After kernel update, every reboot changes the time forward an hour

can some one upload a stock /etc/rc.sysinit i can look at. before the kernel upgrade, i had optimized this file, and i have a feeling something that i removed to speed up time. has just started causing problems with the new kernel.
Thanks Markp1989

The file is part of the initscripts package, you can get it here:
ftp://ftp.archlinux.org/other/initscripts/
However, perhaps your issue is related to:
http://bbs.archlinux.org/viewtopic.php?id=70710

Similar Messages

  • Every time I connect my ipod touch to itunes it changes the time to three hours ahead how can I stop this

    can't stop itunes from changing the time on my ipod when I sync to computer

    yeah and the time is correct.  I was thinking there is a setting on itunes or something like that

  • After kernel update to .37 changeg the profiles in konsole

    i want to fix em ... but when i am open again konsole or yakuake the default profile is shown ...
    i use a custom profile ....

    isofluran wrote:Again, as I metioned before, the problem is likely not a hardware one but it is actually related to the kernel update (2.6.19)  or to an update which was performed at the same time.
    Can anyone give a proposal for a step by step procedure to isolate the problem?
    As I don't believe these crashes are related to anything but the kernel, one way of debugging your issues could be:
    * boot Knoppix
    * zcat /proc/config.gz | some non-volatile media
    * boot arch
    * get the current ABS
    * replace config in kernels/kernel26 with the one from Knoppix
    * makepkg
    * install and test
    When that kernel runs, try to diff the two configs and see what's changed in arch. Also comparing both kernel versions if no significant changes exist might hint on the kernel being the problem.

  • I just fix my macbook air because it was kernel panic. They changed the hard drive. I could not back up with Time Machine, because it did not work and I had over Adobe creative suite 5 design premium student. But I finished my studies last year and I'd li

    I just fix my macbook air because it was kernel panic. They changed the hard drive. I could not back up with Time Machine, because it did not work and I had over Adobe creative suite 5 design premium student. But I finished my studies last year and I'd like to know how to get the serial number for me to reinstall Adobe creative suite 5 design premium when I am no longer study because I would still like the used? It is not fair if I do anymore because I really need.

    You can download Creative Suite 5 here:
    Other downloads
    To deal with the issue of the serial number and using it again, you'll have to use Web Chat. Here's a link:
    Adobe ID, sign in, and account help
    See the bottom of the page for a link

  • In Win 7 64bit I get the following error upon every reboot.  "The procedure entry point xmlTextReaderConstName could not be located in the dynamic link library "    This happened yesterday, 8/23/2011 after downloading Apple iTunes 10.4.

    This happened yesterday, 8/24/2011 after downloading Apple iTunes 10.4. In Win 7 64bit I get the following error upon every reboot.  "The procedure entry point xmlTextReaderConstName could not be located in the dynamic link library libxml2.dll"    Please how do I fix this, Thanks.

    In the case that your OS is Windows 7 (64 bit)
    1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    2. Copy file "libxml2.dll"
    3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
    4. Paste file "libxml2.dll" to the location.
    5. Reboot your computer, it should not display that message, it should be clear.
    Good Luck

  • My macbook pro keeps going to screensaver after about 3 mins while watching a movie, i tried changing the time on the "Energy saver" menu in system preferences but it keeps doing it, how do i stop this?

    my macbook pro keeps going to screensaver after about 3 mins while watching a movie, i tried changing the time on the "Energy saver" menu in system preferences but it keeps doing it, how do i stop this?

    Deleting the System Preference or other .plist file
    Install Caffine.
    http://lightheadsw.com/caffeine/

  • So my iPhone 4S started draining battery after recent update, battery got changed and it worked perfect for 3 days, all of a sudden the phone won't stay on unless connected to mains... Cannot receive any signal "searching" constantly. HELP

    So my iPhone 4S started draining battery after recent update, battery got changed and it worked perfect for 3 days, all of a sudden the phone  shut down and now won't stay on unless connected to mains... Claims its at 100% battery but thats impossible as it was at 30% before it shut down randomly.
    Cannot receive any signal "searching" constantly.
    Turns off as soon as removed from usb ... wont stay on connected to laptop!
    HELP!

    The iPhone includes a one year warranty. If an Apple store is not nearby, you can call AppleCare and handle an exchange under warranty over the phone. The exchange will be shipped to your door - someone must sign for the delivery so if no one will be at home, have it delivered where you work. You use the same box to return the existing iPhone back to Apple. Return shipping label and tape to reveal the box incuded - call the carrier with number incuded when the box is ready to be picked up. AppleCare will request a credit card in the event the existing iPhone is not returned within 10 days after the exchange under warranty is received.
    Hardware can fail - it happens, which is why there is a one year warranty.

  • How can I change the time of day that Automatic Updates installs?

    In Yosemite, you can choose to have apps and/or OS X system updates install automatically when available.  http://support.apple.com/en-gb/HT201541 says this happens 'overnight'. It's unclear whether this means the computer has to be left on overnight for the update to happen, but I'm assuming it does.
    Is there any way of changing the time when the updates are installed? Could I set it to happen in the morning so I don't have to leave the computer on all night?

    In Yosemite, you can choose to have apps and/or OS X system updates install automatically when available.  http://support.apple.com/en-gb/HT201541 says this happens 'overnight'. It's unclear whether this means the computer has to be left on overnight for the update to happen, but I'm assuming it does.
    Is there any way of changing the time when the updates are installed? Could I set it to happen in the morning so I don't have to leave the computer on all night?

  • AFTER I UPDATED MY I PHONE THE NAME LIST CANT BE APPEAR FOR 15 MORE TIMES A DAY

    AFTER I UPDATED MY I PHONE THE NAME LIST CANT BE APPEAR FOR 15 MORE TIMES A DAY

    1.  Stop SHOUTING AT US.  It's rude.
    2.  What is the "name list" and where is it supposed to appear each day?

  • Mounting issues after kernel update (2.6.25)

    After installing the recent kernel update, mounting has gone haywire. When I put in a cd (in either of my 2 drives) it doesn't mount. In thunar, when I click on the cd drive, it displays this error:
    mount: wrong fs type, bad option, bad superblock on /dev/sr0,
           missing codepage or other error
           In some cases useful info is found in syslog - try
           dmesg | tail  or so.
    I did dmesg | tail and I got this:
    EXT3-fs: mounted filesystem with ordered data mode.
    Adding 1044216k swap on /dev/sda5.  Priority:-1 extents:1 across:1044216k
    eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
    ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
    ivtv0: Encoder revision: 0x02060039
    [drm] Initialized drm 1.1.0 20060810
    ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:00:02.0 to 64
    [drm] Initialized i915 1.6.0 20060119 on minor 0
    UDF-fs: No VRS found
    Also, when booting a few minutes ago, it was stuck on the "checking filesystems" for a few minutes, when it usually does that step almost immediately. I also couldn't mount an iso, this is what happened:
    [root@eric-arch eric]# mount -o loop -t iso9660 /path/to/iso.iso /mnt/iso2
    mount: could not find any device /dev/loop#
    Note: I am not certain that it was caused by the kernel update, but that is the only thing I did to my machine before this started happening.
    Please help asap because I need to do schoolwork which is on a cd.

    jealma wrote:I know the solution to the /dev/loop-problem. The new 2.6.25 kernel has the loop device as a module. Please try a `modprobe loop`, that gives you a /dev/loop. I don't know whether that will be persistent after a reboot, so you may need to add "loop" to the modules-list in /etc/rc.conf.
    That worked, but I still have other issues with cd mounting, so I downgraded my kernel for now.

  • In the latest iOS updates, did Apple change the way Airplay communicate with other devices through Wifi?

    Short :
    In the latest iOS updates, did Apple change the way Airplay communicate with other devices through Wifi?
    Detailed:
    We had a glitch with our Apple TV 3A 3-4 weeks ago and had to factory reset it (we reconfigured it with the exact same configuration than before the crash), it's now running iOS 7.0.2, I can't saw which version it ran before the problem though.
    It's used in a business environment with 30+ iPads 2, half of them are updated to 8.1.1 and the other half to 8.1.2. We use the latest iTunes version.
    Before the glitch that required a reset, all the iPads were detecting and mirroring when needed to the Apple TV, but now the iPads don't see the Apple TV in their list of Airplay devices anymore (but they detect various other devices inside our network).
    I have to add that our Apple TV is able to navigate the movie store correctly, so I assume that it's not an internet restriction issue from our end (also, the APple TV do not see either any of the many iPads on its device-detection screen.
    We successfully connected an iPhone 5S and an iPhone 6 through P2P Airplay, so it's not the issue, but when we connected the iPhones to our Wifi network (Same as all the other devices are using) the Apple TV suddenly disappeared from the choices.
    Hence the reason why I inquire to the possibility that some changes were made in one of the latest iOS revisions, if so, we would require some details so we can adjust our Wifi configuration accordingly to allow the proper detection of devices.
    P.S. I tried the basic troubleshooting of Airplay problems with no avail. Airplay button is displaying on the control panel, Airplay do not show the Apple TV at all (so it's not either the trick to display the Mirroring button), we also already proceeded to the suggested devices reboots, so my issue is quite more complex I believe.
    Thanks in advance.

    PhotogYogi wrote:
    I Have the same issue on a brand new iPad mini 2. My battery is only lasting up to 5 hours. I went on chat with Apple last night and they said my battery is fine and its a Safari issue. I'm literally losing 1% every 3-4 minutes. I tried recalibrating my battery, signing out of iCloud, shutting off all locations, turning off background app refresh, restoring network settings, restoring all, and finally restoring from iTunes with no luck. This is just awful. I got this iPad so I could use it on my long flight for a trip I have coming up, and unfortunately, it's not going to last that long, plus I'm concerned about how many times i will be recharging my battery because of this since battery's do have a life cycle dependent on the number of charges. This is frustrating and needs to be fixed ASAP and addressed by Apple.
    By the way, Apple told me to bring my device to the Apple Store because it's still under warranty. That's great and all, but I'm going to waste my time if there is no fix for this issue.
    Ok so you want Apple to address the problem, but yet you don't want to take it to them just in case they can't fix it? What if they can fix it? Complaining here certainly won't fix it.

  • Changing the time stops iMessage working

    When travelling abroad, if you manually change the time, iMessage no longer works.
    Even worse, it confirms that a sent message has been delivered.
    Setting the time back to the home country, starts iMessage working again.

    The bug affects either mode of selection. This happens after a while, it's random. Sometimes immediately, sometimes after I change the color of a few items. Very repeatable. I'm using Pages for a highly specific project, creating maps. I use colors on symbols (a character from the Symbol font) for objects on the map. I have to quit and re-open every time I change a color. I hope for some random reason 10.5.3 or the next update of iWork fixes this. I will report back when updates are released.

  • Lost network after kernel update

    Hi
    I have lost my network after kernel updating the kernel [2.6.35.7]
    I downgraded to kernel 2.6.35.6
    Serge

    krychle wrote:
    Hi,
    I'm just reporting that I had this issue today too. I rebooted my computer from Win7 to Arch64 and I was left without network. Also it doesn't work in windows after rebooting back. I thought that It is something with connection so I tried to recoonect cable and also tryied to swap it in switch/adsl gateway. It started working after several switches (not on 1st!) It looks like interface is repeating on and off. So I rebooted to Arch and it stops working again...
    I fixed it by reinstalling kernel26 package. But it is strange because it works yesterday, last thing what I did with kernel and modules was update of gc nvidia drivers... I don't know when I updated kernel last time
    I'm using same network driver as Karol - r8169
    lsmod | less
    mii                     3826  1 r8169
    I'm using this card as well.  I upgraded yesterday and I can't get wireless with WICD.  Windows and normal network daemon work fine.  I use kernel26.  What other info can I provide?  If a bug report needs to be filed, would it be WICD, kernel26 or other?
    Also, I forgot, but I'm not using normal Wicd, I'm using wicd-nogtk from AUR.  Krychle, are you using this also?
    Edit:  I think this has to do with the python update.  I updated wicd-nogtk and its good now.  I am online.
    Last edited by Anonymo (2010-10-19 18:10:23)

  • CUCM 8.6.2 - IP Phone 7940/7960 don´t change the time when finish DST

    Hi Guys,
    My Customer is having the problem about DST (date summer time) specifically about IP Phone 7940 and 7960. When finish the date summer time this model don´t change the time, only after restart logical or phisical. I simulated the problem in the CUCM with the same version 8.6.2.22900-9 and the problem too occur. I did the following procedure to try solve the problem:
    1) Put the lastest version firmware about IP Phone and didn´t worked;
    2) Put the lastest version dst and didn´t worked;
    I search about any bug related and didn´t found nothing.
    Any have idea about this?
    Thanks,
    Wilson                  

    Hi Wilson,
    Try installing TZ updates with steps in the document:
    http://software.cisco.com/download/release.html?mdfid=283782839&flowid=45898&softwareid=282074298&release=8.6%282-2013d%29&relind=AVAILABLE&rellifecycle=&reltype=latest
    Please find the link for EOS and SW Maintenance for 7960
    http://www.cisco.com/en/US/prod/collateral/voicesw/ps6788/phones/ps379/end_of_life_notice_c51-574072.html
    Hope this helps!!
    Regards.
    Tirtha

  • How do you change the time of an appointment in the new calendar Monday defaults to 10am tuesday one minute past and sunday 1 minute before

    Installed Ios 7 and new calendar does not allow me to change the time of appointments .
    Ie Monday 7th October try to put appointment in and gives me 10am day before 9:59am day after 10:01am.

    Wow!
    I'm not going to be of much use regarding answers but I sure am going to watching this post like a hawk for any replies. My package is a slightly diluted version of this and I do find the BBtalk and data limits hard to make the most of as well.
    If nothing else this totally highlights how complicated BT have managed to make their packages.
    A cynic would assume that they are trying to catch us out at every step and for us to either be overspending or not really getting the moneys worth.

Maybe you are looking for