After latest firmware update, AppleTV2 no longer sends signal

So I updated my AppleTV2 with the latest firmware, and now it no longer sends a signal out.
Has Apple stated when they're going to fix this?

MicroUSB cable doesn't fit in AppleTV2. Try again.
Edit: Apparently the MicroUSB cable I was trying to use wasn't 'micro' enough.
I'm now trying again with a MicroUSB cable used to recharge my Xbox 360 wireless headset. Heh... the irony is amusing.

Similar Messages

Can't send mail after latest firmware update

My outgoing mail won't go out after the latest firmware update. I have 4 different accounts and none are working. Tried in various locations. Any ideas would be appreciated. Thanks

Was this for 10.5.8???
Others have reported it for 10.6.8 & up...
http://x704.net/bbs/viewtopic.php?f=12&t=6118

Internet stopped working on MBA after latest firmware update. Help please!!!

Internet stopped working after installing the latest firmware update. WiFi still connects to router, our other mac desktop still connects to internet as usual (same network). I can't even re-install the MBA OS since it needs an internet connection!!!
Any ideas?

FIXED.
I swapped our wireless router for a newer one, internet seems to work fine again (we were sent a new one by our internet provider which we never set up until now).

My macbook pro screen remains grey after latest firmware update

i just had the update notification for the latest firmware, proceeded to do so, and the screen remains grey, its been more than one hour and still grey, since its a firmware update i don't want to disturb it, but could it be that is taking so long?

Reboot it by pressing the power button down hard to force a shutdown.
If your still having problems, take it to Apple. I hope you have AppleCare becuase if they can't fix it, it's a new logicboard.

TC issues after latest firmware update

Here is the skinny, my TC went through the normal firmware update a bit ago. Wednesday my Internet stopped working, when I use the Airport Utility app it showed the TC online, at first, then it gave me the error that the TC did not have a valid IP. Thought might have been a problem on my ISP's end so I grabbed another router and set it up Internet no problem. Has to be the new firmware right so I pushed the firmware back 3 versions, and still the same thing no valid IP but connected to the Internet but no HDD (Yes it said not a valid IP but connected to the Internet on one wireless PC). Everything else in the house would not connect to the TC they could see it but when you went to connect never asked for a password and I got the spindle of death type deal. I saved my settings and did a hard reset with the button on the back of the TC, started over and rebuilt the connection, same thing happened not a valid IP. I have read that Apple released 3 different firmware updates supposedly the last one works, it doesn't when I load the firmware I get the same error TC does not have a valid IP. I need some help, I have cycled through power down and power up situations over and over. Anyone have any other suggestions?

Need some more info.
What is the modem.. make and model?
Is it both modem and router or just a modem?
What is the actual model of the TC.. the number from the base.. A1xxx where the x are numbers.
The latest firmware is an issue.. that is 7.6.4 and you should go back to 7.6.1
But it does seem hard to get rid of properly.
I want you to do a factory reset not just a hard reset.
Universal Factory Reset.. any model TC or AE.
Unplug your TC/AE from power or turn off at the power point.
Hold in reset. and power the TC/AE back on.. all without releasing reset and keep holding in for about 10sec. (this is often difficult without a 2nd person or a 3rd arm).
Release it when the status light flashes rapidly. If it doesn’t flash rapidly you have missed it and try again.
Note..
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations of the router.
No files are deleted on the hard disk in a TC.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
Please redo the setup using all SMB names.. that is short, no spaces and purely alphanumeric characters.
eg TCgenx (use actual gen if you want) for base station name.
TCwifi for wireless name. (or TC24ghz and TC5ghz which is well worth naming both bands so you can test more carefully).
Please download and install a v5 utility on a computer if any of them use up to Mountain Lion.
Tell us what OS the computers are running and I can tell you how to install the old airport utility.
Test the TC in bridge to your other router is also a good alternative.

Windows 7PC no longer detects iPad 3 after latest itunes update. Why?, Windows 7PC no longer detects iPad 3 after latest itunes update. Why?

Windows 7PC no longer detects iPad 3 after latest itunes update. Why?,

iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
 Cheers, Tom

Anyone experiencing screen resolution problems after latest Mavericks Update?

Anyone got a blurred monitor after the latest Mavericks Update?
I am running Mavericks 10.9.2 on a Mini Mac with a Logic TV/Monitor. Since the latest Mavericks update I no longer have the option in settings to scale to 1600 x900. Since this gives the best picture on my monitor I now have either a blurred screen with large text or a blurred screen with very tiny text. No other options that give a 'normal' display seem available now, after allowing the 'Update'. The update claims to be addressing faults on the MacBook display, which it may well do, but it has also apparently screwed up Mac Mini screen resolution Options for some of us.
I have reverted back to 10.9.2 and turned off automatic updates, but I can't stay that way indefinitely.
I've tried to find an e-mail address or phone number to log my complaint to Apple but to no avail. (I guess they would otherwise be inundated with customer complaints so keep that kind of information under wrapps). Anyone got any ideas?

I'm not having any problems with dual DVI connected Samsung 21.5" monitors in 10.9.3
What connection (adapter, cable, etc.) are you using..?
To send Apple Feedback, go to > Apple - Mac OS X - Feedback
If your looking for better resolution options, try > Mac App Store - Display Menu

HT3728 Does factory reset go back to latest firmware update.

I have resently updated my airport express to latest firmware. The airport express is configured as an extension to my wifi with an Extreme as main device.
Shortly after the firmware update (1-2 days) the express stopped working and status light turned yellow.
I have since then tried to do factory reset several times without getting the device up and running again.
When doing factory reset the status light turns yellow after releasing the button and stays amber with short interval with green (1 second every minute or so)
I have not been able to discover the express from my iPad, iPone or iMac again.
Could the reaons be latest firmware update?
Any advice to get it back to normal?
Thanks,
Per

Does factory reset go back to the latest firmware update.
A Factory Default Reset will not affect the installed firmware.
Shortly after the firmware update (1-2 days) the express stopped working and status light turned yellow.
A solid amber light is unfortunately an indication that the internal power supply inside the AirPort Express is failing, or has failed.
I have since then tried to do factory reset several times without getting the device up and running again.
The AirPort Express has failed, and will need to be replaced.
When doing factory reset the status light turns yellow after releasing the button and stays amber with short interval with green (1 second every minute or so)
This is yet another confirmation that the Express has failed, and will need to be replaced.

Zen Touch latest Firmware Update...player not connec

I tried installing the latest Firmware update for my Zen Touch (released 2-09).
The player is connected and recognized by Windows and the Media Explorer. However, when I try to install the new Firmware it keeps saying "player not connected".
I tried d/l two different language packages cause I wasn't sure what counted - player language or operating system langauge. Anyway, that didn't make a difference.
So what do I do? I have no idea where to start. It's firmware for the correct device connected through Windows XP.
I have made a firmware update before, which worked fine. After that I updated the media explorer software.
Help is very much appreciated! Thank you in advance.
-tina-Message Edited by tinas on 2-0-2005 08:56 PMMessage Edited by tinas on 2-0-2005 09:00 PM

Perhaps it's worth making sure no software is using the player, so reboot the PC, and turn off the Creative Detector. Then try again.
Are you trying to upgrade to the .0.03 version?

Mid 2006 iMac Boot Problem (Since latest firmware update)

I have a Mid 2006 17" iMac. Ever since the latest firmware update in early December, about every other startup I've been having boot problems. After the white screen with the Apple Logo and the spinning wheel it goes to a blue screen like normal, but instead of the 'Loading Mac OS X' white window popping up it stays blue and the spinning loading wheel starts. I've left it loading for quite a while before and nothing changes. I have to do a force shut off by holding the power button. and then I start it up and it will boot normally.
Any help would be appreciated.
Thanks!

Actually, I think it'san early 2006.

IPad mini will not let me access mail after latest software update, 6.1.2, seems to want me to sign in, but whenever I type my Id ad password it just says that the mail account already exists.. Still can't open my mail!

iPad mini will not let me access mail after latest software update, 6.1.2, seems to want me to sign in, but whenever I type my Id ad password it just says that the mail account already exists.. Still can't open my mail!
Help would be appreciated.

PhotogYogi wrote:
I Have the same issue on a brand new iPad mini 2. My battery is only lasting up to 5 hours. I went on chat with Apple last night and they said my battery is fine and its a Safari issue. I'm literally losing 1% every 3-4 minutes. I tried recalibrating my battery, signing out of iCloud, shutting off all locations, turning off background app refresh, restoring network settings, restoring all, and finally restoring from iTunes with no luck. This is just awful. I got this iPad so I could use it on my long flight for a trip I have coming up, and unfortunately, it's not going to last that long, plus I'm concerned about how many times i will be recharging my battery because of this since battery's do have a life cycle dependent on the number of charges. This is frustrating and needs to be fixed ASAP and addressed by Apple.
By the way, Apple told me to bring my device to the Apple Store because it's still under warranty. That's great and all, but I'm going to waste my time if there is no fix for this issue.
Ok so you want Apple to address the problem, but yet you don't want to take it to them just in case they can't fix it? What if they can fix it? Complaining here certainly won't fix it.

Bluetooth volume not working after last firmware update

After the latest firmware update I'm not able to adjust the volume. Both when i use the volume rockers on the side, or try it via settings, the indicator shows changeing volume - but there are no difference. VERY ANOYING!
any solution planned for att this issue?
Edit; just notice that the bluetooth volume is working on headset but not on devices with only media playback. (Working with SBH20 but not with AV-receiver or bluetooth speaker)

I can confirm that my Z2 bluetooth volume control stops working when i use it with my logitech bluetooth speaker.
Bluetooth volume control does not work when I use Spotify, TuneIn Radio Pro, SoundCloud or Walkman. However the seemingly same bluetooth volume control works when I use Poweramp.
At first I tought that the problem was related to streaming music but since the Walkman bt sound volume does not work on local media files it is not the case.
The bluetooth volume control works with my Nexus 7 and Lumia 1020.
Does anyone have heard from Sony regarding this issue?

Wlan error after a firmware update

Ok there seem to be many posts about this issue but i cannot find anything that seems to work for me.
I not to recently updated my N95 8Gb firmware to 20.0.16 and found that I was having errors with WPA on WLan, previously I had no such problem and the issue only occured after the firmware update.
to add some more info I am on a network with a linksys wrt300n
I have tried wep it works but dont want to compromise security.
All computers on the network are using wireless g and the key is definitely correct when entered
any help would be most appreciated

I don't have N95, but if the firmware is updated to latest version the wpa most likely wpa2. Having wpa in place of wep gives only very little added security for a determined hacker! It will only takes 30min to an hour to crack that. Security like that deter only the free net riders. Try if there is upgrade for your modem/router, its usualy the case. For home network wep or wpa sufficed.
Knowledge not shared is knowledge wasted!
If you find it helpfull, it's not hard to click the STAR..

Safari can't connect after latest Lion update

Just updated my software and now safari can't connect to websites. It connects for a bit then after awhile it will no longer connect. Firefox and Chrome are connecting fine so this is a safari only issue with the latest update.
Safari Version 5.1.5 (7534.55.3)
Quiting safari and restarting works for a little while then eventually 'can't connect to server' eventually appears. I'm going back to firefox until this is resolved.

Linc Davis
Currently Being Moderated Re: Safari can't connect after latest Lion update
Apr 2, 2012 5:35 AM (in response to rtorca)
Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up a guest account” (without the quotes) in the search box.
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem(s)?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
Note: If you’ve activated “Find My Mac” or FileVault in Mac OS X 10.7 or later, then you can’t enable the Guest account. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.
Hi I have the same sort of problems I carried out the two tests and the problem appears to only be in my profile not in guest profile. Is there a cure?

Attempted Iphone 4 update to latest firmware update "failed"

Ive attempted to update the Iphone to the latest firmware update and it has failed 3 times, the final time it looked as though
it worked but stopped and went into new mode to go-back to Restore to old setting. Now it is locked up and asking me for the admin backup password
and everything I've tried is not working.. Not sure what to do at this point.
The laptop I'm using is a Panasonic CF29 and running Windows XP with SP3 installed.
I'm open to any ideas at this point.
Thanks Artman

Then it's pretty hopeless. Normally the error message remains displayed until you click "OK", so it's surprising that you didn't see it. You can try the shotgun approach; just try a bunch of stuff in the hopes that it will work. But first I suggest trying to update it again, and this time watch it. The following list covers the most common causes of update failures:
Open a Command window and type the command "netsh winsock reset"
Reboot your computer
Disable your antivirus and firewall
Launch iTunes
Connect the phone using a USB port directly on the computer, not a hub
When the phone is recognized in iTunes click on it, then click Restore
If the phone is NOT recognized in iTunes, disconnect it, the hold the HOME and SLEEP buttons for exactly 10 seconds until the screen goes black, then release SLEEP but continue holding HOME while you connect the cable and continue holding HOME until iTunes recognizes a phone in recovery mode
If the update completes you are in business
You mentioned being prompted for a backup password. If your backup is encrypted you will need to know the password to complete the restore; if you don't know it you will have to restore as New and manually add your content back. If it is encrypted you really did enter a password for it once, whether you remember doing so or not.

After latest firmware update, AppleTV2 no longer sends signal

Similar Messages

Maybe you are looking for