After las update some menus doesn't work properly. Ther is non possibility to use mouse. Why?

After las update (9.2.1) some menus doesn't work properly. Ther is non possibility to use mouse. Why?

Operating System?

Similar Messages

After the updating my map couldn't work properly

After the updating my maps couldn't work properly

Wipe the drive clean and install Snow Leopard from your install disk.
Might be less work fixing Safari. Try Resetting Safari.

After last update my iphone doesn't work as a USB modem anymore

Hi,
I installed some softwareupdate to my MacBook Air today - and now my iPhone doesn't work as a USB modem anymore. Connecting via Wifi works. But this drains too much batteries - and USB usually works more consistant for me (and it connects a lot faster). What can I do?

Hi Sonja
I am facing same problem in my macbook pro still not get any reply from apple or any one els
Rizwan

Satellite L300-26K - After BIOS update the touchpad doesn't work anymore

Hi,
like recommended by tempro, I updated BIOS from ver.2.1 to 2.2 (windows-Version). After rebooting, touchpad incl. tips doesnt work anymore. In bios touchpad is enabled, in system it says unit is working properly. FN/F9 makes no effect. Reinstalling synaptics drivers - no effect - still dead.
Satellite L300-26K
Using Vista 32bit home
How can I restore BIOS to 2.1 again? (if i try the windows-bios utility from V2.1 it says it is still installed - so I cannot downgrade by this easy way)
Please help - I need my notebook without external mouse (this works)
yours
Oliver
Message was edited by: enigmo

Hi enigmo,
I cant imagine that this happened due the BIOS update. Have you tried reinstalling Windows by using Toshiba recovery disk?
This BIOS downgrade can only be done from an authorized service provider. The technicians can install every version because they have such special tools to make a downgrade.
On the Toshiba website you can find a list of them. Just give the guys and ask for that. They will help you! :)

Satellite M40X: After Bios update keyboard keys don't work properly

I have a Satellite M40X and I had update the Bios to v. 1.60 and now the keys u, m, 7 and the arrow up are not working properly. The problem is that there is not other Bios version to use.
How can I resolve my problem?
Can I recover the old bios version?
Thanks
Gabriel

Hi there,
no you wont be able to recover the old BIOS. The only two options are:
1. Retry the BIOS update and check if its working
2. In case of no success, please visit the [ASP Locator|http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT] to search for the nearest ASP in your country and to ask them for a hardware checkup and repair.
Greets

After Microsoft updates, some website graphics not working

Last night before I switched off Microsoft sent through eleven(!) updates.
Every site I've visited this morning now has no banner heading, I can't use any of the underlining/bold or the smilies on anywhere, and on a couple of sites my Avatar has gone.
What can I do?
I've tried logging out and logging in again, but nothing seems to help?

Try clearing your browser cache.
Tools > Clear Recent History... - hit Details and make sure only Cache is selected, then select Everything and hit the Clear Now button.

Updating mobo drivers doesn't work properly!

Hi,
I downloaded the new 1.13's from Nvidia but after installing them and checking the Nvidia devices in Device Manager it says the driver version is still the original 1.0.0.0 from 07/09/2001. The audio drivers have updated properly and so has the network driver, but all the memory controllers etc in System Devices have not. These driver versions never change no matter what set I install - they always stay at 1.0.0.0.
Anyone know if I'm doing something wrong because this is getting frustrating.
Thanks!

The memory drivers never installed for me either.
I ended up uninstalling all the nvidia related drivers... display, audio, deleted all the nvidia references in device manager... restarted and re-installed the 1.13... no errors during the install this time.
As for version number, you'd probably have to find the actual memory controller file and look at it's properties for the real version number.

Why Hotmail Doesn't Work Properly Anymore???

Hotmail recently upgraded their look and as a result, it doesn't work properly via my iphone when I use Safari. It tells me to upgrade my web browser to Safari, IE or Firefox, however my iphone has the newest upgrade available...........so what is the fix?
In short, my hotmail doesn't work properly (Doesn't display emails in the preview pane) so I can't check emails essentially.

See the post abut this that you posted in a few minutes ago. Allan has answered the question.
http://discussions.apple.com/thread.jspa?threadID=1786751&tstart=0

Stream video doesn't work properly after update to OS Mavericks

after update to OS Mavericks stream video doesn,t work properly!!! doesn't loaded stream video and stream audio from web sites (youtube, or other with stream video).

1. System Preferences > Other/ Flash Player > Advanced > Delete All
     Press the "Delete All" button
     Install Adobe Flash Player.
    http://get.adobe.com/flashplayer/
    http://get.adobe.com/flashplayer/?PID=7105813
    Follow the prompts.
    Quit Safari.
    Restart computer. Relaunch Safari.
2. Enable Plug-ins
    Safari > Preferences > Security
    Internet Plug-ins > "Allow plug-ins"
    Enable it.
    Press " Manage Website Settings" button for more options.

HT6114 after the update some programms didnt work anymore....

i dont know if there is a connection, but after the update, some programms didnt work anymore.
for example: „Hands Off!“ & „Adobe Indesign CS6“
anybody else?

Hands off have an update available for 10.9.2, Hand Off 2.1.2 dated 25th Feb 2014.
Check Adobe site for updates.

Keyboard on Sat Pro 6100 doesn't work properly after remedial work

Hi,
My Sat Pro 6100 has just been away for the usual motherboard and power board replacement with Toshiba, but now I have a strange keyboard problem.
When I turn it on, all the keys work. After a few minutes, '3' doesn't work, then 'r' fails, then '5','7','8','9','0' stop working. At this stage I can feel something getting very hot under the middle of the keyboard. A reboot and no keys work. Another reboot with an external PS2 keyboard, and the internal keyboard is still faulty (some keys work, others don't) but the external one works correctly.
Now if the pc didn't get so hot under the middle of the internal keyboard, then I would conclude that the keyboard was faulty, but for it to fail slowly and sequentially like this, and it fails the same way every day (Since the Toshiba rebuild!).
Maybe, internal keyboard controller overheating?
Does anyone know what this might be? :-(
Cheers,
Homer

Right under the keyboard of your pro 6100 is the VGA graphics controller (the keyboard cable plugs into the same card). It is normal that this part becomes warm during usage.
It's strange that your problem appears after a while and not right away.
It might be just an improper reseating of the keyboard cable (it's a thin layer like a photo film-negative) that easily pops out, but... it can be something more serious, too. (Especially since you had the upgrade done where hardware had to be changed)
I would consult the service center once again and ask for instructions how to deal with this. Don't ignore it (by using an external keyboard instead of the malfunctioning internal) as it might end up into something more serious soon...
Regards
electrochain
P.S. Please keep us updated on your steps

My palm m105's touch screen doesn't work properly after a sync.

I dug out my old m105, put new batteries in and start it. On first launch it auto runs the alignment tool, and after touching all the points it goes to the main screen and works fine. No problem till here.
Now, I plug it into my old computer which still has the palm software with my apps, and I run the sync operation (from the palm device sync manager, cause I lost my cradle and I'm connected via the serial cable), and it syncs fine BUT, here comes the problem, when it finishes the sync (successfully) the touch screen is all misaligned. I can't go back to the home screen or do anything useful.
My palm m105's touch screen doesn't work properly after a sync.
I dug out my old m105, put new batteries in and start it. On first launch it auto runs the alignment tool, and after touching all the points it goes to the main screen and works fine. No problem till here.
Now, I plug it into my old computer which still has the palm software with my apps, and I run the sync operation (from the palm device sync manager, cause I lost my cradle and I'm connected via the serial cable), and it syncs fine BUT, here comes the problem, when it finishes the sync (successfully) the touch screen is all misaligned. I can't go back to the home screen or do anything useful.
Thanks in advance!
Post relates to: Palm m105
Post relates to: Palm m105

Maldoman578,
Let's help solve this mystery together! Is your screen freezing after every reboot? Is there any physical/liquid damage on the device? When did this issue begin? Did you notice this after a recent update or application download?
EfrainM_VZW
Follow us on Twitter @VZWSupport

After a tryout with AdBlock, the videos on Facebook, on BBC and on some others websites stopped working and there's always a message asking me to install the latest version of the Flash Player. Even though it's already installed. How can I fix that?

After a tryout with AdBlock, the videos on Facebook, on BBC and on some others websites stopped working and there's always a message asking me to install the latest version of the Adobe Flash Player. Even though it's already installed the situation remains the same since the last month.
Can I fix that just doing the upgrade for the Yosemite?

Well, after hours of trying to figure it out I gave up and un-installed and re-installed that last verion of Adobe Flash Player and now it seems I can play games again in Messenger. Everything else had been fine just that. I can only figure it was because it was having a hard time updating the first time and took me 3 tries. So even though it said it was installed, apparently it wasn't done correctly.
Though when I couldn't figure out what was wrong at first I looked and checked to see all the things were enabled that were supposed to be and they were.
I even tried to go to the Adobe site and download the last version I had and couldn't find it. Kept coming up with the new version. Others said if you download a particular older version it may not have all the security features in it.
This really gets to be a bit much, especially when you're by yourself and have only a smattering of knowledge of technical things.
Thanks fore responding to my question.
DFelice

HT4623 I AM FACING PROBLEM AFTER UPDATING (7.0.4) MY PHONE MODEL 5C,AFTER THIS UPDATE SOME TIMES I CANT MAKE CALLS & SOME TIMES WHEN ANY BODY ELSE WANTS TO CALL ME BACK THE MESSAGE COME THAT THE USER IS NOT REACHABLE.PLS HELP

I AM FACING PROBLEM AFTER UPDATING (7.0.4) MY PHONE MODEL 5C,AFTER THIS UPDATE SOME TIMES I CANT MAKE CALLS & SOME TIMES WHEN ANY BODY ELSE WANTS TO CALL ME BACK THE MESSAGE COME THAT THE USER IS NOT REACHABLE.PLS HELP

I am facing the same issue! I bought 5c few days back
and everything was fine till I updated the software 7.0.4!
Whenever am connected to wifi am unable to make a call and if someone tries
Calling me they get the message that my number is not
Reachable! When I go back to 3G the calls work perfectly!!
Please help me out since I use wifi more than my network.
Appreciate any advise on this

Adobe Reader updater doesn't work properly in Windows 7

For the longest time, I've been receiving update notifications from Adobe Reader, prompting me to upgrade. I always say ok, download the update. Then it always takes like 1 second to download (hard to believe it's that fast), then I get the install window. I press the "Install" button and the window disappears and I don't receive any additional messages... Until I reboot my computer and I get again the same update download prompt window.
So it seems the update doesn't work and that's why I get that message EVERYTIME I reboot the PC. Not matter if I reboot every 5 minutes, I always get that message.
Please, fix your updater so it doesn't annoy the user like this with non working updates!
Since the updater doesn't work, is there a way to disable it? Thank you!

Ok, I've added the registry setting you mentioned, then I've started "AdobeARMHelper.exe" again to get the tray notification about the available update. Then I've clicked it, I got the download window, I clicked "Download", then 1 second later I got another tray notification about the update being ready to install (maybe it takes so little time because the update is already in my computer and so it doesn't download anything). Then I clicked the tray notification and got the install window. I clicked Install, and nothing else happened, as always.
Then, I've checked the "AdobeARM.log" file, and now it shows the following:
[2013-07-09 01:09:37] Adobe ARM launcher started.
[2013-07-09 01:09:37] Command Line:
[2013-07-09 01:09:37] ARM path: C:\Program Files (x86)\Common Files\Adobe\ARM\1.0\AdobeARM.exe
[2013-07-09 01:09:37] Re-launch ARM succeeded
[2013-07-09 01:09:37] Adobe ARM launcher finished
[2013-07-09 01:09:37] Adobe ARM 1.7.2.0 logging started.
[2013-07-09 01:09:37] Command Line:
[2013-07-09 01:09:37] FindCurrentPDFOwner...
[2013-07-09 01:09:37] .pdf value: AcroExch.Document.11
[2013-07-09 01:09:37] GetFileVersion(): C:\Program Files (x86)\Adobe\Reader 11.0\Reader\AcroRd32.exe
[2013-07-09 01:09:37] File version: 11.0.2.0
[2013-07-09 01:09:37] ProductCode: {AC76BA86-7AD7-1034-7B44-AB0000000001}
[2013-07-09 01:09:37] ProductName: Adobe Reader XI (11.0.02) - Español
[2013-07-09 01:09:37] ProductVersion: 11.0.02
[2013-07-09 01:09:37] ProductUACPatching: enabled
[2013-07-09 01:09:37] Product UI Language: ESP
[2013-07-09 01:09:37] ProductLanguage installed: 1034
[2013-07-09 01:09:37] ProductRegistry: SOFTWARE\Adobe\Acrobat Reader\11.0
[2013-07-09 01:09:37] ProductInstallDir: C:\Program Files (x86)\Adobe\Reader 11.0\
[2013-07-09 01:09:37] InitUIStrings...
[2013-07-09 01:09:37] InitListener...
[2013-07-09 01:09:37] Init...
[2013-07-09 01:09:37] Notify...
[2013-07-09 01:09:37] Could not find ARM server to notify
[2013-07-09 01:09:37]    GetLastError(): 2 - El sistema no puede encontrar el archivo especificado.
[2013-07-09 01:09:37] StartServer...
[2013-07-09 01:09:37] IsVistaOrLater returns 1
[2013-07-09 01:09:37] ARM Server started
[2013-07-09 01:09:37] Action added: Listener
[2013-07-09 01:09:37] RunAutomatic...
[2013-07-09 01:09:37] Launched: C:\Program Files (x86)\Adobe\Reader 11.0\Reader\Reader_sl.exe
[2013-07-09 01:09:37] CanStart...
[2013-07-09 01:09:37] IsEULA_Accepted...
[2013-07-09 01:09:37] EULA accepted from 2
[2013-07-09 01:09:37] IsPatchingDisabled...
[2013-07-09 01:09:37] Admin User, IsElevated returns 1
[2013-07-09 01:09:37] GetPreferences...
[2013-07-09 01:09:37] Using found registered preference AUTO_CHECK_UPDATES
[2013-07-09 01:09:37] IsTimeElapsed...
[2013-07-09 01:09:37] Minutes elapsed: 82867
[2013-07-09 01:09:37] IsErrorExpired...
[2013-07-09 01:09:37] Last error is not registered
[2013-07-09 01:09:37] InitDownloadManager...
[2013-07-09 01:09:37] UAC is enabled
[2013-07-09 01:09:37] CanStart returns 1
[2013-07-09 01:09:37] Network is available, waited 0 ms
[2013-07-09 01:09:37] Action added: Download Manifest
[2013-07-09 01:09:37] Downloading Manifest:
[2013-07-09 01:09:37]    URL: https://armmf.adobe.com/arm-manifests/win/Reader11Manifest.msi
[2013-07-09 01:09:37]    file: C:\ProgramData\Adobe\ARM\Reader_11.0.02\Reader11Manifest.msi
[2013-07-09 01:09:37] DownloadFileAndWait()
[2013-07-09 01:09:37] Creating BITS job LocalFileName:C:\ProgramData\Adobe\ARM\Reader_11.0.02\Reader11Manifest.msi
[2013-07-09 01:09:37] Creating BITS job RemoteName:https://armmf.adobe.com/arm-manifests/win/Reader11Manifest.msi
[2013-07-09 01:09:37] downLoadFileSet(): File Count: 1
[2013-07-09 01:09:40] StoreCRD...
[2013-07-09 01:09:40] No CRD to store
[2013-07-09 01:09:40] Manifest downloaded successfully with BITs: C:\ProgramData\Adobe\ARM\Reader_11.0.02\Reader11Manifest.msi
[2013-07-09 01:09:40] Action deleted: Download Manifest
[2013-07-09 01:09:40] InitSession...
[2013-07-09 01:09:40] InitUpdateData...
[2013-07-09 01:09:40] InitUpgrade...
[2013-07-09 01:09:40] Upgrade data not available: Upgrade ID
[2013-07-09 01:09:40] File list in Manifest: AdbeRdrUpd11003.msp
[2013-07-09 01:09:40] InitUpdateFiles...
[2013-07-09 01:09:40] EvaluateCondition...: AdbeRdrUpd11003_all
[2013-07-09 01:09:40] InitUpdateAttributes...
[2013-07-09 01:09:40] New file object: AdbeRdrUpd11003.msp
[2013-07-09 01:09:40] AddFileObject...
[2013-07-09 01:09:40] InitFilesInUse...
[2013-07-09 01:09:40] info: WaitFilesInUse is not set in Manifest
[2013-07-09 01:09:40] InitManifestProperties...
[2013-07-09 01:09:40] ErrorDetailsURL property found in manifest
[2013-07-09 01:09:40] Found AllowServiceConditions: SvcCond1;SvcCond2
[2013-07-09 01:09:40] EvaluateCondition...: SvcCond1
[2013-07-09 01:09:40] ProcessFileCondition...
[2013-07-09 01:09:40] File: C:\Program Files (x86)\Common Files\Adobe\ARM\1.0\AdobeARM.exe
[2013-07-09 01:09:40] File version: 1.7.2.0
[2013-07-09 01:09:40] Condition met
[2013-07-09 01:09:40] EvaluateCondition...: SvcCond2
[2013-07-09 01:09:40] ProcessFileCondition...
[2013-07-09 01:09:40] File: C:\Program Files (x86)\Common Files\Adobe\ARM\1.0\AdobeARMHelper.exe
[2013-07-09 01:09:40] File version: 1.7.2.0
[2013-07-09 01:09:40] Condition met
[2013-07-09 01:09:40] AllowServiceMode property found in manifest: 2
[2013-07-09 01:09:40] Service not allowed - unknown AllowServiceMode value
[2013-07-09 01:09:40] WhatsNewURL property found in manifest
[2013-07-09 01:09:40] UpgradeName property found in manifest
[2013-07-09 01:09:40] info: AllowCancelBITsJobs is not set in Manifest
[2013-07-09 01:09:40] InitArmUpdate...
[2013-07-09 01:09:40] EvaluateCondition...: DisableArmUpdate
[2013-07-09 01:09:40] ArmUpdate record found.
[2013-07-09 01:09:40] IsNewArmAvailable...
[2013-07-09 01:09:40] GetFileVersion(): C:\Program Files (x86)\Common Files\Adobe\ARM\1.0\AdobeARM.exe
[2013-07-09 01:09:40] File version: 1.7.2.0
[2013-07-09 01:09:40] IsNewArmAvailable: NewBuildNumber > BuildNumber, returning 1.
[2013-07-09 01:09:40] AddArmUpdateObject:
[2013-07-09 01:09:40]    file - ARM.msi
[2013-07-09 01:09:40]    ARM version - 1.7.4.0
[2013-07-09 01:09:40]    type - 7z
[2013-07-09 01:09:40]    url - https://armmf.adobe.com/arm-updates/win/ARM/1.7.4/ARM_1740.msi
[2013-07-09 01:09:40] ShowArmDialog...
[2013-07-09 01:09:41] Action added: Dialog
[2013-07-09 01:10:05] SetupArmUpdate...
[2013-07-09 01:10:05] DownloadArmUpdate...
[2013-07-09 01:10:05] Extract7zArchive...
[2013-07-09 01:10:05]    File: C:\ProgramData\Adobe\ARM\Reader_11.0.02\ARM.msi
[2013-07-09 01:10:05]    archive file: C:\ProgramData\Adobe\ARM\Reader_11.0.02\AdobeARM.bin
[2013-07-09 01:10:05] ExtractFilesFrom7zArchive...
[2013-07-09 01:10:05] C:\ProgramData\Adobe\ARM\Reader_11.0.02\7626
[2013-07-09 01:10:05]    GetLastError(): 2 - El sistema no puede encontrar el archivo especificado.
[2013-07-09 01:10:05] Archive path: C:\ProgramData\Adobe\ARM\Reader_11.0.02\AdobeARM.bin
[2013-07-09 01:10:05] Files extracted successfully at: C:\ProgramData\Adobe\ARM\Reader_11.0.02\7626
[2013-07-09 01:10:05] SetupArmUpdate returns 1
[2013-07-09 01:10:05] DownloadFiles...
[2013-07-09 01:10:05] File already exist and valid: C:\ProgramData\Adobe\ARM\Reader_11.0.02\AdbeRdrUpd11003.msp
[2013-07-09 01:10:05] CancelJobs
[2013-07-09 01:10:05] GetJobs
[2013-07-09 01:10:05] no registered jobs
[2013-07-09 01:10:05] InitInstalls...
[2013-07-09 01:10:05] File to be added to install object: C:\ProgramData\Adobe\ARM\Reader_11.0.02\AdbeRdrUpd11003.msp
[2013-07-09 01:11:18] RelaunchARM...
[2013-07-09 01:11:18] Command line for restart: /ArmUpdateExe:"C:\ProgramData\Adobe\ARM\Reader_11.0.02\7626" /MODE:1 /PRODUCT:Reader /VERSION:11 /LANG:ESP
[2013-07-09 01:11:18] Launcher path: C:\ProgramData\Adobe\ARM\Reader_11.0.02\7626\AdobeARMHelper.exe
[2013-07-09 01:11:18] ShellExecute succeded.
[2013-07-09 01:11:18] Action deleted: Dialog
[2013-07-09 01:11:18] Notify...
[2013-07-09 01:11:18] WriteFile succeeded in Notify
[2013-07-09 01:11:18] Requested to stop listener
[2013-07-09 01:11:18] Confirming request to stop listener
[2013-07-09 01:11:18] Action deleted: Listener
[2013-07-09 01:11:18] Cleanup...
[2013-07-09 01:11:18] ARM returns ERROR_SUCCESS
[2013-07-09 01:11:18] Adobe ARM 1.7.2.0 logging finished.
It seems there are some errors in Spanish, probably because they come from Windows, which is configured in Spanish in my PC. "El sistema no puede encontrar el archivo especificado" means "The system cannot find the file specified".
I hope you can find the problem with that information.

After las update some menus doesn't work properly. Ther is non possibility to use mouse. Why?

Similar Messages

Maybe you are looking for