FirePro M7750,
ATI M98, ATI M98, ATI M98, ATI Mobility Radeon HD 4650,
ATI Radeon RV730 (AGP), ATI Mobility Radeon HD 4670,
ATI FirePro M5750, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon HD 4350,
ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
ATI Mobility Radeon 4500 Series, ATI FirePro RG220, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon RV710,
ATI Radeon HD 3470, ATI Mobility Radeon HD 3430,
ATI Mobility Radeon HD 3400 Series, ATI Radeon HD 3450,
ATI Radeon HD 3450, ATI Radeon HD 3430, ATI Radeon HD 3450,
ATI FirePro V3700, ATI FireMV 2450, ATI FireMV 2260, ATI FireMV 2260,
ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
ATI Radeon HD 3600 PRO, ATI Mobility Radeon HD 3650,
ATI Mobility Radeon HD 3670, ATI Mobility FireGL V5700,
ATI Mobility FireGL V5725, ATI Radeon HD 3200 Graphics,
ATI Radeon 3100 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3100 Graphics, ATI Radeon HD 3300 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3000 Graphics,
ATI Radeon HD 4200, ATI Radeon 4100, ATI Mobility Radeon HD 4200,
ATI Mobility Radeon 4100, ATI RS880
(II) Primary Device is: PCI 01@00:00:0
(II) RADEON(0): TOTO SAYS 00000000efdf0000
(II) RADEON(0): MMIO registers at 0x00000000efdf0000: size 64KB
(II) RADEON(0): PCI bus 1 card 0 func 0
(==) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(**) RADEON(0): Option "DRI" "true"
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 0.1.0
ABI class: X.Org Video Driver, version 6.0
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(--) RADEON(0): Chipset: "ATI Mobility Radeon X1400" (ChipID = 0x7145)
(--) RADEON(0): Linear framebuffer at 0x00000000d0000000
(II) RADEON(0): PCIE card detected
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 1.0.0
ABI class: X.Org Video Driver, version 6.0
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(II) RADEON(0): ATOM BIOS detected
(II) RADEON(0): ATOM BIOS Rom:
SubsystemVendorID: 0x1028 SubsystemID: 0x2003
IOBaseAddress: 0xee00
Filename: BR18652D.bin
BIOS Bootup Message:
M54P Dell Key largo A12 DDR2 BU BIOS 432e/396m Channel B
(II) RADEON(0): Framebuffer space used by Firmware (kb): 20
(II) RADEON(0): Start of VRAM area used by Firmware: 0x7ffb000
(II) RADEON(0): AtomBIOS requests 20kB of VRAM scratch space
(II) RADEON(0): AtomBIOS VRAM scratch base: 0x7ffb000
(II) RADEON(0): Cannot get VRAM scratch space. Allocating in main memory instead
(II) RADEON(0): Default Engine Clock: 432000
(II) RADEON(0): Default Memory Clock: 396000
(II) RADEON(0): Maximum Pixel ClockPLL Frequency Output: 1100000
(II) RADEON(0): Minimum Pixel ClockPLL Frequency Output: 0
(II) RADEON(0): Maximum Pixel ClockPLL Frequency Input: 13500
(II) RADEON(0): Minimum Pixel ClockPLL Frequency Input: 1000
(II) RADEON(0): Maximum Pixel Clock: 400000
(II) RADEON(0): Reference Clock: 27000
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.31.0
(==) RADEON(0): Page Flipping disabled on r5xx and newer chips.
(II) RADEON(0): Will try to use DMA for Xv image transfers
(II) RADEON(0): Generation 2 PCI interface, using max accessible memory
(II) RADEON(0): Detected total video RAM=131072K, accessible=262144K (PCI BAR=262144K)
(--) RADEON(0): Mapped VideoRAM: 131072 kByte (64 bit DDR SDRAM)
(II) RADEON(0): Color tiling enabled by default
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) RADEON(0): ref_freq: 2700, min_out_pll: 64800, max_out_pll: 110000, min_in_pll: 100, max_in_pll: 1350, xclk: 40000, sclk: 432.000000, mclk: 396.000000
(II) RADEON(0): PLL parameters: rf=2700 rd=12 min=64800 max=110000; xclk=40000
(WW) RADEON(0): LVDS Info:
XRes: 1280, YRes: 800, DotClock: 68900
HBlank: 128, HOverPlus: 21, HSyncWidth: 32
VBlank: 16, VOverPlus: 1, VSyncWidth: 3
(II) RADEON(0): Skipping TV-Out
(II) RADEON(0): Skipping Component Video
encoder: 0x15
encoder: 0xf
(II) RADEON(0): Output VGA-0 using monitor section Monitor0
(II) RADEON(0): I2C bus "VGA-0" initialized.
(II) RADEON(0): Output LVDS has no monitor section
(II) RADEON(0): I2C bus "LVDS" initialized.
(II) RADEON(0): Port0:
XRANDR name: VGA-0
Connector: VGA
CRT1: INTERNAL_KLDSCP_DAC1
DDC reg: 0x7e40
(II) RADEON(0): Port1:
XRANDR name: LVDS
Connector: LVDS
LCD1: INTERNAL_LVTM1
DDC reg: 0x7e30
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
Dac detection success
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
finished output detect: 0
(II) RADEON(0): I2C device "LVDS:ddc2" registered at address 0xA0.
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: CPT Model: 140b Serial#: 0
(II) RADEON(0): Year: 2007 Week: 14
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.613 redY: 0.336 greenX: 0.311 greenY: 0.563
(II) RADEON(0): blueX: 0.152 blueY: 0.131 whiteX: 0.315 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 68.9 MHz Image Size: 331 x 207 mm
(II) RADEON(0): h_active: 1280 h_sync: 1301 h_sync_end 1333 h_blank_end 1408 h_border: 0
(II) RADEON(0): v_active: 800 v_sync: 801 v_sync_end 804 v_blanking: 816 v_border: 0
(II) RADEON(0): Unknown vendor-specific block f
(II) RADEON(0): CT7810154WB4
(II) RADEON(0): *=DPn
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff000e140b1400000000
(II) RADEON(0): 0e110103802115780a092d9d564f9027
(II) RADEON(0): 21505400000001010101010101010101
(II) RADEON(0): 010101010101ea1a0080502010301520
(II) RADEON(0): 13004bcf100000190000000f00000000
(II) RADEON(0): 0000000000206e050f00000000fe0043
(II) RADEON(0): 543738313031353457423420000000fe
(II) RADEON(0): 002a3d44506e94b7ff010120202000f7
finished output detect: 1
finished all detect
before xf86InitialConfiguration
Dac detection success
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: CPT Model: 140b Serial#: 0
(II) RADEON(0): Year: 2007 Week: 14
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.613 redY: 0.336 greenX: 0.311 greenY: 0.563
(II) RADEON(0): blueX: 0.152 blueY: 0.131 whiteX: 0.315 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 68.9 MHz Image Size: 331 x 207 mm
(II) RADEON(0): h_active: 1280 h_sync: 1301 h_sync_end 1333 h_blank_end 1408 h_border: 0
(II) RADEON(0): v_active: 800 v_sync: 801 v_sync_end 804 v_blanking: 816 v_border: 0
(II) RADEON(0): Unknown vendor-specific block f
(II) RADEON(0): CT7810154WB4
(II) RADEON(0): *=DPn
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff000e140b1400000000
(II) RADEON(0): 0e110103802115780a092d9d564f9027
(II) RADEON(0): 21505400000001010101010101010101
(II) RADEON(0): 010101010101ea1a0080502010301520
(II) RADEON(0): 13004bcf100000190000000f00000000
(II) RADEON(0): 0000000000206e050f00000000fe0043
(II) RADEON(0): 543738313031353457423420000000fe
(II) RADEON(0): 002a3d44506e94b7ff010120202000f7
(II) RADEON(0): EDID vendor "CPT", prod id 5131
(II) RADEON(0): Output VGA-0 disconnected
(II) RADEON(0): Output LVDS connected
(II) RADEON(0): Using exact sizes for initial modes
(II) RADEON(0): Output LVDS using initial mode 1280x800
(II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
after xf86InitialConfiguration
(==) RADEON(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) RADEON(0): Using XAA acceleration architecture
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules/libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 1.2.1
ABI class: X.Org Video Driver, version 6.0
(!!) RADEON(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sf.net.
(!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
(--) Depth 24 pixmap format is 32 bpp
(II) RADEON(0): RADEONScreenInit d0000000 0 0
Output LCD1 disable success
Blank CRTC 0 success
Disable CRTC 0 success
Blank CRTC 1 success
Disable CRTC 1 success
(==) RADEON(0): Using 24 bit depth buffer
(II) RADEON(0): RADEONInitMemoryMap() :
(II) RADEON(0): mem_size : 0x08000000
(II) RADEON(0): MC_FB_LOCATION : 0xd7ffd000
(II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
(II) RADEON(0): Depth moves disabled by default
(II) RADEON(0): Using 32 MB GART aperture
(II) RADEON(0): Using 1 MB for the ring buffer
(II) RADEON(0): Using 2 MB for vertex/indirect buffers
(II) RADEON(0): Using 29 MB for GART textures
(II) RADEON(0): Memory manager initialized to (0,0) (1280,8191)
(II) RADEON(0): Reserved area from (0,1280) to (1280,1282)
(II) RADEON(0): Largest offscreen area available: 1280 x 6909
(II) RADEON(0): Will use front buffer at offset 0x0
(II) RADEON(0): Will use back buffer at offset 0x1978000
(II) RADEON(0): Will use depth buffer at offset 0x1fb8000
(II) RADEON(0): Will use 32 kb for PCI GART table at offset 0x7ff8000
(II) RADEON(0): Will use 92160 kb for textures at offset 0x25f8000
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) RADEON(0): [drm] Using the DRM lock SAREA also for drawables.
(II) RADEON(0): [drm] framebuffer handle = 0xd0000000
(II) RADEON(0): [drm] added 1 reserved context for kernel
(II) RADEON(0): X context handle = 0x1
(II) RADEON(0): [drm] installed DRM signal handler
(II) RADEON(0): [pci] 32768 kB allocated with handle 0x0507f900
(II) RADEON(0): [pci] ring handle = 0x1b7ff000
(II) RADEON(0): [pci] Ring mapped at 0x7fe92fe69000
(II) RADEON(0): [pci] Ring contents 0x00000000
(II) RADEON(0): [pci] ring read ptr handle = 0x2b800000
(II) RADEON(0): [pci] Ring read ptr mapped at 0x7fe93c4a0000
(II) RADEON(0): [pci] Ring read ptr contents 0x00000000
(II) RADEON(0): [pci] vertex/indirect buffers handle = 0x1b800000
(II) RADEON(0): [pci] Vertex/indirect buffers mapped at 0x7fe92fc69000
(II) RADEON(0): [pci] Vertex/indirect buffers contents 0x00000000
(II) RADEON(0): [pci] GART texture map handle = 0x1b801000
(II) RADEON(0): [pci] GART Texture map mapped at 0x7fe92dfe9000
(II) RADEON(0): [drm] register handle = 0x2fff8000
(II) RADEON(0): [dri] Visual configs initialized
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0xd7ffd000 0xd7ffd000
(II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
(==) RADEON(0): Backing store disabled
(II) RADEON(0): [DRI] installation complete
(II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
(II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
(II) RADEON(0): [drm] dma control initialized, using IRQ 16
(II) RADEON(0): [drm] Initialized kernel GART heap manager, 29884416
(WW) RADEON(0): DRI init changed memory map, adjusting ...
(WW) RADEON(0): MC_FB_LOCATION was: 0xd7ffd000 is: 0xd7ffd000
(WW) RADEON(0): MC_AGP_LOCATION was: 0x003f0000 is: 0xffffffc0
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0xd7ffd000 0xd7ffd000
(II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
(II) RADEON(0): Direct rendering enabled
(II) RADEON(0): XAA Render acceleration unsupported on Radeon 9500/9700 and newer. Please use EXA instead.
(II) RADEON(0): Render acceleration disabled
(II) RADEON(0): num quad-pipes is 1
(**) RADEON(0): Option "XaaNoOffscreenPixmaps" "true"
(II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Scanline Image Writes
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(II) RADEON(0): Acceleration enabled
(==) RADEON(0): DPMS enabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Will use 32 kb for hardware cursor 0 at offset 0x00643000
(II) RADEON(0): Will use 32 kb for hardware cursor 1 at offset 0x00648000
(II) RADEON(0): Largest offscreen area available: 1280 x 6901
(II) RADEON(0): Set up textured video
Output CRT1 disable success
Output LCD1 disable success
Blank CRTC 0 success
Disable CRTC 0 success
Blank CRTC 1 success
Disable CRTC 1 success
Output LCD1 disable success
Blank CRTC 0 success
Disable CRTC 0 success
Mode 1280x800 - 1408 816 10
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0xd7ffd000 0xd7ffd000
(II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
freq: 68900000
best_freq: 68900000
best_feedback_div: 689
best_ref_div: 18
best_post_div: 15
(II) RADEON(0): crtc(0) Clock: mode 68900, PLL 68900
(II) RADEON(0): crtc(0) PLL : refdiv 18, fbdiv 0x2B1(689), pdiv 15
Set CRTC 0 PLL success
Set CRTC Timing success
Set CRTC 0 Overscan success
Not using RMX
scaler 0 setup success
Set CRTC 0 Source success
crtc 0 YUV disable setup success
Output digital setup success
Output LCD1 enable success
Enable CRTC 0 success
Unblank CRTC 0 success
Output CRT1 disable success
Blank CRTC 1 success
Disable CRTC 1 success
(II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: enabled GLX_texture_from_pixmap with driver support
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/r300_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) RADEON(0): Setting screen physical size to 338 x 211
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.3, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "ca"
(**) Option "xkb_variant" "fr"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found relative axes
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(II) Synaptics touchpad driver version 1.2.1
(**) Option "Device" "/dev/input/event9"
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
(II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
(II) SynPS/2 Synaptics TouchPad: buttons: left right middle double triple
(**) Option "TapButton1" "1"
(**) Option "TapButton2" "2"
(**) Option "TapButton3" "3"
(--) SynPS/2 Synaptics TouchPad: touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
(**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
(**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) config/hal: Adding input device Logitech USB-PS/2 Optical Mouse
(**) Logitech USB-PS/2 Optical Mouse: always reports core events
(**) Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event8"
(II) Logitech USB-PS/2 Optical Mouse: Found 12 mouse buttons
(II) Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
(II) Logitech USB-PS/2 Optical Mouse: Found relative axes
(II) Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
(II) Logitech USB-PS/2 Optical Mouse: Configuring as mouse
(**) Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
(**) Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE)
(**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
(**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration profile 0
(II) Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
(II) config/hal: Adding input device Chicony USB Keyboard
(**) Chicony USB Keyboard: always reports core events
(**) Chicony USB Keyboard: Device: "/dev/input/event7"
(II) Chicony USB Keyboard: Found keys
(II) Chicony USB Keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "Chicony USB Keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "ca"
(**) Option "xkb_variant" "fr"
(II) config/hal: Adding input device Chicony USB Keyboard
(**) Chicony USB Keyboard: always reports core events
(**) Chicony USB Keyboard: Device: "/dev/input/event6"
(II) Chicony USB Keyboard: Found keys
(II) Chicony USB Keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "Chicony USB Keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "ca"
(**) Option "xkb_variant" "fr"
(II) config/hal: Adding input device Sleep Button
(**) Sleep Button: always reports core events
(**) Sleep Button: Device: "/dev/input/event4"
(II) Sleep Button: Found keys
(II) Sleep Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "ca"
(**) Option "xkb_variant" "fr"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "ca"
(**) Option "xkb_variant" "fr"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event5"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "ca"
(**) Option "xkb_variant" "fr"
Dac detection success
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): EDID vendor "CPT", prod id 5131
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 801 804 816 -hsync -vsync (48.9 kHz)
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: CPT Model: 140b Serial#: 0
(II) RADEON(0): Year: 2007 Week: 14
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.613 redY: 0.336 greenX: 0.311 greenY: 0.563
(II) RADEON(0): blueX: 0.152 blueY: 0.131 whiteX: 0.315 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 68.9 MHz Image Size: 331 x 207 mm
(II) RADEON(0): h_active: 1280 h_sync: 1301 h_sync_end 1333 h_blank_end 1408 h_border: 0
(II) RADEON(0): v_active: 800 v_sync: 801 v_sync_end 804 v_blanking: 816 v_border: 0
(II) RADEON(0): Unknown vendor-specific block f
(II) RADEON(0): CT7810154WB4
(II) RADEON(0): *=DPn
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff000e140b1400000000
(II) RADEON(0): 0e110103802115780a092d9d564f9027
(II) RADEON(0): 21505400000001010101010101010101
(II) RADEON(0): 010101010101ea1a0080502010301520
(II) RADEON(0): 13004bcf100000190000000f00000000
(II) RADEON(0): 0000000000206e050f00000000fe0043
(II) RADEON(0): 543738313031353457423420000000fe
(II) RADEON(0): 002a3d44506e94b7ff010120202000f7
(II) RADEON(0): EDID vendor "CPT", prod id 5131
Dac detection success
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): EDID vendor "CPT", prod id 5131
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 801 804 816 -hsync -vsync (48.9 kHz)
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: CPT Model: 140b Serial#: 0
(II) RADEON(0): Year: 2007 Week: 14
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.613 redY: 0.336 greenX: 0.311 greenY: 0.563
(II) RADEON(0): blueX: 0.152 blueY: 0.131 whiteX: 0.315 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 68.9 MHz Image Size: 331 x 207 mm
(II) RADEON(0): h_active: 1280 h_sync: 1301 h_sync_end 1333 h_blank_end 1408 h_border: 0
(II) RADEON(0): v_active: 800 v_sync: 801 v_sync_end 804 v_blanking: 816 v_border: 0
(II) RADEON(0): Unknown vendor-specific block f
(II) RADEON(0): CT7810154WB4
(II) RADEON(0): *=DPn
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff000e140b1400000000
(II) RADEON(0): 0e110103802115780a092d9d564f9027
(II) RADEON(0): 21505400000001010101010101010101
(II) RADEON(0): 010101010101ea1a0080502010301520
(II) RADEON(0): 13004bcf100000190000000f00000000
(II) RADEON(0): 0000000000206e050f00000000fe0043
(II) RADEON(0): 543738313031353457423420000000fe
(II) RADEON(0): 002a3d44506e94b7ff010120202000f7
(II) RADEON(0): EDID vendor "CPT", prod id 5131
Dac detection success
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): EDID vendor "CPT", prod id 5131
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 801 804 816 -hsync -vsync (48.9 kHz)
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: CPT Model: 140b Serial#: 0
(II) RADEON(0): Year: 2007 Week: 14
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.613 redY: 0.336 greenX: 0.311 greenY: 0.563
(II) RADEON(0): blueX: 0.152 blueY: 0.131 whiteX: 0.315 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 68.9 MHz Image Size: 331 x 207 mm
(II) RADEON(0): h_active: 1280 h_sync: 1301 h_sync_end 1333 h_blank_end 1408 h_border: 0
(II) RADEON(0): v_active: 800 v_sync: 801 v_sync_end 804 v_blanking: 816 v_border: 0
(II) RADEON(0): Unknown vendor-specific block f
(II) RADEON(0): CT7810154WB4
(II) RADEON(0): *=DPn
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff000e140b1400000000
(II) RADEON(0): 0e110103802115780a092d9d564f9027
(II) RADEON(0): 21505400000001010101010101010101
(II) RADEON(0): 010101010101ea1a0080502010301520
(II) RADEON(0): 13004bcf100000190000000f00000000
(II) RADEON(0): 0000000000206e050f00000000fe0043
(II) RADEON(0): 543738313031353457423420000000fe
(II) RADEON(0): 002a3d44506e94b7ff010120202000f7
(II) RADEON(0): EDID vendor "CPT", prod id 5131
Dac detection success
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): EDID vendor "CPT", prod id 5131
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 801 804 816 -hsync -vsync (48.9 kHz)
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: CPT Model: 140b Serial#: 0
(II) RADEON(0): Year: 2007 Week: 14
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.613 redY: 0.336 greenX: 0.311 greenY: 0.563
(II) RADEON(0): blueX: 0.152 blueY: 0.131 whiteX: 0.315 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 68.9 MHz Image Size: 331 x 207 mm
(II) RADEON(0): h_active: 1280 h_sync: 1301 h_sync_end 1333 h_blank_end 1408 h_border: 0
(II) RADEON(0): v_active: 800 v_sync: 801 v_sync_end 804 v_blanking: 816 v_border: 0
(II) RADEON(0): Unknown vendor-specific block f
(II) RADEON(0): CT7810154WB4
(II) RADEON(0): *=DPn
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff000e140b1400000000
(II) RADEON(0): 0e110103802115780a092d9d564f9027
(II) RADEON(0): 21505400000001010101010101010101
(II) RADEON(0): 010101010101ea1a0080502010301520
(II) RADEON(0): 13004bcf100000190000000f00000000
(II) RADEON(0): 0000000000206e050f00000000fe0043
(II) RADEON(0): 543738313031353457423420000000fe
(II) RADEON(0): 002a3d44506e94b7ff010120202000f7
(II) RADEON(0): EDID vendor "CPT", prod id 5131
Dac detection success
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): EDID vendor "CPT", prod id 5131
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 801 804 816 -hsync -vsync (48.9 kHz)
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: CPT Model: 140b Serial#: 0
(II) RADEON(0): Year: 2007 Week: 14
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.613 redY: 0.336 greenX: 0.311 greenY: 0.563
(II) RADEON(0): blueX: 0.152 blueY: 0.131 whiteX: 0.315 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 68.9 MHz Image Size: 331 x 207 mm
(II) RADEON(0): h_active: 1280 h_sync: 1301 h_sync_end 1333 h_blank_end 1408 h_border: 0
(II) RADEON(0): v_active: 800 v_sync: 801 v_sync_end 804 v_blanking: 816 v_border: 0
(II) RADEON(0): Unknown vendor-specific block f
(II) RADEON(0): CT7810154WB4
(II) RADEON(0): *=DPn
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff000e140b1400000000
(II) RADEON(0): 0e110103802115780a092d9d564f9027
(II) RADEON(0): 21505400000001010101010101010101
(II) RADEON(0): 010101010101ea1a0080502010301520
(II) RADEON(0): 13004bcf100000190000000f00000000
(II) RADEON(0): 0000000000206e050f00000000fe0043
(II) RADEON(0): 543738313031353457423420000000fe
(II) RADEON(0): 002a3d44506e94b7ff010120202000f7
(II) RADEON(0): EDID vendor "CPT", prod id 5131
Dac detection success
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): EDID vendor "CPT", prod id 5131
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 801 804 816 -hsync -vsync (48.9 kHz)
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: CPT Model: 140b Serial#: 0
(II) RADEON(0): Year: 2007 Week: 14
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.613 redY: 0.336 greenX: 0.311 greenY: 0.563
(II) RADEON(0): blueX: 0.152 blueY: 0.131 whiteX: 0.315 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 68.9 MHz Image Size: 331 x 207 mm
(II) RADEON(0): h_active: 1280 h_sync: 1301 h_sync_end 1333 h_blank_end 1408 h_border: 0
(II) RADEON(0): v_active: 800 v_sync: 801 v_sync_end 804 v_blanking: 816 v_border: 0
(II) RADEON(0): Unknown vendor-specific block f
(II) RADEON(0): CT7810154WB4
(II) RADEON(0): *=DPn
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff000e140b1400000000
(II) RADEON(0): 0e110103802115780a092d9d564f9027
(II) RADEON(0): 21505400000001010101010101010101
(II) RADEON(0): 010101010101ea1a0080502010301520
(II) RADEON(0): 13004bcf100000190000000f00000000
(II) RADEON(0): 0000000000206e050f00000000fe0043
(II) RADEON(0): 543738313031353457423420000000fe
(II) RADEON(0): 002a3d44506e94b7ff010120202000f7
(II) RADEON(0): EDID vendor "CPT", prod id 5131
And my rc.conf:
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime"
# USEDIRECTISA: use direct I/O requests instead of /dev/rtc for hwclock
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_US.utf8"
HARDWARECLOCK="localtime"
USEDIRECTISA="no"
TIMEZONE="America/Toronto"
KEYMAP="cf"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
# MOD_BLACKLIST: Prevent udev from loading these modules
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
# NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
MODULES=(!pcspkr !snd_pcsp !bcm43xx !ndiswrapper loop b43 fuse)
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="cipher"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
# DHCP: Set your interface to "dhcp" (eth0="dhcp")
# Wireless: See network profiles below
eth0="dhcp"
INTERFACES=(lo !eth0 !wlan0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This now requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(@openntpd @stdb @httpd @mysqld @cups @samba syslog-ng network netfs @crond alsa dbus hal fam networkmanager !gdm)
Oh and hell, if you want to have a look on my xorg.conf:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
# InputDevice "Mouse0" "CorePointer"
# InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "ServerFlags"
Option "AIGLX" "true"
EndSection
Section "Module"
Load "xtrap"
Load "extmod"
Load "dbe"
Load "glx"
Load "dri"
Load "drm"
Load "freetype"
Load "synaptics"
EndSection
#Section "InputDevice"
# Identifier "Keyboard0"
# Driver "kbd"
# Option "XkbLayout" "ca"
# Option "XkbVariant" "fr"
#EndSection
#Section "InputDevice"
# Identifier "Mouse0"
# Driver "mouse"
# Option "Protocol" "auto"
# Option "Device" "/dev/input/mice"
# Option "ZAxisMapping" "4 5 6 7"
#EndSection
Section "Monitor"
#DisplaySize 330 210 # mm
Identifier "Monitor0"
VendorName "CPT"
ModelName "140b"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "Dac6Bit" # [<bool>]
#Option "Dac8Bit" # [<bool>]
#Option "BusType" # [<str>]
#Option "CPPIOMode" # [<bool>]
#Option "CPusecTimeout" # <i>
#Option "AGPMode" # <i>
#Option "AGPFastWrite" # [<bool>]
#Option "AGPSize" # <i>
#Option "GARTSize" # <i>
#Option "RingSize" # <i>
#Option "BufferSize" # <i>
#Option "EnableDepthMoves" # [<bool>]
#Option "EnablePageFlip" # [<bool>]
#Option "NoBackBuffer" # [<bool>]
#Option "DMAForXv" # [<bool>]
#Option "FBTexPercent" # <i>
#Option "DepthBits" # <i>
#Option "PCIAPERSize" # <i>
#Option "AccelDFS" # [<bool>]
#Option "IgnoreEDID" # [<bool>]
#Option "DisplayPriority" # [<str>]
#Option "PanelSize" # [<str>]
#Option "ForceMinDotClock" # <freq>
#Option "ColorTiling" # [<bool>]
#Option "VideoKey" # <i>
#Option "RageTheatreCrystal" # <i>
#Option "RageTheatreTunerPort" # <i>
#Option "RageTheatreCompositePort" # <i>
#Option "RageTheatreSVideoPort" # <i>
#Option "TunerType" # <i>
#Option "RageTheatreMicrocPath" # <str>
#Option "RageTheatreMicrocType" # <str>
#Option "ScalerWidth" # <i>
#Option "RenderAccel" # [<bool>]
#Option "SubPixelOrder" # [<str>]
#Option "ShowCache" # [<bool>]
#Option "DynamicClocks" # [<bool>]
#Option "VGAAccess" # [<bool>]
#Option "ReverseDDC" # [<bool>]
#Option "LVDSProbePLL" # [<bool>]
#Option "AccelMethod" # <str>
#Option "DRI" # [<bool>]
#Option "ConnectorTable" # <str>
#Option "DefaultConnectorTable" # [<bool>]
#Option "DefaultTMDSPLL" # [<bool>]
#Option "TVDACLoadDetect" # [<bool>]
#Option "ForceTVOut" # [<bool>]
#Option "TVStandard" # <str>
#Option "IgnoreLidStatus" # [<bool>]
#Option "DefaultTVDACAdj" # [<bool>]
#Option "Int10" # [<bool>]
#Option "EXAVSync" # [<bool>]
#Option "ATOMTVOut" # [<bool>]
Identifier "Card0"
Driver "radeon"
VendorName "ATI Technologies Inc"
BoardName "Radeon Mobility X1400"
BusID "PCI:1:0:0"
Option "XAANoOffscreenPixmaps" "true"
Option "DRI" "true"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
# SubSection "Display"
# Viewport 0 0
# Depth 1
# EndSubSection
# SubSection "Display"
# Viewport 0 0
# Depth 4
# EndSubSection
# SubSection "Display"
# Viewport 0 0
# Depth 8
# EndSubSection
# SubSection "Display"
# Viewport 0 0
# Depth 15
# EndSubSection
# SubSection "Display"
# Viewport 0 0
# Depth 16
# EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
Section "DRI"
Group "video"
Mode 0666
EndSection
Any bit of help is appreciated.

Similar Messages

  • Slow down in X after kernel and xorg packages updated

    Just upgraded to the latest kernel and xorg with the following packages and X has taken a nose dive and slowed down drastically:
    kernelcairo-1.10.0-2  kernel26-2.6.35.7-1
    mesa-7.8.2-3  nss-3.12.8-1  xf86-input-evdev-2.5.0-1
    xf86-video-nv-2.1.18-1  xf86-video-vesa-2.3.0-3
    xkeyboard-config-1.9-1  xorg-server-common-1.9.0-1
    xorg-server-1.9.0-1  xterm-262-1
    Tried reinstalling nvidia, but no help there.  Reverting to the previous packages made things good again.
    Anyone else experiencing this?

    I can confirm nVidia's driver version '260.19.06'  fixes this render lag.
    This version is available in the AUR
    remember to exit xorg and remove the old module after installing
    # rmmod nvidia
    Last edited by gav616 (2010-10-07 17:05:17)

  • Since upgrade of my kernel and xorg...

    Hi,
    Since I've upgraded the kernel and Xorg, my computer is slower, and my alsa is'nt working anymore, except when I redo the alsaconf, but I'm obligated to do it every time I start my computer, and my mouse is'nt scrolling anymore except when I type:
    /usr/bin/xmodmap -e "pointer = 1 2 3 8 9 4 5 6 7 10 11"
    And again every time I boot...
    I'm tired to redo all this stuff before using my computer, could someone help me?
    Thanks!

    you can put that "pointer ..." part into "~/.Xmodmap" and add alsa as daemon to your /etc/rc.conf, that may solve some problems, or at least the "redoing" thing.
    A better way is described in the wiki where also the alsa thingy should be explained somewhere

  • After Sleep, and power off, Lion Crash Totaly! iMac core i5 2011

    After Sleep, and power off, Lion Crash Totaly!
    I`'ve buy a iMac core i5, July 15 2011, 500gb, 4gb (upgraded to 8gb Ram).
    Transf my MBP with Snow at first iMac power on, after tranfer Snow, I buy the Lion, install and use until 2 weeks. After the first Sleep, turn Lion power off to change place. When power on, the Lion was Crashed the computer in some way that was impossible to recover or do anything. even go back the timemachine with Lion or Snow, trey clean PRAM, DVD Boot, nothing works.
    So, I put a Ubuntu LiveCD, REMOVE COMPLETE THE GUID of iMac Disk, also clean the PRAM (cmd+opt+ P + R during boot), so, the iMac was Clean and I Install the SNOW (sure).
    I just Lost the money and download time that spent to get with Lion?
    How can I have a Lion DVD for when Apple fix the LOT OF PROBLEMS?
    Have apple schedule for fix problems?

    After Sleep, and power off, Lion Crash Totaly!
    I`'ve buy a iMac core i5, July 15 2011, 500gb, 4gb (upgraded to 8gb Ram).
    Transf my MBP with Snow at first iMac power on, after tranfer Snow, I buy the Lion, install and use until 2 weeks. After the first Sleep, turn Lion power off to change place. When power on, the Lion was Crashed the computer in some way that was impossible to recover or do anything. even go back the timemachine with Lion or Snow, trey clean PRAM, DVD Boot, nothing works.
    So, I put a Ubuntu LiveCD, REMOVE COMPLETE THE GUID of iMac Disk, also clean the PRAM (cmd+opt+ P + R during boot), so, the iMac was Clean and I Install the SNOW (sure).
    I just Lost the money and download time that spent to get with Lion?
    How can I have a Lion DVD for when Apple fix the LOT OF PROBLEMS?
    Have apple schedule for fix problems?

  • After APTV and itunes upgrade on mac, streaming from itunes to Apple TV is very slow.

    After APTV and itunes upgrade on mac to latest on 02/15, streaming from itunes to Apple TV is very slow. even 5 mins song takes 10-15 mins to start. Netflix/Youtube work fine on Apple TV. restarted Mac, router, modem, appletv. reset Appletv to factory setting and re-start.

    Apple TV 2 does not appear in iTunes (exception being when connected via micro-usb for restore) as it has no sync capabilities.
    See if this helps
    http://support.apple.com/kb/TS2845

  • Mac's and PCs can no longer connect after 10.4.10 Upgrade SMB Crash - Help

    This is my second post on this topic. I have read other similar threads, but none of the advice I have tried has worked so far. We have 4 PCs and 5 Macs at home that were networking nicely until we upgraded the G5 10.4.10. The G5 can browse and connect to any machine on the network. However, no other machine can connect to a shared folder on the G5.
    I installed a clean 10.4.10 on a second hard drive and it works fine. So that eliminates hardware and infrastructure. I really did not want to have to reinstall everything from scratch.
    I performed an Archive and Install and that did not work.
    1) On my G5 I turn on Personal or Windows File Sharing
    2) From another computer PC or Mac I attempt to connect to the shared files
    3) The connection is made most of the time and I can see the folders. However within a few minutes or the second time I attempt to browse the folders, I get an error.
    4) When I return to the G5, the Service is unchecked
    The console log is reporting...
    Aug 19 18:36:02 G5 crashdump14892: smbd crashed
    Aug 19 18:36:02 G5 crashdump14892: crash report written to: /Library/Logs/CrashReporter/smbd.crash.log
    Aug 19 18:59:51 G5 crashdump27414: AppleFileServer crashed
    Aug 19 18:59:52 G5 crashdump27414: crash report written to: /Library/Logs/CrashReporter/AppleFileServer.crash.log
    smbd will crash when attempting a connection from XP
    AppleFileServer will crash when attempting a connection from a Mac
    The AppleFileServer.crash.log reports (first few lines...)
    Binary Images Description:
    0x1000 - 0x132fff AppleFileServer /usr/sbin/AppleFileServer
    0x8fe00000 - 0x8fe52fff dyld 46.12 /usr/lib/dyld
    0x90000000 - 0x901bcfff libSystem.B.dylib /usr/lib/libSystem.B.dylib
    0x90214000 - 0x90219fff libmathCommon.A.dylib /usr/lib/system/libmathCommon.A.dylib
    0x907bb000 - 0x90894fff com.apple.CoreFoundation 6.4.7 (368.28) /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
    0x908dd000 - 0x908ddfff com.apple.CoreServices 10.4 (???)

    Usually whan an Archive & Install doesn't work, it's very few things...
    Bad prefs/plists carried over.
    Some APP or kext or support file not replaced due to permissions, HD Errors, bad aliases, etc.
    Bad info in caches.

  • Can't load nvidia module after kernel and nvidia update

    After latest kernel (3.6.36.2) and nvidia (260.19.29) upgrade xorg doesn't work. I investigated a little, and that's what I found:
    # modprobe nvidia
    FATAL: Error inserting nvidia (/lib/modules/2.6.36-ARCH/kernel/drivers/video/nvidia.ko): No such device
    I blacklisted nouveau module:
    # cat /etc/rc.conf | grep nouveau
    MODULES=(b43 vboxdrv !nouveau)
    but it didn't help.
    Video card:
    # lspci | grep VGA
    01:00.0 VGA compatible controller: nVidia Corporation G84 [GeForce 8600M GT] (rev a1)

    Initializing cgroup subsys cpuset
    Initializing cgroup subsys cpu
    Linux version 2.6.36-ARCH (tobias@T-POWA-LX) (gcc version 4.5.1 20101125 (prerelease) (GCC) ) #1 SMP PREEMPT Fri Dec 10 20:01:53 UTC 2010
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
    BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000005fed0000 (usable)
    BIOS-e820: 000000005fed0000 - 000000005fee3000 (ACPI NVS)
    BIOS-e820: 000000005fee3000 - 0000000060000000 (reserved)
    BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
    BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
    BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
    BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
    BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
    Notice: NX (Execute Disable) protection missing in CPU or disabled in BIOS!
    DMI present.
    e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
    e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    last_pfn = 0x5fed0 max_arch_pfn = 0x100000
    MTRR default type: uncachable
    MTRR fixed ranges enabled:
    00000-9FFFF write-back
    A0000-BFFFF uncachable
    C0000-FFFFF write-protect
    MTRR variable ranges enabled:
    0 base 000000000 mask FC0000000 write-back
    1 base 040000000 mask FE0000000 write-back
    2 base 05FF00000 mask FFFF00000 uncachable
    3 disabled
    4 disabled
    5 disabled
    6 disabled
    7 disabled
    x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    e820 update range: 0000000000002000 - 0000000000010000 (usable) ==> (reserved)
    Scanning 1 areas for low memory corruption
    modified physical RAM map:
    modified: 0000000000000000 - 0000000000001000 (reserved)
    modified: 0000000000001000 - 0000000000002000 (usable)
    modified: 0000000000002000 - 0000000000010000 (reserved)
    modified: 0000000000010000 - 000000000009f800 (usable)
    modified: 000000000009f800 - 00000000000a0000 (reserved)
    modified: 00000000000dc000 - 0000000000100000 (reserved)
    modified: 0000000000100000 - 000000005fed0000 (usable)
    modified: 000000005fed0000 - 000000005fee3000 (ACPI NVS)
    modified: 000000005fee3000 - 0000000060000000 (reserved)
    modified: 00000000fec00000 - 00000000fec10000 (reserved)
    modified: 00000000fed00000 - 00000000fed00400 (reserved)
    modified: 00000000fed14000 - 00000000fed1a000 (reserved)
    modified: 00000000fed1c000 - 00000000fed90000 (reserved)
    modified: 00000000fee00000 - 00000000fee01000 (reserved)
    modified: 00000000ff000000 - 0000000100000000 (reserved)
    initial memory mapped : 0 - 01800000
    found SMP MP-table at [c00f7bc0] f7bc0
    init_memory_mapping: 0000000000000000-00000000377fe000
    0000000000 - 0000400000 page 4k
    0000400000 - 0037400000 page 2M
    0037400000 - 00377fe000 page 4k
    kernel direct mapping tables up to 377fe000 @ 15000-1a000
    RAMDISK: 37e47000 - 37ff0000
    Allocated new RAMDISK: 00100000 - 002a8feb
    Move RAMDISK from 0000000037e47000 - 0000000037feffea to 00100000 - 002a8fea
    ACPI: RSDP 000f7b40 00024 (v02 Compal)
    ACPI: XSDT 5fed8834 0008C (v01 Compal CRESTLNE 06040000 LTP 00000000)
    ACPI: FACP 5fedfbd2 000F4 (v03 INTEL CRESTLNE 06040000 ALAN 00000001)
    ACPI: DSDT 5fed9b9f 05FBF (v02 Compal CRESTLNE 06040000 INTL 20061109)
    ACPI: FACS 5fee2fc0 00040
    ACPI: APIC 5fedfcc6 00068 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
    ACPI: HPET 5fedfd2e 00038 (v01 Compal CRESTLNE 06040000 LOHR 0000005A)
    ACPI: MCFG 5fedfd66 0003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
    ACPI: TCPA 5fedfda2 00032 (v01 Intel CRESTLNE 06040000 LOHR 0000005A)
    ACPI: TMOR 5fedfdd4 00026 (v01 PTLTD 06040000 PTL 00000003)
    ACPI: SLIC 5fedfdfa 00176 (v01 Compal CRESTLNE 06040000 TBD 00000001)
    ACPI: APIC 5fedff70 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
    ACPI: BOOT 5fedffd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
    ACPI: SSDT 5fed98da 002C5 (v01 SataRe SataAhci 00001000 INTL 20050624)
    ACPI: SSDT 5fed8e4c 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050624)
    ACPI: SSDT 5fed8da6 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050624)
    ACPI: SSDT 5fed88c0 004E6 (v01 PmRef CpuPm 00003000 INTL 20050624)
    ACPI: BIOS bug: multiple APIC/MADT found, using 0
    ACPI: If "acpi_apic_instance=2" works better, notify [email protected]
    ACPI: Local APIC address 0xfee00000
    646MB HIGHMEM available.
    887MB LOWMEM available.
    mapped low ram: 0 - 377fe000
    low ram: 0 - 377fe000
    Zone PFN ranges:
    DMA 0x00000001 -> 0x00001000
    Normal 0x00001000 -> 0x000377fe
    HighMem 0x000377fe -> 0x0005fed0
    Movable zone start PFN for each node
    early_node_map[3] active PFN ranges
    0: 0x00000001 -> 0x00000002
    0: 0x00000010 -> 0x0000009f
    0: 0x00000100 -> 0x0005fed0
    On node 0 totalpages: 392800
    free_area_init_node: node 0, pgdat c142d600, node_mem_map c1598020
    DMA zone: 32 pages used for memmap
    DMA zone: 0 pages reserved
    DMA zone: 3952 pages, LIFO batch:0
    Normal zone: 1744 pages used for memmap
    Normal zone: 221486 pages, LIFO batch:31
    HighMem zone: 1294 pages used for memmap
    HighMem zone: 164292 pages, LIFO batch:31
    Using APIC driver default
    ACPI: PM-Timer IO Port: 0x1008
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Using ACPI (MADT) for SMP configuration information
    ACPI: HPET id: 0x8086a201 base: 0xfed00000
    SMP: Allowing 2 CPUs, 0 hotplug CPUs
    nr_irqs_gsi: 40
    early_res array is doubled to 64 at [16000 - 167ff]
    PM: Registered nosave memory: 0000000000002000 - 0000000000010000
    PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
    PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
    Allocating PCI resources starting at 60000000 (gap: 60000000:9ec00000)
    Booting paravirtualized kernel on bare hardware
    setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
    PERCPU: Embedded 13 pages/cpu @c2400000 s31488 r0 d21760 u2097152
    pcpu-alloc: s31488 r0 d21760 u2097152 alloc=1*4194304
    pcpu-alloc: [0] 0 1
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 389730
    Kernel command line: BOOT_IMAGE=/boot/vmlinuz26 root=/dev/sda2 ro
    PID hash table entries: 4096 (order: 2, 16384 bytes)
    Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Initializing CPU#0
    allocated 7858220 bytes of page_cgroup
    please try 'cgroup_disable=memory' option if you don't want memory cgroups
    Subtract (52 early reservations)
    #1 [0000001000 - 0000002000] EX TRAMPOLINE
    #2 [0001000000 - 000158fe8c] TEXT DATA BSS
    #3 [0001590000 - 0001596198] BRK
    #4 [00000f7bd0 - 0000100000] BIOS reserved
    #5 [00000f7bc0 - 00000f7bd0] MP-table mpf
    #6 [000009f800 - 000009fd71] BIOS reserved
    #7 [000009ff35 - 00000f7bc0] BIOS reserved
    #8 [000009fd71 - 000009ff35] MP-table mpc
    #9 [0000010000 - 0000011000] TRAMPOLINE
    #10 [0000011000 - 0000015000] ACPI WAKEUP
    #11 [0000015000 - 0000016000] PGTABLE
    #12 [0000100000 - 00002a9000] NEW RAMDISK
    #13 [0001597000 - 0001598000] BOOTMEM
    #14 [0001598000 - 0002198000] BOOTMEM
    #15 [000158fec0 - 000158fec4] BOOTMEM
    #16 [000158ff00 - 000158ffc0] BOOTMEM
    #17 [00015961c0 - 0001596214] BOOTMEM
    #18 [0002198000 - 000219b000] BOOTMEM
    #19 [000158ffc0 - 0001590000] BOOTMEM
    #20 [000219b000 - 000219e000] BOOTMEM
    #21 [0001596240 - 0001596265] BOOTMEM
    #22 [0001596280 - 00015962a7] BOOTMEM
    #23 [00015962c0 - 0001596464] BOOTMEM
    #24 [0001596480 - 00015964c0] BOOTMEM
    #25 [00015964c0 - 0001596500] BOOTMEM
    #26 [0001596500 - 0001596540] BOOTMEM
    #27 [0001596540 - 0001596580] BOOTMEM
    #28 [0001596580 - 00015965c0] BOOTMEM
    #29 [00015965c0 - 0001596600] BOOTMEM
    #30 [0001596600 - 0001596640] BOOTMEM
    #31 [0001596640 - 0001596680] BOOTMEM
    #32 [0001596680 - 00015966c0] BOOTMEM
    #33 [00015966c0 - 0001596700] BOOTMEM
    #34 [0001596700 - 0001596740] BOOTMEM
    #35 [0001596740 - 0001596780] BOOTMEM
    #36 [0001596780 - 0001596790] BOOTMEM
    #37 [00015967c0 - 00015967d0] BOOTMEM
    #38 [0001596800 - 000159682d] BOOTMEM
    #39 [0001596840 - 000159686d] BOOTMEM
    #40 [0002400000 - 000240d000] BOOTMEM
    #41 [0002600000 - 000260d000] BOOTMEM
    #42 [0001596880 - 0001596884] BOOTMEM
    #43 [00015968c0 - 00015968c4] BOOTMEM
    #44 [0001596900 - 0001596908] BOOTMEM
    #45 [0001596940 - 0001596948] BOOTMEM
    #46 [0001596980 - 0001596a28] BOOTMEM
    #47 [0001596a40 - 0001596aa8] BOOTMEM
    #48 [000219e000 - 00021a2000] BOOTMEM
    #49 [00021a2000 - 0002222000] BOOTMEM
    #50 [0002222000 - 0002262000] BOOTMEM
    #51 [000260d000 - 0002d8b82c] BOOTMEM
    Initializing HighMem for node 0 (000377fe:0005fed0)
    Memory: 1542868k/1571648k available (3104k kernel code, 28332k reserved, 1205k data, 428k init, 662344k highmem)
    virtual kernel memory layout:
    fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
    pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
    lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
    .init : 0xc1436000 - 0xc14a1000 ( 428 kB)
    .data : 0xc1308056 - 0xc1435820 (1205 kB)
    .text : 0xc1000000 - 0xc1308056 (3104 kB)
    Checking if this processor honours the WP bit even in supervisor mode...Ok.
    SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    Hierarchical RCU implementation.
    RCU-based detection of stalled CPUs is disabled.
    Verbose stalled-CPUs detection is disabled.
    NR_IRQS:512
    Extended CMOS year: 2000
    Console: colour VGA+ 80x25
    console [tty0] enabled
    hpet clockevent registered
    Fast TSC calibration using PIT
    Detected 1795.546 MHz processor.
    Calibrating delay loop (skipped), value calculated using timer frequency.. 3592.72 BogoMIPS (lpj=5985153)
    pid_max: default: 32768 minimum: 301
    Security Framework initialized
    TOMOYO Linux initialized
    AppArmor: AppArmor disabled by boot time parameter
    Mount-cache hash table entries: 512
    Initializing cgroup subsys ns
    Initializing cgroup subsys cpuacct
    Initializing cgroup subsys memory
    Initializing cgroup subsys devices
    Initializing cgroup subsys freezer
    Initializing cgroup subsys net_cls
    Initializing cgroup subsys blkio
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 0
    mce: CPU supports 6 MCE banks
    CPU0: Thermal monitoring handled by SMI
    using mwait in idle threads.
    Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
    PEBS disabled due to CPU errata.
    ... version: 2
    ... bit width: 40
    ... generic registers: 2
    ... value mask: 000000ffffffffff
    ... max period: 000000007fffffff
    ... fixed-purpose events: 3
    ... event mask: 0000000700000003
    ACPI: Core revision 20100702
    Enabling APIC mode: Flat. Using 1 I/O APICs
    ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    CPU0: Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz stepping 0d
    NMI watchdog enabled, takes one hw-pmu counter.
    Booting Node 0, Processors #1 Ok.
    Initializing CPU#1
    CPU1: Thermal monitoring handled by SMI
    NMI watchdog enabled, takes one hw-pmu counter.
    Brought up 2 CPUs
    Total of 2 processors activated (7184.34 BogoMIPS).
    devtmpfs: initialized
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    PCI: not using MMCONFIG
    PCI: PCI BIOS revision 2.10 entry at 0xfdde1, last bus=14
    PCI: Using configuration type 1 for base access
    bio: create slab <bio-0> at 0
    ACPI: EC: Look up EC in DSDT
    ACPI: BIOS _OSI(Linux) query ignored
    ACPI: SSDT 5fed95da 00238 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
    ACPI: Dynamic OEM Table Load:
    ACPI: SSDT (null) 00238 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
    ACPI: SSDT 5fed90ab 004AA (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
    ACPI: Dynamic OEM Table Load:
    ACPI: SSDT (null) 004AA (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
    ACPI: SSDT 5fed9812 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20050624)
    ACPI: Dynamic OEM Table Load:
    ACPI: SSDT (null) 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20050624)
    ACPI: SSDT 5fed9555 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624)
    ACPI: Dynamic OEM Table Load:
    ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624)
    ACPI: Interpreter enabled
    ACPI: (supports S0 S3 S4 S5)
    ACPI: Using IOAPIC for interrupt routing
    PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
    PCI: Using MMCONFIG for extended config space
    ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
    ACPI: No dock devices found.
    PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
    ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
    pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
    pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
    pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)
    pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
    pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
    pci_root PNP0A08:00: host bridge window [mem 0x60000000-0xdfffffff] (ignored)
    pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfebfffff] (ignored)
    pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:01.0: PME# disabled
    pci 0000:00:1a.0: reg 20: [io 0x1800-0x181f]
    pci 0000:00:1a.1: reg 20: [io 0x1820-0x183f]
    pci 0000:00:1a.7: reg 10: [mem 0xf8404800-0xf8404bff]
    pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
    pci 0000:00:1a.7: PME# disabled
    pci 0000:00:1b.0: reg 10: [mem 0xf8400000-0xf8403fff 64bit]
    pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:1b.0: PME# disabled
    pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.0: PME# disabled
    pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.1: PME# disabled
    pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.2: PME# disabled
    pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.3: PME# disabled
    pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.4: PME# disabled
    pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
    pci 0000:00:1c.5: PME# disabled
    pci 0000:00:1d.0: reg 20: [io 0x1840-0x185f]
    pci 0000:00:1d.1: reg 20: [io 0x1860-0x187f]
    pci 0000:00:1d.2: reg 20: [io 0x1880-0x189f]
    pci 0000:00:1d.7: reg 10: [mem 0xf8404c00-0xf8404fff]
    pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    pci 0000:00:1d.7: PME# disabled
    pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
    pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
    pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f)
    pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0068 (mask 0007)
    pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 1640 (mask 007f)
    pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
    pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
    pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
    pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
    pci 0000:00:1f.1: reg 20: [io 0x18a0-0x18af]
    pci 0000:00:1f.2: reg 10: [io 0x18d8-0x18df]
    pci 0000:00:1f.2: reg 14: [io 0x18cc-0x18cf]
    pci 0000:00:1f.2: reg 18: [io 0x18d0-0x18d7]
    pci 0000:00:1f.2: reg 1c: [io 0x18c8-0x18cb]
    pci 0000:00:1f.2: reg 20: [io 0x18e0-0x18ff]
    pci 0000:00:1f.2: reg 24: [mem 0xf8404000-0xf84047ff]
    pci 0000:00:1f.2: PME# supported from D3hot
    pci 0000:00:1f.2: PME# disabled
    pci 0000:00:1f.3: reg 10: [mem 0x00000000-0x000000ff]
    pci 0000:00:1f.3: reg 20: [io 0x1c00-0x1c1f]
    pci 0000:01:00.0: reg 10: [mem 0xc6000000-0xc6ffffff]
    pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
    pci 0000:01:00.0: reg 1c: [mem 0xc4000000-0xc5ffffff 64bit]
    pci 0000:01:00.0: reg 24: [io 0x2000-0x207f]
    pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
    pci 0000:00:01.0: PCI bridge to [bus 01-01]
    pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
    pci 0000:00:01.0: bridge window [mem 0xc4000000-0xc6ffffff]
    pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    pci 0000:00:1c.0: PCI bridge to [bus 02-02]
    pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
    pci 0000:00:1c.0: bridge window [mem 0xbc000000-0xbfffffff]
    pci 0000:00:1c.0: bridge window [mem 0xcc000000-0xcdffffff 64bit pref]
    pci 0000:04:00.0: reg 10: [mem 0xf0000000-0xf000ffff 64bit]
    pci 0000:04:00.0: PME# supported from D3hot D3cold
    pci 0000:04:00.0: PME# disabled
    pci 0000:00:1c.1: PCI bridge to [bus 04-04]
    pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
    pci 0000:00:1c.1: bridge window [mem 0xf0000000-0xf3ffffff]
    pci 0000:00:1c.1: bridge window [mem 0xfa000000-0xfbffffff 64bit pref]
    pci 0000:00:1c.2: PCI bridge to [bus 06-06]
    pci 0000:00:1c.2: bridge window [io 0x5000-0x5fff]
    pci 0000:00:1c.2: bridge window [mem 0xf4000000-0xf7ffffff]
    pci 0000:00:1c.2: bridge window [mem 0xfc000000-0xfdffffff 64bit pref]
    pci 0000:00:1c.3: PCI bridge to [bus 08-08]
    pci 0000:00:1c.3: bridge window [io 0x6000-0x6fff]
    pci 0000:00:1c.3: bridge window [mem 0xb4000000-0xb7ffffff]
    pci 0000:00:1c.3: bridge window [mem 0xc8000000-0xc9ffffff 64bit pref]
    pci 0000:00:1c.4: PCI bridge to [bus 0a-0a]
    pci 0000:00:1c.4: bridge window [io 0xf000-0x0000] (disabled)
    pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff] (disabled)
    pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    pci 0000:0c:00.0: reg 10: [mem 0xf8000000-0xf8003fff]
    pci 0000:0c:00.0: supports D1 D2
    pci 0000:0c:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
    pci 0000:00:1c.5: PCI bridge to [bus 0c-0c]
    pci 0000:00:1c.5: bridge window [io 0xf000-0x0000] (disabled)
    pci 0000:00:1c.5: bridge window [mem 0xf8000000-0xf80fffff]
    pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    pci 0000:0e:06.0: proprietary Ricoh MMC controller disabled (via firewire function)
    pci 0000:0e:06.0: MMC cards are now supported by standard SDHCI controller
    pci 0000:0e:06.0: reg 10: [mem 0xf8100000-0xf81007ff]
    pci 0000:0e:06.0: supports D1 D2
    pci 0000:0e:06.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:0e:06.0: PME# disabled
    pci 0000:0e:06.1: reg 10: [mem 0xf8100800-0xf81008ff]
    pci 0000:0e:06.1: supports D1 D2
    pci 0000:0e:06.1: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:0e:06.1: PME# disabled
    pci 0000:0e:06.2: reg 10: [mem 0xf8101000-0xf81010ff]
    pci 0000:0e:06.2: supports D1 D2
    pci 0000:0e:06.2: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:0e:06.2: PME# disabled
    pci 0000:00:1e.0: PCI bridge to [bus 0e-0e] (subtractive decode)
    pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
    pci 0000:00:1e.0: bridge window [mem 0xf8100000-0xf81fffff]
    pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
    pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
    pci_bus 0000:00: on NUMA node 0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
    ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    HEST: Table is not found!
    vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    vgaarb: loaded
    PCI: Using ACPI for IRQ routing
    PCI: pci_cache_line_size set to 64 bytes
    reserve RAM buffer: 0000000000002000 - 000000000000ffff
    reserve RAM buffer: 000000000009f800 - 000000000009ffff
    reserve RAM buffer: 000000005fed0000 - 000000005fffffff
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    HPET: 3 timers in total, 0 timers will be used for per-cpu timer
    hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    hpet0: 3 comparators, 64-bit 14.318180 MHz counter
    Switching to clocksource tsc
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp: PnP ACPI: found 10 devices
    ACPI: ACPI bus type pnp unregistered
    system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
    system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
    system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
    system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
    system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
    system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
    system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
    system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
    system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
    system 00:06: [io 0x0680-0x069f] has been reserved
    system 00:06: [io 0x0800-0x080f] has been reserved
    system 00:06: [io 0x1000-0x107f] has been reserved
    system 00:06: [io 0x1180-0x11bf] has been reserved
    system 00:06: [io 0x1640-0x164f] has been reserved
    system 00:06: [io 0xfe00] has been reserved
    system 00:06: [io 0xff00-0xff7f] has been reserved
    pci 0000:00:1c.4: BAR 14: assigned [mem 0x60000000-0x601fffff]
    pci 0000:00:1c.4: BAR 15: assigned [mem 0x60200000-0x603fffff 64bit pref]
    pci 0000:00:1c.5: BAR 15: assigned [mem 0x60400000-0x605fffff 64bit pref]
    pci 0000:00:1c.4: BAR 13: assigned [io 0x7000-0x7fff]
    pci 0000:00:1c.5: BAR 13: assigned [io 0x8000-0x8fff]
    pci 0000:00:1f.3: BAR 0: assigned [mem 0x60600000-0x606000ff]
    pci 0000:00:1f.3: BAR 0: set to [mem 0x60600000-0x606000ff] (PCI address [0x60600000-0x606000ff]
    pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x20000)
    pci 0000:00:01.0: PCI bridge to [bus 01-01]
    pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
    pci 0000:00:01.0: bridge window [mem 0xc4000000-0xc6ffffff]
    pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    pci 0000:00:1c.0: PCI bridge to [bus 02-02]
    pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
    pci 0000:00:1c.0: bridge window [mem 0xbc000000-0xbfffffff]
    pci 0000:00:1c.0: bridge window [mem 0xcc000000-0xcdffffff 64bit pref]
    pci 0000:00:1c.1: PCI bridge to [bus 04-04]
    pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
    pci 0000:00:1c.1: bridge window [mem 0xf0000000-0xf3ffffff]
    pci 0000:00:1c.1: bridge window [mem 0xfa000000-0xfbffffff 64bit pref]
    pci 0000:00:1c.2: PCI bridge to [bus 06-06]
    pci 0000:00:1c.2: bridge window [io 0x5000-0x5fff]
    pci 0000:00:1c.2: bridge window [mem 0xf4000000-0xf7ffffff]
    pci 0000:00:1c.2: bridge window [mem 0xfc000000-0xfdffffff 64bit pref]
    pci 0000:00:1c.3: PCI bridge to [bus 08-08]
    pci 0000:00:1c.3: bridge window [io 0x6000-0x6fff]
    pci 0000:00:1c.3: bridge window [mem 0xb4000000-0xb7ffffff]
    pci 0000:00:1c.3: bridge window [mem 0xc8000000-0xc9ffffff 64bit pref]
    pci 0000:00:1c.4: PCI bridge to [bus 0a-0a]
    pci 0000:00:1c.4: bridge window [io 0x7000-0x7fff]
    pci 0000:00:1c.4: bridge window [mem 0x60000000-0x601fffff]
    pci 0000:00:1c.4: bridge window [mem 0x60200000-0x603fffff 64bit pref]
    pci 0000:00:1c.5: PCI bridge to [bus 0c-0c]
    pci 0000:00:1c.5: bridge window [io 0x8000-0x8fff]
    pci 0000:00:1c.5: bridge window [mem 0xf8000000-0xf80fffff]
    pci 0000:00:1c.5: bridge window [mem 0x60400000-0x605fffff 64bit pref]
    pci 0000:00:1e.0: PCI bridge to [bus 0e-0e]
    pci 0000:00:1e.0: bridge window [io disabled]
    pci 0000:00:1e.0: bridge window [mem 0xf8100000-0xf81fffff]
    pci 0000:00:1e.0: bridge window [mem pref disabled]
    pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    pci 0000:00:01.0: setting latency timer to 64
    pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    pci 0000:00:1c.0: setting latency timer to 64
    pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
    pci 0000:00:1c.1: setting latency timer to 64
    pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    pci 0000:00:1c.2: setting latency timer to 64
    pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
    pci 0000:00:1c.3: setting latency timer to 64
    pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    pci 0000:00:1c.4: setting latency timer to 64
    pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
    pci 0000:00:1c.5: setting latency timer to 64
    pci 0000:00:1e.0: setting latency timer to 64
    pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
    pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
    pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
    pci_bus 0000:01: resource 1 [mem 0xc4000000-0xc6ffffff]
    pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
    pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
    pci_bus 0000:02: resource 1 [mem 0xbc000000-0xbfffffff]
    pci_bus 0000:02: resource 2 [mem 0xcc000000-0xcdffffff 64bit pref]
    pci_bus 0000:04: resource 0 [io 0x4000-0x4fff]
    pci_bus 0000:04: resource 1 [mem 0xf0000000-0xf3ffffff]
    pci_bus 0000:04: resource 2 [mem 0xfa000000-0xfbffffff 64bit pref]
    pci_bus 0000:06: resource 0 [io 0x5000-0x5fff]
    pci_bus 0000:06: resource 1 [mem 0xf4000000-0xf7ffffff]
    pci_bus 0000:06: resource 2 [mem 0xfc000000-0xfdffffff 64bit pref]
    pci_bus 0000:08: resource 0 [io 0x6000-0x6fff]
    pci_bus 0000:08: resource 1 [mem 0xb4000000-0xb7ffffff]
    pci_bus 0000:08: resource 2 [mem 0xc8000000-0xc9ffffff 64bit pref]
    pci_bus 0000:0a: resource 0 [io 0x7000-0x7fff]
    pci_bus 0000:0a: resource 1 [mem 0x60000000-0x601fffff]
    pci_bus 0000:0a: resource 2 [mem 0x60200000-0x603fffff 64bit pref]
    pci_bus 0000:0c: resource 0 [io 0x8000-0x8fff]
    pci_bus 0000:0c: resource 1 [mem 0xf8000000-0xf80fffff]
    pci_bus 0000:0c: resource 2 [mem 0x60400000-0x605fffff 64bit pref]
    pci_bus 0000:0e: resource 1 [mem 0xf8100000-0xf81fffff]
    pci_bus 0000:0e: resource 4 [io 0x0000-0xffff]
    pci_bus 0000:0e: resource 5 [mem 0x00000000-0xffffffff]
    NET: Registered protocol family 2
    IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    TCP: Hash tables configured (established 131072 bind 65536)
    TCP reno registered
    UDP hash table entries: 512 (order: 2, 16384 bytes)
    UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    NET: Registered protocol family 1
    PCI: CLS 64 bytes, default 64
    Unpacking initramfs...
    Freeing initrd memory: 1700k freed
    Simple Boot Flag at 0x38 set to 0x1
    apm: BIOS not found.
    Scanning for low memory corruption every 60 seconds
    audit: initializing netlink socket (disabled)
    type=2000 audit(1294159792.419:1): initialized
    highmem bounce pool size: 64 pages
    HugeTLB registered 4 MB page size, pre-allocated 0 pages
    VFS: Disk quotas dquot_6.5.2
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    msgmni has been set to 1723
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    io scheduler noop registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    intel_idle: MWAIT substates: 0x22220
    intel_idle: does not run on family 6 model 15
    ERST: Table is not found!
    isapnp: Scanning for PnP cards...
    isapnp: No Plug & Play device found
    Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    rtc_cmos 00:07: RTC can wake from S4
    rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
    rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    cpuidle: using governor ladder
    cpuidle: using governor menu
    TCP cubic registered
    NET: Registered protocol family 17
    Registering the dns_resolver key type
    Using IPI No-Shortcut mode
    PM: Resume from disk failed.
    registered taskstats version 1
    rtc_cmos 00:07: setting system clock to 2011-01-04 16:49:53 UTC (1294159793)
    Initalizing network drop monitor service
    Freeing unused kernel memory: 428k freed
    udev[38]: starting version 165
    input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    SCSI subsystem initialized
    libata version 3.00 loaded.
    ahci 0000:00:1f.2: version 3.0
    ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
    ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
    ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc
    ahci 0000:00:1f.2: setting latency timer to 64
    scsi0 : ahci
    scsi1 : ahci
    scsi2 : ahci
    ata1: SATA max UDMA/133 abar m2048@0xf8404000 port 0xf8404100 irq 40
    ata2: SATA max UDMA/133 abar m2048@0xf8404000 port 0xf8404180 irq 40
    ata3: SATA max UDMA/133 abar m2048@0xf8404000 port 0xf8404200 irq 40
    ata_piix 0000:00:1f.1: version 2.13
    ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
    ata_piix 0000:00:1f.1: setting latency timer to 64
    scsi3 : ata_piix
    scsi4 : ata_piix
    ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18a0 irq 14
    ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18a8 irq 15
    ata4.00: ATAPI: Slimtype DVDRW SSM-8515S, GS09, max UDMA/33
    ata4.00: configured for UDMA/33
    ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    ata2: SATA link down (SStatus 0 SControl 300)
    ata3: SATA link down (SStatus 0 SControl 300)
    ata1.00: unexpected _GTF length (8)
    ata1.00: ATA-8: ST9320423AS, 0002SDM1, max UDMA/133
    ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
    ata1.00: unexpected _GTF length (8)
    ata1.00: configured for UDMA/133
    scsi 0:0:0:0: Direct-Access ATA ST9320423AS 0002 PQ: 0 ANSI: 5
    scsi 3:0:0:0: CD-ROM Slimtype DVDRW SSM-8515S GS09 PQ: 0 ANSI: 5
    sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
    sd 0:0:0:0: [sda] Attached SCSI disk
    sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    cdrom: Uniform CD-ROM driver Revision: 3.20
    sr 3:0:0:0: Attached scsi CD-ROM sr0
    EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
    Not activating Mandatory Access Control now since /sbin/tomoyo-init doesn't exist.
    udev[839]: starting version 165
    input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
    ACPI: Lid Switch [LID0]
    input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
    ACPI: Power Button [PWRB]
    input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
    ACPI: Power Button [PWRF]
    ACPI: acpi_idle registered with cpuidle
    Monitor-Mwait will be used to enter C-1 state
    Monitor-Mwait will be used to enter C-2 state
    Monitor-Mwait will be used to enter C-3 state
    Marking TSC unstable due to TSC halts in idle
    input: PC Speaker as /devices/platform/pcspkr/input/input4
    Switching to clocksource hpet
    compal-laptop: Identified laptop model 'FL90/IFL90'
    cfg80211: Calling CRDA to update world regulatory domain
    compal-laptop: Driver 0.2.7 successfully loaded
    i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
    Linux agpgart interface v0.103
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    iTCO_vendor_support: vendor-support=0
    sdhci: Secure Digital Host Controller Interface driver
    sdhci: Copyright(c) Pierre Ossman
    shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    sdhci-pci 0000:0e:06.1: SDHCI controller found [1180:0822] (rev 22)
    sdhci-pci 0000:0e:06.1: PCI INT B -> GSI 23 (level, low) -> IRQ 23
    sdhci-pci 0000:0e:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
    Registered led device: mmc0::
    mmc0: SDHCI controller on PCI [0000:0e:06.1] using DMA
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    sr 3:0:0:0: Attached scsi generic sg1 type 5
    ACPI: Battery Slot [BAT1] (battery present)
    ACPI: WMI: Mapper loaded
    ACPI: AC Adapter [ACAD] (on-line)
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    acpi device:03: registered as cooling_device2
    input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input5
    ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
    b43-pci-bridge 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    b43-pci-bridge 0000:0c:00.0: setting latency timer to 64
    ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x11, vendor 0x4243)
    ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0A, vendor 0x4243)
    ssb: Core 2 found: USB 1.1 Host (cc 0x817, rev 0x03, vendor 0x4243)
    ssb: Core 3 found: PCI-E (cc 0x820, rev 0x01, vendor 0x4243)
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    ehci_hcd 0000:00:1a.7: setting latency timer to 64
    ehci_hcd 0000:00:1a.7: EHCI Host Controller
    ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
    ehci_hcd 0000:00:1a.7: debug port 1
    ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
    ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf8404800
    ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 4 ports detected
    ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    ehci_hcd 0000:00:1d.7: setting latency timer to 64
    ehci_hcd 0000:00:1d.7: EHCI Host Controller
    ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
    ehci_hcd 0000:00:1d.7: debug port 1
    ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
    ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8404c00
    ssb: Sonics Silicon Backplane found on PCI device 0000:0c:00.0
    ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 6 ports detected
    firewire_ohci 0000:0e:06.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
    iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
    iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    psmouse serio1: ID: 10 00 64
    firewire_ohci: Added fw-ohci device 0000:0e:06.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x1
    uhci_hcd: USB Universal Host Controller Interface driver
    uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    uhci_hcd 0000:00:1a.0: setting latency timer to 64
    uhci_hcd 0000:00:1a.0: UHCI Host Controller
    uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
    uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
    uhci_hcd 0000:00:1a.1: setting latency timer to 64
    uhci_hcd 0000:00:1a.1: UHCI Host Controller
    uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
    uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    uhci_hcd 0000:00:1d.0: setting latency timer to 64
    uhci_hcd 0000:00:1d.0: UHCI Host Controller
    uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
    uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840
    hub 5-0:1.0: USB hub found
    hub 5-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    uhci_hcd 0000:00:1d.1: setting latency timer to 64
    uhci_hcd 0000:00:1d.1: UHCI Host Controller
    uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
    uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860
    hub 6-0:1.0: USB hub found
    hub 6-0:1.0: 2 ports detected
    uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    uhci_hcd 0000:00:1d.2: setting latency timer to 64
    uhci_hcd 0000:00:1d.2: UHCI Host Controller
    uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
    uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880
    hub 7-0:1.0: USB hub found
    hub 7-0:1.0: 2 ports detected
    tg3.c:v3.113 (August 2, 2010)
    tg3 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    tg3 0000:04:00.0: setting latency timer to 64
    tg3 0000:04:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
    usb 1-2: new high speed USB device using ehci_hcd and address 2
    tg3 0000:04:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
    elantech: assuming hardware version 1, firmware version 2.0.4
    tg3 0000:04:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
    tg3 0000:04:00.0: eth0: Tigon3 [partno(none) rev b002] (PCI Express) MAC address 00:1b:38:55:15:a4
    tg3 0000:04:00.0: eth0: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1])
    tg3 0000:04:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
    tg3 0000:04:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
    elantech: Synaptics capabilities query result 0x10, 0x02, 0x64.
    HDA Intel 0000:00:1b.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    HDA Intel 0000:00:1b.0: irq 41 for MSI/MSI-X
    HDA Intel 0000:00:1b.0: setting latency timer to 64
    input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
    firewire_core: created device fw0: GUID 00023f79b240229a, S400
    b43-phy0: Broadcom 4311 WLAN found (core revision 10)
    nvidia: module license 'NVIDIA' taints kernel.
    Disabling lock debugging due to kernel taint
    phy0: Selected rate control algorithm 'minstrel_ht'
    Registered led device: b43-phy0::tx
    Registered led device: b43-phy0::rx
    Registered led device: b43-phy0::radio
    Broadcom 43xx driver loaded [ Features: PMLS, Firmware-ID: FW13 ]
    input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input7
    Linux video capture interface: v2.00
    uvcvideo: Found UVC 1.00 device USB 2.0 Camera (04f2:b018)
    input: USB 2.0 Camera as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input8
    usbcore: registered new interface driver uvcvideo
    USB Video Class driver (v0.1.0)
    nvidia 0000:01:00.0: power state changed by ACPI to D0
    nvidia 0000:01:00.0: power state changed by ACPI to D0
    nvidia 0000:01:00.0: enabling device (0000 -> 0003)
    nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    nvidia 0000:01:00.0: setting latency timer to 64
    vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
    NVRM: The NVIDIA GPU 0000:01:00.0 (PCI ID: 10de:0407) installed
    NVRM: in this system is not supported by the 260.19.29 NVIDIA Linux
    NVRM: graphics driver release. Please see 'Appendix A -
    NVRM: Supported NVIDIA GPU Products' in this release's README,
    NVRM: available on the Linux graphics driver download page at
    NVRM: www.nvidia.com.
    nvidia: probe of 0000:01:00.0 failed with error -1
    NVRM: The NVIDIA probe routine failed for 1 device(s).
    NVRM: None of the NVIDIA graphics adapters were initialized!
    EXT4-fs (sda2): re-mounted. Opts: (null)
    EXT4-fs (sda2): re-mounted. Opts: (null)
    EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
    fuse init (API version 7.15)
    Adding 3156768k swap on /dev/sda3. Priority:-1 extents:1 across:3156768k
    nvidia 0000:01:00.0: setting latency timer to 64
    vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=none,decodes=none:owns=io+mem
    NVRM: The NVIDIA GPU 0000:01:00.0 (PCI ID: 10de:0407) installed
    NVRM: in this system is not supported by the 260.19.29 NVIDIA Linux
    NVRM: graphics driver release. Please see 'Appendix A -
    NVRM: Supported NVIDIA GPU Products' in this release's README,
    NVRM: available on the Linux graphics driver download page at
    NVRM: www.nvidia.com.
    nvidia: probe of 0000:01:00.0 failed with error -1
    NVRM: The NVIDIA probe routine failed for 1 device(s).
    NVRM: None of the NVIDIA graphics adapters were initialized!
    last lines looks interesting, but I also checked mentioned Appendix A of README, and I found 8600M GT (PCI ID 0x0407) between supported chips.

  • [SOLVED] Address space collision after kernel 3.0 upgrade

    After upgrading to linux 3.0.1 I get the following error messages from kernel:
    kernel: [ 0.313527] pci_root PNP0A08:00: address space collision: host bridge window [mem 0x000cc000-0x000cffff] conflicts with Video ROM [mem 0x000c0000-0x000ce9ff]
    kernel: [ 0.313537] pci_root PNP0A08:00: address space collision: host bridge window [mem 0x000d0000-0x000d3fff] conflicts with Adapter ROM [mem 0x000cf000-0x000d0fff]
    Anyone having similar issues? What could this be related to?
    Everything seems to work fine so far... but this message is making me a little nervous....
    Last edited by king.flasher.dave (2011-08-31 14:20:33)

    The kernel is reporting a BIOS bug (in the DSDT table). Many BIOS tables say nonsense things like two pieces of hardware being addressable at the same location of memory.  Most likely it's been that way all along, but over time the kernel devs check for more of these things, thus new error messages come out.
    If all of your hardware still works, then you can ignore it. Otherwise, you can try upgrading BIOS firmware in the hope that a newer version doesn't have the bug. (Or you can correct the table yourself and get the kernel to use the corrected copy from disk instead of the one in firmware, but I've found that to be very hard to accomplish.)

  • 3 Beep when i try to boot Snow Leopard (after memory and sad upgrade)

    Good night,
    I have a Macbook Pro Later 2011 with Yosemite installed and today i tried to upgrade memory and SSD.
    Memory: 16GB 1600MHz DDR3 (2x8) Corsair 11-11-11-30 1.35v
    SSD: Corsair 120GB Sata 3 Force GT
    After installation of my new gear, i tried to install OS X Snow Leopard through DVD and i get this 3 beep when boot start.
    So i reinstalled the original hard drive, keep the new 16gb and started correctly.
    Tried boot DVD again with the original hard drive and new 16gb but the 3 beep continues...
    Then i removed the 16gb, but still doing this 3 beep stuff when i try boot from DVD.
    I tried all combinations with new and old hardware but nothing more works...
    I have changed the slots with both, the 16gb and old 4gb.
    Could be the DVD corrupted?
    Now im running my Yosemite with the original hard drive and the new 16gb memory without any issue.
    Im already do the memory test nothing wrong appear in results
    My configuration:
    MacBook Pro (17 polegadas, Final de 2011)
    Processador 2,4 GHz Omte; Cpre i7
    Memória 16 GB 1600 MHz DDR3
    Gráficos Intel HD Graphics 3000 512 MB
    Could anyone help me plz?
    ps. sorry for my english

    The DVD's too old for that Mac. If you need to install an OS on it, connect it to the Internet and start it up with the Option, Command, and R keys held down.
    (110037)

  • Activation issues after restore and OS upgrade

    IPAD was disabled. Only option I had was restore. After restore, it offered to upgrade the OS which I accepted. Now, Activating IPAD requires my apple id which is ******@icloud.com. I don't even remember creating any account on icloud.com. I have tried to retrieve it unsuccessfully from Forgot Apple ID link. Any suggestions? workarounds? Many Thanks in advance.

    You will not be able to re-activate your iPad if you do not remember the old Apple ID and Password.
    This is the new security feature of IOS 7.

  • Iphoto will not launch after lion and iPhoto upgrade

    "your iPhoto library is either in use by another application or has become unreadable
    Shut down and restart your computer, and then open iPhoto again. If the problem persists, try rebuilding your photo library. To do this, quit iPhoto, and then reopen it while keeping the Option and Command keys pressed. You can also try restoring your photo library from a backup.
    This is the message i get after paying apple3 0 dollars for the lion upgrade and 14.99 iphoto upgrade. Can you now help fix?? you have my money. Now give me back my computer

    Do as the instructions tell you.
    Hold down the Option and Command keys and launch iPhoto at the same time.
    You'll see a dialog box open.
    Select:   Repair Database
    Or, restore from a backup.
    FYI, Apple's policy states that, "all sales are final" >  iTUNES STORE - MAC APP STORE - TERMS AND CONDITIONS

  • Zen Xtra 40G - PC Not Recognizing Unit after Firmware and Driver upgrade

    I own a Zen Xtra 40G unit and have just recently upgraded the firmware to the latest version (.20.08). I then proceeded to upgrade to the latest Windows XP driver (.26.02) and after reboot, the system no longer recognized my jukebox.
    I tried my room mates, still on an older version of the firmware, and his worked without a problem.
    In order to check and see if it was a one time fluke, I uninstalled both the driver and Creative MediaSource and re-installed from the original CD.
    Again, my jukebox (still with the new firmware) worked flawlessly. I then upgraded Media Source to the latest version (2.03.09) and rebooted only to find my jukebox still worked perfectly.
    I then downloaded and installed the latest Windows driver again (.26.02) and rebooted. My PC stopped recognizing my jukebox again but my buddie's still worked without a problem.
    Is there a known flaw with the Windows driver and the latest firmware version.
    Could Creative fix the problem or let me know if there is a setting I need to change in order for my PC to recognize my jukebox under the latest software and drivers?

    So am I to assume from that message you think I should revert back to the old driver?
    Of course Technical Support was no help. Sometimes I think they either a) don't read English very well or b) don't read the entire e-mail.
    Here's what they wrote:
    <EM>With regards to the issue you are having, may I enquire on the programwhich you used after applying the Windows update that informed you thatthe player is not connected. In the meantime, please try downloading these two files and see if ithelps:Below is the link for the latest drivers/applications updates.</EM><A href="]<EM>http://us.creative.com/support/downloads/</EM>[/url]<EM>Select MP3 Players -> Zen -> Zen XtraSelect Windows XPThe files are Creative MediaSource Software Update version 2.03.29 (39.46 MB)Filename: CMS_PCAPP_LB_2_03_29.exeThis software update allows you to manage your Creative NOMAD? playerwith the latest version of Creative MediaSource?, an advancedfull-featured media player.2) NOMAD JukeBox Type 2 Version .0.03 (English) Web Release (7.70 MB)Filename: JBTII_PCAPP_LB__0_03.exeThis software update is for Creative Zen and Creative NOMAD? Jukeboxowners who have installed Creative MediaSource? (version .00.54 orlater) on their computers.Please email us if you have any further questions or comments. Thankyou.For faster service please reply with previous correspondence whenreplying to this email.</EM>
    Had they read my e-mail, they wouldn't have pointed my to software I had already DOWNLOADED and INSTALLED!!! Oh well... we'll see what tomorrow's answer brings.

  • After ML and AP upgrade AP won't close.

    This morning I upgraded ML and AP to the latest updates. First time I opened AP it immediately crashed.  Opened again and it had a warning window stating my database needed to be repaired and it might take sometime.  Hours later AP is still open and I can't close it. X and Quit Aperture are not functioning.  Also some images are distorted when they are viewed.  Any suggestions?

    I update to EFI 1.1 also. I was not able to boot into windows through bootcamp. It hangs on the gray screen. I try to use the option boot so it will show up the partition. Selecting Mac OS X boots fine, but when selecting windows, the mouse and screen freezed. So i tried PRAM clearing. same thing. Then I set the startup disk to Windows (in OS X preference) and I tried to press and hold power button until it finally boot into windows. Not sure what it did, but it's now works fine.

  • ITouch stuck in recovery mode after iTunes and firmware upgrades

    my iTouch has hung in recovery mode and will not restore after I updated to iTunes 7.7.1.11 and tried to update the firmware suggested on iTunes Summary screen after launching the new iTunes. The firmware I was at was 1.1.4 and iTunes was offering the update to 1.1.5. Now the iTouch is stuck.
    i have tried the restore function, removed/reinstalled all Apple software, the iTouch resetting procedure (hold power & home buttons together), NOTHING WORKS.
    HELP
    Thanks,
    nitefisher

    I am having problems similar to this. After the ITUNES 7.7.1 upgrade and the ITOUCH 2.0.1 upgrade, ITUNES thinks the ITOUCH is is recovery mode and it must be restored. If you use the ITOUCH it works fine. I have recovered at least 10 times over the last 2 days. The ITUNES syncs sometimes and says restore is necessary sometimes. Various other errors pop up too. "The Ipod could not be restored. An unknown error occurred(6)" is just one of the errors. I wish I could back out the software because the hardware is fine. I suspect bugs in ITUNES. It's bad enough you have to pay for the ITOUCH upgrades but they have errors in them too. I've read numerous variations of this in the last 7 days with no clear fixes. Even the problems I am having are not consistant. If anyone has a clue let me know. Thanks.

  • Can't print after iTunes and Quicktime upgrade

    I installed the upgrades to iTunes 7.1 and Quicktime 7.1.5. Now none of my applications can print to any of my printers. The behavior is that the print window appears normal, and I can "Save to pdf". When I click "Print" the appllication pops up an error message saying that printing is not possible. Eudora says it was trying to "allocate a GrafPort". the other apps give an uninformative message. I've tried both Apple and non-Apple apps. I haven't found an app that can print to any of my 3 priinters - 2 via USB, 1 via network connection.
    I've reinstalled both upgrades and 10.4.8 and Security and patch. I've repaired permissions. The drivers are up to date. I zapped the PRAM. I can still print from my bootable backup. I've tried to use Fixamac's Printer Server Repair utility. It runs on the bootable backup, but it rejects my user passwords on the broken system (i.e., I can't run it)
    I can live with the bootable backup for awhile, but I'd appreciate any advice for tracking down and fixing the problem.

    in the CUPS error log I see several instances of the following
    [09/Mar/2007:22:36:58 -0500] Full reload complete.
    I [09/Mar/2007:22:54:03 -0500] Scheduler shutting down normally.
    I [09/Mar/2007:22:55:24 -0500] Listening to 0:631
    I [09/Mar/2007:22:55:24 -0500] Listening to 300f70:0
    I [09/Mar/2007:22:55:24 -0500] Loaded configuration file "/private/etc/cups/cupsd.conf"
    I [09/Mar/2007:22:55:24 -0500] Configured for up to 100 clients.
    I [09/Mar/2007:22:55:24 -0500] Allowing up to 100 client connections per host.
    I [09/Mar/2007:22:55:24 -0500] Full reload is required.
    E [09/Mar/2007:22:55:24 -0500] LoadAllClasses: Unable to open /private/etc/cups/classes.conf - No such file or directory
    Could this missing file be the source of my problem?

Maybe you are looking for

  • Trivia Game: Error while testing CS3 app in CS4

    I have been attempting to test an exercise file for a Trivia Game written in AS3 using the Flash CS3 IDE. Unfotunately I have been receiving two errors each time its run while using Flash Professional CS4.: <ol> <li><strong> 1023: Incompatible overri

  • Purchase order - output type vendor different from PO vendor

    Hello, we have created a new output type that sends our purchase order as emails. The email will be sent to the vendor email address that is entered together with the output type under messages of a purchase order. We need the emails to be sent an in

  • Why is Compressor so Slow?

    I love Apple software, and Compressor is no exception.  For converting and compressing video, there isn't a tool out there that surpasses it.  However, there is one major complaint that I have.  While the rendering process of the video itself is rela

  • File change for highest level page home page

    file change for highest level page home page When I got these files I would type server/mywork/bkb These files are in the server under the folders mywork/bkb When I type server/mywork/bkb The my index page would show up That's fine. Now, I created a

  • Blackberry curve 8520 Reload Software:552

    Hello guys I have been looking for this problem and how to fix it, but I found out that they all never helped or don't have many details ..Etc  OK let me start from the problem : It was this morning when I was out sitting and my bbm didn't work so I