After last Syu Grub does not start correcly

After the last upgrade i remember seeing something about mkinitcpio and how i should read the arch wiki page for it, but i was in the middle of something and forgot about it, and later shutdown without having read about it. Now, when i start my computer and grub is loaded, 'GRUB' is written to the screen, and the computer just sits there like that instead of opening up the GRUB menu list. How can i fix this problem?

Also access your hard drive from a live CD or such and check '/var/log/pacman.log' to see what message you missed and what you should have done then consider doing it.

Similar Messages

  • Ligthroom 5.5 after installing the software does not start and does not give any kind of mistake

    I subscribe to CC as a photographer and just inatalar Ligthroom but this does not start and no daningun mistake. Reinstall several times but still the same. What can be the problem?
    thanks

    Hola, arreglado por mi parte también, chateando (en inglés...) con un operador que ha demostrado conocer perfectamente la solución (para Win7):
    En carpetas "C:\Program files (x86)\Common Files\Adobe\" y "C:\ProgramData\Adobe\" deben activarse permisos de control total para el usuario (que puede no tener control total en el sistema) y desactivar "solo lectura" a las carpetas descritas y sus subcarpetas para que al iniciar se configure el registro adecuadamente. Una vez hecho esto me ha funcionado todo a la primera, me lo han explicado paso a paso por el chat. Un 10 para el técnico, un suspenso para Adobe por no publicar adecuadamente la solución.
    Gracias manufoto por tu explicación, parece que todo va a parar a las mismas carpetas.
    Saludos

  • After Fresh Install CMS does not start

    Hello BO Gurus,
    I have got  a blank Installation of BO 4.0.
    At Install CMS does not start.
    I have got a:
    - BO 4.0
    -Windows 7 Server Enterprise, SP1
    Trace shows:
    ....Server MSMYSERVER3:6400 ... was not found or is possibny down....  (FWM 01003) Connection refused: connect
    ...Is the CMS alive? Ensure the CMS supports SDK version 1400
    How to start CMS ?
    Which Username to take to start CMS ?
    What is SDK version 1400 + ?
    Where to get SDK version 1400 + ?
    Thank You !
    Best Wishes
    Martin

    Could also be a database connection issue.
    What database are you running?
    We've had an issue where the database (MSSQL) was hosted on a seperate server and where Windows Authentication was used. To resolve the issue, we had to change the Server Intelligence Agent (SIA) service to start with the Windows/domain account.
    Regards,
    CJ

  • After last update, Thunderbird does not appear on desktop when started (XP Professional).

    Since yesterday's update, when I start Thunderbird, it appears in the task bar, but not on the desktop. I can select it, or use Task Manager to "switch to" it, but right-clicking it does not give me a menu. (It used to be that it opened outside the visible desktop, but right-click gave me a "move" option and I could move it to the visible screen with the cursor keys). I know XP is on its way out, but...

    Start >Programs >Mozilla Thunderbird
    right click and select 'Create shortcut'
    It should ask to put shortcut on desktop, click on Yes

  • After updating bios laptop does not starts. it starts for 5 sec and goes off repeatedly

    today morning i upodated bios from hp website, mp laptop model is hp pavilion dv4 5009tx, bt after updating it is not starting. it starts for 5 seconds and goes off, and this go on happening...
    please suggest me what shall i do now. 
    MY LAPTOP IS IN WARRANTY PERIOD. i bought it this month 
    This question was solved.
    View Solution.

    You're very welcome.Happy to hear you are back up and running.
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • After install of the last version, iTunes does not start anymore ...

    Symptom : described in the title.
    Everything has been working for years, and after upgrade, just nothing happens.
    I can see the iTunes + iTunes helper + iPod services processes in Task Manager, but no window appears.
    Even after killing all that & start again, nothing happens.
    I just bought a second iPod and I need iTunes to get working!
    Prompt help would be appreciated.
    br

    I just realised you are using XP here is a fuller method for Troubleshooting silent launch failure in Windows XP
    Before checking if iTunes works, restart your PC or close the iTunes.exe process with task manager if it is running.
    A couple of simple things to try:
    XP
    http://support.apple.com/kb/TS1776?viewlocale=en_US
    Vista
    http://support.apple.com/kb/TS2363?viewlocale=en_US
    Stop the bonjour service, this FAQ has instructions:
    http://support.apple.com/kb/HT2250?viewlocale=en_US
    But usually it is due to a problem with cryptographic services.
    Check to see if you have your smart card service and that it is not set to disabled. For some reason iTunes needs it.
    Start>>Run>>Services.msc
    you should find the smart card service in the list. Report back with your findings.
    Malware can interfere with cryptographic services and also prevent a resolution so it is important to check that your system is clean before proceeding: Run a virus and spyware scan with up to date definitions.
    Then work through *Method 4* in the following link:
    http://support.microsoft.com/kb/822798
    You should be able to copy and paste the individual lines to save on typing.
    Make a careful note of any error messages you get, they are important for diagnosis. Report back any error messages especially the names of any dlls mentioned.
    If there are no errors try starting iTunes.

  • After using hibernation, it does not start up and has black screen

    My computer was fine for 2 yrs or so,now it will not startup!  After it was in hibernation, I came back a few hrs later and turned on the power and it has a black screen.  The only things that are lit are the left side blue dot and the f12 button.
    This computer worked perfectly until today, except it tok longer sometimes to come out of hibernation.
    I tries a hard reset according to what the HP website said, nothing worked!!
    Can anyone help ant tell me how to get this thing to work??
    Thanks,
    John

    Hey wealthylives,
    Welcome to the HP Forums!
    As the computer screen is remaining black/blank after the hard reset, I would suggest the following document 'Troubleshooting Black Screen Displays with No Error Messages During Startup or Boot'. Please follow through the steps outlined in order.
    Please let me know the outcome of the troubleshooting.
    Thank you.
    I worked on behalf of HP

  • Even after software restore, ibook does not start up - shows ?

    My ibook was having problems starting up, most times a "?" blinking while trying to start up. So I started up using the starup disc while holding down the "C" key. I reinstalled the system software choosing to erase the HD and start from scratch.
    When i go to start up the ibook with the freshly installed system, i am still getting the blinking "?". does this mean i have a hardware problem?

    See A flashing question mark appears when you start your Mac.

  • Aperture does not start after iphoto update

    Hello,
    It seems that recent update to iphoto made Paerture not to start.
    At first attempt, Aperture opened the window, but never went into normal and beach ball was over the blank window, no functions worked.
    After Force quit, it does not start at all:
    From dock it just silently does not start and from Launch pad the error:
    "The application "Aperture" can't be opened
    -1712"
    is displayed.
    What could this be and how to make Aperture working again.
    This is Mavericks, 2012 MacBook Pro, Hires.
    Thanks a lot

    Computer reboot solved the issue.
    Aperture now sarts normally.

  • MacBook pro does not start. How can I back to Mac OS X Lion?

    I have a MacBook Pro. On my MacBook i made three partition, then I installed window 8. After that I started windos and try to delete third partition by Administrator tool from windows operating system. After that my MacBook does not start. How can I back to Mac OS X Lion?
    After that I again install windows 8 from a DVD. Windows start well, but I can not start Mac OS system, may be it was 10.6.  Sever times I tried to install OS X Lion 10.7 thought DVD, I could not. On MacBook I have a lot of important data.
    What can I do. I want to a complete suggestion. Please help me to solve the problem.
    My MacBook Pro model no. A1286.

    You installed Windows improperly the result of which was to wipe out the bootloader for OS X. You can give this a try:
    Boot Using OPTION key:
      1. Restart the computer.
      2. Immediately after the chime press and hold down the
          "OPTION" key.
      3. Release the key when the boot manager appears.
      4. Select the OS X disk icon from which you want to boot.
      5. Click on the arrow button below the icon.
    If you are still unable to boot from the OS X volume then you will need to reinstall OS X:
    Reinstall OS X without erasing the drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.
    This will destroy the Windows bootloader so you cannot boot into Windows. The solution is to remove all the partitions on the drive except the OS X partition, then expand the OS X partition to take up the entire drive.
    Use Boot Camp Assistant in the Utilities folder to create a Windows partition on which you can install Windows. You cannot have any other partitions on the drive besides these two.
    Now given all the above you may be able to install a third-party bootloader that would work with the setup you now have: Boot Runner 1.4.

  • Cssd does not start in non-RAC environment Thus we can not bring up ASM

    Non-RAC environment
    ASM version = 11.1.0.7
    HP-UX Itanium 11.23
    After power outage, CSSD does not start on non-RAC environment
    Running as root "/sbin/init.d/init.cssd start" does not start cssd
    Oracle support tried "$ASM_HOME/bin/localconfig delete" and "$ASM_HOME/bin/localconfig add"
    but it did not start CSS
    Oracle support tried "$ASM_HOME/bin/localconfig reset $ASM_HOME"
    It started the CSSD and the "crsctl check css" came back with CSS is healthy
    But around 1 minute later it rebooted the server and when it came up again CSS does not start.
    They checked /etc/inittab and it looked fine.
    Before the reboot we saw this message in the /var/adm/syslog/OLDsyslog.log:
    Cluster Ready Services completed waiting on dependencies
    Again it is a NON-RAC environment. We only need CSSD for ASM. We do not have CRS installed on this server.
    Our test system has been down for a week and we did not get the resolution from Oracle support yet !
    Any pointers are greately appriciated.
    Thanks,
    Dzung

    Here is the message in $ASM_HOME/log/<hostname>/alert<hostname>.log :
    2010-07-16 09:42:02.956
    [client(11930)]CRS-1006:The OCR location /db/app/oracle/product/11.1/cdata/localhost/local.ocr is inacce
    ssible. Details in /db/app/oracle/product/11.1/log/rmodbd01/client/clscfg10.log.
    2010-07-16 09:42:02.971
    [client(11930)]CRS-1006:The OCR location /db/app/oracle/product/11.1/cdata/localhost/local.ocr is inacce
    ssible. Details in /db/app/oracle/product/11.1/log/rmodbd01/client/clscfg10.log.
    2010-07-16 09:42:03.054
    [client(11930)]CRS-1013:The OCR at /db/app/oracle/product/11.1/cdata/localhost/local.ocr was successfull
    y formatted using version 2. Ignore earlier CRS-1006 messages if any.
    2010-07-16 09:42:46.379
    [cssd(12297)]CRS-1601:CSSD Reconfiguration complete. Active nodes are rmodbd01 .
    Here is the message in $ASM_HOME/log/<hostname>/cssd/cssdOUT.log:
    setsid: failed with -1/1
    s0clssscGetEnvOracleUser: calling getpwnam_r for user oracle
    s0clssscGetEnvOracleUser: info for user oracle complete
    07/16/10 09:42:36: CSSD starting
    Here is the message in $ASM_HOME/log/<hostname>/cssd/ocssd.log:
    [    CSSD]2010-07-16 09:42:46.378 [18] >TRACE: clssgmCompareSwapEventValue: changed CmInfo State val 7, from 6, changes 6
    [    CSSD]2010-07-16 09:42:46.378 [18] >TRACE: clssgmSetVersions: properties common to all peers: 1,2,3,4,5,6,7
    [    CSSD]2010-07-16 09:42:46.378 [18] >TRACE: clssgmEstablishMasterNode: MASTER for 174732166 is node(0) birth(174732166)
    [    CSSD]2010-07-16 09:42:46.378 [18] >TRACE: clssgmChangeMasterNode: requeued 0 RPCs
    [    CSSD]2010-07-16 09:42:46.378 [18] >TRACE: clssgmCompareSwapEventValue: changed CmInfo State val 8, from 7, changes 7
    [    CSSD]2010-07-16 09:42:46.378 [18] >TRACE: clssgmMasterCMSync: Synchronizing group/lock status
    [    CSSD]2010-07-16 09:42:46.378 [18] >TRACE: clssgmMasterSendDBDone: group/lock status synchronization complete
    [    CSSD]2010-07-16 09:42:46.378 [18] >TRACE: clssgmCompareSwapEventValue: changed CmInfo State val 9, from 8, changes 8
    [    CSSD]2010-07-16 09:42:46.378 [18] >TRACE: clssgmCompareSwapEventValue: changed CmInfo State val 10, from 9, changes 9
    [    CSSD]CLSS-3000: reconfiguration successful, incarnation 174732166 with 1 nodes
    [    CSSD]CLSS-3001: local node number 0, master node number 0
    [    CSSD]2010-07-16 09:42:46.378 [18] >TRACE: clssscSAGEInitFenceCompl: Completing kgzf fence initialization
    [    CSSD]2010-07-16 09:42:46.394 [12] >TRACE: clssgmUpdateEventValue: Client listener incarn val 174732166, changes 1
    [    CSSD]2010-07-16 09:42:46.395 [12] >TRACE: clssgmAllocProc: (60000000003c7120) allocated
    [    CSSD]2010-07-16 09:42:46.395 [12] >TRACE: clssgmAllocProc: (60000000003c73a0) allocated
    [    CSSD]2010-07-16 09:42:46.396 [14] >TRACE: Connect request from user oracle
    [    CSSD]2010-07-16 09:42:46.396 [14] >TRACE: Connect request from user root
    [    CSSD]2010-07-16 09:42:46.397 [12] >TRACE: clssgmClientConnectMsg: properties of cmProc 60000000003c7120 - 1,2,3
    [    CSSD]2010-07-16 09:42:46.397 [12] >TRACE: clssgmClientConnectMsg: Connect from con(60000000003b2810) proc(60000000003c7120) pid(12350) version 11:1:1:4
    [    CSSD]2010-07-16 09:42:46.397 [12] >TRACE: clssgmClientConnectMsg: properties of cmProc 60000000003c73a0 - 1,2,3
    [    CSSD]2010-07-16 09:42:46.397 [12] >TRACE: clssgmClientConnectMsg: Connect from con(60000000003b2990) proc(60000000003c73a0) pid(12131) version 11:1:1:4
    [    CSSD]2010-07-16 09:42:46.402 [12] >TRACE: clssgmRegisterClient: proc(1/60000000003c7120), client(1/600000000096e7c0)
    [    CSSD]2010-07-16 09:42:46.402 [12] >TRACE: clssgmExecuteClientRequest: GRKJOIN recvd from client 1 (600000000096e7c0)
    [    CSSD]2010-07-16 09:42:46.402 [12] >TRACE: clssgmJoinGrock: local grock CSS_INTERNAL_NODE_GROUP new client 600000000096e7c0 with con 60000000003b2b10, requested num 0
    [    CSSD]2010-07-16 09:42:46.402 [12] >TRACE: clssgmAddNodeGrpMember: member (60000000009e0030) added
    [    CSSD]2010-07-16 09:42:46.403 [12] >TRACE: clssgmGroupState: requested group state of group localhost_NG, member count 0
    [    CSSD]2010-07-16 09:42:46.403 [12] >TRACE: clssgmGroupState: requested group state of group localhost_NG, member count 0
    [    CSSD]2010-07-16 09:42:46.404 [12] >TRACE: clssgmDeadProc: proc 60000000003c73a0
    [    CSSD]2010-07-16 09:42:46.404 [12] >TRACE: clssgmDestroyProc: cleaning up proc(60000000003c73a0) con(60000000003b2990) skgpid ospid 12131 with 0 clients, refcount 0
    [    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmGroupState: requested group state of unknown group MASTER#DISKMON#GROUP
    [    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmGroupState: requested group state of group MASTER#DISKMON#GROUP, member count 0
    [    CSSD]2010-07-16 09:42:46.425 [18] >TRACE: KGZF: context successfully initialized, API version 1.4, using pipe default
    [    CSSD]2010-07-16 09:42:46.425 [18] >TRACE: clssscSAGEInitFenceCompl: kgzf fence initialization successfully completed
    [    CSSD]2010-07-16 09:42:46.425 [18] >TRACE: clssgmReconfigThread: CSS/GM open for global group registrations
    [    CSSD]2010-07-16 09:42:46.425 [18] >TRACE: clssgmReconfigThread: completed for reconfig(174732166), with status(1)
    [    CSSD]2010-07-16 09:42:46.425 [18] >TRACE: clssgmUpdateEventValue: Reconfig Event val 2, changes 2
    [    CSSD]2010-07-16 09:42:46.425 [1] >TRACE: clssgmWaitOnEventValue: after Reconfig Event val 2, eval 2 waited 47
    [    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmRegisterClient: proc(1/60000000003c7120), client(2/600000000096e870)
    [    CSSD]2010-07-16 09:42:46.425 [1] >TRACE: clssgmUpdateEventValue: Reconfig Event val 0, changes 3
    [    CSSD]2010-07-16 09:42:46.425 [1] >TRACE: clssgmStartNMMon: previous reconfig complete, incarnation(174732166)
    [    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmExecuteClientRequest: GRKJOIN recvd from client 2 (600000000096e870)
    [    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmJoinGrock: global grock MASTER#DISKMON#GROUP#MX new client 600000000096e870 with con 60000000003b2990, requested num -1
    [    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmAddGrockMember: adding member to grock MASTER#DISKMON#GROUP#MX
    [    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmAddMember: granted member(0) flags(0x2) node(0) grock (6000000000989e50/MASTER#DISKMON#GROUP#MX)
    [    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmQueueGrockEvent: lockName(MASTER#DISKMON#GROUP#MX) type(3) count (1/1) xwaiters(1) event(1) to memberNo(0)
    [    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmCommonAddMember: global lock grock MASTER#DISKMON#GROUP#MX member(0/Local) node(0) flags 0x2 0x2
    [    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmRegisterClient: proc(1/60000000003c7120), client(3/600000000096e920)
    [    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmExecuteClientRequest: GRKJOIN recvd from client 3 (600000000096e920)
    [    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmJoinGrock: global grock MASTER#DISKMON#GROUP new client 600000000096e920 with con 60000000003b2bd0, requested num 0
    [    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmAddGrockMember: adding member to grock MASTER#DISKMON#GROUP
    [    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmAddMember: new master 0 for group(MASTER#DISKMON#GROUP)
    [    CSSD]2010-07-16 09:42:46.426 [12] >TRACE: clssgmAddMember: Adding fencing for member 0, group MASTER#DISKMON#GROUP, death 1, SAGE 0
    [    CSSD]2010-07-16 09:42:46.426 [12] >TRACE: clssgmAddMember: member (0/60000000009e0230) added. pbsz(72) prsz(0) flags 0x0 to grock (600000000098a170/MASTER#DISKMON#GROUP)
    [    CSSD]2010-07-16 09:42:46.426 [12] >TRACE: clssgmQueueGrockEvent: groupName(MASTER#DISKMON#GROUP) count(1) master(0) event(1), incarn 1, mbrc 1, to member 0, events 0x78, state 0x0
    [    CSSD]2010-07-16 09:42:46.426 [12] >TRACE: clssgmCommonAddMember: global group grock MASTER#DISKMON#GROUP member(0/Local) node(0) flags 0x0 0x1e00
    [    CSSD]2010-07-16 09:42:46.426 [12] >TRACE: clssgmExecuteClientRequest: GRKEXIT recvd from client 2 (600000000096e870)
    [    CSSD]2010-07-16 09:42:46.426 [12] >TRACE: clssgmExitGrock: client 2 (600000000096e870), grock MASTER#DISKMON#GROUP#MX, member 0
    [    CSSD]2010-07-16 09:42:46.426 [12] >TRACE: clssgmUnregisterPrimary: Unregistering member 0 (60000000009e0130) in global grock MASTER#DISKMON#GROUP#MX
    [    CSSD]2010-07-16 09:42:46.426 [12] >TRACE: clssgmRemoveMember: grock MASTER#DISKMON#GROUP#MX, member number 0 (60000000009e0130) node number 0 state 0x14 member refcnt 0 grock type 3
    [    CSSD]2010-07-16 09:42:48.405 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:42:48.405 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:42:52.444 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:42:52.444 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:42:56.484 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:42:56.484 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:43:00.516 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:43:00.516 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:43:04.563 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:43:04.563 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:43:08.603 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:43:08.603 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:43:12.643 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:43:12.643 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:43:16.676 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:43:16.676 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:43:20.723 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:43:20.723 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:43:24.762 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:43:24.762 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:43:28.802 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:43:28.802 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:43:32.842 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:43:32.842 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:43:36.882 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:43:36.882 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:43:40.922 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:43:40.922 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:43:44.964 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:43:44.964 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:43:49.002 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:43:49.002 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:43:53.043 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:43:53.043 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:43:57.085 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:43:57.085 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:43:58.354 [12] >TRACE: clssgmAllocProc: (60000000003c7ee0) allocated
    [    CSSD]2010-07-16 09:43:58.355 [14] >TRACE: Connect request from user oracle
    [    CSSD]2010-07-16 09:43:58.356 [12] >TRACE: clssgmClientConnectMsg: properties of cmProc 60000000003c7ee0 - 1,2,3
    [    CSSD]2010-07-16 09:43:58.356 [12] >TRACE: clssgmClientConnectMsg: Connect from con(60000000003b2990) proc(60000000003c7ee0) pid(13157) version 11:1:1:4
    [    CSSD]2010-07-16 09:43:58.360 [12] >TRACE: clssgmRegisterClient: proc(2/60000000003c7ee0), client(1/600000000096e870)
    [    CSSD]2010-07-16 09:43:58.360 [12] >TRACE: clssgmExecuteClientRequest: GRKJOIN recvd from client 1 (600000000096e870)
    [    CSSD]2010-07-16 09:43:58.360 [12] >TRACE: clssgmJoinGrock: global grock CLSSSCHECK_GROUP new client 600000000096e870 with con 60000000003b2c90, requested num -1
    [    CSSD]2010-07-16 09:43:58.360 [12] >TRACE: clssgmAddGrockMember: adding member to grock CLSSSCHECK_GROUP
    [    CSSD]2010-07-16 09:43:58.360 [12] >TRACE: clssgmAddMember: new master 0 for group(CLSSSCHECK_GROUP)
    [    CSSD]2010-07-16 09:43:58.360 [12] >TRACE: clssgmAddMember: Adding fencing for member 0, group CLSSSCHECK_GROUP, death 1, SAGE 0
    [    CSSD]2010-07-16 09:43:58.360 [12] >TRACE: clssgmAddMember: member (0/60000000009e0130) added. pbsz(8) prsz(8) flags 0x0 to grock (6000000000989e50/CLSSSCHECK_GROUP)
    [    CSSD]2010-07-16 09:43:58.360 [12] >TRACE: clssgmQueueGrockEvent: groupName(CLSSSCHECK_GROUP) count(1) master(0) event(1), incarn 1, mbrc 1, to member 0, events 0x0, state 0x0
    [    CSSD]2010-07-16 09:43:58.360 [12] >TRACE: clssgmCommonAddMember: global group grock CLSSSCHECK_GROUP member(0/Local) node(0) flags 0x0 0x0
    [    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmExecuteClientRequest: GRKEXIT recvd from client 1 (600000000096e870)
    [    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmExitGrock: client 1 (600000000096e870), grock CLSSSCHECK_GROUP, member 0
    [    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmUnregisterPrimary: Unregistering member 0 (60000000009e0130) in global grock CLSSSCHECK_GROUP
    [    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmRemoveMember: grock CLSSSCHECK_GROUP, member number 0 (60000000009e0130) node number 0 state 0x14 member refcnt 0 grock type 2
    [    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmRegisterClient: proc(2/60000000003c7ee0), client(2/600000000096e870)
    [    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmExecuteClientRequest: GRKJOIN recvd from client 2 (600000000096e870)
    [    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmJoinGrock: global grock CLSSSCHECK_LOCK new client 600000000096e870 with con 60000000003b2c90, requested num -1
    [    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmAddGrockMember: adding member to grock CLSSSCHECK_LOCK
    [    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmAddMember: granted member(0) flags(0x2) node(0) grock (6000000000989e50/CLSSSCHECK_LOCK)
    [    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmQueueGrockEvent: lockName(CLSSSCHECK_LOCK) type(3) count (1/1) xwaiters(1) event(1) to memberNo(0)
    [    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmCommonAddMember: global lock grock CLSSSCHECK_LOCK member(0/Local) node(0) flags 0x2 0x2
    [    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmExecuteClientRequest: GRKEXIT recvd from client 2 (600000000096e870)
    [    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmExitGrock: client 2 (600000000096e870), grock CLSSSCHECK_LOCK, member 0
    [    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmUnregisterPrimary: Unregistering member 0 (60000000009e0130) in global grock CLSSSCHECK_LOCK
    [    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmRemoveMember: grock CLSSSCHECK_LOCK, member number 0 (60000000009e0130) node number 0 state 0x14 member refcnt 0 grock type 3
    [    CSSD]2010-07-16 09:43:58.362 [12] >TRACE: clssgmDeadProc: proc 60000000003c7ee0
    [    CSSD]2010-07-16 09:43:58.362 [12] >TRACE: clssgmDestroyProc: cleaning up proc(60000000003c7ee0) con(60000000003b2990) skgpid ospid 13157 with 0 clients, refcount 0
    [    CSSD]2010-07-16 09:44:01.125 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:44:01.125 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:44:05.164 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:44:05.164 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:44:09.196 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:44:09.196 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:44:13.236 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:44:13.236 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:44:17.284 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:44:17.284 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:44:21.322 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:44:21.322 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:44:25.316 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:44:25.316 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:44:30.333 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:44:30.333 [8] >TRACE: clssnmSendingThread: sent 5 status msgs to all nodes
    [    CSSD]2010-07-16 09:44:34.324 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:44:34.324 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    Here is the message in $ASM_HOME/log/<hostname>/diskmon/client.log:
    [ DISKMON] 07/16/2010 18:33:32.050 dskm_send_command: process 23246 sending command 8 to master diskmon listening on default pipe
    [ DISKMON] 07/16/2010 18:33:32.080 dskm_send_command3: skgznp_connect failed with error 56815
    [ DISKMON] 07/16/2010 18:33:32.080 dskm_send_command3: error 56815 at location skgznpcon6 - connect() - Connection refused
    Here is the message in $ASM_HOME/log/<hostname>/diskmon/diskmonOUT.log:
    setsid: failed with -1/1
    dskm_getenv_oracle_user: calling getpwnam_r for user oracle
    dskm_getenv_oracle_user: info for user oracle complete
    07/16/10 18:33:31: Master Diskmon starting
    Here is the message in $ASM_HOME/log/<hostname>/diskmon/diskmon.log:
    [ DISKMON] 07/16/2010 09:42:35.573 dskm main: starting up
    [ DISKMON] 07/16/2010 09:42:35.588 [12350:3] dskm_rac_thrd_main: running
    [ DISKMON] 07/16/2010 09:42:35.588 [12350:1] dskm_rac_thrd_creat2: got the post from the css event handling thread
    [ DISKMON] 07/16/2010 09:42:35.589 [12350:1] dskm main: startup complete
    [ DISKMON] 07/16/2010 09:42:35.589 [12350:1] listening on -> default pipe
    [ DISKMON] 07/16/2010 09:42:35.792 clsc_connect: (6000000000700420) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rmodbd01_))
    [ DISKMON] 07/16/2010 09:42:36.385 clsc_connect: (6000000000700420) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rmodbd01_))
    [ DISKMON] 07/16/2010 09:42:36.906 clsc_connect: (6000000000700420) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rmodbd01_))
    [ DISKMON] 07/16/2010 09:42:37.426 clsc_connect: (6000000000700420) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rmodbd01_))
    [ DISKMON] 07/16/2010 09:42:37.945 clsc_connect: (6000000000700420) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rmodbd01_))
    [ DISKMON] 07/16/2010 09:42:38.465 clsc_connect: (6000000000700420) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rmodbd01_))
    [ DISKMON] 07/16/2010 09:42:46.376 [12350:1] dskm_slave_thrd_creat: thread created
    [ DISKMON] 07/16/2010 09:42:46.376 [12350:11] dskm_slave_thrd_main1: slave 0 running
    [ DISKMON] 07/16/2010 09:42:46.376 [12350:11] dskm_process_msg5: received msg type KGZM_IDENTIFY (0x0001)
    [ DISKMON] 07/16/2010 09:42:46.389 [12350:11] dskm_proc_identify8: client kgzf/12297, version 0x01020000, slave 0, reid cid=3e0391f05e06cfafbf7419d7cf085a44,icin=174732166,nmn=0,lnid=174732166,gid=0,gin=0,gmn=0,umemid=0,opid=0,opsn=0,lvl=node
    [ DISKMON] 07/16/2010 09:42:46.389 [12350:11] dskm_send_version1:
    [ DISKMON] 07/16/2010 09:42:46.389 [12350:11] dskm_send_version4: done
    [ DISKMON] 07/16/2010 09:42:46.389 [12350:11] dskm_process_msg7: processed msg 0 type KGZM_IDENTIFY (0x0001), retcode 0
    [ DISKMON] 07/16/2010 09:42:46.389 [12350:11] dskm_process_msg5: received msg type KGZM_KGZF_HANDSHAKE (0x0010)
    [ DISKMON] 07/16/2010 09:42:46.389 [12350:11] dskm_proc_kgzf_handshake3: client kgzf/12297, kgzf version 0x00010004, slave 0
    [ DISKMON] 07/16/2010 09:42:46.401 [12350:3] dskm_clss_ini2: successful clsssinit(), clssvers 2.1
    [ DISKMON] 07/16/2010 09:42:46.402 [12350:3] dskm_clss_ini12: node rmodbd01 (0) registered in cluster
    [ DISKMON] 07/16/2010 09:42:46.403 [12350:3] dskm_reid_ini12: diskmon reid cid=3e0391f05e06cfafbf7419d7cf085a44,icin=174732166,nmn=0,lnid=174732166,gid=-1,gin=-1,gmn=-1,umemid=-1,opid=12350,opsn=1279291355,lvl=process
    [ DISKMON] 07/16/2010 09:42:46.424 [12350:3] dskm_sage_config: CELL storage configuration file cellinit.ora not found
    [ DISKMON] 07/16/2010 09:42:46.425 [12350:3] dskm_nfy_kgzf1: notified thread kgzf enabled
    [ DISKMON] 07/16/2010 09:42:46.425 [12350:11] dskm_proc_kgzf_handshake5: got the post from the hb thread
    [ DISKMON] 07/16/2010 09:42:46.425 [12350:11] dskm_proc_kgzf_handshake9: done, kgzf enabled
    [ DISKMON] 07/16/2010 09:42:46.425 [12350:11] dskm_process_msg7: processed msg 0 type KGZM_KGZF_HANDSHAKE (0x0010), retcode 0
    [ DISKMON] 07/16/2010 09:42:46.426 [12350:3] dskm_rac_ini22: CELL storage not configured in the cluster; registered in group MASTER#DISKMON#GROUP as memno 0 (GSDGRPSZ 512)

  • Does not start up with last viewed Tabs even though chosen in options?

    V 4.01 with Vista. Even after choosing the correct option in options>options>General FF does not start up with the last session of Tabs and Windows. It always opens with a single blank Tab. What am I doing wrong?

    Make sure that you do not use [[Clear Recent History]] to clear the "Browsing History" if Firefox is closed because that prevails and prevents Firefox from opening tabs from the previous session.
    If you use CCleaner then make sure that Session is unchecked in the settings for the Firefox application.

  • Photoshop Elements 7 does not start (after 3 years i used it)

    Yesterday, when i opened my Photoshop Elements 7 (I use it on my PC from 3 years), after the splash screen, an alert windows says to me that there is an error and suggested to restart PC or reinstall product. The program automatically closed itself.
    I'm not able to write the exact sentence of the alert, because now PE7 does not start at all. Not even the alert with the error message.
    I always used this product in this 3 years (from this PC), without problems.
    PE7 was preinstalled and pre-registered by the constructor of PC (Sony-Vaio). So, now i have not even the registration key to reinstall PE7.
    Furthermore, I tried to open Adobe Premiere Elements 7 (also, preinstalled and pre-registered, but never used), and after splash screen the program automatically close itself.
    What can I do??!?
    Thanks you all.

    No result by disconnecting from the network. Even if I restart PC.
    But.... I SOLVED the problem!!!!!
    The problem was "FLEXnet Licensing Service"
    Thanks to last tip, that leads to another failure... I remembered that 2 days ago I tried to optimize my PC by stopping some service with MSConfig. One of the disabled services was "FLEXnet Licensing Service".
    Searching in google, now i know that "Flexnet Licensing service is used by most Adobe products to prevent piracy".
    So, some Adobe products do not start, if Flexnet Licensing service is not running.
    Thank you very much for tips, and help in general... very helpful (to investigate the nature of the problem).

  • Em does not start after servername has changed

    Is there a possibility to get the datanbase running in an ordinary way after the servername has changed after the installation of the database?
    System:
    Windows Server 2003R2
    Oracle 10g R2
    I have changed tnsnames.ora and listener.ora, so the client connection runs well.
    But enterprise manager does not start:
    If I want to start "Database control" there is the old servername in the http-Link:
    http://oldservername:1158/em
    If I replace the old name with "localhost" or the new name I get also an errormessage that the site cant be found.
    In services the OracleDBConsole cant be started.
    with ">emctl start dbconsole" I get the error message ORACLE_SID is not defined.
    Defining it does not change the behaviour.
    Do I have to reinstall the database?
    Thanks
    Roswitha

    Subject: How To Drop, Create And Recreate DB Control In A 10g Database
    Doc ID: Note:278100.1 Type: BULLETIN
    Last Revision Date: 05-JUN-2007 Status: PUBLISHED
    In this Document
    Purpose
    Scope and Application
    How To Drop, Create And Recreate DB Control In A 10g Database
    DB Control options:
    A. Delete DB Control Objects:
    B. Create DB Control Objects
    C. Recreate/ReConfig DB Control
    Applies to:
    Enterprise Manager Grid Control - Version: 10.1 to 10.2
    Information in this document applies to any platform.
    DBConsole
    Purpose
    This article provides detailed instructions on how to 1) create, 2) drop and 3)recreate the repository and configuration files for the DB Control application used to manage a single 10g Database.
    Scope and Application
    The steps in this article are written for a DBA or System Administrator who needs to create, drop or reconfigure the DB Control Application.
    The format of the document will include steps for both 10.1 and 10.2 EMCA because the commands changed between the two releases.
    How To Drop, Create And Recreate DB Control In A 10g Database
    DB Control options:
    A. Delete DB Control Objects:
    Option 1. Delete DB Control Configuration Files using EMCA scripts
    Option 2. Delete DB Control Configuration Files Manually:
    Option 3. Delete DB Control Repository Objects using RepManager
    Option 4. Delete DB Control Repository Objects Manually
    Option 5. Delete DB Control Configuration Files and Repository Objects using EMCA
    Option 1. Delete DB Control Configuration Files using EMCA scripts:
    For DB Control 10.1.x, run the command: <ORACLE_HOME>/bin/emca -x <sid>For DB Control 10.2.x, run the command: <ORACLE_HOME>bin/emca -deconfig dbcontrol db
    Option 2. Delete DB Control Configuration Files Manually:
    Remove the following directories from your filesystem:
    <ORACLE_HOME>/<hostname_sid>
    <ORACLE_HOME>/oc4j/j2ee/OC4J_DBConsole_<hostname>_<sid>
    NOTE:
    On Windows you also need to delete the DB Console service:
    - run regedit
    - navigate to HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/Services
    - locate the OracleDBConsole<sid> entry and delete it
    Alternatively on Windows XP and Windows Server 2003 you can run the following from the command line:
    'sc delete <service_name>'
    - where <service_name> is the DB Control service name (typically: OracleDBConsole<sid>)
    Also available from Microsoft is the delsrv.exe command. (Free download from Microsoft)
    Option 3. Delete DB Control Repository using RepManager:
    This option is not as complete as the other options. You may find that dropping the repository using the commandline options is a better solution. Also note, RepManager is not used to create a DB Control Repository.
    In both 10g R1 and R2 run: <ORACLE_HOME>/sysman/admin/emdrep/bin/RepManager <hostname> <listener_port> <sid> -action drop
    Option 4. Delete DB Control Repository Objects Manually
    Logon SQLPLUS as user SYS or SYSTEM, and drop the sysman account and management objects:SQL> SHUTDOWN
    IMMEDIATE;SQL> STARTUP RESTRICT;SQL> EXEC sysman.emd_maintenance.remove_em_dbms_jobs;SQL> EXEC sysman.setEMUserContext('',5);SQL>
    REVOKE dba FROM sysman;SQL> DECLARECURSOR c1 ISSELECT owner, synonym_name nameFROM dba_synonymsWHERE table_owner
    = 'SYSMAN';BEGINFOR r1 IN c1 LOOPIF r1.owner = 'PUBLIC' THENEXECUTE IMMEDIATE 'DROP PUBLIC SYNONYM '||r1.name;ELSEEXECUTE
    IMMEDIATE 'DROP SYNONYM '||r1.owner||'.'||r1.name;END IF;END LOOP;END;/SQL> DROP USER mgmt_view CASCADE;SQL> DROP ROLE mgmt_user;SQL> DROP USER sysman CASCADE;SQL> ALTER SYSTEM DISABLE RESTRICTED SESSION;
    Note: The above will completely delete the DB Control repository from the database; under certain circumstances (e.g. you want to recreate the repository later on) the following statements may be sufficient to remove the repository:
    Logon SQLPLUS as user SYS or SYSTEM, and drop the sysman account and management objects:SQL> drop user
    sysman cascade;SQL> drop role MGMT_USER;SQL> drop user MGMT_VIEW cascade;SQL> drop public synonym MGMT_TARGET_BLACKOUTS;SQL> drop public synonym SETEMVIEWUSERCONTEXT;
    Option 5. Delete DB Control Configuration Files and Repository Objects using EMCA
    For DB Control 10.1.x, dropping both the configuration files and the repository objects is a two step process. Run the following two commands:
    <ORACLE_HOME>/bin/emca -x <sid><ORACLE_HOME>/sysman/admin/emdrep/bin/RepManager <hostname> <listener_port> <sid> -action drop
    For DB Control 10.2.x, both configuration files and repository objects can be deleted with a single command. Run the command:
    <ORACLE_HOME>/bin/emca -deconfig dbcontrol db -repos drop
    B. Create DB Control Objects
    Option 1. Create the DB Control Configuration Files
    Option 2. Create the DB Control Repository Objects and Configuration Files
    Option 1. Create the DB Control Configuration Files
    To create only the DB Control configuration files, skipping the repository creation (this would be done for instance if you dropped only the files and left the repository in place):
    For DB Control 10.1.x, run the command: <ORACLE_HOME>/bin/emca -rFor DB Control 10.2.x, run the command: <ORACLE_HOME>/bin/emca -config dbcontrol db
    Option 2. Create the DB Control Repository Objects and Configuration Files
    For DB Control 10.1.x, run the command: <ORACLE_HOME>/bin/emcaFor DB Control 10.2.x, run the command: <ORACLE_HOME>bin/emca -config dbcontrol db -repos create
    C. Recreate/ReConfig DB Control
    Option 1. Recreate the DB Control Configuration Files only (leave Repository intact)
    Option 2. Recreate the DB Control Configuration Files and Repository
    In 10.2, the EMCA commands can be used to reconfigure the existing installs without removing them first.
    Option 1. Recreate the DB Control Configuration Files only (leave Repository intact):
    For DB Control 10.2.x, run the command:
    <ORACLE_HOME>/bin/emca -config dbcontrol db
    Option 2. Recreate the DB Control Configuration Files and Repository
    For DB Control 10.2.x, run the command:
    <ORACLE_HOME>/bin/emca -config dbcontrol db -repos recreate
    For additional information on EMCA commandline options, please see the Oracle Enterprise Manager 10g Advanced Configuration Guide or see Note 330130.1 Overview Of The EMCA Commands Available for DB Control 10.2

  • SSH does not start after reboot

    Hi, I have a problem with my sshd daemon. I have updated my OS, I have changed the .pacnew files and tested service with "systemctl start sshd.service" and it worked good. I have run command "systemctl enable sshd.service" and command executed good. But after reboot service does not start.
    I have run "systemctl status sshd.service" and result is that service is loaded, but in Activa line it is inactive (dead).
    I dont know what is happening, why is it inactive if it is loaded?
    Thank you for you help.

    These are outputs:
    $ systemctl status sshd.service
    * sshd.service -OpenSSH Daemon
    Loaded: loaded (/usr/lib/systemd/system/ssh.service: enabled)
    Active: inactive (dead)
    $ systemctl status sshd.socket
    * sshd.socket
    Loaded: loaded (/usr/lib/systemd/system/ssh.socket: enabled)
    Active: active (listening) since Fri 2014-05-30 09:57:52 COT; 12min ago
    Listen: [::]:22 (Stream)
    Accepted: 0; Connected: 0
    It looks that socket is working, but service isn't. I have reviewed "journalctl -b" and sshd service isn't shown it.
    Last edited by mams827 (2014-05-30 15:25:18)

Maybe you are looking for

  • Using a file in a Dashboard Embedded Content

    If I remember correctly I could include a .pdf file in a dashboard (obiee 10g). Now in 11g, the embedded content properties points to an URL. I suppose I can still access a file (in a network drive or local drive for testing) but I am struggling with

  • How do I get "Media" to appear in my Sidebar?

    When I insert pictures, files etc into emails, the finder window very kindly shows "Media" as a drop down in the sidebar. But when I open finder by itself this drop down is not in the sidebar and I can find no way in preferences to choose to show it?

  • SELECT from MySQL, INSERT into Oracle

    Hallo, I am new to Java. My task is to collect data from about 30 tables inside MySQL database and then insert it to similar tables in Oracle. Script should copy data one a day, during the night. Number of rows in each table is about 30,000. MySQL ve

  • Suggestions: Mulitple Check Boxes in form

    Hi there. CS3, php & mySql. I'm busy doing a form for a real estate agent where they can add properties up for sale. My dilemma is that some fields have a possibility of up to 7 checks for one question. the problem is that DW only recognises the last

  • Restore screen does not funcion right

    Lately when I have been trying to restore something, the normal restore window with the back and forward arrows goes white or in other cases non visible, leaving me with the choise of guessing where the time line is supposed to be. I have no screen p